I used to live next door to a small company that made specialty screws, aptly called "Specials, Inc." - but they went bankrupt and the building was abandoned, with the ancient equipment still in it. The roof leaked, and the whole place started falling apart - a shame, really.
@fredwexler1362 Жыл бұрын
Nothing digital in this machine unless you count his fingers.
@mrgod5139 Жыл бұрын
If only Jeff bezos didn’t start Amazon sand sell books This is exactly where I imagined he would be
@mrgod5139 Жыл бұрын
Screw you
@mahendrabandaranayake2633 Жыл бұрын
A good example is in the case of machine maintenance. If preventive maintenance, scheduled maintenance and breakdown maintenance of those machines are carried out properly, this machine will work well even for hundred years. This gentleman seems to be dedicated to machine maintenance
@andreykyzn Жыл бұрын
Безопастность как на пакистанском заводе.
@user-sv4so1tf5q Жыл бұрын
They also make buggy whips.
@tonystarch4487 Жыл бұрын
A good old Craftsman's skills and machinery are always so nice to watch.
@Tokentools-weldersAu Жыл бұрын
Its a well oiled machine and slick operation 💰💰💰💰
@buxvan Жыл бұрын
Top up those oilers & grease those nipples.
@zenperspective9687 Жыл бұрын
It looks and sounds like Willy Wonka's inventing room Willy Wonka & the Chocolate Factory.
@joepadilla6815 Жыл бұрын
I'm
@stevemitz4740 Жыл бұрын
How silly to see him wearing a fake/ magic coved stopper mask! Suckers & fools can put their faith in the most silly things!
@joegilly1523 Жыл бұрын
I worked at a book making plant they had some equipment that was over 110 years old and that was 26 years ago. Old German equipment lasts.
@keepcalmandenjoythedecline Жыл бұрын
None of the interesting parts of the process are shown. No threading, no shaping of the head, no blanks... 🤷🏻♂️
@bigbilltoady412 Жыл бұрын
So many of us work hard all our lives to earn an honest wage. And then in the end all we have is our broken backs. Joe Biden on the other hand never worked an honest day in his life. And now is worth millions from the ill gotten gains put into his pocket. A truly detestable stuffed shirt of a "man".
@ramonleon3665 Жыл бұрын
Corre riegos, trabajando solo.😮
@peterforan5982 Жыл бұрын
👍
@Raymond-mk8cb Жыл бұрын
I wonder how his hearing is holding out, with all the clanging metal.
@magasoulshadow Жыл бұрын
SOMEBODY, PLEASE GET THIS MAN A MEDAL!
@francoscanfe9627 Жыл бұрын
Io ho lavorato alla Bulten e con una macchina uguale che faceva 66 bulloni al minuto da 16 mm, 5/8 unc, unf, wittworth
@MockOverdrive Жыл бұрын
HE IS SO NICE TO WEAR MASK 😷 SO THE POOR METAL SCREWS WON'T CATCH COVID-19... 😏
@88997799 Жыл бұрын
Now you know why they fail… 😂
@user-hh2xg1ji5e Жыл бұрын
Вот где все наши станки, списанные на металлолом в девяностые. На которых мы делали метизы.
@alphaexcavation Жыл бұрын
The best part of this guys life is that any day he wants, he can wake up, look in the mirror and tell his boss to go screw himself!
@stephenbatchelder6417 Жыл бұрын
Why is he wearing a mask alone in his workshop?
@Yunica520 Жыл бұрын
Very good video, congratulations!
@process_r Жыл бұрын
Hello from Tokyo. Thanks for your comment. I watch your channel too!
@DMBall Жыл бұрын
If it ain't broke, don't fix it.
@tonystarch4487 Жыл бұрын
If it ain't broke, don't SCREW it !
@mikewallace8087 Жыл бұрын
?? 1,000,000 screws will take about 11 days continuous to produce ?? Or 5.5 days ?
@Bianchi77 Жыл бұрын
Nice info, thanks :)
@LouisEmery Жыл бұрын
3:55 instead of a mask, he is better off with hearing protection.
When I was young I worked in a production machine shop, I SET UP and ran two Automatic Screw machines (oldest made in the 1940's), AND two CNC lathes ... simultaneously! :) The owner used to call me "The Multi-Spindle Man" :) these old machines remind me of the days back then :)
@whoeverunknown8199 Жыл бұрын
a cool uncle
@seydi2903 Жыл бұрын
でもこう言うのって、1キロ作って数円のくらいしか貰えないんでしょ。そこがなんとかならないかなぁ。
@patrickmurawski400 Жыл бұрын
Biden will give it all to China!! Evil godless people!
@jamessands9436 Жыл бұрын
I ran bolt makers at a fastener company that ditched their vintage National and Nedschroef machines for cheap Chinese machines that ran a couple ppm more. The old machines could head, trim, point and roll threads with each stroke of the ram. The new machines were strictly cold headers, so they had to add secondary work to parts. Guess what happened.
@HighGear7445 Жыл бұрын
Used to make tooling for the fastener industry. Those old machines are solid and overbuilt and rebuilt when they need to be .
@mikewallace8087 Жыл бұрын
The old Machines . Righteously built !
@paulkorakas8778 Жыл бұрын
I WISH GOOD HEALTH TO THAT GENTLEMAN. BRAVO BRAVISSIMO REGARDS FROM AN OLD GREEK CRAFTSMAN FROM ATHENS GREECE
Пікірлер
Sir apratear ki jarurat hai
Excellent
Boleh ikut kerja,saya biasa ngoprasikan mesin Heading
Amazing ready mix concrete machines trucks
музыка всё испортила. есть этот ролик без музона, нахера было вставлять. там весь кайф в звуках
It only takes 10 months for my machine to make 144 million nails. He needs 12 months.
昔の機械は本当に凄いのよ。 なかなか壊れないし、職人がいれば修理もできる。 今の機械も悪くないけど、壊れたら基本終わり。 テスラ車なんてほぼ総取っ替え、こういうのは気に入らない。
一緒にチャンネルやりませんか？
素晴らしい映像力です。
Болты или шурупы?
Оборудование уже всё разъеблося....
I used to live next door to a small company that made specialty screws, aptly called "Specials, Inc." - but they went bankrupt and the building was abandoned, with the ancient equipment still in it. The roof leaked, and the whole place started falling apart - a shame, really.
Nothing digital in this machine unless you count his fingers.
If only Jeff bezos didn’t start Amazon sand sell books This is exactly where I imagined he would be
Screw you
A good example is in the case of machine maintenance. If preventive maintenance, scheduled maintenance and breakdown maintenance of those machines are carried out properly, this machine will work well even for hundred years. This gentleman seems to be dedicated to machine maintenance
Безопастность как на пакистанском заводе.
They also make buggy whips.
A good old Craftsman's skills and machinery are always so nice to watch.
Its a well oiled machine and slick operation 💰💰💰💰
Top up those oilers & grease those nipples.
It looks and sounds like Willy Wonka's inventing room Willy Wonka & the Chocolate Factory.
I'm
How silly to see him wearing a fake/ magic coved stopper mask! Suckers & fools can put their faith in the most silly things!
I worked at a book making plant they had some equipment that was over 110 years old and that was 26 years ago. Old German equipment lasts.
None of the interesting parts of the process are shown. No threading, no shaping of the head, no blanks... 🤷🏻♂️
So many of us work hard all our lives to earn an honest wage. And then in the end all we have is our broken backs. Joe Biden on the other hand never worked an honest day in his life. And now is worth millions from the ill gotten gains put into his pocket. A truly detestable stuffed shirt of a "man".
Corre riegos, trabajando solo.😮
👍
I wonder how his hearing is holding out, with all the clanging metal.
SOMEBODY, PLEASE GET THIS MAN A MEDAL!
Io ho lavorato alla Bulten e con una macchina uguale che faceva 66 bulloni al minuto da 16 mm, 5/8 unc, unf, wittworth
HE IS SO NICE TO WEAR MASK 😷 SO THE POOR METAL SCREWS WON'T CATCH COVID-19... 😏
Now you know why they fail… 😂
Вот где все наши станки, списанные на металлолом в девяностые. На которых мы делали метизы.
The best part of this guys life is that any day he wants, he can wake up, look in the mirror and tell his boss to go screw himself!
Why is he wearing a mask alone in his workshop?
Very good video, congratulations!
Hello from Tokyo. Thanks for your comment. I watch your channel too!
If it ain't broke, don't fix it.
If it ain't broke, don't SCREW it !
?? 1,000,000 screws will take about 11 days continuous to produce ?? Or 5.5 days ?
Nice info, thanks :)
3:55 instead of a mask, he is better off with hearing protection.
大手製造メーカーはこのような損得抜きで作ってくれている企業があることを知らない。 このような工場があってこそということを知るべきだろう。 ただただ協力業者をたたけば儲けを出せる大手とは違う。 1個何銭で稼いでる企業があるからこそ成り立ってることを知るべきだ。
日本人の職人魂ですね。ほんとに自分に厳しいし、製品愛に満ちている。企業は部品の海外発注で損得ばかり考えてると、技術者は育たず品質劣化で、メイドインジャパンは地に堕ちるでしょうね。
When I was young I worked in a production machine shop, I SET UP and ran two Automatic Screw machines (oldest made in the 1940's), AND two CNC lathes ... simultaneously! :) The owner used to call me "The Multi-Spindle Man" :) these old machines remind me of the days back then :)
a cool uncle
でもこう言うのって、1キロ作って数円のくらいしか貰えないんでしょ。そこがなんとかならないかなぁ。
Biden will give it all to China!! Evil godless people!
I ran bolt makers at a fastener company that ditched their vintage National and Nedschroef machines for cheap Chinese machines that ran a couple ppm more. The old machines could head, trim, point and roll threads with each stroke of the ram. The new machines were strictly cold headers, so they had to add secondary work to parts. Guess what happened.
Used to make tooling for the fastener industry. Those old machines are solid and overbuilt and rebuilt when they need to be .
The old Machines . Righteously built !
I WISH GOOD HEALTH TO THAT GENTLEMAN. BRAVO BRAVISSIMO REGARDS FROM AN OLD GREEK CRAFTSMAN FROM ATHENS GREECE