Hello, hello, Geek DK here. The name's Dean. This channel is about a geek's interests which are a fair amount of things - Computer cases, CPU coolers, occasional manga stuff, painting, et cetera.
Hey man, is IS-40-XT 47mm tall same as 47XT or its 45MM tall same as 40X ? Can you please check ?
@geekdkКүн бұрын
40-XT is 47mm. This is due to the mounting mechanism for AM5.
@syarifairlangga4608Күн бұрын
I buy 55-XT because im using Asrock Deskmeet B660.
@tip0019Күн бұрын
I felt the silence thru the screen at start up. I have a silent pc too, with fans however (nuc11 enthoustiast) but can't kill any burglar with mine 😉 Nice machine, low temps, no throttling, not for gaming, top 👌
@megadeth85922 күн бұрын
man i had this case as my first pc....had a full size atx psu and hard drive......cable management was nonexistent
@geekdk2 күн бұрын
This case is better now due to wide spread usage of M.2 and SFX PSU. No more SATA and power cables and the smaller PSU leaves more space. In other words, this case aged well.
@amirfaiz19503 күн бұрын
is it possible to mount another fan at the front panel if using 120 mm aio?
@geekdk3 күн бұрын
Nope.
@xerejuneseve63333 күн бұрын
6W is only for cpu.I think it needs wentilation holes to.
@tip0019Күн бұрын
It doesn't need any holes, the outside surface area is enough. They also under-volted the cpu. It never throttles. It has some specific use cases.
@uhk94284 күн бұрын
When mounting fans to the bottom, is there enough space for a 3.5 slots gpu?
@geekdk4 күн бұрын
Maybe slims ones. If you are mounting such a monster, though, you shouldn't install fans down there. Let the GPU draw in air by itself since it'd be touching the bottom almost anyway.
@uhk94284 күн бұрын
@@geekdk aah so I should stop at 3 slots max if I want fans, got it... Maybe I'll just deshroud the GPU and call it a day
@mtaufiqn50404 күн бұрын
I have build my pc in this case before, but currently i have move my build to hyte revolt now
@mrchezsandvich.40964 күн бұрын
how "marginally worse" is the IS-47xt compared to the is-55?
@minhthupham18315 күн бұрын
Thanks you, I absolutely like this your content. Keep on.
@geekdk5 күн бұрын
Thank you.
@syarifairlangga46088 күн бұрын
Which one beter for Intel i7-12700. IS40XT or ordinary IS40X V3 ?
@geekdk8 күн бұрын
They are the same cooler.
@syarifairlangga46088 күн бұрын
@@geekdk i read the TDP of XT only 95 while XV3 is 100w sir. Thats why i confuse
@geekdk8 күн бұрын
@@syarifairlangga4608 In this video ( kzread.info/dash/bejne/YmVmlchsmJTdhtI.html ) , I compare 40X and 40XT briefly. They look the same. They cut a bit of fins in XT to make a room for AM5 mounting.
@syarifairlangga46088 күн бұрын
@@geekdk owh i see, so thats why the old version is better i think for intel
@AZERBAYDZHANPOSHYOLNAKHUY3749 күн бұрын
Get a hard drive, homebrew your console, and download a lot of free Wii U games so you can play with unlimited time…
@user-yt8pw9ok3h10 күн бұрын
Hello. Move the water-cooled turntable forward. the processor will be cooler.
@akbarpandu9410 күн бұрын
It looks like is-40-xt just like is-40x, but the fan is mounted with a screw
@geekdk10 күн бұрын
They had to do that in order to make it AM5 compatible.
@akbarpandu949 күн бұрын
@@geekdk i want to buy 40-xt for my 12400f is it enough? Is there any performance difference compared to the Intel stock cooler? tbh dont really like 92mm fan, rn im still thinking to buy 40-xt or is-50x v3
@geekdk9 күн бұрын
12400 is already pretty chill CPU with TDP of about 80w at full load. I don't believe 40-XT will give you an edge. It will be quieter, however. 50X would be certainly better.
@Alex-177611 күн бұрын
WiiU had decent specs for it's time, and had some good games. The problem is it was just a cumbersome concept. The Switch isn't even that much more powerful than WiiU, but it refined the concept and might end up being the best selling console of all time when said and done
@possibly_ben11 күн бұрын
funnily enough, i've been considering buying a wii or wii u for ease of access in terms of playing games with guests over, i've ended up settling for a wii thanks to not having to buy a gamecube controller adapter (although both can run gcn natively, albeit with custom firmware in the wii u's case which i'm gonna be doing anyway) and being generally cheaper, though i did have to buy a wii2hdmi adapter for it which closed the price gap a little, anyway, shouldn't take too long for it to arrive in the mail
@NahuelVM11 күн бұрын
All the girls always gorgeous. Megami Magazine is amazing. I wish have one. Thanks to show the magazine.
@RefuseCF11 күн бұрын
Would like to see the difference in temps between 40xt and 47xt at 75w, 90w, 105w. As I'm planning on buying one and would like to see which of the is better in terms of performance
@geekdk11 күн бұрын
47-XT looks slightly bigger and better built. Whether that small difference will translate to having a better performance is unknown. I will probably do a 40XT vs. 47XT video in a few days.
@RefuseCF11 күн бұрын
Also, would be cool to add the regular is-40x to these tests
@mikewilson85811 күн бұрын
Oh that is great. I’m going to look that company up!
@franzpleurmann258512 күн бұрын
Can the back panel be mounted in place of the glass panel?
@geekdk12 күн бұрын
Nope.
@nelsonlau12314 күн бұрын
Rather than motherboard, the other components of mini-ITX and MATX are the same for the same prices. In addition, Nvidia also announced a new program for Small Form Factor PC builders that definitely helped the chassis manufacturers for SFF builds. NVIDIA Working With Partners To Create New SFF Gaming PC Ecosystem Powered By “SFF Enthusiast GeForce” GPUs These guidelines provide dimensions and clearances between enthusiast graphics cards and SFF chassis, creating a standard for AIC and chassis manufacturers to help make building SFF Gaming PCs a great experience.
@geekdk14 күн бұрын
If the price gap between ITX and mITX was not as staggering, I wouldn't have created this video. The price gap is so huge that I felt I needed to create this. It's almost 200 bucks difference where I live.
@Kruemeleistee14 күн бұрын
mATX is the way to go if you don't have the budget for the really small builds in something like a fractal terra. The Jonsplus Z20 is a great case btw. Love it
@kazumasato631515 күн бұрын
Thank U !
@barrygriffies45915 күн бұрын
Wow I was looking for info on the cooler and saw you are using the ryzen 9 7900 which is what I’m going to get. How much more perfect can this video get?
@benuten390716 күн бұрын
Why the frick you keep calling/referring AIO's as "watercooling", kinda misleading
@FavoniusNavy16 күн бұрын
but AIO is INDEED a watercooling, a closed-loop one.
@benuten390716 күн бұрын
@@FavoniusNavy AIO is just easy to drop and say..rather than Water cooling, then me who has done real custom "water cooling" builds all the time looks and freakin sees a tiny AIO gets cofused..
@FavoniusNavy16 күн бұрын
@@benuten3907 it's still cooled by water
@RobertBrownCyberboy1094 күн бұрын
@@benuten3907it’s still water cooling
@kenk526916 күн бұрын
Very very much playable definitely. Im used to 5-15fps on ksp so this is a welcome change. Mine is arriving this week.
@GebaseerdeKikker19 күн бұрын
But would the Scythe Big Shuriken 3 Rev. B perform better? Very interesting video none the less. Thanks for doing this!
@waynegill173324 күн бұрын
nice quick build there is so much that this case can do for its size as for the power cord doesn't every pc known to man have a cord hanging out the back it just should have been longer and it would have been more in line with what were used too.
@YungAnt20924 күн бұрын
were you able to fit the sgx-750 in the normal sfx way? With fan facing towards rear of case?
@geekdk24 күн бұрын
No, that would twist the power cord too much. It's facing the front which is a valid choice since it'd take air from front and push it out upwards.
@Sulprax27 күн бұрын
Love the fjord and jester stickers from critical role
@geekdk27 күн бұрын
Thanks. A big fan of CR.
@Sulprax27 күн бұрын
@@geekdk what equipment do you have in this case I just brought it ready to build my proxmox server.
@geekdk27 күн бұрын
@@Sulprax I've found that this chassis is horrid with airflow, so anything above 65w TDP was simply overheating when pushed. The last setup I used was Ryzen 4600G. Currently, it's sitting in my storage.
@depressed57928 күн бұрын
hey man nice video ! can i ask if that case can fit a 4070 supper dual ? im on my way to get one of those
@geekdk28 күн бұрын
Nope.
@avirtualworld4UАй бұрын
Well done! Best presentation i've seen in a long time thank you.
@TrunkMonkey42Ай бұрын
what is the name of the connectors used for the j41 mxm sockets?
@kamilux-GamingАй бұрын
Good build bro, black case is very nice 👍. I build same case in white.
@chevyvoltinfo2151Ай бұрын
Can this cool a i9 cpu
@geekdkАй бұрын
Nope.
@cemobili1Ай бұрын
Thank you for your review
@metallicmoonАй бұрын
nice video - thanks for sharing!
@ridhoalfianom4192Ай бұрын
great vids! very simple and relaxing. Have you tried installing 92mm slim fan on the side of PSU with some wires? either as intake or as exhaust, which is better for your build?
@geekdkАй бұрын
The temp is more than acceptable. I don't feel the need to do it.
@user-ux9zb2pq8yАй бұрын
hi just quick q.. where can I add rx560? i dont see thr slot...
@geekdkАй бұрын
You can't.
@user-ux9zb2pq8yАй бұрын
@@geekdk thank you!
@franzpleurmann2585Ай бұрын
Is there a version without glass panel available?
@geekdkАй бұрын
I don't think so, no.
@franzpleurmann2585Ай бұрын
@@geekdk What a bummer :(
@ethaneaves_04Ай бұрын
Would you say it’s portable enough for travel every so often ?
@geekdkАй бұрын
No. I feel it's on a heavy side, and the handle ... I don't really trust it. Jonsbo C6 is far better in that regard.
@potato_trianon698421 күн бұрын
Not so often. I had a 240mm AIO, 3 fans, mb, and PSU assembled in it when I weighed it in the airport. It weighed 11kg. It's not a light weight for an SFF or EDC gadget.
@Grucha1998Ай бұрын
What cpu is it support? I interested in 4600g or 5600g
@geekdkАй бұрын
Only select 3xxx series.
@narutanx9224Ай бұрын
I am new to the hobby and haven’t made a kit yet but I’ve been trying to do research. Can I ask why you didn’t prime the pieces before painting them? I see lots of videos saying to do that
@geekdkАй бұрын
This is "charagumin" kit. It essentially means parts come colored or "primed". This kit is a beginner friendly kit.
@ethaneaves_04Ай бұрын
I’m trying to decide between this case and the deepcool ch160, this might be the one tho only being 4 liters more and having so much more capability than the deep cool case, plus better cooling especially since I’m gonna be using a i5 13600k so I can water cool
@geekdkАй бұрын
Plus, you can use mATX here. ITX motherboards are absurdly expensive nowadays.
@ilyasy3876Ай бұрын
Ordered the same case today. I’d prefer c6, but, unfortunately, I don’t have low profile CPU fan
@geekdkАй бұрын
Jonsbo is to release C6-ITX later this year. It's the same chassis but with an ITX and a SFX PSU on front.
@EdwardNigma950Ай бұрын
Pls upload the build. Cable managment is very interesting. Cause i am thinking bout that exact case
@geekdkАй бұрын
It's scheduled for next week, but I will say that it is a very good case. It's probably the smallest matx case without compromises.
@EdwardNigma950Ай бұрын
@@geekdk yeah, that's why I am thinking about it
@markdavies981Ай бұрын
Great video! Very interesting to see what equipment you use to create your videos.
@abhijitdashАй бұрын
Very good comparison and well put video as well. Thank you
@vavamanАй бұрын
Thanks
@user-dj2yl6bq4mАй бұрын
what you can say about noise comfort? Is it a very loud ?
@geekdkАй бұрын
It's loud at 100%. You probably won't hear it unless CPU is being pushed to full.
Пікірлер
Hey man, is IS-40-XT 47mm tall same as 47XT or its 45MM tall same as 40X ? Can you please check ?
40-XT is 47mm. This is due to the mounting mechanism for AM5.
I buy 55-XT because im using Asrock Deskmeet B660.
I felt the silence thru the screen at start up. I have a silent pc too, with fans however (nuc11 enthoustiast) but can't kill any burglar with mine 😉 Nice machine, low temps, no throttling, not for gaming, top 👌
man i had this case as my first pc....had a full size atx psu and hard drive......cable management was nonexistent
This case is better now due to wide spread usage of M.2 and SFX PSU. No more SATA and power cables and the smaller PSU leaves more space. In other words, this case aged well.
is it possible to mount another fan at the front panel if using 120 mm aio?
Nope.
6W is only for cpu.I think it needs wentilation holes to.
It doesn't need any holes, the outside surface area is enough. They also under-volted the cpu. It never throttles. It has some specific use cases.
When mounting fans to the bottom, is there enough space for a 3.5 slots gpu?
Maybe slims ones. If you are mounting such a monster, though, you shouldn't install fans down there. Let the GPU draw in air by itself since it'd be touching the bottom almost anyway.
@@geekdk aah so I should stop at 3 slots max if I want fans, got it... Maybe I'll just deshroud the GPU and call it a day
I have build my pc in this case before, but currently i have move my build to hyte revolt now
how "marginally worse" is the IS-47xt compared to the is-55?
Thanks you, I absolutely like this your content. Keep on.
Thank you.
Which one beter for Intel i7-12700. IS40XT or ordinary IS40X V3 ?
They are the same cooler.
@@geekdk i read the TDP of XT only 95 while XV3 is 100w sir. Thats why i confuse
@@syarifairlangga4608 In this video ( kzread.info/dash/bejne/YmVmlchsmJTdhtI.html ) , I compare 40X and 40XT briefly. They look the same. They cut a bit of fins in XT to make a room for AM5 mounting.
@@geekdk owh i see, so thats why the old version is better i think for intel
Get a hard drive, homebrew your console, and download a lot of free Wii U games so you can play with unlimited time…
Hello. Move the water-cooled turntable forward. the processor will be cooler.
It looks like is-40-xt just like is-40x, but the fan is mounted with a screw
They had to do that in order to make it AM5 compatible.
@@geekdk i want to buy 40-xt for my 12400f is it enough? Is there any performance difference compared to the Intel stock cooler? tbh dont really like 92mm fan, rn im still thinking to buy 40-xt or is-50x v3
12400 is already pretty chill CPU with TDP of about 80w at full load. I don't believe 40-XT will give you an edge. It will be quieter, however. 50X would be certainly better.
WiiU had decent specs for it's time, and had some good games. The problem is it was just a cumbersome concept. The Switch isn't even that much more powerful than WiiU, but it refined the concept and might end up being the best selling console of all time when said and done
funnily enough, i've been considering buying a wii or wii u for ease of access in terms of playing games with guests over, i've ended up settling for a wii thanks to not having to buy a gamecube controller adapter (although both can run gcn natively, albeit with custom firmware in the wii u's case which i'm gonna be doing anyway) and being generally cheaper, though i did have to buy a wii2hdmi adapter for it which closed the price gap a little, anyway, shouldn't take too long for it to arrive in the mail
All the girls always gorgeous. Megami Magazine is amazing. I wish have one. Thanks to show the magazine.
Would like to see the difference in temps between 40xt and 47xt at 75w, 90w, 105w. As I'm planning on buying one and would like to see which of the is better in terms of performance
47-XT looks slightly bigger and better built. Whether that small difference will translate to having a better performance is unknown. I will probably do a 40XT vs. 47XT video in a few days.
Also, would be cool to add the regular is-40x to these tests
Oh that is great. I’m going to look that company up!
Can the back panel be mounted in place of the glass panel?
Nope.
Rather than motherboard, the other components of mini-ITX and MATX are the same for the same prices. In addition, Nvidia also announced a new program for Small Form Factor PC builders that definitely helped the chassis manufacturers for SFF builds. NVIDIA Working With Partners To Create New SFF Gaming PC Ecosystem Powered By “SFF Enthusiast GeForce” GPUs These guidelines provide dimensions and clearances between enthusiast graphics cards and SFF chassis, creating a standard for AIC and chassis manufacturers to help make building SFF Gaming PCs a great experience.
If the price gap between ITX and mITX was not as staggering, I wouldn't have created this video. The price gap is so huge that I felt I needed to create this. It's almost 200 bucks difference where I live.
mATX is the way to go if you don't have the budget for the really small builds in something like a fractal terra. The Jonsplus Z20 is a great case btw. Love it
Thank U !
Wow I was looking for info on the cooler and saw you are using the ryzen 9 7900 which is what I’m going to get. How much more perfect can this video get?
Why the frick you keep calling/referring AIO's as "watercooling", kinda misleading
but AIO is INDEED a watercooling, a closed-loop one.
@@FavoniusNavy AIO is just easy to drop and say..rather than Water cooling, then me who has done real custom "water cooling" builds all the time looks and freakin sees a tiny AIO gets cofused..
@@benuten3907 it's still cooled by water
@@benuten3907it’s still water cooling
Very very much playable definitely. Im used to 5-15fps on ksp so this is a welcome change. Mine is arriving this week.
But would the Scythe Big Shuriken 3 Rev. B perform better? Very interesting video none the less. Thanks for doing this!
nice quick build there is so much that this case can do for its size as for the power cord doesn't every pc known to man have a cord hanging out the back it just should have been longer and it would have been more in line with what were used too.
were you able to fit the sgx-750 in the normal sfx way? With fan facing towards rear of case?
No, that would twist the power cord too much. It's facing the front which is a valid choice since it'd take air from front and push it out upwards.
Love the fjord and jester stickers from critical role
Thanks. A big fan of CR.
@@geekdk what equipment do you have in this case I just brought it ready to build my proxmox server.
@@Sulprax I've found that this chassis is horrid with airflow, so anything above 65w TDP was simply overheating when pushed. The last setup I used was Ryzen 4600G. Currently, it's sitting in my storage.
hey man nice video ! can i ask if that case can fit a 4070 supper dual ? im on my way to get one of those
Nope.
Well done! Best presentation i've seen in a long time thank you.
what is the name of the connectors used for the j41 mxm sockets?
Good build bro, black case is very nice 👍. I build same case in white.
Can this cool a i9 cpu
Nope.
Thank you for your review
nice video - thanks for sharing!
great vids! very simple and relaxing. Have you tried installing 92mm slim fan on the side of PSU with some wires? either as intake or as exhaust, which is better for your build?
The temp is more than acceptable. I don't feel the need to do it.
hi just quick q.. where can I add rx560? i dont see thr slot...
You can't.
@@geekdk thank you!
Is there a version without glass panel available?
I don't think so, no.
@@geekdk What a bummer :(
Would you say it’s portable enough for travel every so often ?
No. I feel it's on a heavy side, and the handle ... I don't really trust it. Jonsbo C6 is far better in that regard.
Not so often. I had a 240mm AIO, 3 fans, mb, and PSU assembled in it when I weighed it in the airport. It weighed 11kg. It's not a light weight for an SFF or EDC gadget.
What cpu is it support? I interested in 4600g or 5600g
Only select 3xxx series.
I am new to the hobby and haven’t made a kit yet but I’ve been trying to do research. Can I ask why you didn’t prime the pieces before painting them? I see lots of videos saying to do that
This is "charagumin" kit. It essentially means parts come colored or "primed". This kit is a beginner friendly kit.
I’m trying to decide between this case and the deepcool ch160, this might be the one tho only being 4 liters more and having so much more capability than the deep cool case, plus better cooling especially since I’m gonna be using a i5 13600k so I can water cool
Plus, you can use mATX here. ITX motherboards are absurdly expensive nowadays.
Ordered the same case today. I’d prefer c6, but, unfortunately, I don’t have low profile CPU fan
Jonsbo is to release C6-ITX later this year. It's the same chassis but with an ITX and a SFX PSU on front.
Pls upload the build. Cable managment is very interesting. Cause i am thinking bout that exact case
It's scheduled for next week, but I will say that it is a very good case. It's probably the smallest matx case without compromises.
@@geekdk yeah, that's why I am thinking about it
Great video! Very interesting to see what equipment you use to create your videos.
Very good comparison and well put video as well. Thank you
Thanks
what you can say about noise comfort? Is it a very loud ?
It's loud at 100%. You probably won't hear it unless CPU is being pushed to full.