Just seeing that long un-level ankle pad - is major cringe for me, knowing that my left quad will be doing more work than my right quad. I've been to many different gyms/health clubs and believe it or not - even some Leg Extension machines that are $3,500 dollars have the same problem. For this machine: I think that "IF" that Main Up Square Tube was solid and the two Down Square Tubes were solid - that there would be LESS wobble and or "play" . I think that the Titan Fitness Leg Extension is slightly better with slightly less wobble in that ankle pad, but there's really no way to know unless you buy it and try it out.
@lots37997 күн бұрын
Great review!
@JourneyOfStrength8 күн бұрын
I'd like to get one, but I don't see $800 worth.
9 күн бұрын
The main point is that it is really good idea but: - handle the dumbbells is uncomfortable (too thick and sometimes too narrow) - those hooks are made not of steel but of something that is unbendable. If you traying to bend it it is breaking! And if you throw it with the dumbbell on the ground it may brake just because of the material that it is made of.
@bellabeagle711 күн бұрын
Anybody compared this to Titan's?
@DANT-E11 күн бұрын
And rust
@riccarrasquilla37912 күн бұрын
thanks for the video
@jasonbray582314 күн бұрын
Thank you! I’ve been thinking about these for years. Great review.
@ramansharma391620 күн бұрын
How can i amke themnwork woth the powerblock exp model (The red and black one they dont have much space at the bottom as there are 3 attachments instead of two
@Jake-lr3ff21 күн бұрын
I wasn’t sure it would work. Thank you for this video
@hoxyho22 күн бұрын
Is the “blackout” purely aesthetic? Or is there some other benefit, more rust resistance perhaps?
@keiithhayes675123 күн бұрын
Where can I purchase?
@tampajep26 күн бұрын
Thanks!
@demonsouls950929 күн бұрын
Thank you
@KingMartin9029 күн бұрын
I was looking at powerblock dumbbells and needed to know if these hooks fit and your video helped me loads in deciding to purchase powerblock 👍
@swrr732Ай бұрын
Probably saved me half an hour ... Thank you
@BarryJHoffmanАй бұрын
Hi.. Do you know why the pins have a cord atrached? Is it so they don't get lost? Jyst bought home gym with it and want to remove attached cord to pin. Is that fine to do? Tx
@stevelufc64Ай бұрын
Got the same design I conect it to my cable machine so it has weight from tart to finish of the movement
@edgarcabrera6132Ай бұрын
Great video! I've got a 3 x 3 rack with no holes on the side of the tubing (only back and front) and have been wanting to purchase this along with the Titan X3 Arms. You touched on the side pin there towards the end of your video, would you say that side pin is necessary to secure the arms or would I be able to get away without using it? Thanks
@mariolp2999Ай бұрын
It's a good piece of equipment but IMO it should be cheaper...maybe in the 400's
@michaelderenne98382 ай бұрын
Dumb question but what kind of hernia
@rzrpwr2 ай бұрын
4 years later it’s $48… 🥴
@thebeardedgorilla85962 ай бұрын
Does the hamstring function seem effective? Looks a lil awkward from here but i have this in my cart in Amazon right now.
@aptn222 ай бұрын
Wow, these are awesome. Nice find!
@onesrilankan12 ай бұрын
Open or laparoscopic?
@ivy19742 ай бұрын
$250??? That’s not what the website says.
@tafarihowe32772 ай бұрын
Use your bench to hold it in place lol. That’s how you gotta Titan products rest it on the bench in the incline position lol.
@doctabustacruz2 ай бұрын
Still very helpful! Now that i got the vendetta brackets for my Titan T3 2x3 rack and lever arms!
@kirkrove6553 ай бұрын
The 5% discount code doesn’t seem to work anymore. Is there a new code?
@cooljayz14623 ай бұрын
Thanks mate real helpful life saver😊
@Ride-Fly3 ай бұрын
Thanks Squirt im gonna give these a try!
@karlinbarnes32663 ай бұрын
Or you can wrap the pipe in electrical tape or something.
@mrmetal773 ай бұрын
Has ANYONE else had issues with the metal washers behind the cable balls scraping on the metal pulley wings and getting stuck while pulling DOWN from a higher height?
@jasona93513 ай бұрын
I know this a older video but thanks make routing the cables super easy 🙏🍕🍺
@Omnivolv3 ай бұрын
I don’t think your mic is working man. Should sound better then that. Just a heads up! Good video I just got one it’s giant for my apartment but fuck it haha
@BreadAndGatorade3 ай бұрын
I use my drum fan the same way lol
@samrmills3 ай бұрын
Nice! Have you tried this one sitting somehow? Either on their pad or with a bench
@RetroCody3 ай бұрын
How did you achieve this?
@eheheh32633 ай бұрын
Which attachment would you recommend instead of this one???
@RhonnelKForde3 ай бұрын
I have had a pair of the pros for the past 4 yrs now. A+ on durability as well as functionality. I do agree 100% with your pros and con. Great review. 🙌🏾
@Nourishtoflourishcookbook3 ай бұрын
They are horrible and dangerous. Stay away.
@user-sd8bz2zr5j3 ай бұрын
Hey friend. Curious if you have a video or link to any info on how you did the wood wall. I'm pretty useless with DYI handyman things but must learn and accomplish this for my walls! Appreciate it if you see this!
@ianryan57273 ай бұрын
Very helpull review mate. I have developed severe hip arthritis and as such have terrible pain in my hips when picking up and putting down dumbbellsfrom the floor while seated on a bench. I was looking to these as a solution, from your review it seems to be a fine solution. On the plus side I never concidered them for shoulder pressing and pullovers, and the pull up trick looks fantastic, a little more movemet that a fixed bar but adding to the stabalising muscles getting a workout. Many thanks mate. Cheers.
@mariolp29994 ай бұрын
Nice review,, but you need to review some leg presses and hack squats machines out in the market... ..JMO...
@sierraautobodymustang95594 ай бұрын
Thanks. This is exactly what i was looking for! I had alot of questions regarding bolting and unbolting and getting pins instead
@spartakos31784 ай бұрын
This is perfect for a tri post rack design from the makers of the isolator.
Пікірлер
Nice breakdown, thanks.
Great review. I bought them! Thanks
I was doing this wrong for a year 😭
Just seeing that long un-level ankle pad - is major cringe for me, knowing that my left quad will be doing more work than my right quad. I've been to many different gyms/health clubs and believe it or not - even some Leg Extension machines that are $3,500 dollars have the same problem. For this machine: I think that "IF" that Main Up Square Tube was solid and the two Down Square Tubes were solid - that there would be LESS wobble and or "play" . I think that the Titan Fitness Leg Extension is slightly better with slightly less wobble in that ankle pad, but there's really no way to know unless you buy it and try it out.
Great review!
I'd like to get one, but I don't see $800 worth.
The main point is that it is really good idea but: - handle the dumbbells is uncomfortable (too thick and sometimes too narrow) - those hooks are made not of steel but of something that is unbendable. If you traying to bend it it is breaking! And if you throw it with the dumbbell on the ground it may brake just because of the material that it is made of.
Anybody compared this to Titan's?
And rust
thanks for the video
Thank you! I’ve been thinking about these for years. Great review.
How can i amke themnwork woth the powerblock exp model (The red and black one they dont have much space at the bottom as there are 3 attachments instead of two
I wasn’t sure it would work. Thank you for this video
Is the “blackout” purely aesthetic? Or is there some other benefit, more rust resistance perhaps?
Where can I purchase?
Thanks!
Thank you
I was looking at powerblock dumbbells and needed to know if these hooks fit and your video helped me loads in deciding to purchase powerblock 👍
Probably saved me half an hour ... Thank you
Hi.. Do you know why the pins have a cord atrached? Is it so they don't get lost? Jyst bought home gym with it and want to remove attached cord to pin. Is that fine to do? Tx
Got the same design I conect it to my cable machine so it has weight from tart to finish of the movement
Great video! I've got a 3 x 3 rack with no holes on the side of the tubing (only back and front) and have been wanting to purchase this along with the Titan X3 Arms. You touched on the side pin there towards the end of your video, would you say that side pin is necessary to secure the arms or would I be able to get away without using it? Thanks
It's a good piece of equipment but IMO it should be cheaper...maybe in the 400's
Dumb question but what kind of hernia
4 years later it’s $48… 🥴
Does the hamstring function seem effective? Looks a lil awkward from here but i have this in my cart in Amazon right now.
Wow, these are awesome. Nice find!
Open or laparoscopic?
$250??? That’s not what the website says.
Use your bench to hold it in place lol. That’s how you gotta Titan products rest it on the bench in the incline position lol.
Still very helpful! Now that i got the vendetta brackets for my Titan T3 2x3 rack and lever arms!
The 5% discount code doesn’t seem to work anymore. Is there a new code?
Thanks mate real helpful life saver😊
Thanks Squirt im gonna give these a try!
Or you can wrap the pipe in electrical tape or something.
Has ANYONE else had issues with the metal washers behind the cable balls scraping on the metal pulley wings and getting stuck while pulling DOWN from a higher height?
I know this a older video but thanks make routing the cables super easy 🙏🍕🍺
I don’t think your mic is working man. Should sound better then that. Just a heads up! Good video I just got one it’s giant for my apartment but fuck it haha
I use my drum fan the same way lol
Nice! Have you tried this one sitting somehow? Either on their pad or with a bench
How did you achieve this?
Which attachment would you recommend instead of this one???
I have had a pair of the pros for the past 4 yrs now. A+ on durability as well as functionality. I do agree 100% with your pros and con. Great review. 🙌🏾
They are horrible and dangerous. Stay away.
Hey friend. Curious if you have a video or link to any info on how you did the wood wall. I'm pretty useless with DYI handyman things but must learn and accomplish this for my walls! Appreciate it if you see this!
Very helpull review mate. I have developed severe hip arthritis and as such have terrible pain in my hips when picking up and putting down dumbbellsfrom the floor while seated on a bench. I was looking to these as a solution, from your review it seems to be a fine solution. On the plus side I never concidered them for shoulder pressing and pullovers, and the pull up trick looks fantastic, a little more movemet that a fixed bar but adding to the stabalising muscles getting a workout. Many thanks mate. Cheers.
Nice review,, but you need to review some leg presses and hack squats machines out in the market... ..JMO...
Thanks. This is exactly what i was looking for! I had alot of questions regarding bolting and unbolting and getting pins instead
This is perfect for a tri post rack design from the makers of the isolator.
spreader bar?