Thankyou for the help!! I wasnt putting on the brakes, I was removing them because I wanted to step up a bit because i wanted to learn some tricks but the brakes were preventing me from doing so. The instruction manual and other youtube videos wernt that helpful but this video was amazing!!
@Branfllake10 ай бұрын
How do I find a backstop to buy on its own?
@ZojieRainePlays Жыл бұрын
No matter what i do, mine wont tighten again. I'm so confused about which direction to turn it.
@ZojieRainePlays Жыл бұрын
I actually did figure this out! My neurodivergent brain needs EXACT specific instructions and in case anyone else is in the same boat as me... If you're wondering which skate, the standard is the right but you can do it on either side, whatever is comfortable. As for which direction to turn it, righty tighty applies here. Most importantly, you need to use the LONGER AXLE for the brake. This is not mentioned in the vid bc it's probably obvious to neurotypicals. Someone needs to make a neurodivergent tutorials channel lol.
@AKIYIAKELLY Жыл бұрын
Thanks
@user-dt5wo5ju1p Жыл бұрын
Well it now makes sense why I almost died wearing them with no breaks 😅
@hihihi446 Жыл бұрын
This was very
@angelicanetherly5662 Жыл бұрын
YOU are amazing 🫡
@gakkibear Жыл бұрын
Thanks, was so clear. Maybe dumb question, but is it possible to change the brake pad into something else? a different shape stopper or something?
@erinharders4039 Жыл бұрын
Did the blades comes with the break? Or did you have to buy it separately?
@Myla_614 Жыл бұрын
Comes with the break
@LINDSAYLIKEOMG Жыл бұрын
Thank you, this really helped me!!
@GwenTulin Жыл бұрын
Thank you!!!! The written directions were totally befuddling, you saved me hours of sadness!
@AyQueChiquita2 жыл бұрын
Super helpful explanation, thank you! I installed the breaks without any issue!
@bh83672 жыл бұрын
What protective pads do you use?
@maiarakrauzer83032 жыл бұрын
Thank you sooo much!
@lorenagarzon9932 жыл бұрын
Thanku 💖💖💖💖💖💖
@claudiavenegas3152 жыл бұрын
Thank youuuuu
@vee24602 жыл бұрын
thank you so much for the tip to twist both pieces at the same time! i was struggling with keep them both steady while tightening
@adventure1952 жыл бұрын
Thank you SO MUCH for this video! I never would have figured it out otherwise.
@ashleeeroflz2 жыл бұрын
Thank you! This helped me out A LOT
@annachavez33902 жыл бұрын
So incredibly helpful!!!
@melaniegraces2 жыл бұрын
Omg so helpful thank you!
@Mango-rt1pf2 жыл бұрын
Omg tysm! I was so confused on how to make them work this helped me out a bunch
@theresadean79782 жыл бұрын
The brake looks longer than the wheels . How does it not drag on the ground?
@wolfiegrl57162 жыл бұрын
That’s the problem I’m having it’s dragging
@JanAly2 жыл бұрын
@@wolfiegrl5716 I’m not sure if you’ve solved it but there’s two slots you can put the break in. One is dragging and one is slanted. Figured that out pretty quick cuz mine were dragging too. Take em apart and you’ll see
@crunchymommy8012 жыл бұрын
Thank you for making this video!!
@faithe.10662 жыл бұрын
thank you! so helpful!
@lilymorales66952 жыл бұрын
Do you know where I can buy the brake? I have looked everywhere for it. My daughter has worn hers out and is so sad that we cannot find a new brake.
@puck24703 жыл бұрын
Thank you!!
@cillababiee3 жыл бұрын
Thanks girl, just got my impalas and couldn’t figure out how to put on the brake hahahaha
@happypure133 жыл бұрын
Thank you! This video was a great help as my skates were bought used and didn't come with a manual. 😊
@kaungkaung41613 жыл бұрын
Cute
@ErikaVerduzco3 жыл бұрын
I can’t get my wheel off :(
@eliwashington6673 жыл бұрын
Stuff you wanted me to put the shit don’t work I feel weird Amazon I just saw that you put that together fuck
@ShanteleD3 жыл бұрын
My feel screw won’t come out or even loosen?
@rose-bl2wx3 жыл бұрын
i'm having exactly the same problem - have you figured it out yet?
@toraay25023 жыл бұрын
@@rose-bl2wx you have to make sure you’re twisting it in the opposite direction
@jasmine-wl7rp3 жыл бұрын
I’m having this issue too
@taylorcrowley58433 жыл бұрын
I was having the exact same issue, so I used 2 allen wrenches (already had a few laying around) instead of the tool the skates come with. Twist in opposite directions - feels like you're doing it wrong at first but they'll come loose pretty quickly!
@hannahbanana892 жыл бұрын
@@taylorcrowley5843 THANK YOU SO MUCH
@itsphillybr03 жыл бұрын
so helpful thank you for this!!
@ctran19553 жыл бұрын
havent bought it yet but i find it very strange they dont come preinstalled with the brake tbh. is this normal for rollerblades i wonder. i would imagine beginners use brakes, and impala seems like a new trendy company geared towards beginners. also, an experienced skater would know how to easily uninstall the brakes, compared to a lost beginner LOL.
@JessicaSmith-pe6ii3 жыл бұрын
From what I can tell breaks on inlines isn’t common and is usually only used by beginners and is something people take off as soon as they’re more stable. I don’t think most come with one installed even ones designed for beginners but will include one, I think it’s also a good way for beginners to familiarise themselves with adjusting the skates early on. Some beginners won’t even put the brake on and just learn how to stop without it like majority of inline skaters do
@TheWickedmaddie3 жыл бұрын
Thank you soooo much for this. Very helpful with my installation of it.
@angellamst42153 жыл бұрын
I'm waiting for mine are the breaks in or I have to buy them?
@Eveningstar8363 жыл бұрын
thank you !!!!!
@tylerjrichards_ds3 жыл бұрын
Love it! Thanks for the great video, wish I could have been there!
@mackenziepatel92623 жыл бұрын
Thanks for watching it Tyler!! I'm sure we'll see you at another event soon :)
@aro85192 жыл бұрын
very nice video good job
@victoriughh3 жыл бұрын
Thanks so much!
@katielogan44243 жыл бұрын
This was BEYOND helpful--I was ready to give up until I found your video and now my brake is on! Still took some patience, but I'm ready to ride now :)
@Patricia-ym9we3 жыл бұрын
Thank you. Just ordered some and if it wasn’t for this video I most likely wouldn’t have known how to install the stopper.
@BeckieT23 жыл бұрын
So helpful😅
@isaidwhatisaid84703 жыл бұрын
SO HELPFUL!!!! Thank you for saving me from many slips and falls! ❤❤
@roseluna71953 жыл бұрын
fextyhackers,com, thanks for the great amount you sent to me
@chantecenewton12363 жыл бұрын
Thank you so much for this video. I thought I was missing a brake lol.
Пікірлер
30 minutes in and I still can't get the wheel off
thankssss
Very niceee! 🤩
Thankyou for the help!! I wasnt putting on the brakes, I was removing them because I wanted to step up a bit because i wanted to learn some tricks but the brakes were preventing me from doing so. The instruction manual and other youtube videos wernt that helpful but this video was amazing!!
How do I find a backstop to buy on its own?
No matter what i do, mine wont tighten again. I'm so confused about which direction to turn it.
I actually did figure this out! My neurodivergent brain needs EXACT specific instructions and in case anyone else is in the same boat as me... If you're wondering which skate, the standard is the right but you can do it on either side, whatever is comfortable. As for which direction to turn it, righty tighty applies here. Most importantly, you need to use the LONGER AXLE for the brake. This is not mentioned in the vid bc it's probably obvious to neurotypicals. Someone needs to make a neurodivergent tutorials channel lol.
Thanks
Well it now makes sense why I almost died wearing them with no breaks 😅
This was very
YOU are amazing 🫡
Thanks, was so clear. Maybe dumb question, but is it possible to change the brake pad into something else? a different shape stopper or something?
Did the blades comes with the break? Or did you have to buy it separately?
Comes with the break
Thank you, this really helped me!!
Thank you!!!! The written directions were totally befuddling, you saved me hours of sadness!
Super helpful explanation, thank you! I installed the breaks without any issue!
What protective pads do you use?
Thank you sooo much!
Thanku 💖💖💖💖💖💖
Thank youuuuu
thank you so much for the tip to twist both pieces at the same time! i was struggling with keep them both steady while tightening
Thank you SO MUCH for this video! I never would have figured it out otherwise.
Thank you! This helped me out A LOT
So incredibly helpful!!!
Omg so helpful thank you!
Omg tysm! I was so confused on how to make them work this helped me out a bunch
The brake looks longer than the wheels . How does it not drag on the ground?
That’s the problem I’m having it’s dragging
@@wolfiegrl5716 I’m not sure if you’ve solved it but there’s two slots you can put the break in. One is dragging and one is slanted. Figured that out pretty quick cuz mine were dragging too. Take em apart and you’ll see
Thank you for making this video!!
thank you! so helpful!
Do you know where I can buy the brake? I have looked everywhere for it. My daughter has worn hers out and is so sad that we cannot find a new brake.
Thank you!!
Thanks girl, just got my impalas and couldn’t figure out how to put on the brake hahahaha
Thank you! This video was a great help as my skates were bought used and didn't come with a manual. 😊
Cute
I can’t get my wheel off :(
Stuff you wanted me to put the shit don’t work I feel weird Amazon I just saw that you put that together fuck
My feel screw won’t come out or even loosen?
i'm having exactly the same problem - have you figured it out yet?
@@rose-bl2wx you have to make sure you’re twisting it in the opposite direction
I’m having this issue too
I was having the exact same issue, so I used 2 allen wrenches (already had a few laying around) instead of the tool the skates come with. Twist in opposite directions - feels like you're doing it wrong at first but they'll come loose pretty quickly!
@@taylorcrowley5843 THANK YOU SO MUCH
so helpful thank you for this!!
havent bought it yet but i find it very strange they dont come preinstalled with the brake tbh. is this normal for rollerblades i wonder. i would imagine beginners use brakes, and impala seems like a new trendy company geared towards beginners. also, an experienced skater would know how to easily uninstall the brakes, compared to a lost beginner LOL.
From what I can tell breaks on inlines isn’t common and is usually only used by beginners and is something people take off as soon as they’re more stable. I don’t think most come with one installed even ones designed for beginners but will include one, I think it’s also a good way for beginners to familiarise themselves with adjusting the skates early on. Some beginners won’t even put the brake on and just learn how to stop without it like majority of inline skaters do
Thank you soooo much for this. Very helpful with my installation of it.
I'm waiting for mine are the breaks in or I have to buy them?
thank you !!!!!
Love it! Thanks for the great video, wish I could have been there!
Thanks for watching it Tyler!! I'm sure we'll see you at another event soon :)
very nice video good job
Thanks so much!
This was BEYOND helpful--I was ready to give up until I found your video and now my brake is on! Still took some patience, but I'm ready to ride now :)
Thank you. Just ordered some and if it wasn’t for this video I most likely wouldn’t have known how to install the stopper.
So helpful😅
SO HELPFUL!!!! Thank you for saving me from many slips and falls! ❤❤
fextyhackers,com, thanks for the great amount you sent to me
Thank you so much for this video. I thought I was missing a brake lol.
Thanks you so much!!