Short Cut Video Guides and Setups.
Short Cut Video Guides and Setups.
Bite sized setup guides, unboxing, tutorials, and sometimes unsolicited opinions and other such nonsense related to photographic and video lights, lighting, products, and.... I think you get the idea.
Пікірлер
This AD600bm is not triggered how can I do it am engineer
I need more info. Are you within 1 meter? Which trigger are you using? Do you hear any beeps? Etc…
What is the diffrence between bm and b veirsion are they similer
BM is fully manual, no TTL.
Mine will not change out of 14mm
If you’ve pulled out the wide reflector, it stays locked at 14.
@@ShortCutGuides thank you
If you wish to use the bounce card (which only comes out with the reflector), simply put the reflector back in while leaving the card exposed.
Thank you
Awesome - thanks, this was really helpful...
Can this work with non godox speedlight like youngnu
Sort of. You can setup some flashes to respond to a pre flash to then fire off with other flashes, but as to the proper wireless of these transmitters and other Godox flashes, the answer is no.
Can you use one in the hot shoe as a master that will fire with the camera shutter and trigger the other flashes at the same time? I'm currently having to use the N1 sony trigger that has a hotshoe mount on top to enable the other flashes to fire. When I take the 860v ii out of the hotshoe it only then works to trigger the other flashes. Is there a solution for this?
What settings for Lumix fill in flash? Is the. model the 3500 for Lumix and Olympus?
The settings on the flash should be the same for all TT350 Flashes. Lumix camera itself will need “fill flash” enabled.
You saved my ass
Thank you for the perfect video for the tt350. Just right to the point.
Thank you very distant friend, I'm watching your video in 2023 and using a Nissin and very satisfied.
Great tutorial details. Can I use a TT350o on my Olympus (as Master) to trigger a TT350s (as Slave)? This would allow me to use my friend's flash remotely and not have to buy another and drag it along in the (full) camera bag. Thanks.
You bet! Just make sure your firmware is up to date.
This is a good revue video. Too fast for a newbie.
You have them set up in slave mode already....so now I have to go and find another video on how to do that....
Simple and to the point
Thanks, this helped!
Thank you
Thank you
My test fire is not working when pushing the on board button. Is there a reason why it doesn't?
Horrible instructions. I need to know how to sync it with my camera
is TT520ii can do with 1 master and 2 slaves?
Bought the BM version over 3 years ago now on a killer black Friday deal. It is my work horse. The only thing I fear is for it to fall.
I feel you bud 😅
Thank you so much 🥰💕
What if the slave flashes aren't radio accommodated flashes but can be set to slave modes? Can they still be setup and power adjusted?
I’m new to using flash. If I buy a trigger for this will I also need a receiver that connects to the flash or does it already receive a signal as is?
not sure but mine not blink after i press test button button for high speed
If anyone can answer this please. Can you use the light while the power is plugged in at the same time or is it not possible?
Short answer is no. If you want to do that, there is an AC adapter available. Long answer: you’ll break your battery and risk fire.
@@ShortCutGuides thanks found the answer already 😂. Yes the adapter. Im getting me one of those. Thanks
This is THE BEST VIDEO!
Anyone know how to eject the bulb from its holder?
Just pull it out by hand. Just make sure you only touch the outside glass, not the bulb itself inside.
@@ShortCutGuides thanks! I was being too gentle with it haha
How to open modeling light in AD600.
Thank you! This was amazing!
Is the Godox AD600B compatible with the Godox X2T?
Gracias por la traducción en Español, he logrado hacer funcionar el flasch con el emisor godox x1tc. muy buen trabajo.
she dont have any sound beep like tt600 or tt685 when after flash shoot and recharge power?
That is an option you can enable/disable in c.Fn menu.
@@ShortCutGuides it just - st (standbye) - AP (i dont know for what) - AF (light for focus) - ID ( i dont know for what - bl (backlight the screen)
I have a Sony A6600 -- how do I get the body to pick up the trigger? I have it attached but no trigger
Make sure your channel and group letters match for the flash you’re using. Also check that “fill” mode is enabled on the camera.
Will this flash work for the Canon R5? Thanks.
Should work great! Just won’t be able to control all flash functions from the camera.
Hi! Will this work in 3x tt600 and xt1t?
It should, especially on newest firmware.
wtf man, try to explain something. and slow down. Jesus, some of us dont know anything yet. thanks for posting none the less
Ah, but it’s quick. Other vids do details.
OK but how do you do wireless HSS with the X1T and V860 ii
When you raise the shutter faster than 1/200 you get only partial bar of flash in the image and the rest is dark
Which camera brand are you using? Some you setup in camera like Sony and Fuji.
I just came here to see how to boxit back...
Why in manual it goes to mail to everyrime
Hi! I am not sure what your meaning was here. What can I help with?
@@ShortCutGuides just wonder when I put my light in manual and I pop the strobe it says multi
Ah. You haven’t pushed the mode button enough. TTL - Multi - Manual.
@@ShortCutGuides I have it set to Manual once flash fires multi is there on the strobe it still works but it should not say multy what am I doing wrong
I see, then you probably have multi in your trigger then. When in slave mode, the strobe takes info from the transmitter.
Sir your video is the only video talks about the flash and all the buttons. Thank you.
Happy to help!
Think I heard you say high speed sync. Was thinking between that, the Godox 400pro or the xplor 400-600. Looking for a good hss/TTL for outdoor and indoor use.
Speaking very generally, more power will give you more options for creative lighting. However, not all applications need “maximum powa!” so depending on your needs, or your wallet, you can decide how much is necessary.
Godox does NOT support phone sync anymore. Got this Information from #Godox. Only Profoto will do this
Indeed. This video is from 2018, and Godox has discontinued this product.
You went through at a reasonable pace and showed how to do things, but like other videos of other gear, how to get out of and back to just the TTL mode you do quickly and I find it difficult to catch. So now I'll probably spend hours trying to get out of MULTI>
I love the video. I want to know how can I adjust the flash power levels without walking to each flash. How do I sync the flashes to accommodate that feature?
Old video but I'm watching from 2022 the highspeed syn didn't turn on on on my unit after keep pressing the flash test button
Does the TT350O Have a HSS? AND A STROBE Mode? 🙂 THANKS In Advance
Yes to the first, no to the second.
whenever I turn mine on the red test flash button dosent even become reds that coz of the batteries?
Very likely. I get best results with alkaline batteries. NiMH batteries are ok, but go through much faster.
Thank you. I usually use my V1 as my main speedlight for most work and sometimes I go to my V350 for occasional practice at home. Having said that, in most cases I do have my V350 as a fill light or hair light and as such it's almost always on Slave mode and that by far is the most annoying and counter intuitive thing to me on this flash unit because of how the buttons are named versus their function. They should have kept the sync button named as SLAVE with the existing flash sync icon beneath it and the last button should have just been named CH or GR with the vice versa below it. The few times I wanna practice with this unit as the master, I almost never remember how to change it back from slave mode.
I certainly agree. I assume they wanted less buttons due to its’ small size, but menu diving/double duty on some of these buttons are awkward.