Thanks, good information. After doing the 1K service at the dealer, I didn't get anything but a 600$ oil change.
@HDlife518Күн бұрын
I just received mine today and noticed the parts zip tied to shock. If I install the with o ring/ c ring facing out, then it looks like I have two right shocks. They are identical. Is this normal?
@shanewoolsey9402 күн бұрын
Correct me if I'm wrong but wasn't the first FXR a stripped down bagger with a sportster front end?
@lovepreetmavi39153 күн бұрын
Do you need to upgrade the oil pump for a ‘23 M8 if the cam is the only upgrade you plan on doing?
@silentstorm1775 күн бұрын
How much cost that build? Im interested i have street glide 107 m8 stage 1.
@TuckerSpeed4775 күн бұрын
A build like that usually starts around $4,999.99 and goes up from there just depending on what you want to do. If you are interested, shoot us an email and we can get you a quote.
@markmcintosh70956 күн бұрын
It must be a blast to ride.
@brianthomas13597 күн бұрын
I believe Fueling lifters are made by Hylift Johnson, but not totally sure. What is your opinion on the Hylift Johnson's?
@petetownsend71428 күн бұрын
Tony thanks for the install video on the rear install, very complete and if it is followed its pretty simple. Yes, those Sputhe stock directions SUCK!!!
@_Arkenzie9 күн бұрын
How do you like the Baja designs as headlights?
@TuckerSpeed4779 күн бұрын
They are super nice lights!
@ryanhostad553111 күн бұрын
This easily turned into my favorite podcast episode of ANYTHING to date. We need more people like you guys and austin in this world, and the motorcycle community more then ever. It was refreshing to listen too and restored some faith I have in the world. Thanks guys 🤘
@briankilloran13811 күн бұрын
Well done… excellent instructor !!
@darrinleazer678412 күн бұрын
Just wondering if you have one for a 2015 Fatboy? My bike already has the VH shorty pipes along with a aftermarket air cleaner.
@TuckerSpeed47712 күн бұрын
There are a couple companies that make them, although your bike should already have an aluminum intake manifold so you don't need it as much as the M8 motors do. If you are wanting to upgrade anyways, I would suggest doing the HPI intake manifold/throttle body combo.
@weldermike701712 күн бұрын
Any chance of Sawicki making one that long for a FXR in the near future?
@ShedCyco12 күн бұрын
Thank you Dawgs! Mucho Love!
@chandlertunney12 күн бұрын
Park is the man!
@berealz970113 күн бұрын
I had to trash my tmax... caused so many issues for me. Switched over to PV and bike runs like a champ
@TuckerSpeed47713 күн бұрын
We also prefer PV, but you have to run the Thundermax on these turbo kits.
@berealz970112 күн бұрын
@@TuckerSpeed477 so what did you do with the O2 sensors? If i recall, the tmax has them attached to the ECM.... did you just zip tie them to the frame
@TuckerSpeed47712 күн бұрын
@@berealz9701 You still use the wideband O2 sensors. The turbo kit is made to accommodate them in the header.
@berealz970112 күн бұрын
@@TuckerSpeed477 gotcha, maybe i just missed that part.... looks great btw and can't wait to get an update from the road
@TuckerSpeed47712 күн бұрын
@@berealz9701 We might have skipped over it, we tried not to make the install too long and boring. But thanks for watching, we will have an update for everyone soon!
@fastone13613 күн бұрын
I got A 2019 m8 flhx.going to change pump and chest assembly.add a cam as well.but now?Harley should recall the whole damn motor.
@hydroboy35th13 күн бұрын
I have a 24’ Road glide and just purchased the SE-511 cam kit with their pushrods/lifters. Once zero lash is set on the pushrod is it 2-1/2 or 3-1/2 turns until it’s halfway down the lifter? I can’t seem to find the info of the thread pitch on the pushrod or the depth of the lifter.
@Pompomgrenade14 күн бұрын
Sounds great 👍🏾
@OnlyGainsPR15 күн бұрын
lmao 2024 rally, we need an update on the bike that was on fire!
@paulhewson460015 күн бұрын
Get the Art Alloy engine stabilizer for M8's...instant notice
@KurtisReed15 күн бұрын
Sounds insane! I want one
@cdominguez792915 күн бұрын
I've been thinking of it, and you did it! I f-ing love it. I'll stop by if I ever win the lottery 😂
@youraveragejoe764416 күн бұрын
I wish you were closer to Boise. I would love for you to cam my 19 sgs. Do you know of any Harley guys worth a damn in my area?
@TuckerSpeed47715 күн бұрын
We aren't too far from Boise, we have people bring bikes in from that area all the time. But unfortunately, I don't really know of any good shops in that area.
@headkick10016 күн бұрын
like to see how you dial in that thundermax have one on my bike think its dialed in pretty good [no turbo]👍
@JoeFurtado-xv5no17 күн бұрын
Just put one in my bike when I swapped out tires love the quality of that part
@JoeFurtado-xv5no17 күн бұрын
Great video, I just redid most of my primary installed a dark horse and Barnett clutch was pretty straight forward good point on measuring runout on the crank I got lucky on my 96” vtwin runout was at .003 I did this all before I completed my stage 2 on the bike next thing I’m buying is that baker attitude adjuster tensioner just ran out of $$$$ after getting all the S$S Camchest parts
@btldonkey8218 күн бұрын
One of the coolest paint jobs was 86 Liberty
@michaelcouey138319 күн бұрын
Man, I was all in until I saw the 4 to 6 week lead time :(
@TuckerSpeed47718 күн бұрын
We do have a few sets in stock, but far fewer color options. Shoot us an email and we can see what options we have available.
@chip983219 күн бұрын
Nah
@ATCJeremyrides21 күн бұрын
Solid dudes right there! 👊
@skiphavener468824 күн бұрын
I’m running one on my clutch side, 2020 Ultra Limited, made a huge difference in clutch engagement being there is no adjustment on the hydraulic clutch !
@myride721625 күн бұрын
The ac held it back
@dragoon41725 күн бұрын
Peep the f/m hoodie 😎
@Levixwelch26 күн бұрын
This Video is RAD! Austin is the man, it was super rad to meet up and hang out for a bit.
@Shooksoda26 күн бұрын
Thank you guys for having me on. It was a pleasure to share some of the hardships and victories of the project up until this point. 🙏🏽
@ann-marie237526 күн бұрын
I have Oberons on my Street Bob. Can't start the bike in gear 😕
@Bill-xx2yhАй бұрын
REMINDS ME OF.…AND JUST LIKE…THE "TWIN CAM" ISSUE OF TWENTY TWO YEARS AGO.
@arlendrewАй бұрын
Could it be possible that a bad cush drive isolator could cause a final drive belt to break?
@pompeyocastrojr4532Ай бұрын
Will it work on Harley breakout 2017?
@GQ321Ай бұрын
And much its going to cost,approx. $2,000😮
@donaldduck280110 күн бұрын
Without labor ?
@levi2040Ай бұрын
Any timeframe when they will be available for the 2024 models?
@LarsGalbraithАй бұрын
Thank you very much. That was very informative. I am I understood it all perfectly. Did a great job.
@johnnybotello4304Ай бұрын
Question if i may i followed all steps. Bike is working good but i keep getting CHECK ENGINE code PO330 and i cant seem to remove it. Once cleared it comes back. Bike works fine just code keeps coming back. Any guidance would be appreciated
@TuckerSpeed477Ай бұрын
P0330 code is for knock sensor issue. I would start with the connector on them.
@chadkirby5438Ай бұрын
Great install video!!plan on upgrading my system as well… what caught my eye was the chrome, crash bars, front and rear, where did you get those? I have the same bike but wicked red. I would love to get those crash bars!
@TuckerSpeed477Ай бұрын
We had the crash bars chromed when we had the frame done. They were just black Bung King crash bars.
@earlkozak6538Ай бұрын
So you gotta spend thousands to get the primary up to par on a basically new bike???
@danielgaskell5490Ай бұрын
I have a 2023 Road King Special with 4,600 mi.’s. At what mileage should I consider installing these upgrades?
@gregmcnutt6981Ай бұрын
Thank you very much for this video!! Great job!
@user-bl8bn4kb8mАй бұрын
Wood grain and detox… great people!!!
@thomastrevino7734Ай бұрын
Why do you prefer to grind the rivets instead of drill them?
Пікірлер
Thanks, good information. After doing the 1K service at the dealer, I didn't get anything but a 600$ oil change.
I just received mine today and noticed the parts zip tied to shock. If I install the with o ring/ c ring facing out, then it looks like I have two right shocks. They are identical. Is this normal?
Correct me if I'm wrong but wasn't the first FXR a stripped down bagger with a sportster front end?
Do you need to upgrade the oil pump for a ‘23 M8 if the cam is the only upgrade you plan on doing?
How much cost that build? Im interested i have street glide 107 m8 stage 1.
A build like that usually starts around $4,999.99 and goes up from there just depending on what you want to do. If you are interested, shoot us an email and we can get you a quote.
It must be a blast to ride.
I believe Fueling lifters are made by Hylift Johnson, but not totally sure. What is your opinion on the Hylift Johnson's?
Tony thanks for the install video on the rear install, very complete and if it is followed its pretty simple. Yes, those Sputhe stock directions SUCK!!!
How do you like the Baja designs as headlights?
They are super nice lights!
This easily turned into my favorite podcast episode of ANYTHING to date. We need more people like you guys and austin in this world, and the motorcycle community more then ever. It was refreshing to listen too and restored some faith I have in the world. Thanks guys 🤘
Well done… excellent instructor !!
Just wondering if you have one for a 2015 Fatboy? My bike already has the VH shorty pipes along with a aftermarket air cleaner.
There are a couple companies that make them, although your bike should already have an aluminum intake manifold so you don't need it as much as the M8 motors do. If you are wanting to upgrade anyways, I would suggest doing the HPI intake manifold/throttle body combo.
Any chance of Sawicki making one that long for a FXR in the near future?
Thank you Dawgs! Mucho Love!
Park is the man!
I had to trash my tmax... caused so many issues for me. Switched over to PV and bike runs like a champ
We also prefer PV, but you have to run the Thundermax on these turbo kits.
@@TuckerSpeed477 so what did you do with the O2 sensors? If i recall, the tmax has them attached to the ECM.... did you just zip tie them to the frame
@@berealz9701 You still use the wideband O2 sensors. The turbo kit is made to accommodate them in the header.
@@TuckerSpeed477 gotcha, maybe i just missed that part.... looks great btw and can't wait to get an update from the road
@@berealz9701 We might have skipped over it, we tried not to make the install too long and boring. But thanks for watching, we will have an update for everyone soon!
I got A 2019 m8 flhx.going to change pump and chest assembly.add a cam as well.but now?Harley should recall the whole damn motor.
I have a 24’ Road glide and just purchased the SE-511 cam kit with their pushrods/lifters. Once zero lash is set on the pushrod is it 2-1/2 or 3-1/2 turns until it’s halfway down the lifter? I can’t seem to find the info of the thread pitch on the pushrod or the depth of the lifter.
Sounds great 👍🏾
lmao 2024 rally, we need an update on the bike that was on fire!
Get the Art Alloy engine stabilizer for M8's...instant notice
Sounds insane! I want one
I've been thinking of it, and you did it! I f-ing love it. I'll stop by if I ever win the lottery 😂
I wish you were closer to Boise. I would love for you to cam my 19 sgs. Do you know of any Harley guys worth a damn in my area?
We aren't too far from Boise, we have people bring bikes in from that area all the time. But unfortunately, I don't really know of any good shops in that area.
like to see how you dial in that thundermax have one on my bike think its dialed in pretty good [no turbo]👍
Just put one in my bike when I swapped out tires love the quality of that part
Great video, I just redid most of my primary installed a dark horse and Barnett clutch was pretty straight forward good point on measuring runout on the crank I got lucky on my 96” vtwin runout was at .003 I did this all before I completed my stage 2 on the bike next thing I’m buying is that baker attitude adjuster tensioner just ran out of $$$$ after getting all the S$S Camchest parts
One of the coolest paint jobs was 86 Liberty
Man, I was all in until I saw the 4 to 6 week lead time :(
We do have a few sets in stock, but far fewer color options. Shoot us an email and we can see what options we have available.
Nah
Solid dudes right there! 👊
I’m running one on my clutch side, 2020 Ultra Limited, made a huge difference in clutch engagement being there is no adjustment on the hydraulic clutch !
The ac held it back
Peep the f/m hoodie 😎
This Video is RAD! Austin is the man, it was super rad to meet up and hang out for a bit.
Thank you guys for having me on. It was a pleasure to share some of the hardships and victories of the project up until this point. 🙏🏽
I have Oberons on my Street Bob. Can't start the bike in gear 😕
REMINDS ME OF.…AND JUST LIKE…THE "TWIN CAM" ISSUE OF TWENTY TWO YEARS AGO.
Could it be possible that a bad cush drive isolator could cause a final drive belt to break?
Will it work on Harley breakout 2017?
And much its going to cost,approx. $2,000😮
Without labor ?
Any timeframe when they will be available for the 2024 models?
Thank you very much. That was very informative. I am I understood it all perfectly. Did a great job.
Question if i may i followed all steps. Bike is working good but i keep getting CHECK ENGINE code PO330 and i cant seem to remove it. Once cleared it comes back. Bike works fine just code keeps coming back. Any guidance would be appreciated
P0330 code is for knock sensor issue. I would start with the connector on them.
Great install video!!plan on upgrading my system as well… what caught my eye was the chrome, crash bars, front and rear, where did you get those? I have the same bike but wicked red. I would love to get those crash bars!
We had the crash bars chromed when we had the frame done. They were just black Bung King crash bars.
So you gotta spend thousands to get the primary up to par on a basically new bike???
I have a 2023 Road King Special with 4,600 mi.’s. At what mileage should I consider installing these upgrades?
Thank you very much for this video!! Great job!
Wood grain and detox… great people!!!
Why do you prefer to grind the rivets instead of drill them?