i thought it comes with two different PCBs. is the difference between 6-switcher and 4 switcher? i recently shot two sixer from the uk. i have not tested nor opened them so far. i have one jr. with a few games as well that should work but not tested as well. lots to check. the goal would be to design new PCBs to pimp the shit out of it. pcb adapter boards for cpu, video, audio with more pins than the original chips need (24 address lines, 12 rgb out pins for the video board). address decoder for chip selects, one or more 256kB static ram chips. first cpu and video adapter PCBs for the original chips, so that the whole thing does not need much more than the original chips at the beginning. oszillator circuit on a small adapter board. one for PAL, one for NTSC. easy to change. two adapter boards, one for the NTSC and one PAL TIA. the chips are not pin compatible but the adapter board can be made pin compatible.
@rushtuningteam61476 күн бұрын
Where can I get this mod
@Shinxboi13 күн бұрын
I recently fixed mine but his upper and lower jaw don’t make good contact with the motors that move his mouth
@RinaMewna15 күн бұрын
Wow! That snes is so clean!
@lakerfan287419 күн бұрын
I bought a Sony Sports CD Walkman D-SJ15 with some corrosion on the contacts. I just used Isopropyl Alcohol to clean and wipe some or most of the corrosion off and used a tiny flathead to scrape some or a little bit off the contacts. It's worked ever since.
@fixedonretro388219 күн бұрын
That's awesome I'm glad you got it back in working order!
@domsanimationstudios24 күн бұрын
1:56 Devil Ruxpin 😂
@stingerfistАй бұрын
Amazing! my UMD door is similar, still intact but the left side is loose and doesn’t close cleanly, is a door replacement needed or maybe a clean of the spring / hinges, wondering if there’s anything to do without a full strip, Cheers
@fixedonretro3882Ай бұрын
Unfortunately in ordero to clean or replace the door part it must be stripped down.
@stingerfist29 күн бұрын
@@fixedonretro3882 Thanks mate, I will look to get it done once it completely falls off!
@AndyNewman95Ай бұрын
Why don’t you Weird Paul. Why don’t you Moonwalker. Why don’t you serious.
@ngoctoichau9918Ай бұрын
Everyone want to fix and repair now ?
@ngoctoichau9918Ай бұрын
Oh ,i forgot to tell everyone some question now
@ngoctoichau9918Ай бұрын
I will tell intro
@AndyNewman95Ай бұрын
You’ll be back with a new video?
@PhuongOanhNguyenThi-ml2kxАй бұрын
You just repair saga genesis about everyear now it is relaxing now 😊😊😊😊😊😊😊😊😊😊😊
@PhuongOanhNguyenThi-ml2kxАй бұрын
So you ,what is your favorite saga genesis,s game ?..oh my god it is was my favorite now hâhhahahahahahahaha! No way!😂😂😂😂😂😂😂😂😂😂
@PhuongOanhNguyenThi-ml2kxАй бұрын
Keeep in my way😅😅😅😅😅😅😅😅
@PhuongOanhNguyenThi-ml2kxАй бұрын
Perfect saga genesis model1❤❤❤❤❤❤❤❤❤❤
@hydetannen4819Ай бұрын
What did you clean the exterior of the console with?
@fixedonretro3882Ай бұрын
Just regular dish soap. And afterwards I wiped it down with a plastic protector.
@PhuongOanhNguyenThi-ml2kxАй бұрын
Just right ,but…………..but seen you can fix this game,fixed on retro😅😅😅😅😅😅😅😅
@PhuongOanhNguyenThi-ml2kxАй бұрын
Easy!!!!!!!You should want to clean the sega genesis model 1,2 and 3
@PhuongOanhNguyenThi-ml2kxАй бұрын
Why not, you just maybe it has been the most of sega genesis
@PhuongOanhNguyenThi-ml2kxАй бұрын
I just want to fix sega genesis cartridges sonic game with sega genesis! It was right to that my genesis model 1 was released in 1989 and genesis model 2 it was released in the 1993 now just don’t know what is released in this year now!sorry fixed on retro
@huynhnguyen6225Ай бұрын
my favorite game is vectorman many game cartidge
@huynhnguyen6225Ай бұрын
😮oh it is to fix this time in this genesis console system it is easily
@claracarneiro3830Ай бұрын
I’ve just found my daughter’s teddy in the attic. Player working fine. Glut eyes and mouth are t. Have watch a number of videos. Your is EXCELLENT! I am going to give it a go! Thanks!
@fixedonretro3882Ай бұрын
That's awesome to hear! If you haven't opened him up yet you can try having him on and playing a tape and gently massage his eyes and mouth to try and get the motors to unfreeze first.
@soullimboАй бұрын
Putting on "River Raid" at the end was the icing on the cake ;)
@fixedonretro3882Ай бұрын
That was my favorite game on the Atari!
@elijahnhmaАй бұрын
Pinch Roller Size?
@fixedonretro3882Ай бұрын
a.co/d/4GtZQnZ This is what I used.
@elijahnhmaАй бұрын
@@fixedonretro3882 thanks so much!
@BrianMills-uf2nnАй бұрын
maze craze
@jansonsynderАй бұрын
Just picked one up for 5 bucks today. Hope it's the same issue. No top stickers on mine. I'll make some new ones using Inkscape or gimp
@fixedonretro3882Ай бұрын
Yeah hope yours is also an easy fix, bring these beuties back to life.
@jansonsynderАй бұрын
@@fixedonretro3882 tested this afternoon and that's the problem! Time to clean it. Thanks for the video!
@Jonesjes07152 ай бұрын
Love the video. Is there a way to make the images on the screen darker? Mine has faded so much that I can barely see it anymore. Sound is great tho
@fixedonretro38822 ай бұрын
You could try replacing the polarizing film.
@Jonesjes07152 ай бұрын
@@fixedonretro3882 wow, thanks for the fast reply! I literally know nothing about these types of parts. Where would I get something like that?
@fixedonretro38822 ай бұрын
You can get sheets of polarizing fill from Amazon and you can cut the size you need. Also it has to be placed in a specific way in order for it to work properly.
Só com a introdução já me conquistou como inscrito
@fixedonretro38823 ай бұрын
Oh man thank you so much!
@Versatil-19803 ай бұрын
14:14 Le hace fala FLUX... :) - ¿De que año es este videojuego?
@fixedonretro38823 ай бұрын
1987.
@davidstrandberg52413 ай бұрын
Very cool!
@fixedonretro38823 ай бұрын
Glad you enjoyed
@Vefion3 ай бұрын
Ну и как не поставить лайк? Круто!:)
@fixedonretro38823 ай бұрын
Thank you, Im glad you enjoyed the video!
@ronaldhenson33793 ай бұрын
I have that super Nintendo entertainment system it has the lock tab and dedicated sound board and i also have the first generation Nintendo super famicom it has the same motherboard with the lock tab and dedicated sound board
@user-yc1qn6im5k3 ай бұрын
Idk why but when I have Teddy and Grubby plugged in, sometimes the speaker goes out. But when I take the cord out of Teddy and or Grubby, the speaker will come on. Other times it won’t. But if I turn Teddy off, then turn him on, his speaker will work. And when I turn his volume up, it’s very distorted and bassbooted. A previous third gen I had, his mouth and eyes moved fine with the uncle grubby tape and mushroom forest tape. But with the current third gen I have now, about 9 or 10 months ago, it would barely move his eyes and mouth to the tape. But he worked with other tapes. Now his eyes flutter about. What is wrong with my Teddy and or grubby and or cord? I’m not sure if they need a full on repair with everything replaced and resoldered.
@fixedonretro38823 ай бұрын
I can't give you an exact answer without toying around with it personally, sorry I can't be of any assistance.
@user-yc1qn6im5k3 ай бұрын
@@fixedonretro3882 okay
@user-yc1qn6im5k3 ай бұрын
Idk why but when I have Teddy and Grubby plugged in, sometimes the speaker goes out. But when I take the cord out of Teddy and or Grubby, the speaker will come on. Other times it won’t. But if I turn Teddy off, then turn him on, his speaker will work. And when I turn his volume up, it’s very distorted and bassbooted. A previous third gen I had, his mouth and eyes moved fine with the uncle grubby tape and mushroom forest tape. But with the current third gen I have now, about 9 or 10 months ago, it would barely move his eyes and mouth to the tape. But he worked with other tapes. Now his eyes flutter about. What is wrong with my Teddy and or grubby and or cord? I’m not sure if they need a full on repair with everything replaced and resoldered.
@ShinxboiАй бұрын
That is possibly an issue with the cord
@Rakuei3 ай бұрын
You made taking out the servos look so easy! I’m repairing mine, and the jaw doesn’t move, which I suspect is due to the motor being frozen. I’ve tried and tried to get that thing out, but it just won’t budge! Any tips?
@fixedonretro38823 ай бұрын
One thing I always try is while teddy is on and talking I very gently massage the non working piece and sometimes that gently motion will sometimes unfreeze the servo.
@Rakuei3 ай бұрын
@@fixedonretro3882 I can’t seem to get my fingers in between the plastic and the servo. It’s why I was trying to physically take it out of the head frame but I can’t get it out lol.
@silhouettoofaman29353 ай бұрын
Scalping aside, it's always a good sight to see these old toys get some much needed love and care. Especially toys as lovable as Teddy!
@fixedonretro38823 ай бұрын
Lol, yeah the scalping can look a little terrifying. However it must be done on certain situations to make these things back to their formal glory.
@silhouettoofaman29353 ай бұрын
@@fixedonretro3882 A necessary evil indeed. All in all, it's worth it to see him moving around again! Job well done 👍
@fixedonretro38823 ай бұрын
Thanks I'm glad you enjoyed it!
@goggles4083 ай бұрын
What’s the best isopropyl alcohol to clean boards with?
@fixedonretro38823 ай бұрын
The higher the percentage the quicker it dries.
@AsdDsa-cg4tm3 ай бұрын
I like you
@fixedonretro38823 ай бұрын
Thank you glad you enjoy my videos
@AsdDsa-cg4tm3 ай бұрын
I am from Saudi Arabia
@AsdDsa-cg4tm3 ай бұрын
❤❤❤❤❤
@AsdDsa-cg4tm3 ай бұрын
❤❤❤
@jettvasquez47273 ай бұрын
😭😭😭man ion think u had to be that delicate with the warranty sticker its already void
@fixedonretro38823 ай бұрын
Lol I know your right but I do love keeping everything as original as possible.
@jettvasquez47273 ай бұрын
@@fixedonretro3882 naw thats fair i like givin ppl shit for that🤣but its all good looks nicer w the warranty on it still at least in my opinion
@fixedonretro38823 ай бұрын
Yeah I'm that guy that likes things as original as.possible. Glad you enjoyed it long enough to give me crap about it 😁
@jettvasquez47273 ай бұрын
@@fixedonretro3882 ofc man keep on keepin on man💙love seein psps still gettin sum love after the released the new flop they call a psp😭
@dima-go3um4 ай бұрын
Это пиздец, все разъёмы по переломал , шлейфа по перегнул...
@zeel45504 ай бұрын
Did you use normal hydrogen peroxide or the type beauticians use?
@fixedonretro38824 ай бұрын
Just normal peroxide
@SparTan0274 ай бұрын
My psp 3000 won't turn on no after I removed my memory stick and i would like to fix it myself but I'm worried I might make it worse.
@wolfywillow88364 ай бұрын
Do you still have that Teddy Ruxpin? As I am interested to have your fully repaired one.
@fixedonretro38824 ай бұрын
Yes I do still have it because it's in my personal collection.
@yobrando12814 ай бұрын
Alot of work doing this. Thumbs up
@fixedonretro38824 ай бұрын
Thanks for the comment, glad you enjoyed!
@sigmawaveproductions5 ай бұрын
This is impressive work, man! I literally said “Wow!” out loud when I saw the before and after. I haven’t seen a clean SNES like that in forever 😂
Пікірлер
i thought it comes with two different PCBs. is the difference between 6-switcher and 4 switcher? i recently shot two sixer from the uk. i have not tested nor opened them so far. i have one jr. with a few games as well that should work but not tested as well. lots to check. the goal would be to design new PCBs to pimp the shit out of it. pcb adapter boards for cpu, video, audio with more pins than the original chips need (24 address lines, 12 rgb out pins for the video board). address decoder for chip selects, one or more 256kB static ram chips. first cpu and video adapter PCBs for the original chips, so that the whole thing does not need much more than the original chips at the beginning. oszillator circuit on a small adapter board. one for PAL, one for NTSC. easy to change. two adapter boards, one for the NTSC and one PAL TIA. the chips are not pin compatible but the adapter board can be made pin compatible.
Where can I get this mod
I recently fixed mine but his upper and lower jaw don’t make good contact with the motors that move his mouth
Wow! That snes is so clean!
I bought a Sony Sports CD Walkman D-SJ15 with some corrosion on the contacts. I just used Isopropyl Alcohol to clean and wipe some or most of the corrosion off and used a tiny flathead to scrape some or a little bit off the contacts. It's worked ever since.
That's awesome I'm glad you got it back in working order!
1:56 Devil Ruxpin 😂
Amazing! my UMD door is similar, still intact but the left side is loose and doesn’t close cleanly, is a door replacement needed or maybe a clean of the spring / hinges, wondering if there’s anything to do without a full strip, Cheers
Unfortunately in ordero to clean or replace the door part it must be stripped down.
@@fixedonretro3882 Thanks mate, I will look to get it done once it completely falls off!
Why don’t you Weird Paul. Why don’t you Moonwalker. Why don’t you serious.
Everyone want to fix and repair now ?
Oh ,i forgot to tell everyone some question now
I will tell intro
You’ll be back with a new video?
You just repair saga genesis about everyear now it is relaxing now 😊😊😊😊😊😊😊😊😊😊😊
So you ,what is your favorite saga genesis,s game ?..oh my god it is was my favorite now hâhhahahahahahahaha! No way!😂😂😂😂😂😂😂😂😂😂
Keeep in my way😅😅😅😅😅😅😅😅
Perfect saga genesis model1❤❤❤❤❤❤❤❤❤❤
What did you clean the exterior of the console with?
Just regular dish soap. And afterwards I wiped it down with a plastic protector.
Just right ,but…………..but seen you can fix this game,fixed on retro😅😅😅😅😅😅😅😅
Easy!!!!!!!You should want to clean the sega genesis model 1,2 and 3
Why not, you just maybe it has been the most of sega genesis
I just want to fix sega genesis cartridges sonic game with sega genesis! It was right to that my genesis model 1 was released in 1989 and genesis model 2 it was released in the 1993 now just don’t know what is released in this year now!sorry fixed on retro
my favorite game is vectorman many game cartidge
😮oh it is to fix this time in this genesis console system it is easily
I’ve just found my daughter’s teddy in the attic. Player working fine. Glut eyes and mouth are t. Have watch a number of videos. Your is EXCELLENT! I am going to give it a go! Thanks!
That's awesome to hear! If you haven't opened him up yet you can try having him on and playing a tape and gently massage his eyes and mouth to try and get the motors to unfreeze first.
Putting on "River Raid" at the end was the icing on the cake ;)
That was my favorite game on the Atari!
Pinch Roller Size?
a.co/d/4GtZQnZ This is what I used.
@@fixedonretro3882 thanks so much!
maze craze
Just picked one up for 5 bucks today. Hope it's the same issue. No top stickers on mine. I'll make some new ones using Inkscape or gimp
Yeah hope yours is also an easy fix, bring these beuties back to life.
@@fixedonretro3882 tested this afternoon and that's the problem! Time to clean it. Thanks for the video!
Love the video. Is there a way to make the images on the screen darker? Mine has faded so much that I can barely see it anymore. Sound is great tho
You could try replacing the polarizing film.
@@fixedonretro3882 wow, thanks for the fast reply! I literally know nothing about these types of parts. Where would I get something like that?
You can get sheets of polarizing fill from Amazon and you can cut the size you need. Also it has to be placed in a specific way in order for it to work properly.
@@fixedonretro3882 awesome! I’ll try ordering some. Thanks!
Very welcome
You can wet the front with the red LED on it ?
As long as you dry everything really well. But when cleaning make sure to use isopropyl alcohol
I want order the new shell can you put the link please
I purchased it off ebay
Hi there. Where you got the Mod PCB from ?`Do you have a parts list ?
vintagegamingandmore.com/product/atari-2600-pause-mod-kit-copy/
Where did you get the kit and LED?
vintagegamingandmore.com/product/atari-2600-pause-mod-kit-copy/
Só com a introdução já me conquistou como inscrito
Oh man thank you so much!
14:14 Le hace fala FLUX... :) - ¿De que año es este videojuego?
1987.
Very cool!
Glad you enjoyed
Ну и как не поставить лайк? Круто!:)
Thank you, Im glad you enjoyed the video!
I have that super Nintendo entertainment system it has the lock tab and dedicated sound board and i also have the first generation Nintendo super famicom it has the same motherboard with the lock tab and dedicated sound board
Idk why but when I have Teddy and Grubby plugged in, sometimes the speaker goes out. But when I take the cord out of Teddy and or Grubby, the speaker will come on. Other times it won’t. But if I turn Teddy off, then turn him on, his speaker will work. And when I turn his volume up, it’s very distorted and bassbooted. A previous third gen I had, his mouth and eyes moved fine with the uncle grubby tape and mushroom forest tape. But with the current third gen I have now, about 9 or 10 months ago, it would barely move his eyes and mouth to the tape. But he worked with other tapes. Now his eyes flutter about. What is wrong with my Teddy and or grubby and or cord? I’m not sure if they need a full on repair with everything replaced and resoldered.
I can't give you an exact answer without toying around with it personally, sorry I can't be of any assistance.
@@fixedonretro3882 okay
Idk why but when I have Teddy and Grubby plugged in, sometimes the speaker goes out. But when I take the cord out of Teddy and or Grubby, the speaker will come on. Other times it won’t. But if I turn Teddy off, then turn him on, his speaker will work. And when I turn his volume up, it’s very distorted and bassbooted. A previous third gen I had, his mouth and eyes moved fine with the uncle grubby tape and mushroom forest tape. But with the current third gen I have now, about 9 or 10 months ago, it would barely move his eyes and mouth to the tape. But he worked with other tapes. Now his eyes flutter about. What is wrong with my Teddy and or grubby and or cord? I’m not sure if they need a full on repair with everything replaced and resoldered.
That is possibly an issue with the cord
You made taking out the servos look so easy! I’m repairing mine, and the jaw doesn’t move, which I suspect is due to the motor being frozen. I’ve tried and tried to get that thing out, but it just won’t budge! Any tips?
One thing I always try is while teddy is on and talking I very gently massage the non working piece and sometimes that gently motion will sometimes unfreeze the servo.
@@fixedonretro3882 I can’t seem to get my fingers in between the plastic and the servo. It’s why I was trying to physically take it out of the head frame but I can’t get it out lol.
Scalping aside, it's always a good sight to see these old toys get some much needed love and care. Especially toys as lovable as Teddy!
Lol, yeah the scalping can look a little terrifying. However it must be done on certain situations to make these things back to their formal glory.
@@fixedonretro3882 A necessary evil indeed. All in all, it's worth it to see him moving around again! Job well done 👍
Thanks I'm glad you enjoyed it!
What’s the best isopropyl alcohol to clean boards with?
The higher the percentage the quicker it dries.
I like you
Thank you glad you enjoy my videos
I am from Saudi Arabia
❤❤❤❤❤
❤❤❤
😭😭😭man ion think u had to be that delicate with the warranty sticker its already void
Lol I know your right but I do love keeping everything as original as possible.
@@fixedonretro3882 naw thats fair i like givin ppl shit for that🤣but its all good looks nicer w the warranty on it still at least in my opinion
Yeah I'm that guy that likes things as original as.possible. Glad you enjoyed it long enough to give me crap about it 😁
@@fixedonretro3882 ofc man keep on keepin on man💙love seein psps still gettin sum love after the released the new flop they call a psp😭
Это пиздец, все разъёмы по переломал , шлейфа по перегнул...
Did you use normal hydrogen peroxide or the type beauticians use?
Just normal peroxide
My psp 3000 won't turn on no after I removed my memory stick and i would like to fix it myself but I'm worried I might make it worse.
Do you still have that Teddy Ruxpin? As I am interested to have your fully repaired one.
Yes I do still have it because it's in my personal collection.
Alot of work doing this. Thumbs up
Thanks for the comment, glad you enjoyed!
This is impressive work, man! I literally said “Wow!” out loud when I saw the before and after. I haven’t seen a clean SNES like that in forever 😂
That's awesome I'm glad you enjoyed the video!