I tried your method and it works dvds are playing like a charm in drive!
@205KingWoolen6 ай бұрын
Why it need 2 grounds
@stevesmith149311 ай бұрын
I don’t see enough difference between what you had to justify that but whatever. Looks good
@stevesmith149311 ай бұрын
No liners?
@shawnfarand Жыл бұрын
Are the grounds just going to chassis?
@thrillbillyjp1 Жыл бұрын
Princible speaking u just sent a grounded signal to the dvd and u also sent a acc signal to the same place. U gave both
@thrillbillyjp1 Жыл бұрын
Ok Mr tech. So u just eliminated bated the remote wire that turns on the sun amp.
@tjl8884 Жыл бұрын
What about for alpine and the brake pedal wire? Just leave it off? Will your video work since alpine has that extra wire for brake pedal I believe.. And this is the dumbest safety feature every designed.. Just in case someone from these audio deck makers reads this, you're all idiots and thanks for making this bs 100x more of a pain that it already is.
87 groung coming off of the radio but the grey ground from where?
@juanarmendariz8488 Жыл бұрын
I did everything as in this video and the deck doesn’t even come on when I turn on ignition
@juanarmendariz8488 Жыл бұрын
Anyone know the size of the wire terminals
@bournebergeron3765 Жыл бұрын
I have an amp running off the blue accessory wire. Is this fine to pigtail off this wire still? I'm assuming any 12 volt constant with ign on would work.
@AGAVE26 Жыл бұрын
Totally perfect go ahead with that
@jimhibert Жыл бұрын
Why not just hook the wire to the parking brake?
@abacussin Жыл бұрын
Hello. I've tried this. i'm getting a click from the relay, it's wired as instructed, but there's still no sound when I install a cd to listen to . I'm fitting an Auna 7 inch radio multipurpose to a 2007 jeep wrangler. I'm getting sound when I play the radio but not cd and I'm presuming not bluetooth either but I haven't tried that yet. Any ideas??
@suntryp Жыл бұрын
legend! thanks
@AB-80X Жыл бұрын
Only for US models. Here in Europe and in the UK, you can still just splice the handbrake wire and ground.
@wmstone39142 жыл бұрын
I just grounded out the parking break wire to my Jensen CAR710W. Super easy and took 5 min for this normal non technical dude
@AB-80X Жыл бұрын
He fails to mention that this is only for the US versions. All other units can still just be grounded on the handbrake wire.
@blixiee49252 жыл бұрын
Y’all realize all you gotta do is ground your brake wire to the radio it’s self and you can watch movies while driving 😂
@ocdhd24112 жыл бұрын
Not with the newer radios. The car radio companies got smart and made it more difficult to just ground the parking brake wire.
@AB-80X Жыл бұрын
That does not work with the newer US versions of these radios. Here in the EU and everywhere else, you can still just ground it.
@danks2real3144 ай бұрын
dummy thought he was on to something a year ago 😂
@ANG19402 жыл бұрын
Thank you brother I am on the same boat right now and was stuck
@clphillips42 жыл бұрын
Looks good. How they holding up?
@ocdhd24112 жыл бұрын
so far so good. for the price they arent bad
@photog15292 жыл бұрын
I assume this will also let you access the setup menus without having to deal with the parking brake? I have an Alpine ILX-W650 in a 1995 Suburban and I'm not able to access the setup menus without doing an on-off-on with the parking brake which is a real PITA.
@AGAVE26 Жыл бұрын
Have the same radio where you able to try this?
@albertomadrid940 Жыл бұрын
@@AGAVE26this bypass will help you
@frankc14302 жыл бұрын
Will this modification disrupt the backup camera?
@AB-80X Жыл бұрын
No
@melvinsarucco75552 жыл бұрын
I have a 5pin toyota relay but the numbers are different. It has the numbers 1,2,3,4 and 5 in stead of 86 and 87. Will it work?
@ocdhd24112 жыл бұрын
I don't know...if u can switch the relay to a 5 pin 12v then just do that
@wikedlunatic10 Жыл бұрын
Yes 1=85 2=86 3=30 4=87a 5=87 So you put the remote wire on #85, second run 1 single ground to a 2 wire split and connect to #86 and #87, lastly you want to plug the green parking brake wire to #30.
@JMayhemMusic2 жыл бұрын
So, to be clear, you don’t need a 5 pin relay…
@AB-80X Жыл бұрын
No. You just need something that can switch the ground on and off. Some even just use a small toggle switch.
@saulDseer2 жыл бұрын
Question, My radio was working just fine… all the sudden I can no longer access the settings… it says car must be in park mode. Well my car unfortunately does not have a park mode. I’m wondering why this would stop working all the sudden. Any thoughts what it could be? I did adjust some switches on amplifier and also had a battery disconnect and reconnect but not sure why any of that would affect it. Thanks.
@AB-80X Жыл бұрын
The radios for the US have been built so that they sense whether the ground is broken on occasion, or on all the time. It basically needs to be "toggled". That's what the relay does.
@ducgia782 жыл бұрын
Hi I Just buy relay the same BUT install DVD JENSEN CAR8000same everything you show NOT WORKI !!! please help me Thanks
@chrispiltz8252 жыл бұрын
Usually on Jensen DVD players, just grind the parking brake wire and if that doesn't work. Hook up a toggle switch. One side to ground the other to the Jensen parking brake wire.
@nicknickelknocker11893 жыл бұрын
Is actually better to get a 4 pin relay(one without an 87a [which is really just a copy of 87]) as without it you are less likely to come across an unwanted short...
@MishAli103 жыл бұрын
I'm wanting to install a parking brake bypass on a stock ford stereo. However, when I located the green, black and blue wires I found there was either conduction shield or what I think may be called bare wire running alongside these three wires. Question is.. how do I deal with the bare wite when installing the parking brake bypass? Please excuse my verbage and terminology - I'm new to this. Thanks for your time.
@ocdhd24113 жыл бұрын
I'm alittle confused. you found a wire that didn't have any protective around it. just bare copper wire? definitely test that wire to see if its hot and try to see where it's going. if anything if it's bare wire take electrical tape or possibly heat shrink then zip tie it out of the way
@ocdhd24113 жыл бұрын
but if it's just a plain white wire coming from the radio harness it probably is a speaker wire I'm guessing.
@MishAli103 жыл бұрын
@@ocdhd2411 thanks for your help first of all. The blue and white wire, the green wire and the ground are wrapped up together and within that bundle is what looks like (excuse my verbage) aluminum or a silver color wire with no insulation around it...?
@ocdhd24113 жыл бұрын
@@MishAli10 I wouldn't worry about that wire. just out electrical tape around it. the only wires you need to find off the back of the radio is the parking brake wire, the ground wire and the remote wire.
@ocdhd24113 жыл бұрын
if you don't know what wires are what coming off the back of the radio that you are trying to install, give me the name and model number and I'll tell you what wires are which.
@uknowpablo3 жыл бұрын
Oh bro, thank you so much
@junioramon20133 жыл бұрын
What size relay does it have to be
@brassmunkey3 жыл бұрын
Straight to the point! Thank you
@garycooper7825 Жыл бұрын
What if your remote wire don't work on your pioneer 210
@darylrobert36733 жыл бұрын
you need the relay to switch off during engine startup that will break the ground connection and the radio will see it as a new connection to ground. You can use the positive wire (ignition key) from the starter motor to activate the relay.
@lornito223 жыл бұрын
Can I use 4 pin relay?
@ocdhd24113 жыл бұрын
Yes
@darylrobert36733 жыл бұрын
not sure if a normally closed 4 pin relay exists, it needs to be a five pin relay
@nicknickelknocker11893 жыл бұрын
It's actually preferable
@usa50464 жыл бұрын
My solution is free kzread.info/dash/bejne/ZaSTlbKOlNOXe9Y.html
@ACEDOGEMINEM4 жыл бұрын
Thank you. Oh I have a question can u hook up a toggle switch to the relay so u don't have to restart ur car every time?
@anything_under_the_sun914 жыл бұрын
Yes you can so run the parking brake to switch then run a wire from switch to your ground then you can flip the switch when it asks for your parking break to be on
@usa50464 жыл бұрын
My solution is free and it works for many brands including pioneer kzread.info/dash/bejne/ZaSTlbKOlNOXe9Y.html
@ocdhd24113 жыл бұрын
You don't have to use a toggle switch or restart the car every time. I had the radio on in the very beginning of the video to show you what the DVD screen says if you can't play videos with just the parking brake wire grounded. The only reason I turned the car off and then back on was to simply show you what the DVD screen will say and do once you install the 4/5 pin relay correctly. After you install the 4/5 pin relay, correctly, you only have to start the car like normal, and the DVD player will play movies every time without having to turn the car off and on numerous times...!
Пікірлер
I tried your method and it works dvds are playing like a charm in drive!
Why it need 2 grounds
I don’t see enough difference between what you had to justify that but whatever. Looks good
No liners?
Are the grounds just going to chassis?
Princible speaking u just sent a grounded signal to the dvd and u also sent a acc signal to the same place. U gave both
Ok Mr tech. So u just eliminated bated the remote wire that turns on the sun amp.
What about for alpine and the brake pedal wire? Just leave it off? Will your video work since alpine has that extra wire for brake pedal I believe.. And this is the dumbest safety feature every designed.. Just in case someone from these audio deck makers reads this, you're all idiots and thanks for making this bs 100x more of a pain that it already is.
But if your remote wire don't work on pioneer 210
Any 12v make it work
Plain and simple understading instructions. 5 pin 12v rely Pin 30 parking brake pin 85 Remote wire blue Pin 87 ground black Pin 86 ground grey Middle pin 87a leave blank
87 groung coming off of the radio but the grey ground from where?
I did everything as in this video and the deck doesn’t even come on when I turn on ignition
Anyone know the size of the wire terminals
I have an amp running off the blue accessory wire. Is this fine to pigtail off this wire still? I'm assuming any 12 volt constant with ign on would work.
Totally perfect go ahead with that
Why not just hook the wire to the parking brake?
Hello. I've tried this. i'm getting a click from the relay, it's wired as instructed, but there's still no sound when I install a cd to listen to . I'm fitting an Auna 7 inch radio multipurpose to a 2007 jeep wrangler. I'm getting sound when I play the radio but not cd and I'm presuming not bluetooth either but I haven't tried that yet. Any ideas??
legend! thanks
Only for US models. Here in Europe and in the UK, you can still just splice the handbrake wire and ground.
I just grounded out the parking break wire to my Jensen CAR710W. Super easy and took 5 min for this normal non technical dude
He fails to mention that this is only for the US versions. All other units can still just be grounded on the handbrake wire.
Y’all realize all you gotta do is ground your brake wire to the radio it’s self and you can watch movies while driving 😂
Not with the newer radios. The car radio companies got smart and made it more difficult to just ground the parking brake wire.
That does not work with the newer US versions of these radios. Here in the EU and everywhere else, you can still just ground it.
dummy thought he was on to something a year ago 😂
Thank you brother I am on the same boat right now and was stuck
Looks good. How they holding up?
so far so good. for the price they arent bad
I assume this will also let you access the setup menus without having to deal with the parking brake? I have an Alpine ILX-W650 in a 1995 Suburban and I'm not able to access the setup menus without doing an on-off-on with the parking brake which is a real PITA.
Have the same radio where you able to try this?
@@AGAVE26this bypass will help you
Will this modification disrupt the backup camera?
No
I have a 5pin toyota relay but the numbers are different. It has the numbers 1,2,3,4 and 5 in stead of 86 and 87. Will it work?
I don't know...if u can switch the relay to a 5 pin 12v then just do that
Yes 1=85 2=86 3=30 4=87a 5=87 So you put the remote wire on #85, second run 1 single ground to a 2 wire split and connect to #86 and #87, lastly you want to plug the green parking brake wire to #30.
So, to be clear, you don’t need a 5 pin relay…
No. You just need something that can switch the ground on and off. Some even just use a small toggle switch.
Question, My radio was working just fine… all the sudden I can no longer access the settings… it says car must be in park mode. Well my car unfortunately does not have a park mode. I’m wondering why this would stop working all the sudden. Any thoughts what it could be? I did adjust some switches on amplifier and also had a battery disconnect and reconnect but not sure why any of that would affect it. Thanks.
The radios for the US have been built so that they sense whether the ground is broken on occasion, or on all the time. It basically needs to be "toggled". That's what the relay does.
Hi I Just buy relay the same BUT install DVD JENSEN CAR8000same everything you show NOT WORKI !!! please help me Thanks
Usually on Jensen DVD players, just grind the parking brake wire and if that doesn't work. Hook up a toggle switch. One side to ground the other to the Jensen parking brake wire.
Is actually better to get a 4 pin relay(one without an 87a [which is really just a copy of 87]) as without it you are less likely to come across an unwanted short...
I'm wanting to install a parking brake bypass on a stock ford stereo. However, when I located the green, black and blue wires I found there was either conduction shield or what I think may be called bare wire running alongside these three wires. Question is.. how do I deal with the bare wite when installing the parking brake bypass? Please excuse my verbage and terminology - I'm new to this. Thanks for your time.
I'm alittle confused. you found a wire that didn't have any protective around it. just bare copper wire? definitely test that wire to see if its hot and try to see where it's going. if anything if it's bare wire take electrical tape or possibly heat shrink then zip tie it out of the way
but if it's just a plain white wire coming from the radio harness it probably is a speaker wire I'm guessing.
@@ocdhd2411 thanks for your help first of all. The blue and white wire, the green wire and the ground are wrapped up together and within that bundle is what looks like (excuse my verbage) aluminum or a silver color wire with no insulation around it...?
@@MishAli10 I wouldn't worry about that wire. just out electrical tape around it. the only wires you need to find off the back of the radio is the parking brake wire, the ground wire and the remote wire.
if you don't know what wires are what coming off the back of the radio that you are trying to install, give me the name and model number and I'll tell you what wires are which.
Oh bro, thank you so much
What size relay does it have to be
Straight to the point! Thank you
What if your remote wire don't work on your pioneer 210
you need the relay to switch off during engine startup that will break the ground connection and the radio will see it as a new connection to ground. You can use the positive wire (ignition key) from the starter motor to activate the relay.
Can I use 4 pin relay?
Yes
not sure if a normally closed 4 pin relay exists, it needs to be a five pin relay
It's actually preferable
My solution is free kzread.info/dash/bejne/ZaSTlbKOlNOXe9Y.html
Thank you. Oh I have a question can u hook up a toggle switch to the relay so u don't have to restart ur car every time?
Yes you can so run the parking brake to switch then run a wire from switch to your ground then you can flip the switch when it asks for your parking break to be on
My solution is free and it works for many brands including pioneer kzread.info/dash/bejne/ZaSTlbKOlNOXe9Y.html
You don't have to use a toggle switch or restart the car every time. I had the radio on in the very beginning of the video to show you what the DVD screen says if you can't play videos with just the parking brake wire grounded. The only reason I turned the car off and then back on was to simply show you what the DVD screen will say and do once you install the 4/5 pin relay correctly. After you install the 4/5 pin relay, correctly, you only have to start the car like normal, and the DVD player will play movies every time without having to turn the car off and on numerous times...!