Hi MUST Spear ✋; can you explain what is the :-32where it come from ? I new 105 and x2 please share thank you for explain every thing except 32 I don't get it 👍👍🙏.
@arnodesmedt30293 ай бұрын
Is it me, or did you forget to count the wishbone length?
@MikeTheGuy33Ай бұрын
Yes, it's should be 105 - 4,5 (wishbone one side), so he has a bit longer for 3,3
@PeteJDunham7 ай бұрын
Hello, Bro. Nice video. But there's some miscalculations in my opinion. The real working length your gun could offer (from the center of the band in muzzle to the back end of the sharkfin) is 105 cm. Then it looks like you have something about 7 cm wishbones with fastening loops. Divide it by two - 3,5 cm, and 1 cm of rubber on the end of the band to secure the loop. So, you have 4,5 cm of "dead length" from your 105 cm "working length", which does not give any rubber strecth and power. So, 105 - 4,5 = 100,5 cm of actual stretch of 65/5=32,5 cm band. So, the actual real stretch ratio is 100,5/32,5=3,09 or 309% 💁♂️
@P.S.009 Жыл бұрын
Can you please explain why there are 3 shark fins on the spear?
@djnree Жыл бұрын
hey bro, great video, i have wood gun 110, and pathos shaft 7mm 135cm on it should i use sigal bands (small id reactive evo) 2 x 16mm or 2 x 14 mm for it? i want to use 2 x 16 mm, do you think it is gonna be too powerfull?
@mouezmoez6342 Жыл бұрын
please, lenght for double 16 bands of rob allen tuna 130 with 7.5 shaft
@mohamedjerbi4283 Жыл бұрын
nice
@DeepBlueSpirit2 Жыл бұрын
Good idea to explain all in writing :)
@MrTheAkheron2 жыл бұрын
Is the tire you use 16mm?
@MsNordsee2 жыл бұрын
Finally a detailed enough explanation! Super well done. Congrats and thanks!
@VidarrKerr2 жыл бұрын
Dude, just talk in your native language. YT auto-generates subtitles in all languages.
@xjinit2 жыл бұрын
Is the wishbone not calculated in the length of the bands? The longer or shorter the wishbone will change the stretch correct?
@checkmateChannel Жыл бұрын
I ask myself the same and no one seems to lose a word about it 🙄🙄
@MikeTheGuy33Ай бұрын
It has 307% elongation, not 330%.
@lmnop20sharks2 жыл бұрын
Hi, I am planning to make a 120 cm wooden spear gun. The shaft is a 7mm/160cm. Which bands would be better to use 16mm or 14mm?
@VidarrKerr2 жыл бұрын
16mm.
@DeepBlueSpirit2 Жыл бұрын
A 7mm shaft with 160 cm length is best propelled with 14 mm small inner diameter bands, stretched at 360%. For 7.5 mm shaft use 14.5 mm small inner diameter stretched at 380%. Both options get you lots of power but also a 'smooth' acceleration that equals to nice range and good accuracy. The 7.5 shaft oscillates less than a thinner one, has also more punch when hitting fish (penetration). But a 7mm is fine, tho.
@rjfspearfishingtrip19642 жыл бұрын
Sir, how long your shaft? Is it ok if i use a double flopper for this set up?
@cookislandskids17412 жыл бұрын
how did you get your 105cm?
@nholdlhungs98022 жыл бұрын
Galing 'mo
@parlaysenders79322 жыл бұрын
do you use a slip knot to tie the ends off
@passenger84682 жыл бұрын
Are there any differences in the formula when we are calculating it for inverted roller? Awesome video
@zakhu49712 жыл бұрын
Hello from iraq with you amazing
@michailyamin73143 жыл бұрын
Man - you are cool teacher!!! Thanks. Without words - but everything is clear and understandable.
@mustspear70092 жыл бұрын
Thanks you so much for your comment my friend, I hope this helped you! =)
@zaydsteel8043 жыл бұрын
How about different size rubber?, like a 12mm or 14mm or 18mm etc, any formula?
@mustspear70092 жыл бұрын
Usually there are tables for famous brands, that state what is best for each diameter and this is where I find the percentages used in the video. However, as a rule of thumb, 300% is optimal. Too much and your bands wear out quickly, too little and you sacrifice their full potential for longevity...Hope this helps!!! Have a good one!
Пікірлер
Hi MUST Spear ✋; can you explain what is the :-32where it come from ? I new 105 and x2 please share thank you for explain every thing except 32 I don't get it 👍👍🙏.
Is it me, or did you forget to count the wishbone length?
Yes, it's should be 105 - 4,5 (wishbone one side), so he has a bit longer for 3,3
Hello, Bro. Nice video. But there's some miscalculations in my opinion. The real working length your gun could offer (from the center of the band in muzzle to the back end of the sharkfin) is 105 cm. Then it looks like you have something about 7 cm wishbones with fastening loops. Divide it by two - 3,5 cm, and 1 cm of rubber on the end of the band to secure the loop. So, you have 4,5 cm of "dead length" from your 105 cm "working length", which does not give any rubber strecth and power. So, 105 - 4,5 = 100,5 cm of actual stretch of 65/5=32,5 cm band. So, the actual real stretch ratio is 100,5/32,5=3,09 or 309% 💁♂️
Can you please explain why there are 3 shark fins on the spear?
hey bro, great video, i have wood gun 110, and pathos shaft 7mm 135cm on it should i use sigal bands (small id reactive evo) 2 x 16mm or 2 x 14 mm for it? i want to use 2 x 16 mm, do you think it is gonna be too powerfull?
please, lenght for double 16 bands of rob allen tuna 130 with 7.5 shaft
nice
Good idea to explain all in writing :)
Is the tire you use 16mm?
Finally a detailed enough explanation! Super well done. Congrats and thanks!
Dude, just talk in your native language. YT auto-generates subtitles in all languages.
Is the wishbone not calculated in the length of the bands? The longer or shorter the wishbone will change the stretch correct?
I ask myself the same and no one seems to lose a word about it 🙄🙄
It has 307% elongation, not 330%.
Hi, I am planning to make a 120 cm wooden spear gun. The shaft is a 7mm/160cm. Which bands would be better to use 16mm or 14mm?
16mm.
A 7mm shaft with 160 cm length is best propelled with 14 mm small inner diameter bands, stretched at 360%. For 7.5 mm shaft use 14.5 mm small inner diameter stretched at 380%. Both options get you lots of power but also a 'smooth' acceleration that equals to nice range and good accuracy. The 7.5 shaft oscillates less than a thinner one, has also more punch when hitting fish (penetration). But a 7mm is fine, tho.
Sir, how long your shaft? Is it ok if i use a double flopper for this set up?
how did you get your 105cm?
Galing 'mo
do you use a slip knot to tie the ends off
Are there any differences in the formula when we are calculating it for inverted roller? Awesome video
Hello from iraq with you amazing
Man - you are cool teacher!!! Thanks. Without words - but everything is clear and understandable.
Thanks you so much for your comment my friend, I hope this helped you! =)
How about different size rubber?, like a 12mm or 14mm or 18mm etc, any formula?
Usually there are tables for famous brands, that state what is best for each diameter and this is where I find the percentages used in the video. However, as a rule of thumb, 300% is optimal. Too much and your bands wear out quickly, too little and you sacrifice their full potential for longevity...Hope this helps!!! Have a good one!