Пікірлер

• 
  @eddyeddy54409 күн бұрын

  Do you have the link to the seller. I can not find him on ebay

• 
  @screwpull115 күн бұрын

  Spooked me out watching that. All your threads look left handed😅

• 
  @jfkenpoman115 күн бұрын

  @@screwpull1 thank you for your reply , yes sorry I’m still learning and didn’t flip the video footage. Note to self “must try harder” lol Jon

• 
  @karlprice812216 күн бұрын

  Took far too long to get the vid out. Far too long. Really long. Iv been waiting ages. Really ages.

• 
  @cruzzer5217 күн бұрын

  Love the additional moderator Seems extremely quiet. Nice for the neighbors

• 
  @jfkenpoman117 күн бұрын

  @@cruzzer52 thanks for your comment mate yes it was very quiet but I wanted the rifle to be as short as possible. I have it as a backup 👍

• 
  @eddyeddy544019 күн бұрын

  Where did you order the metal guard?

• 
  @jfkenpoman119 күн бұрын

  Thank you for your reply. I ordered mine from Vector Air and it was with me within a few days. Top service Jon 😊

• 
  @trau934622 күн бұрын

  Do you have a video on how to install the armor of this visen gun?

• 
  @trau934622 күн бұрын

  Do you have a video on how to install the armor of this visen gun?

• 
  @jfkenpoman122 күн бұрын

  @@trau9346 thanks for your comment , the video showed me attaching the metal rail. It’s only 2 screws into the block and that’s it basically 👍

• 
  @philsouster722127 күн бұрын

  Could be a good channel, but you need to sort out your editing and especially your sound

• 
  @jfkenpoman127 күн бұрын

  @@philsouster7221 morning, and thank you for your comment. I’m looking at ways to improve, I have just bought the DJI mic2 so will start using these. Any ideas, tips, tricks you have would be great to share and use. Still learning learning all the time. Regards Jon

• 
  @RatsinthereticlesАй бұрын

  The vixens love the Hades mate I’ve not had an issue with POI! The k Itd the way shoot that’s prevents it.

• 
  @jfkenpoman1Ай бұрын

  Yep I agree but for a gun costing this much you’d think they’d put a decent rail on, guess it’s a question of cost. But I did change mine and it feels sturdy. I’ve been recording some more footage with the new zulus 3-12 and I’m getting one hole groups at 27 yards time after time. I’m well pleased with it. Am toying on saving up and getting another vixen short in .177 calibre so that I have a matching pair. And I did manage to dispatch a squirrel yesterday at 27 yds a result 😊

• 
  @AirgunfunrichАй бұрын

  Plus one sub 👍

• 
  @jfkenpoman1Ай бұрын

  Many thanks for subscribing it means a lot👍

• 
  @jfkenpoman1Ай бұрын

  I’ve also subscribed to your channel just now 👍

• 
  @AirgunfunrichАй бұрын

  @@jfkenpoman1 not much on mine mate…. Maybe soon!

• 
  @jfkenpoman1Ай бұрын

  Just upload when you can that’s what I do mate 👍

• 
  @AirgunfunrichАй бұрын

  @@jfkenpoman1 need to learn how to edit…

• 
  @jfkenpoman1Ай бұрын

  Many thanks for your comment, yes I have also been thinking about using slugs so watch this space. I’ll get some ordered when I get paid👍

• 
  @brynybach7741Ай бұрын

  I noticed someone else giving a review of this same rifle that it seemed very accurate when using ZAN 10grain slugs. As I'm looking for a slug gun, it would be nice to see your take with them. 🤔😀👍

• 
  @jfkenpoman1Ай бұрын

  Thank you for your reply it’s much appreciated. I was a little surprised when the JSB diabolo was a larger group I think I will try again 👍

• 
  @JohnVK5JAKАй бұрын

  You need to flip the video. It’s back to front. The orientation of everything is backwards

• 
  @jfkenpoman1Ай бұрын

  Thanks for your valid comment John, I’ll have a look when I get the time, I’m back in work again for it seems like forever, regards Jon 👍

• 
  @PhunkitupАй бұрын

  Great shooting. I noticed .22 Vixen long FAC likes the JSB Hades as well over the JSB heavy. Keep it up and stay safe.

• 
  @TangDynasty1983Ай бұрын

  Is it possible if you can include the throw lever purchase link? Thank you.

• 
  @jfkenpoman1Ай бұрын

  Thank you for your reply unfortunately I cannot get a link but they are on eBay and their details are: redshotuk

• 
  @jfkenpoman1Ай бұрын

  Thanks for the reply mate, I was surprised as mine does like the JSB Diablos I may well clean the barrel and try again. 👍

• 
  @crazycressy7986Ай бұрын

  Mines like that with Airarms field deablos ,nice grouping bud

• 
  @RomanSt13Ай бұрын

  Лысый лайк поставил только лид за прицел ! Пендос почему ты у меня в реках? 😅

• 
  @Kieron-ny8ixАй бұрын

  Why the 3-12. Is it for closer shooting

• 
  @jfkenpoman1Ай бұрын

  Thanks for your reply, short answer is yes as it is a lower base magnification, the field of view is wider and the rangefinder will range closer. Myself I found that on the 5-20 unit the rats appeared way closer as I looked through the scope. 👍

• 
  @markrhodes5474Ай бұрын

  Looks a quality case

• 
  @jfkenpoman1Ай бұрын

  Thanks mate it is a good sturdy case

• 
  @crazycressy7986Ай бұрын

  Nice one bud

• 
  @jfkenpoman1Ай бұрын

  thank you mate, hopefully ill have another video up tomorrow before returning to work on wednesday

• 
  @Kieron-ny8ixАй бұрын

  What was the app for the iPhone sound test

• 
  @jfkenpoman1Ай бұрын

  Thanks for your reply, the app I used was this one apps.apple.com/app/id448155923. I also used another one as well which was this one: apps.apple.com/app/id1590659820

• 
  @crazycressy7986Ай бұрын

  Were you getting a problem with the dipod as it's set on the picatinny rail ,or just holding the shroud rail ?

• 
  @jfkenpoman1Ай бұрын

  Thank you for your comment, like many others when holding the rail towards the front of the rifle when shooting it was changing the POI so with the new rail having no flex there should be. No POI change

• 
  @adey1771Ай бұрын

  Did changing to the metal rail sort the poa problem out ? Ps enjoy your vids 👍 6:58

• 
  @jfkenpoman1Ай бұрын

  @@adey1771 hi there thanks for your comment. I would say yes it has. I will hopefully uploading the 2nd part today to show the groupings. I did record it the other day but for some reason the sound didn’t record so I’m re-doing it today 👍

• 
  @Ratsinthereticles2 ай бұрын

  Sublime Jon great set up 👌🏻

• 
  @jfkenpoman1Ай бұрын

  Cheers Denny loving your vids as well mate👍

• 
  @kenbraeken54062 ай бұрын

  The foam wich you took away is the one you're supposed to fit the gun ;-)

• 
  @snova80332 ай бұрын

  Would have been good if you had the sound on for the first third of the video.

• 
  @crazycressy79863 ай бұрын

  Has the carbon sroud got a foam lining ? Thinking of lining the standard sroud to see if it makes it any quieter?

• 
  @jfkenpoman13 ай бұрын

  Thank you for your comment, it doesn’t and I have had the same idea using pipe lagging to see if it makes any difference 👍

• 
  @crazycressy79863 ай бұрын

  @jfkenpoman1 you have 2 weeks to try before I get my vixen. lol might save me a job, lol .I have some sheets of felt and 3mm EVA sheets was going to mask off any threads and use carpet spray or make a cage covered in felt to slide into the tube ??

• 
  @crazycressy79863 ай бұрын

  Nice shooting ,can you please do a video on how you swap the forend ,I was thinking of shimming mine when I get it only about 2.5 weeks before I order it lol

• 
  @jfkenpoman13 ай бұрын

  Many thanks for your comment, I’m not the best shot in the world lol but yes of course I will show how to swap the guards over and then do another zero session.👍

• 
  @crazycressy79863 ай бұрын

  @@jfkenpoman1 got them all in and touching ,did a great job m8

• 
  @jfkenpoman1Ай бұрын

  Thank you for your comment here is the video showing the fitting of the metal rail. kzread.info/dash/bejne/qIiL1NSYcrC5grw.htmlsi=m_af7GuNpSQqQ9vL Cheers. Jon

• 
  @crazycressy7986Ай бұрын

  @jfkenpoman1 I seen it and commented 3 weeks ago lol

• 
  @jfkenpoman1Ай бұрын

  @@crazycressy7986 ah yes you did sorry mate 😳

• 
  @billmasen39233 ай бұрын

  Does George do a 25mm shroud kit instead of the 50mm kit?

• 
  @jfkenpoman13 ай бұрын

  Thanks for your comment Bill, as far as I’m aware George doesn’t do a 25mm shroud. You’d be better off asking him yourself on the FB Vixen page 👍

• 
  @billmasen39233 ай бұрын

  I would really like a 25mm diameter shroud kit instead of a 50 mm of any type (alloy or carbon) . I dont think anyone makes em though.

• 
  @billmasen39233 ай бұрын

  Another great article on the Vixen, well done. Glad you are better. I have removed the shroud completely on mine and sleeved it with carbon fibre tube. I use a xeperate moderator where needed.

• 
  @jfkenpoman13 ай бұрын

  Hi Steven thanks for your comment, mine loves either JSB Diablo 15.89 or JSB hades of the same weight. They both give consistent tight groups when I do my bit. They also produce 11.2 ft/lbs safely inside the limit 👍

• 
  @stevenpritchard35193 ай бұрын

  Yo, what’s its best pellets?

• 
  @frankarmstrong94143 ай бұрын

  Hi would u say the carbon shround is quiter then your silencer ? Only askin as thinkin about buying the carbon shroud thanks

• 
  @jfkenpoman13 ай бұрын

  Hi frank, thanks for your reply. It is very close the silencer is marginally quieter but is longer than the shroud. Only about 0.5 a decibel in it from memory. The rats aren’t going to hear that. But it’s easy to swap over if I need too. 👍

• 
  @jfkenpoman14 ай бұрын

  No worries if I hear of any bottle changes I will post on KZread mate 🙏

• 
  @RobertLittlejohn-rm1yu4 ай бұрын

  How many shoot do u get with the standard bottle...Can y put a bigger bottle on it

• 
  @jfkenpoman14 ай бұрын

  Hi Robert thanks for your question. I get somewhere in the region of 160 + shots from my 300 bar fill. I’m sure a larger bottle could be fitted but I haven’t heard of anyone actually doing this yet🙏

• 
  @RobertLittlejohn-rm1yu4 ай бұрын

  @@jfkenpoman1 thanks you for your help

• 
  @malcolmdonnison39874 ай бұрын

  This doesnt show much at all 😮

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comment, I don’t understand your comment? In what way doesn’t it show much?

• 
  @malcolmdonnison3987Ай бұрын

  The title is about a sound test not a barrel cleaning lesson 😮

• 
  @stevenpritchard35194 ай бұрын

  30m target please

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comment, when this weather settles I’ll get out and do some range testing 👍 I’m old school so use yards lol but will do some at 27yds (zero range), 30,40& 50 yds 👍

• 
  @gbstrobo02 ай бұрын

  Can you still get a hold of George i would like a shrout for the short . Found one for the long version on ebay , bud that was not sold buy George an d i can't find him greetings

• 
  @jfkenpoman12 ай бұрын

  Hi mate if you go to the FB group for the Agt vixen you will find George on there. Alternatively look at my video on the shroud I’ve left a link for George on that one. Many thanks for watching the video Jon

• 
  @stevenpritchard35194 ай бұрын

  Yo, can you describe “clean” barrel ? Does cleaning the barrel de-lead the barrel ?

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comment, yes de-leading the barrel removing the deposits left from firing pellets through the barrel. I like to do mine every 6months or so 👍

• 
  @stevenpritchard35194 ай бұрын

  Have you tried this at a HFT club ?

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comments Steven no I haven’t I use the gun solely for pest control purposes 👍

• 
  @Mush1794 ай бұрын

  Thanks for your time and effort 👏.subscribe 👍

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comment it’s very welcoming 👍

• 
  @billmasen39234 ай бұрын

  I snapped the three pronged alloy internal silencer just trying to get it off, tried, oil, heat, hot water, NOTHING worked

• 
  @jfkenpoman14 ай бұрын

  Hi Bill thanks for your comment, sorry that this has happened to you, you’ll be better off getting one of George’s carbon shrouds then, as they have an internal baffle system fitted. Good luck with whatever you decide. Keep us posted 👍

• 
  @billmasen39232 ай бұрын

  @@jfkenpoman1 What I actually want is a slimmer shroud, perhaps 25 or 35mm rather than the standard 50mm shroud.

• 
  @jfkenpoman12 ай бұрын

  @@billmasen3923 ah right I don’t think George does a slim one and haven’t heard of anyone else making them sorry mate 👍

• 
  @crazycressy79864 ай бұрын

  Very smart ,only one thing i dont like ,,,your costing me money😅 just over a month to go, and i can cash out some of my pension, deffiantly getting a Vixen, then in june our gold sovereign hoard goes to auction so i see a case and NV coming ,my land owner has agreed for me to shoot vermin and theres lots of barns and woods ,that Vixen will be rather busy

• 
  @adventurebeforedementia.22484 ай бұрын

  Hi Jon,where did you get your But Pad from?

• 
  @jfkenpoman14 ай бұрын

  Hi there many thanks for your comment/question I bought it from eBay here is the seller details JB3D custom 3D printing Item number 133929402308.

• 
  @jfkenpoman14 ай бұрын

  Hi Michael thanks for your comment. I use Uttings for all my hunting equipment. Good prices, great service to boot.👍 www.uttings.co.uk/

• 
  @michaelartingstall37854 ай бұрын

  Great video can you let me know the supplier of your hard case?

• 
  @Reculse4 ай бұрын

  You measure the sound with countless reflective surfaces around....

• 
  @jfkenpoman14 ай бұрын

  Thank you for your reply it is difficult to get these things done with the sun etc that’s why I included the results at the end of the video 👍

• 
  @jfkenpoman14 ай бұрын

  Thank you for your comment you will not be disappointed with the gun

• 
  @crazycressy79864 ай бұрын

  Can't wait to cash in some of my pension, going to get the exactly the same set up as you ,but will have fun setting up the nv scope lol