Пікірлер

• 
  @audubonpointtownhouses5 күн бұрын

  My PL-5 turntable is now fixed thanks to your video and some Deoxit D5 sprayed in the pitch control pot. It means a lot to me because I got this turntable as a high school graduation gift in 1982 from my parents. Now all these years later, its running pitch perfect and I am passing it down to my son, who just graduated from law school and thinks it's cool. Thanks Jim!

• 
  @litzdog9114 күн бұрын

  Glad it helped. Enjoy!

• 
  @Notaslave196116 күн бұрын

  I am thinking that mounting on the side of the house in shade if possible, would help with connectivity to the phone app. Inside the metal of the air conditioner has to reduce signal...just thinking out loud.

• 
  @litzdog91116 күн бұрын

  I, too, was worried about the Bluetooth range when mounted inside the A/C. But it seems fine. I can access the device from about 20-ft away.

• 
  @charlesmiller790117 күн бұрын

  Man, that was painful to watch

• 
  @jointhejourney747219 күн бұрын

  You left out so many important details. Attaching the easy start, attaching the butt connector, reading the schematic to determine where the wires would be connected, etc.

• 
  @Eternyl_bliss-nj9se21 күн бұрын

  Found PL-7 at garage sale for $5. I find this video after struggling getting the turntable seperated ugh..... 3 out of 4 buttons didn't work... the stop start spring piece was broke so bent some excess wire out from it and got it functioning.... speeds and repeat doesn't change hitting buttons - thats next project.... putting it back together to test is annoying though ...

• 
  @litzdog91121 күн бұрын

  That's a great find! Hope you're able to restore it. It's a great turntable.

• 
  @Eternyl_bliss-nj9se21 күн бұрын

  @@litzdog911 Yeah I have stacks of turntables to fix - I need to learn how to restore these things. Unfortunatley they are rarely 'turn key' to flip. Using the money to get a Technics 1200 series. My old school personal table is a Bang & Olufsen

• 
  @user-qr9eo1wo8y27 күн бұрын

  5 years later...still only one on KZread that follows ESD procedures to include nitrile gloves that are conductive.

• 
  @prezzzrockАй бұрын

  Question for you. I installed my Micro Air Soft Start on my 5 ton about 3 weeks ago. The 5 ton unit is less than 3 years old so it's fairly new. In the heat of the day, I get a "Over Current" fault. It'll be 93+ degrees out when I get that fault. Micro Air says it may be a weak run capacitor...... But I doubt it being so new. They also tell me to have the soft starter to relearn in the heat of the day. That hasn't solved it. Have you ever experienced this with your unit?

• 
  @litzdog91128 күн бұрын

  Sorry, I have not encountered that issue with my setup.

• 
  @antonzvanut9542Ай бұрын

  Thank you very much! Your video encouraged me to (finaly) put in order the servo of my 40+ years old PL-320. Same problem, same solution. Most of the instructions fit PL-320 at 100%! Some of my friends will also be grateful because I need PL-320 to digitalise some vinyl records of their youth. As PL-320 seems to be mechanicaly simpler than PL-7 (less buttons), I neglected your instructions to properly set the arm moving mechanism. So, right now, my PL-320 preforms the arm retract but does not switch off. In fact it does, but than it switches on again... So, I'll have to redo the exercise.

• 
  @litzdog911Ай бұрын

  Glad it helped.

• 
  @antonzvanut9542Ай бұрын

  @@litzdog911 well, the mechanics disorder after the servo repair seems not to be a trivial challenge for myself. Could you please forward me the instructions you are mentioning in your video?

• 
  @antonzvanut9542Ай бұрын

  Got it by myself! In fact it is simple: with power off you perform a manually driven retract until final stage, when the handle lands on the hook. I missed that message following yout video yesterday, sorry. In fact, to do that you do not need to dissamble/reassemble anything. My PL - 320 TT is now completely back in the shape, as new!

• 
  @BladeAndradeАй бұрын

  I'd like to know what is the LRA on your AC unit's label so we can have an idea of how much reduction the micro-air is providing.

• 
  @litzdog911Ай бұрын

  Trane 4TTX6060, LRA=118A on the label.

• 
  @AudiophileStoogeАй бұрын

  very helpful. Thanks!

• 
  @williambray3996Ай бұрын

  I installed on my Trane 3.5 ton unit using this video. It runs great on my 13K watt generator now.

• 
  @litzdog911Ай бұрын

  Excellent!

• 
  @sjc4915Ай бұрын

  What model Trane unit?

• 
  @williambray3996Ай бұрын

  XL 15 i

• 
  @franciscopertierra768Ай бұрын

  Where did you order the parts it had been a pain

• 
  @litzdog911Ай бұрын

  www.repairclinic.com/Shop-For-Parts

• 
  @franciscopertierra768Ай бұрын

  Thanks a million

• 
  @user-hl4hx2iq7kАй бұрын

  What is control panel part number??

• 
  @litzdog911Ай бұрын

  Mentioned in the video description .... Electrolux/Frigidaire #5304500220.

• 
  @bryantjenks3598Ай бұрын

  I have the Trane XLi18 4TWX8 which looks very similar to yours. When I looked at the Trane electrical one-line it shows a variable speed fan, so the 240V is directly connected to the fan and then turned on by control wires. I am assuming yours is the same and doesn't cause a problem with switching on the fan first? I sent an email to Micro-Air and they said it shouldn't be an issue. But wanted to ask someone who might have installed it on the same type of CU.

• 
  @litzdog911Ай бұрын

  Yours is different. My A/C does not have a variable speed fan. It seems that there are several version of this A/C. But they're right, it should still work fine. The EasyStart helps with the compressor and doesn't do anything for the fan.

• 
  @bryantjenks3598Ай бұрын

  But doesn’t the micro-air start the fan first then the compressor?

• 
  @litzdog911Ай бұрын

  @@bryantjenks3598 Yes, but it doesn't change the default fan startup, only the compressor.

• 
  @mario7magАй бұрын

  Thank you so much!!

• 
  @joeretired4552Ай бұрын

  Very good video. Did you happen to check the amps on the Fan? I am curious to know what the fan amps are initially to allow deducting the fan amps from the Total amps prior to installing the Easy Start. That would provide the amps initially by the compressor to allow knowing what the Easy Start is doing with the compressor after installation. I am considering a similar installation for my Trane outdoor unit with Easy Start 368 Blue unit. Did you contact Trane and ask about using the Easy Start ? I want to know what they said if you did. Thanks for your video - now, what does Trane think of the Easy Start device???

• 
  @litzdog911Ай бұрын

  No, I did not contact Trane. My A/C was out of warranty, so it didn't seem necessary.

• 
  @joeretired4552Ай бұрын

  @@litzdog911 same as me. I was curious what trane people might have to say, if anything. Something like “absolutely go ahead and see how it goes.”

• 
  @GH-wt7ww2 ай бұрын

  Any issues with the Micro-Air EasyStart 368 Soft Starter (Model ASY-368-X72-BLUE) since posting the video? Really looking hard at the soft start for my 5 ton A/C. Great video thanks for posting.

• 
  @litzdog9112 ай бұрын

  No issues. It's working great. The app and Bluetooth connectivity make it easy to verify that it's doing its job.

• 
  @nhojcam2 ай бұрын

  actually, your before and after starting amps are better than you indicate. most ac's start at 80 to 100 amps, so your results are really pretty phenomenal. certainly, this amperage would be able to be started with a 50 amp generator no problem, even with the generator running other essential things on the circuit.

• 
  @phbrinsden2 ай бұрын

  My Trane 5 ton went from above 80 at start to 29.9 after 5 learning runs. Running at 13 amps.

• 
  @jeffdonofri80272 ай бұрын

  is there any expected reduction in the "running" amps?

• 
  @litzdog9112 ай бұрын

  Not really. Main benefit is reduction in the starting amperage.

• 
  @ddgardner56712 ай бұрын

  I have this problem. I bought a new switch, installed it, and the problem didn't go away. I used a wand type AC voltage detector to test the switch, and it didn't register. Do you have any idea what the problem could be? Thanks.

• 
  @litzdog9112 ай бұрын

  Not sure what you mean by a "wand type AC voltage detector". To test the switch you need an ohmmeter to see if the switch opens and closes properly. If the new switch tests out OK, then it's likely a control board problem.

• 
  @ddgardner56712 ай бұрын

  @@litzdog911 Thanks for responding. Do you know what the effect would be if the control board were removed? Would the temperature remain at the control board setting? I bought a replacement control board and an ohmmeter. I tested both the new and old switch, and they work properly. Long story short, I replaced the switch and the control board. The beeping and the erratic behavior of the light stopped for a few days, but now it's started again. Any ideas? They sure would be appreciated. Thank you.

• 
  @litzdog9112 ай бұрын

  @@ddgardner5671 That's very puzzling. I doubt that the freezer would operate at all without its control board. The fact that it worked for a few days and started again suggests a defective switch or control board. That can happen.

• 
  @ddgardner56712 ай бұрын

  @@litzdog911 Yes, very puzzling indeed. When I installed the new control board, I noticed that I didn't have to reset it. It automatically displayed the temperature setting I had set the old one to. That made me wonder if the freezer would still work if the control board were removed. After beeping for a few hours yesterday, it's currently not beeping, by the way. Again, Thanks.

• 
  @craigsmith83203 ай бұрын

  I must have a bad motor? When my PL-5 came to me it rotated counter-clockwise and when it would run clockwise (it doesn’t move in that direction at all at the moment), it looked like about 120RPM. I followed your steps but no change. Start button doesn’t work either. If anyone has ever brought one with these symptoms back to life I’d love to hear how. Thank you in advance, and than you for posting your video!

• 
  @casshern863 ай бұрын

  Easy understand, thank you.

• 
  @rvsteve5833 ай бұрын

  im out, to many words not enough wrench turnin................................

• 
  @mohavie23603 ай бұрын

  awesome video sir.. what is this app that you are using? pretty nifty

• 
  @Priaphomet6663 ай бұрын

  Muchas gracias por este video, una joya de KZread, ahora podré reparar mi Pioneer PL4. Saludos desde Colombia.

• 
  @vinnyvinny97943 ай бұрын

  Thank you for that video....... I have the same machine with the same problem now that I seen your video.... I fixed it my self... ... Thank You ..for helping...

• 
  @litzdog9113 ай бұрын

  Glad it helped!

• 
  @Mahan1503 ай бұрын

  Waste of time

• 
  @litzdog9113 ай бұрын

  Thanks for your opinion. I did not find it to be a waste of time and remain very happy with the sound quality.

• 
  @ThePerfectSeason19723 ай бұрын

  I really need some help with my DiecTV Dish. I have the older SD Dish and not the HiDefinition. I want to install it on a taller pole, because for three years, I’ve been getting letters some DIRECTV claiming that the satellite dish I am using is going to be obsolete because they have a 17-year-old satellite that’s going out. They want to install it on my roof through my shingles and all and I don’t want to do that. One of the problems I’m having is with trees and possible location of where to install a pole. The only reason why I had DIRECTV primarily was for the NFL SundayTicket, however, as some may know if not all, DIRECTV has lost it contract with the NFL to sell the programming. Can anyone give me any advice on how they would install the newer wider style type of DIRECTV satellite dish, or would you just simply go with a company like spectrum or AT&T on a wired line? Thank you very much for any advice or input

• 
  @litzdog9113 ай бұрын

  The Slimline HD dish doesn't require much more sky view than your old SD-only dish. The required satellites are very close together in the sky. If you don't want the dish installed on your roof they should be able to find a suitable location for a mount your siding or a pole in the ground. The nice thing is that the HD swap won't cost you anything, unless you upgrade other services. You'll get more answers if you post in the DirecTV support forum.

• 
  @aaronhansen7064 ай бұрын

  I had forgotten where some of the menu items were. They change slightly sometimes. My parent's area lost their only DTV service person (rural UT) and my senior citizen parents take care of my 100+ yr old grandma. They only care about CNN, MSNBC, ESPN and, all the local stations. Now I need to figure out which transponders their channels are on and go take a look to see which model dish they have

• 
  @ricklen4 ай бұрын

  What is the lenght of the belt?

• 
  @litzdog9114 ай бұрын

  I'm not sure. I bought a belt replacement kit from a seller on eBay. Search "Teac V-770 belt kit".

• 
  @gwingatetx4 ай бұрын

  Many videos say you just have to clean the igniter area but in my case a pre-igniter was indeed bad. Thanks

• 
  @Echris214 ай бұрын

  Hey thanks for this video. I just put my DA4ES back in service this weekend and was disappointed to find the left side surround channel was dead. :( I have the service manual and it looked like IC701, the power amp for the left side surround would be the culprit. After seeing how simple it is to remove the A-Class board in your video, I disassembled my entire setup and pulled the board. No obvious solder defects, even under a microscope, but I re-flowed all the joints anyway. Knowing that servicing that board would be a cinch pushed me over the top to just get it done, and it worked!

• 
  @litzdog9114 ай бұрын

  Excellent!

• 
  @doodleplays66114 ай бұрын

  How do you like the cooktop? Are the knobs on the right awkward since you have to reach over the pans/pots that are hot?

• 
  @litzdog9114 ай бұрын

  Love it! No issues with the knobs. Knobs can be easily adjusted without reaching over the burners.

• 
  @stevenfrazier89395 ай бұрын

  You could have bought the SeaFlo model 42 or 55 that does a much better job internally and is a fraction of the price. I have the model 42, 51, 52 and 55.

• 
  @emsaiii5 ай бұрын

  in your recap - you do NOT remove the black wire - you removed the screw and put the easy start black wire onto that same terminal, and re-inserted the screw.

• 
  @DS-fb9te3 ай бұрын

  He’s not a pro. 😏he’s a DIY😎

• 
  @elmarst37845 ай бұрын

  Thanks for the video - mods done and work good! Quite a tuner there. Any idea how to make the front window much brighter??

• 
  @litzdog9115 ай бұрын

  Thanks for the comments. The display is an integrated backlit unit, so I don't think there's a way to make it brighter. The remote provides 3 brightness levels, so the highest level is as bright as it will go.

• 
  @xri74375 ай бұрын

  Am so jealous of these as I dont have th skills to repair mine. My STR-VA777ES just went into protection mode after keep giving pops sound during start up. So sad.. 😥😥

• 
  @buddha71785 ай бұрын

  Thanks for the time you spent to make the video.

• 
  @Paufit6 ай бұрын

  maybe could have did trade in before 901s were discontinued..for $560.00 two new 901 series VI Ver. 2

• 
  @Anth40447 ай бұрын

  Just fixed mine today thanks to your video thank you so much you and one other guy really helped me posting these videos 👍👍👍

• 
  @litzdog9117 ай бұрын

  Glad it helped!

• 
  @Anth40447 ай бұрын

  @@litzdog911 Sure did!!!👍

• 
  @jmans0937 ай бұрын

  Have one of these to. It also takes it a couple of minutes for the display to fully come alive. Like the stereo though. Thanks for the video.

• 
  @litzdog9117 ай бұрын

  Glad to hear I'm not alone. Just wish that the replacement display modules weren't so expensive.

• 
  @iwilfix94077 ай бұрын

  Thank you for your instructions Just cleaned my speed controls and set the speeds and working beautifully. Also learned how to balance the tone arm, thanks again.

• 
  @litzdog9117 ай бұрын

  Glad to help. Enjoy!

• 
  @mickrat7 ай бұрын

  Thanks for looking into it. Saves me some time trying to fix mine.

• 
  @litzdog9117 ай бұрын

  Hope it helps. What's wrong with yours?

• 
  @mickrat7 ай бұрын

  Same thing. Very feint display. This is my second one. Forgot how the first one went bad but I didn’t save it and should have.

• 
  @litzdog9117 ай бұрын

  Seems to be a common issue with that LCD display module. I wish that the replacement was cheaper.

• 
  @pds41847 ай бұрын

  I hope you dont mind if I ask a question, I have a 5ton Carrie dual stage blower motor, did they say how to connect that by chance, Does your unit had dual stage motor?

• 
  @litzdog9117 ай бұрын

  No, my unit does not have a dual stage motor. But Micro-Air was very prompt in sending me wiring instructions, providing excellent support.

• 
  @raybelcher8 ай бұрын

  Thank your for this video.

• 
  @briancolorado64488 ай бұрын

  Hello what bolts do you loosen to dither the right side, as we cant see that angle of the video?

• 
  @litzdog9118 ай бұрын

  It doesn't matter. Just loosen the azimuth bolts and gently rock the dish from side to side until you can peak the 101, 99 and 103º readings. Leave the elevation bolts alone if you think you've peaked the elevation. It can take a bit of back & forth to peak all readings. Good luck.

• 
  @jameslaidler21528 ай бұрын

  Wretched design.

• 
  @litzdog9118 ай бұрын

  Mine worked great for nearly 15 years before the display became barely readable. It's not too hard to open up and work on, but the display is clearly a weak point. Many of the listings on eBay note that the display is defective.

• 
  @jeanphilippecarmin75208 ай бұрын

  Très bonne machine Teac...Tu peux peut-être m'aider, j'ai le canal droit qui ne fonctionne plus en enregistrement et quand je plaque un tournevis sur le rca droit à l'intérieur, je récupère un peu de son...Aurais-tu une idée ? Ca ne vient pas de la tête, elle est comme neuve.

• 
  @litzdog9118 ай бұрын

  Perhaps it is just a poor solder connection at that RCA jack? Try resoldering the connections at that jack.

• 
  @jeanphilippecarmin75208 ай бұрын

  No, i check it, i think it's on the pcb....but where ? I need to take lessons in electronics to detect faults myself. I don't think it's much of a breakdown, but it's blocking me, it's a shame, I've checked all the mechanic and she work very well. It's a robust deck but i have this litle problem.

• 
  @mr.boniato64028 ай бұрын

  Would adding this void the warranty if something happens to a brand new AC unit?

• 
  @litzdog9118 ай бұрын

  Great question. That's something you would need to ask your A/C manufacturer. Mine was no longer under warranty, so it wasn't a concern.