Пікірлер

• 
  @slimreaper9Күн бұрын

  What issues made u have to change this part ?

• 
  @MoussiahАй бұрын

  I heard if a factory fan switch isn’t plug and play you just have to get it turned on with a computer.

• 
  @fredsmith3203Ай бұрын

  Good info, exactly what I was looking for

• 
  @user-cp7fn1td2y3 ай бұрын

  Hey big help dude . Having issues with safety switch ,thanks a lot for taking time n making this video.

• 
  @rooseveltrainesjr76186 ай бұрын

  It's just a simple toggle switch but u have to get the right amps. I did this to my motorcycle cycle. When it hot out or stop in traffic. That thing runs hot I fixed that problem. My fan I put on turn my factory 1 off. Also when they both work my bike stay cooler. Same concept. Different vehicles

• 
  @rooseveltrainesjr76186 ай бұрын

  Something going on with my clothes fan an solenoids. I noticed today my fan wasn't turning. Or turning slow. I researched an watch video. When my mechanic do fix my truck I will tell him I want this option to turn my fan on an off when I want not when the computer tell it to. Especially in hot weather or going up steep hills like driving thru Or. Or wy. Tks for the video. I have an 18 cascadia . Dd15

• 
  @PedroMartinez-nv7mz8 ай бұрын

  A very good videio

• 
  @duleiraldaloi9 ай бұрын

  Can I just delet it , like with out any swetch ?

• 
  @iwin78589 ай бұрын

  Well no you can't if you just remove the pedal switch then won't start

• 
  @duleiraldaloi9 ай бұрын

  I sow this vedio before 3 years and I did it , really was help me a lot when the wathere was hot

• 
  @adieldean844410 ай бұрын

  Not for kenworth or peterbilt

• 
  @dustinshepard3166 Жыл бұрын

  Thank you! I’ll be doing that

• 
  @dabaddd1 Жыл бұрын

  You have to cut ground , not + … then check engine will not pop up

• 
  @SinghSingh-lq3yf Жыл бұрын

  Good job ❤

• 
  @juliom8024 Жыл бұрын

  Where is the fuse for it?

• 
  @iwin7858 Жыл бұрын

  There is no fuse

• 
  @svldvc Жыл бұрын

  This is very helpful, thank you

• 
  @hectorbautista-xk4hy Жыл бұрын

  Hello again me, LOL thanks for the big help! I did it and it works, only one more question. When you use the Jake Brake the wires don't get hot? No need for a relay? Thank you so much man. Respectfully.

• 
  @iwin7858 Жыл бұрын

  No they don't I had mine for over 3 years never gets hot

• 
  @hectorbautista-xk4hy Жыл бұрын

  @Iwin 78 you're the best my friend 😎

• 
  @hectorbautista-xk4hy Жыл бұрын

  Hey man can you leave the switch on pedal or teka it off?

• 
  @iwin7858 Жыл бұрын

  Yes you can but your engine brake won't work

• 
  @hectorbautista-xk4hy Жыл бұрын

  Hey man just wandering, do you need to remove the switch? Or leave it on pedal?

• 
  @sinblaze1 Жыл бұрын

  The music is MOST annoying!

• 
  @iwin7858 Жыл бұрын

  He is calling you will you answer?

• 
  @BillVolo7 ай бұрын

  Amazing Grace! That's nice!

• 
  @jamiehill327 Жыл бұрын

  best one i done seen thank you

• 
  @garrettlewis826 Жыл бұрын

  If you could reply asap I am new and had to do some electrical diagnostics and I believe I may have put the plugs in wrong what is the order of the big plugs by the air box

• 
  @MK-yg3go Жыл бұрын

  my fan it’s running slow and when i unplugged it turns on . can it be the solenoid?? or something else?

• 
  @moebenjeddou782 Жыл бұрын

  Thank you for the helpful video , my truck started but wont go in gear what could be the problem ?

• 
  @ricardocastillo2251 Жыл бұрын

  Great job bro, help me alot my cascadia turn fan on up to 220 degrees so, its so hot to go on. Better with this thing we do manually that way keep engine cooler

• 
  @themechanic1034 Жыл бұрын

  Im being serious. I really liked the background music. Had me humming while watching the video.

• 
  @AJ-sr2dv Жыл бұрын

  Ive got a 2013 Cascadia. Production was 9/12. Mechanic said the sam cab would have to be programmed but Ive heard it dosent have to be prior to 2015. What is your experience. Do you think i could get a used one without programming. Thanks.

• 
  @iwin7858 Жыл бұрын

  Hi yes you can use another one without programming but the sam chasis you have to

• 
  @AJ-sr2dv Жыл бұрын

  @@iwin7858 Thank you

• 
  @themechanic1034 Жыл бұрын

  @@iwin7858 no, the sam chassis doesn't have to be programmed.

• 
  @shawnadams2733 Жыл бұрын

  I can’t seem to find one for a 2012 I see a bunch of sellers that are selling them 2008 through 2010 and it looks identical to this one. Do you know if it’s the same?

• 
  @iwin7858 Жыл бұрын

  Cheaper from the dealer

• 
  @Derz9 Жыл бұрын

  Thanks

• 
  @jazzsidhu3423 Жыл бұрын

  so precise what i was looking for, Thank you Boss!!!

• 
  @sinyadelaroca61382 жыл бұрын

  So what's the name of the hose?

• 
  @iwin78582 жыл бұрын

  Any heater hose size 5/8 don't use 3/8 it's a little big for the fitting

• 
  @moebenjeddou7822 жыл бұрын

  Plug to solenoid has only 2 volts !! How i can fix Ot

• 
  @davlethud68042 жыл бұрын

  Thank you so much. Fixed

• 
  @Eric234462 жыл бұрын

  So both hit goes on toggle switch on positive negative?

• 
  @iwin78582 жыл бұрын

  Just the positive

• 
  @Eric234462 жыл бұрын

  @@iwin7858 my toggle switch haves two wires coming out of it. So do I leave one alone or just connect both hot to those wires ?

• 
  @iwin78582 жыл бұрын

  @@Eric23446 both hot

• 
  @RemySkyye2 жыл бұрын

  I have no power to my solenoid and wish I knew where the fuse is located

• 
  @victory32512 жыл бұрын

  exactly what I was looking for u save me a lot time. thank u

• 
  @adamstowing2 жыл бұрын

  Thank you. I wasn’t sure where to access that from and you showed me exactly what I needed to know

• 
  @michalwojciechowski15902 жыл бұрын

  Perfect 👌

• 
  @jamesstanley35132 жыл бұрын

  Yes definitely explain less until you really understand the valve operation. But I applaud you for trying and repairing your issue.

• 
  @leeb24642 жыл бұрын

  Is there is Anyway you can help me find out why my break not release on my trailer I replaced all the valves on the trailer and the truck they’re still not releasing on trailer

• 
  @palmbridge29872 жыл бұрын

  Brother I’m having the same problem today, did u find out what the problem is. Are you having problem with trailer tires not moving because no air is building?

• 
  @elmymontoya4681 Жыл бұрын

  I have the same problem how you fixed yours guy’s with the trailer knob not staying in

• 
  @magnoliaperez68982 жыл бұрын

  cool

• 
  @lt51842 жыл бұрын

  Good job but explain in less 🙂 time

• 
  @hectormorales31092 жыл бұрын

  😇

• 
  @roselianomartinez42622 жыл бұрын

  where is the solenoid fuse located?

• 
  @betriHaqi24622 жыл бұрын

  Thank you its help

• 
  @user-bv6cp6xp9o2 жыл бұрын

  I changed the solenoid but the problem persists. the fan does not turn off from high speed to low speed

• 
  @Elias444shorts2 жыл бұрын

  How did you fix that problem 😳

• 
  @user-bv6cp6xp9o2 жыл бұрын

  the problem has not been fixed yet. in winter the problem occurs less often

• 
  @piggysonspeaks6312 жыл бұрын

  👍💯

• 
  @veselchaq2 жыл бұрын

  What is the amperage at the solenoid? Is a simple one throw switch enough? Or will it someday just bite you in the ass if you don't use a relay?

• 
  @kingmike403 жыл бұрын

  The lines on the truck I drive were replaced last week with metal lines.

• 
  @pookieslim3 жыл бұрын

  My AC doesn't work when my truck is not moving... Please help

• 
  @martymc922 жыл бұрын

  Few options . Your high pressure switch might be defective. Try to disconnect the plug from the fan clutch solenoid so the fan clutch actives and check if the AC blows cooler. Second option is to hook up the AC gauges and check the pressures on the system. If the low side is too high you might have a defective expansion valve or a clogged condenser

• 
  @countywatts59643 жыл бұрын

  I love you outlaw I thought it was some wrong with my truck and this all it was mane keep trucking outlaw you help a lot I will be linking to your channel