Пікірлер

• 
  @twesigyeronaldk13 күн бұрын

  Idiotic sound effects

• 
  @michaelkoorey15 күн бұрын

  Perfect video - straight to the point and gives a great concise example.

• 
  @andrewp151328 күн бұрын

  Oh…it’s a whole diy process! Got it…thanks

• 
  @andrewp151328 күн бұрын

  Thanks. Just stumbled on this video after stumbling on the Rode headset holder thing. Great video thanks. Both mics sounded great. Nice low end from the big Shure capsule. Didn’t know you could go straight from the filmmaker into the iPhone. Picture looks great. Nice setup….thanks!

• 
  @Chris_Grossman28 күн бұрын

  To connect the filmmaker to the iphone i use a y adapter that splits the mic input and headphone output. The y adapter is plugged into the apple lightning to 3.5mm headphone adapter.

• 
  @andrewp151328 күн бұрын

  Thanks for the tip mate. Cheers from Adelaide, Australia

• 
  @andrewp151328 күн бұрын

  @@Chris_Grossman Can you tell me how you connect the shure to the rode transmitter please? What is the termination of your shure headset, and how do you adapt it to the Rode input? Cheers

• 
  @Chris_Grossman28 күн бұрын

  @@andrewp1513 I have another video on how I converted the Shure to work with the Rode.

• 
  @jinmatsuzaka29 күн бұрын

  thanks for great review can it be used alone? or it must connect to pc?

• 
  @Chris_Grossman29 күн бұрын

  You can plug the usb port into a wall wart for stand alone use.

• 
  @josefarodominguez2861Ай бұрын

  Un dac? Un saludo desde España

• 
  @josefarodominguez2861Ай бұрын

  Hola. Yo tengo un previo Dh110 y la etapa Dh 120. Sonido espectácular. Que es el aparato blanco con dos potenciómetros?

• 
  @tunamunchmunchАй бұрын

  Thanks for detailed instructions. I consider buying a headset mic for the similar reasons and I already have Rode Wireless Go. As for compatibility, I've seen info, that SM35 uses phantom power. So I guess this conversion will not work, at least tip-shaft variant.

• 
  @Chris_GrossmanАй бұрын

  There are two versions of the SM35; the phantom power version with an XLR connector, and a TQG (TA4F) version. The TQG (TA4F) version should work with this procedure.

• 
  @aechdot2310Ай бұрын

  Chris I need your help. Mine works fine with windows but I'm getting a weird noise /feedback when I use it with Mac. Any advice ? I have a 2013 imac and a mid 2009 imac same issue with both. Nasty feedback

• 
  @user-lb2fo7pd4hАй бұрын

  can i use it for my bass recording?

• 
  @SaiMiZАй бұрын

  Suppose we wanna add a switch to turn off direct monitoring , where would it be located ? Thanks 4 the video.

• 
  @Chris_GrossmanАй бұрын

  You would need to do that in your pc and set something besides the teyun as the output device.

• 
  @SaiMiZАй бұрын

  @@Chris_Grossman Actually there's no setting for that as it seems hardwired into the device , but thanks to your video I figured pin 39 MSEL (Mixer) if set to Low would turn off Direct monitoring , is that true ?

• 
  @harshitsinha98Ай бұрын

  I would be happy if you can make a video on how to connect Teyun Q-12 with V8 sound card🙏

• 
  @TesserIdАй бұрын

  Sorry, you're hands were obscuring what the first knot actually looked like. I was looking for the version involving what some call a lark's head. Been using it for years.

• 
  @TesserIdАй бұрын

  I figured it out. It's an interesting knot. Seems equally as fast, or more so, then the lark's head method. But, having looked at it, the lark's head method can be ratcheted tighter than a cable tie.

• 
  @davidvelozee24 күн бұрын

  Standards (IPC-620) calls for a clove hitch followed with a locking knot, like a square knot.

• 
  @TesserId24 күн бұрын

  @@davidvelozee Thank you for the spec. I've been looking these up. Yes, all of the aircraft specs I've looked up call for a clove hitch with either a reef knot or surgeons knot to lock it. The mil. spec. I found also allows a two-strand version for lacing with a larks head followed by however many marline hitches are need. But, then there's a finishing hitch that I haven't gotten the hang of. This two-strand method is the one most like what I learned in telephony wiring. Thanks again.

• 
  @davidvelozee24 күн бұрын

  @@TesserId I’m not sure what type of knot this is, it seems like 2 knots are getting “combined” to achieve the same thing. It is indeed very effective! I was having trouble with the standard method using 22AWG silicone wire, the “locking” knot kept getting undone! This knot seems to work better, though I’m not sure why! I did however add another half-hitch. And I like the solder cut. I couldn’t find what the other locking knot names were, so thank you for that info! For finishing up a long lacing run, it’s usually the same as the start; clove hitch and locking knot. But I’ll have to look it up…

• 
  @brokedownsupermanАй бұрын

  Wow! This review was fantastic!

• 
  @davidsanchezaraiza9889Ай бұрын

  Make the bomge u202 or the Lokchonk UX22HD!

• 
  @harshitsinha982 ай бұрын

  Excellent analysis

• 
  @SPBurt12 ай бұрын

  I wanted to like this unit but unfortunately it failed simple testing. I just wanted it to power a Dayton EMM-6 Condenser Mic for car audio tuning. I did not get consistent measurements with an RTA. Th mic would start out fine but the lower frequencies just dropped off. Couldn't explain it. I measured phantom power at 39vdc. I think that should be sufficient but maybe not. I know the mic is solid on another Behringer UMC22 that I borrowed.

• 
  @Chris_Grossman2 ай бұрын

  My measurements showed the phantom power was inadequate and essentially unusable, so it is not surprising you had problems.

• 
  @shadowfreedom39062 ай бұрын

  is it delay signal output or not?

• 
  @shadowfreedom39062 ай бұрын

  is it delay signal output?

• 
  @arceoemmanuel8402 ай бұрын

  this is really fantastic for the price i only paid 10$ for it and all i can say is worth every penny.

• 
  @fp4man5423 ай бұрын

  You mentioned a wish for the 3.5mm plugin power to be in the 5v to 10v range. Are there any devices which provide that much voltage? Most of the devices that I've tested are in the 3v to 5v range. My Behringer 302 mixer, provides about 4.5v, which seems to be enough for every electret mic that I've tried.

• 
  @Chris_Grossman3 ай бұрын

  Rode, Shure

• 
  @fp4man5423 ай бұрын

  ​@@Chris_Grossman It's a pity that the Teyun falls down on certain aspects of its performance. There aren't many USB mini mixers that offer two XLR inputs.

• 
  @hallucinogen49033 ай бұрын

  Hello Sir, I want to know if i use this mixer with my studio monitor speaker by using 2 trs cable and plugging it into the main output port of audio interface, Will it improve the audio output quality as compared to directly connecting it to the PC.

• 
  @AlexGrossGoss3 ай бұрын

  Thank you very much for such a detailed review, sir.

• 
  @ObscureMics3 ай бұрын

  Fantastic stuff!

• 
  @JaileneMichelle3 ай бұрын

  Thank you! The comparison was very helpful.

• 
  @Chris_Grossman3 ай бұрын

  You're welcome!

• 
  @yarnykh3 ай бұрын

  Thanks for your review. Would be possible to connect the mixer to DAC L/R Line out and Active Studio Monitor to use the mixer as volume controller?

• 
  @truecrimereaction3 ай бұрын

  We should build a dual xlr input for a computer.

• 
  @truecrimereaction3 ай бұрын

  You are pop pop popping non stop bro, p s and t maybe move it away a little from your direct mouth breath and spit. This is a neat instruction as I have a few $200 mini xlr head mics that would be fun to change.

• 
  @truecrimereaction3 ай бұрын

  Hi Chris could I bring my big analog mixer into the line inputs to go to computer, you can get rid of all the noise and breathing in on your voice over with the basic noise reduction on in obs, the expander and limiter is extremely good too.. 44.1khz is standard for my radio ads 48 is a bonus.

• 
  @Chris_Grossman3 ай бұрын

  It will work well with your analog mixer.

• 
  @paulsmith95743 ай бұрын

  Good review. I worked in electronics for 40 years. It would seem like a schematic of the thing could help to make some changes to the design to fix the shortcomings. Possibly add decoupling caps to the A2D section (Try to understand where the noise is coming from), add an external power connector, tweak a cap/resistor value or two, if that can be done, to give more gain. Beef up the step up voltage circuit to provide a higher voltage for the mic. This isn't rocket science.

• 
  @user-cv1yp8vk6z3 ай бұрын

  Used this in the Navy, then for a long time they wanted everything to switch to zipties. It has come full circle, everything is spot tie again

• 
  @rahulmascarenhas13703 ай бұрын

  Bro made a Goated review.

• 
  @KenTeel4 ай бұрын

  Once again, and excellent video with '"gettin' into the weeds" on components and functioins. This is a thoroughly enjoyable presentation for those with a tech background. Bravo !! Chris, I make a quick demonstration of what the Tenyu Q-12 sounds like with a dynamic mic (and some EQ and reverb) Here is the result. kzread.info/dash/bejne/k5ilxppslMi4Xbg.html

• 
  @KenTeel4 ай бұрын

  Bravo !!! Well done. You included some resistor values, information regarding differential pair (transistors built into, probably a standard IC), phase, etc., that you don't see a lot of times in reviews. You were very thorough in this review, and those of use with technical (electronics) backgroud, got out "tech fix" with this review. All that I can say is that you did and excellent job on this review. I, too, have this Q-12 (I'm always up for trying out audio products that are cheap and cheerful. I suspect that electronic tech are more prone to appreciating clever, useful economy products, and rely much less on evaluating products based soley on brand name.) If you're curious, I'll put a link to a guitar (Squier Sonic Strat with stock ceramic magnet neck pickup) and I'll put a link to the $15 BM800 Condenser Mic, too. These are not anaysis videos, they are just very short demonstrations of these products being used. Thank you for your wonderful video. Here are the links. kzread.infotJ2R0GJZ3vE And here is one for the BM800 Capacitor Mic. kzread.info/dash/bejne/X3ehw8ypgNiYZdY.html

• 
  @Odysseuss.4 ай бұрын

  You use lacing tape because it's cheaper.

• 
  @TarasMusicChannel4 ай бұрын

  Has anyone tried on a mac?

• 
  @TarasMusicChannel4 ай бұрын

  Excellent video! Thank you for making it :)

• 
  @gejzatamhleten97685 ай бұрын

  Would it make sense to replace one of the mic preamp UTC4580's by an AD712 - for lower noise?

• 
  @jeffrymanlutac5 ай бұрын

  I just got mine recently, and here are some of the pros and cons. If you want to use it as a usb connector for your recording, it does it's job really well, but since the design is simplistic and minimalistic and its only features are gain and volume control I would suggest to pair it with a multi-channel audio mixer or a soundcard that has vocal effects on it like reverb.

• 
  @TheDawinci5 ай бұрын

  Can you measure Elkos ESR at 100kHz with the VNA? It's out the same like a dedicated ESR meter?

• 
  @ajax0611595 ай бұрын

  HOW THE HELL DO YOU HOOK TO PC TO GET IT TO WORK. Plugged mine in.. and it does nothing.

• 
  @truecrimereaction3 ай бұрын

  Microphone and headphones input setting on computer

• 
  @justsomeguywholikespiano5 ай бұрын

  Is this audio interface always monitoring 2 inputs through headphone and main out ?

• 
  @Chris_Grossman5 ай бұрын

  yes

• 
  @ViniciusAraujoyoutube5 ай бұрын

  It would be nic eto see you shield the plastic case with aluminum foil and glue to mitigate EMI. I'll do this on mine.

• 
  @ChikiChpoki6 ай бұрын

  Thanks for the extremely detailed review and measurements! Is there some ways to improve Q-12? Will swapping resistors to 6.8 kOhm improve 48V phantom power? Please consider to do a video of fixing/upgrading the Teyun Q-12.

• 
  @annex66 ай бұрын

  I'm an intermediate guitarist just starting out with recording and making music. Will this suffice for that purpose?

• 
  @cjtcosjf6 ай бұрын

  Sir.. I need your help.. I bought my first elec-guitar... So, I bought Teyun Q-12.. But I cant find Driver.. and I cant use my guitar.. How did u can download Q12 driver? Plz.. Im from korea (Not north)

• 
  @cjtcosjf6 ай бұрын

  How can i use this Audio interface....

• 
  @Chris_Grossman6 ай бұрын

  The Teyun Q-12 does not need a driver. You need to isolate your problem. > Try a different USB port > Try a different USB cable > Try it on a different computer

• 
  @marcofrancis46146 ай бұрын

  Thank you for taking your time for making this 😊

• 
  @byronwatkins25656 ай бұрын

  10 V peak sine wave has power 1 W into 50 Ohm...

• 
  @Chasing-Wisdom6 ай бұрын

  Hi Chris, thanks for the great review, i have a noticed that little buzz noise in the background, is that something that can be fixed in post? I wanna get one for using it only for some talkhead videos. I am plannimg to use to for an XLR dynamic mic (fduce sl40- gain:-54db). Cheers

• 
  @ShaggyCrew877 ай бұрын

  Good review man!