Пікірлер

• 
  @bigredinfinity31262 ай бұрын

  Any updates to the car is it still going how many miles did you put on it what issues .I just took the plunge and running my E 250 on veg diesel and just really worried

• 
  @SergiuHunter2 ай бұрын

  rubish video

• 
  @projectperkup13723 ай бұрын

  Great video and explained perfectly much appreciated

• 
  @user-ze1dw1wb6u5 ай бұрын

  What is the name of your wood stove?

• 
  @Themetalman8853 ай бұрын

  See other replies for links and info

• 
  @TrumpforPrimeminister20245 ай бұрын

  Cast aluminum.. like an engine block eh?

• 
  @aguapurification5 ай бұрын

  I had an e10. I put a quiet pump on my 5kw heater. It worked for a month. Idk if the quiet pump was rated for 5kw, but when I put the original loud pump back on it, then it worked. Glad I didn’t have to take it apart to clean soot and air intake Btw it looks like ur pump is upside down to me. I’ve heard it can have air bubbles if not at the proper angle

• 
  @hollyhefner81846 ай бұрын

  Good tips. What kind of little wood stove are you using?

• 
  @Themetalman8853 ай бұрын

  I made the burner,I’ve posted links and info in the replies to the video

• 
  @yinglyca16 ай бұрын

  Let's see the Atomizer screen.

• 
  @pstoneking34186 ай бұрын

  I got an E10 error because I had too much of a voltage drop between the heater and my battery. This didn't allow the pump to run initially when tge glow plug was activated. During glow plug activation you could also see the display screen dim, indicating a voltage drop. Replacing the wiring with a larger Guage wire from the heater to the battery solved that problem. The end result was no fuel was being pumped.

• 
  @trfremre6 ай бұрын

  I will have the d3f but how does mine go at 20 to 30

• 
  @Del-West-Watson6 ай бұрын

  My heater says, "heater over temperature" code e10. ?? Literally after 5mins of running

• 
  @rorymax82336 ай бұрын

  Nice maintenance video 👍

• 
  @marius83497 ай бұрын

  The most important is to clean the mesh inside the steel burner, the breather hole and the atomiser mesh, eventually the glow plug, the rest is not that important. If you don't clean the aforementioned you'll get white smoke guaranteed.

• 
  @grahameelliott-kr3mr7 ай бұрын

  How long did it live

• 
  @this-is-slammin-5497 ай бұрын

  Brake cleaner would do much better job of cleaning that burn chamber

• 
  @leviscott85196 ай бұрын

  Actually soaking carbon buildup in hot soapy water or even better steam cleaning works great! I once left a set of cylinder heads that were caked with carbon upside down outside overnight. it rained that night and the combustion chambers filled with water. I used a wire wheel to clean them up but the water soaking overnight caused the carbon to flake off nicely I could see the big time flaking when I dumped the water out of them that wasn't there the day before. I did use brake cleaner for the final clean on the gasket mating surface. Now I take a spray bottle of water with engine hot at idle and spray the water straight into the intake. cleans better than some solvents in most cases. No joke!

• 
  @leviscott85196 ай бұрын

  Brake clean does work good for a final cleaning though. If its oil/grease yes brake clean after a diesel brush scrub because it brakes down the grime and doesn't evaporate quick like harsh solvents/brake clean. Iv been around the engine building block.

• 
  @LucianStroie-kl4hi7 ай бұрын

  Thx bro. You fixed my heater. I've got and clogged air admission. But look again into the fixing angle of diesel pump. It can be critically important

• 
  @LucianStroie-kl4hi7 ай бұрын

  Thanks for the advice. I think u got the fuel pump wrong. It should point up the pipe to heater at least 30 degrees to bleed away any cavitation bubble and not get stuck and pump and air cushion! I never seen a pump mounted this way

• 
  @borguteklatpif75377 ай бұрын

  Thx a lot dude!

• 
  @user-yo1pk4ky4k7 ай бұрын

  All around the world people are plopping down heaters, trannys [transmissions!], lawn mower engines, etc. on the kitchen table and throwing the fix to them. The Mr. Fix-it instinct is unstoppable.

• 
  @potatoskins81557 ай бұрын

  Any vhance you can link the parts you used ?

• 
  @ralphgilmore77228 ай бұрын

  You did not replace or clean the glow plug strainer screen.

• 
  @greenspiral29558 ай бұрын

  Where did you get the stove from??

• 
  @Themetalman8853 ай бұрын

  See other replies for links

• 
  @jasonbrouse46358 ай бұрын

  I GOT A E -08 THEN A E-10 IN A METER OF WEEKS. MY FUEL PUMP MOUNT BROKE OFF. THE PUMP FLIPPED UPSIDE DOWN. I FIXED THE ANGLE TAPPED IT A COUPLE TIMES. WORKS GOOD AGAIN. HAD TO SHARE THAT. AND THANKS

• 
  @user-ls6qk7cx7f8 ай бұрын

  Really helpful man, love this style of DIY video, very easy, simple and straight to the point. Thanks 👍❤

• 
  @moobaz86759 ай бұрын

  Useful, thanks.

• 
  @leeowenbarnes198010 ай бұрын

  Hi there bud what speed controller did you use have you a link I have the d3f

• 
  @NewLife-qj9mx10 ай бұрын

  Did I miss something or did you skip cleaning the fuel screen? 🤔

• 
  @windandsolar201311 ай бұрын

  You haven't cleaned the most important and critical part! The burner 😢🤦‍♂️

• 
  @greenspiral295511 ай бұрын

  Love, love love that wood burner, where did you get it from? There is a simpler version on ebay but it does not have the 2 door system :/

• 
  @Cubrider11 ай бұрын

  I have 07 code on a new heater, ive swapped motherboard and display i have 13.49v and ive cut out and soldered main block connector still getting e07 code. Any ideas? Did work occasionally from new

• 
  @colebrittner39344 ай бұрын

  Any luck?

• 
  @Cubrider4 ай бұрын

  @colebrittner3934 no I tried almost everything but I git a refund and bought another thats Neen fine. Only good news was I got to keep the broken one for spares

• 
  @puresim316nosimracingnolif3 Жыл бұрын

  Were do you buy the front motor from buddy

• 
  @ANDREW_ACV2 Жыл бұрын

  How work that?

• 
  @okwonneezy3972 Жыл бұрын

  What kind of motor is that ? And where do I get it?…. 3D print came out awesome !

• 
  @rafaeladamovic330 Жыл бұрын

  Where can i buy that wood stove

• 
  @felixcat9318 Жыл бұрын

  Neat stove, one of the better four inch box steel models I've seen. For a project I bought all the metal pieces I needed off eBay and got a Lidl welder to make one specifically to fit a limited space (wall mounted). It was enjoyable to do and the results were great, and it was very cost effective too, and I still have my welder. My personal stove is a Fatsco Pet Stove, a cast iron and marine grade stainless steel model that's been in production for over a century!

• 
  @putheflamesoutyahoo1503 Жыл бұрын

  what is the name of the stove?? king Tucker or..??

• 
  @Yankeeprepperasshat Жыл бұрын

  Did you completely ignore the burner on purpose? That’s the only part that matters. First pet to fail from clogging.. this video is useless

• 
  @mrmilloforsale Жыл бұрын

  Where I can find to buy the wood stove. Thanks

• 
  @Themetalman8853 ай бұрын

  See other replies for links and info

• 
  @Powerstrokemods Жыл бұрын

  Your fuel pump is upside down.

• 
  @GaryMcKinnonUFO Жыл бұрын

  A bit of brake cleaner in there brings back the shine mate.

• 
  @GaryMcKinnonUFO Жыл бұрын

  The shell is die-cast aluminium, i think. The chamber is steel.

• 
  @arthurfoyt6727 Жыл бұрын

  The heater is basically a diesel engine. Why not just use Sea Foam in the fuel and let it clean itself as it runs?

• 
  @torlandmusiq8 ай бұрын

  shoot that video please!! Would be epic if it worked..good point

• 
  @arthurfoyt67278 ай бұрын

  @@torlandmusiq Nope. I do not run mine enough (in South Texas) to get to that point. Not my video to make, just a suggestion from automotive diesel people.

• 
  @yashsuthar2117 Жыл бұрын

  Just like to know what liquid/fuel have being used to have cause so much carbon, suit in combustion chamber. Thanks.

• 
  @GaryMcKinnonUFO Жыл бұрын

  It was my exhaust, not pointing down enough. Cheers again pal you saved me hours of frustration there i reckon :)

• 
  @GaryMcKinnonUFO Жыл бұрын

  Cheers for this pal, installed one of these in my shed and getting E10, no blockages in fuel line or tank. Your fuel filter is upside down (fuel going into filter from larger end) compared to other videos i've seen, and compared to my own, which was working fine, can they go either way around then ? Liked and subbed ).

• 
  @t3-tofinototuk.333 Жыл бұрын

  I didn't hear an answer for a E2 error code.

• 
  @luapynneb3069 Жыл бұрын

  Such a easy video to watch, thx for sharing the info, as i will need to clean mine at some point.

• 
  @paradime100 Жыл бұрын

  Just to repeat an earlier comment about the atomiser screen around the glow plug that you should have replaced or at least cleaned as part of the process !!

• 
  @mobileupload4374 Жыл бұрын

  Did you buy the flu separate?

• 
  @swichkite Жыл бұрын

  Nice one buddy that really helped when i serviced my heater thanks