Пікірлер

• 
  @Carito073 сағат бұрын

  How do you set it up to work in feet and inches ? Also so your dimensions are in feet and inches when you go to layout on a page ?

• 
  @sake_tz16 сағат бұрын

  kzread.info/dash/bejne/d4WLrbSCocyueag.htmlsi=XCvKh4ndY7r-ihV6

• 
  @samt9097Күн бұрын

  I have to solder razer tartarus v2!

• 
  @Dantie00001Күн бұрын

  love this question are you planning on selling this?

• 
  @livetohash61522 күн бұрын

  I watched this and a few other vids, n went from bird poop all over my boards to beautiful points in a few days. ... Thx so much! I still use flux on all my joins, n just spray it off after. Keeping my tip clean was NEVER a thought, but now I'm Capt Clean after every touch 🎉🎉 I even go as far as to mark my solder roll every 5mm with a sharpie to be sure I don't just feed it in like a madman 😂

• 
  @josiejoestar67792 күн бұрын

  Looks amazing, can't wait for the guide! Any plans to add something like a built-in stratagem hero?

• 
  @datbrokeboi74403 күн бұрын

  after watching this I'm no longer afraid to replace the joysticks in my controller, bought a whole setup just to get into soldering and this will be my first try with a proper iron. First try was using one of those wall plug ones and ended up ripping pads out since it was too hot and cooked the pcb

• 
  @theverybestyoutubeaccount3 күн бұрын

  this is fake

• 
  @ashwinsinha51284 күн бұрын

  very helpful very nice

• 
  @TMracer734 күн бұрын

  I wish I watched it before I stared. Made so much mess and who know how many sold joints

• 
  @genkishan4 күн бұрын

  Noob++ here interested in arduino etc suddenly OMG realized I have to learn how to "sauder" 🙀Really appreciate your step by step methodical and crystal clear guide How To with explanation to understand even better the Whys, the Dos and Don'ts. Listening carefully and taking notes to acquire my very first ever iron kit

• 
  @troelsvk5 күн бұрын

  The most important information regarding soldering is that tin and copper creates bronze. Bronze is very strong, while copper and tin is soft. So it is importance that the two material, which you want to solder, is actually physically touching during the soldering process.

• 
  @PoloKingDX7 күн бұрын

  I feel equiped to mod my GBA with this newfound knowledge. Thanks!

• 
  @MilagrosGF7 күн бұрын

  hello, excellent masterpiece!!! Are you going to do a tutorial? i'd love to try to do it at home.❤

• 
  @LiveEasy7 күн бұрын

  thank you for this!

• 
  @iTzTheSymbiote7 күн бұрын

  Ok buddy, how much for one?

• 
  @ricardoenescu84329 күн бұрын

  where can I buy this from 😮😮😮 ???

• 
  @chatwithjack783710 күн бұрын

  Glad to see that you're still posting! Best of luck with 3d printing stuffs!

• 
  @averagepotatoeater215110 күн бұрын

  Very glad not dead XD

• 
  @saiyan-cowboy10 күн бұрын

  I'd love to buy one. How much would it cost?

• 
  @anthonybustamante573611 күн бұрын

  Hey I love your work! I’ve wanted to make little game gadgets like this, but all of my skill points are in engineering and not art.. how would you recommend learning? Thanks!

• 
  @JacbeHemon12 күн бұрын

  Pls share how to build that thing it’s to smart and badass look ❤

• 
  @kehi625712 күн бұрын

  Hi. I was checking accessories for Nintendo Switch Lite and came to one of your videos. Wireless charging option covered back in 2020. Excellent video and what a great idea!! I also found an internal option that someone did but your "add-on" option is way better for the reason that the internal way has an issue and your way also allows the normal charging for shorter time. In your video, you said you would release STL after your Patreon. I checked Thingiverse but did not find it. Any idea when you will be releasing it to public?

• 
  @StealingToastIsFun13 күн бұрын

  you planning on selling this? I WANT ONE!!!

• 
  @enoraltheoutcast13 күн бұрын

  Can you input terminal codes with it?

• 
  @Nurof3n_15 күн бұрын

  do you intend to release the model?

• 
  @SN3Gaming_15 күн бұрын

  This is awesome, I'd love to have this linked to a strategem ball for cosplay so punching in whatever strat, the ball will glow that color

• 
  @steff764513 күн бұрын

  red or blue, would be nice yes

• 
  @usernamedkjahstill500315 күн бұрын

  I prefer lead free. Especially seeing other countries have the awareness and common sense to ban products with lead in it. Rather keep options open for an international clientele. I'm the type of puts my games on the hardest setting right out of the case. I rather be good at it at the the most difficult way then okay at it with the more dangerous method

• 
  @MuTe8186 күн бұрын

  Always that 1 guy losing his mind over someone using lead solder. Settle down with your pretentious comment.

• 
  @DanielMartin-eq2kk15 күн бұрын

  Have you seen the 128k view short sir?

• 
  @wermy15 күн бұрын

  I guess not? 🤔

• 
  @DanielMartin-eq2kk15 күн бұрын

  @@wermy Oh okay then well here’s the link to the short then

• 
  @DanielMartin-eq2kk15 күн бұрын

  @@wermy kzread.infoetx6uggk3aA?si=CcHIqA-DoVr_yWRX

• 
  @crashheadlong39716 күн бұрын

  anyway the software could be a phone app?

• 
  @kevinc821716 күн бұрын

  Is there a way to get it to display the map as well? Would be really cool for cosplay

• 
  @Verminator15102916 күн бұрын

  I know this video is quite old, but thank you. What I really need to know, that wasn't covered, is the THICKNESS of solder to get when mainly working with 2.54mm pitch boards? Can someone help out with that please?

• 
  @user-jc9ed2yi1w17 күн бұрын

  if any one is still here, explain me about this red wire ,and where to get it <3 btw thanks for the video !

• 
  @marcoslima63818 күн бұрын

  For Democracy!

• 
  @StoneyBaloney2218 күн бұрын

  ESP 32 project! Nice!

• 
  @Thjesht_Teo18 күн бұрын

  I like the face at 10:12 😂

• 
  @justteresiah18 күн бұрын

  Learning this so I can stop relying on my dad to solder for me 😄

• 
  @danlane991718 күн бұрын

  That's great!

• 
  @8828beaniester19 күн бұрын

  Yooooooo; when and where are you selling? I need it for if HD2 is ever VR compatible. 😂

• 
  @midas422719 күн бұрын

  SHUT UP AND TAKE MY DAMN SUPER CREDITS

• 
  @williamdick665020 күн бұрын

  If you sell these I would buy one instantly!

• 
  @rofl_studio20 күн бұрын

  Лучше игровое сообщество в мире!!!!

• 
  @ovodomina20 күн бұрын

  Is possible build one with the ESP32 CYD?

• 
  @gerrit752020 күн бұрын

  pleaaaassseee share the stl and tell us what we need to build this too.

• 
  @byrandavies705520 күн бұрын

  Can you post the STL file for this here or on thingiverse? 😁😁

• 
  @natefort729420 күн бұрын

  Very Democratic!

• 
  @AntiToxic4u21 күн бұрын

  Could you do this for ps5? Bro you should sell these

• 
  @johnbaker823620 күн бұрын

  Yes, please! 😁

• 
  @christophercollins914521 күн бұрын

  Man! Where do I get one!!!

• 
  @jonathanturner811721 күн бұрын

  I know this is an older video from you, so not sure if you're still looking at these comments. Thank you so much! This was exactly what I was looking for to get the basics down and begin the troubleshooting process of Fusion360. Been 3d printing for a very long time and wanted to get into making my models for my drones. This was a great starting step to get my through the basics, working with existing models, and all that. Wonderful video!

• 
  @bennetthome0122 күн бұрын

  Could you make one with a hdmi port at the top?