Пікірлер

• 
  @yerigelmisken5 ай бұрын

  It is very clear explanation. Thank you. You published this video 15 years ago. It is the miracle of youtube. Nothing disappear or vanish in the infinity of these internet space as soon as you search with a proper keyword. But surprisingly nothing changed in the technology. Surprisingly there are only 2 comment. I want to be the third. Regards

• 
  @shrikantpadwal35392 жыл бұрын

  hi sir shako product available in India?

• 
  @laidpily74733 жыл бұрын

  Thank you so much for this video , it's helpful one

• 
  @Lily124333 жыл бұрын

  This was the day I was born

• 
  @tendaimazaiwana38124 жыл бұрын

  Can it handle 1500 litres per day ?

• 
  @martinfreye4 жыл бұрын

  Hello, price depends on valve, please contact www.solenoid-valves.com for price

• 
  @user-fe7lj1ps6e4 жыл бұрын

  How much

• 
  @faizulhasnain28714 жыл бұрын

  kzread.info/dron/JqA7pkycGi3vQi8_DD_FuA.html Please subscribe my youtube channel and Share this link with your friends also thanx

• 
  @multidimensionalexploratio39855 жыл бұрын

  Thank you so much for taking the time to put this video together. Great show and tell!

• 
  @LAnonHubbard5 жыл бұрын

  What type of potato was this filmed using? Looks like a King Edwards?

• 
  @martinfreye5 жыл бұрын

  Charlotte

• 
  @LAnonHubbard5 жыл бұрын

  @@martinfreye Ahh, yes I can tell now by the vignetting.

• 
  @engjawdat1785 жыл бұрын

  Great

• 
  @boumezanouar6 жыл бұрын

  its the 81th now :D

• 
  @muhammadnoor91086 жыл бұрын

  Thank you :)

• 
  @SlimTortoise6 жыл бұрын

  I have a Solenoid valve that operates external to a Gas safety valve,(it pushes the gas valve open) I noticed it was sticking from time to time (stopping the initial start of gas flow), So cleaned the piston and added a small amount of grease to the shaft, it now works OK. My question is what does anyone think about adding a lubricant to the solenoid?, or does anyone think it would be best to replace the solenoid for a new one? any views would be appreciated

• 
  @martinfreye6 жыл бұрын

  Bake been . You should be ok. There may have been a blockage temporally in the tube. You can phone Mike on 080088099 "Connexion Developments Ltd" or email [email protected] and he will advise.

• 
  @SlimTortoise6 жыл бұрын

  Thank you Martin for you quick reply and your advice, I think I'll see how it goes, with the added safety that if it does not work, then no gas flows The gas valve is sound and the system also cuts the flow of Electricity to the solenoid (if not engaged within a few seconds) there is also no electrical damage that I could see during cleaning and inspection Thanks again martin

• 
  @martinfreye6 жыл бұрын

  Bake been bylaws everything seems ok, I'm here if needed. Best, Martin

• 
  @fawzability6 жыл бұрын

  i think it's a poppet not spool. Spool is better

• 
  @madhusudanpanda436 жыл бұрын

  good process system

• 
  @archstanton95476 жыл бұрын

  Happy belated 80th!

• 
  @martinfreye6 жыл бұрын

  Thanks Arch. Much appreciated. Getting ancient now!

• 
  @martinfreye6 жыл бұрын

  Hello again Mike, I've looked at your challenge. I think that a 'Direct' solenoid valve would be helpful, such as the PU220 series, the PU225 series needs a half bar differential to work, although your pump may supply this. The difficulty may lie in the return, if there is a chance of water returning to the tank, it would probably pass backwards through the valve. The valve would operate ok forwards from your tank to the plants. They only need wiring into the pump electric supply as they would then only open when needed. Best to enquirer from Mike at [email protected] as he is the main man and I am retired now, being very old. Tell him I sent you and suggested the Pu220 series in whatever pipe size you need. See the video, the PU220 series has the coil central, not offset. Hope this helps, you can telephone if you like +44 1454334990 . All the best from England, Martin

• 
  @mikewhit21976 жыл бұрын

  Hello Martin, I'm Mike in Colorado and I have some issues. I'm lucky enough to be part of a big medical grow facility and we use 1.5 HP pumps to water 280-320 plants multiple times per day. Our 800 gallon tanks set on the ground and our irrigation lines run in a trench about a foot under the ground. The problem that we are having is after the pump finishes a water cycle and shuts off, the water pressure is too much for our cheap PVC check valves and on one occasion, almost emptied the whole tank in one feeding. Due to this issue, we can only fill and mix 450 gallons at a time without gravity feeding. I'm hoping these solenoid valves could be the answer. Can they be wired to the pump so that the valve only opens when the pump turns on, and closes when pump is off? Any input would be much appreciated. Thanks!

• 
  @martinfreye6 жыл бұрын

  Hi Mike, I'll have a think and Mail again tomorrow. Martin

• 
  @sidcoronel38936 жыл бұрын

  Hi, Can a faulty Pressure Control Valve, of a diesel car's fuel injection pump, cause hard starts in the mornings ? You see, I've checked almost everything else (battery, starter, glow plugs, EGR, MAF, etc., etc.) and all working well. The hard starts only happens in the morning, I dont get hard starts throughout the day, not in between trips, not even between short trips. Hope you can help. Thanks in advance !

• 
  @martinfreye6 жыл бұрын

  Sid Coronel I don't have an answer for you. You should ask an automotive engineer. Sorry I can't be more help.

• 
  @kennethnicklowicz10306 жыл бұрын

  My cool died. Do you sell replacement coils

• 
  @kennethnicklowicz10306 жыл бұрын

  I had mine on for about 2hrs and it died. Same exact inside guts but cheap larger coil. The first one you showed. If you sell just the coil I'll hold onto the one I have as I just ordered a motorized ball valve for water mains so I can shut it off remote if I need to

• 
  @martinfreye6 жыл бұрын

  Quick answer is probably yes but contact the Company with details of your valve and coil so they can confirm if it is possible to replace it.

• 
  @kennethnicklowicz10306 жыл бұрын

  Martin Freye yes it comes off. I can send pic to confirm size. How much are they

• 
  @martinfreye6 жыл бұрын

  Kenneth Nicklowicz ask the Company Connexion Developments Ltd 08008087766

• 
  @JShel146 жыл бұрын

  thanks for taking the time to post this video!

• 
  @dennisrose407 жыл бұрын

  Thank you!

• 
  @madyjules7 жыл бұрын

  Thanks so very much!!! ( from the States )😁

• 
  @aishwaryasaxena99037 жыл бұрын

  Thank you for this video! Super easy to follow and understand

• 
  @kikii17 жыл бұрын

  You are one mad hatter but you have an amazing smile.

• 
  @muhammadirfanshahdubai60967 жыл бұрын

  u are so good sir

• 
  @aMulliganStew7 жыл бұрын

  ingenious

• 
  @samuelvermeulen82248 жыл бұрын

  hello do you have valve for air that have 3000 psi coming from a tank bottel this is for new design of air riffel greetings

• 
  @samuelvermeulen82247 жыл бұрын

  yo bro haw about tevas air riffle 3000 psi and i want a air valve that have 3000 psi bro whats you problem bro most air riffles have 3000 psi bro

• 
  @samuelvermeulen82247 жыл бұрын

  in a bottel bet i am looking for a air valve that works like a solenoid valve electronic trigger. the texan air force can handel 3000 psi easy

• 
  @samuelvermeulen82247 жыл бұрын

  thank you. nice. I will have a look greetings

• 
  @muradali30508 жыл бұрын

  thanks Great Presentation

• 
  @wingedbull12578 жыл бұрын

  what is the right Solenoid Valve for Air pressure at max 20 PSI? Air goes In Only, So in another I am Pressuring an Air Tank I want the air goes In only, so when the tank is at 20 PSI I don't want air coming back through the Solenoid, Thank you sir.

• 
  @hassannawaz23218 жыл бұрын

  IS THAT possible to control this valve with PLC

• 
  @muhammadasad5247 жыл бұрын

  hassan nawaz yes it is possible

• 
  @martinfreye6 жыл бұрын

  Yes it is, ask the Company Connexion Developments Ltd

• 
  @AirmaxPneumaticsLTD8 жыл бұрын

  Check out RM Series Solenoid Valve at here.. branded.me/airmaxpneumatics/52-way-single-solenoid-valve

• 
  @martinfreye8 жыл бұрын

  Best to ask the supplier, freephone 0800 808 7799 speak to anyone, Mike is the bossman

• 
  @klinci338 жыл бұрын

  Hi, i plan on installing a few EVs in my house, however i'm a bit puzzled. I noticed that in the spec. sheet tables provided by the manufacturer it says that when providing DC power to the coil the nominal max. pressure values will be x% (e.g. 60%) less than stated in the table. Can you explain why that is? Does the coil type affect performance? Thanks.

• 
  @martinfreye8 жыл бұрын

  Sulman, they do not require a maintenance program. Spare parts are available, seals and coils but although wise to keep spares, it's probably better to keep a spare valve 'In case'

• 
  @sulimanalmousa50958 жыл бұрын

  Do they require maintenance program? Do they require part changes ? & how frequent that should be ?

• 
  @clintmcdonald35038 жыл бұрын

  Great video! Wonderful boat tour!

• 
  @garytiani39628 жыл бұрын

  Nice video. But, I believe your explanation at the end is reversed. The electric solenoid opens to let the pressure out. That's the output side you are pointing to not the input side. The small hole in the rubber lets the pressure in and because the total surface area that the fluid pushes on is greater on the back side than on the front side the closing force is greater than the opening force caused by the fluid entering (pressure times area = force). That's why the valve only works if the pressure is greater on the inlet side than on the outlet side. The valve looks very well built. If my refrigerator ice maker had one that well built I would not be looking at videos to see what could be wrong with it. Thanks for the video it was very helpful.

• 
  @seatech449 жыл бұрын

  Painful

• 
  @lazarushayes9939 жыл бұрын

• 
  @ParamjitSingh-kr7rn9 жыл бұрын

  Excellent video Martin. It was really knowledgeable. Keep up the good work :)

• 
  @chettiar309 жыл бұрын

  Thanks a lot...almost understood its working...:)

• 
  @piumdealwis97379 жыл бұрын

  Nice video..thank you.

• 
  @alphacontrolsltd10 жыл бұрын

  Hello Martin, nice demo, how's Mike, regards Barry your friendly vat inspector

• 
  @STCValves10 жыл бұрын

  When you described the second valve, you correctly stated at the beginning that the arrow shows the flow of air. Then when you took it apart and showed how it worked you did it all from the opposite port. You stated that the pressure enters through the exit instead of the entrance which is probably why you were downvoted.

• 
  @ifenwu691210 жыл бұрын

  Mr. Freye, thanks for your sharing of experience. Each time I watched video, that always fresh mind and helpful in this field, even though they are all basic information.

• 
  @EgyptPaladin10 жыл бұрын

  how mush if its imported to egypt ? water and air

• 
  @ashwinravikumar14710 жыл бұрын

  that was a nice explanation... thanks for that and it feels great..

• 
  @thomasscoville114810 жыл бұрын

  I like you.