Пікірлер

• 
  @freezepeach945414 сағат бұрын

  Editing may cut it down to 60 seconds, but that took you at least 15-20 minutes plus getting prepped for the dive. Still impressive amount of money in that time.

• 
  @SSPDIVING10 сағат бұрын

  Spot on brother, thank you🙏🏼🤙🏼

• 
  @Five_pc15 сағат бұрын

  What’s the baby soap for ?

• 
  @123hoodnig22 сағат бұрын

  Just found a big c clamp in the road the other day riding my bike 😂

• 
  @Joshsmity23 сағат бұрын

  are ferling drums rare?

• 
  @aecnzКүн бұрын

  No PropSpeed on the new prop

• 
  @SSPDIVINGКүн бұрын

  twin screw and neither had propspeed to begin with. owner supplied the spare. it helps up here but not critical

• 
  @Ryder415x4Күн бұрын

  We need the full video with no cuts then ill belive it but for now id say that took about 1 hr

• 
  @SSPDIVINGКүн бұрын

  @@Ryder415x4 lmfao how about you sub and I’ll post a short showing the video on my computer

• 
  @howey9352 күн бұрын

  My brother was a saturation diver from 1993 until 2001 and that’s a dangerous job. He worked in the North Sea at depths up to 500 feet deep servicing the offshore rigs. It’s not a job I could do I hate any open water and I wouldn’t even scuba dive let alone have to get in a pressurised diving bell then lowered to the bottom of the sea.

• 
  @Ben-gm6zi2 күн бұрын

  The odometer is the best functioning thing lol

• 
  @uberchipmonk25683 күн бұрын

  60 seconds my a$$

• 
  @michaelric35403 күн бұрын

  Dang I thought it was bad dropping a tool in an engine bay. Haha drop one here and it’s bye bye.

• 
  @SSPDIVING3 күн бұрын

  At least you can feel for it!! Freaking engine bay a 10mm will climb up into a place you can’t reach without pulling the engine!😂

• 
  @lesliemeller90973 күн бұрын

  Change the music!

• 
  @SSPDIVING3 күн бұрын

  I can’t, too late

• 
  @somenygaard3 күн бұрын

  I’m going to make a 5 second video clip on Jan 1 of me leaving my house for work and then add a clip of me coming home from work on December 31.

• 
  @SSPDIVING3 күн бұрын

  🤣🤣🤣 how to make a years salary in 5 seconds

• 
  @frederickgregg18813 күн бұрын

  “F”bomb totally unnecessary to make your point!

• 
  @mikalovergaard12543 күн бұрын

  You’re too soft

• 
  @SSPDIVING3 күн бұрын

  People say that a lot about David Goggins. STAY HARD!

• 
  @floridaripper8173 күн бұрын

  No doubt 😂😂😂

• 
  @SSPDIVING3 күн бұрын

  Definitely relatable 😂

• 
  @JonEnglish-dj3xi4 күн бұрын

  What is the name of that boat part

• 
  @SSPDIVING3 күн бұрын

  Furling

• 
  @thefinalgrind4 күн бұрын

  Gotta swim around for an hour finding cool shit because you already know where the part is&don't want to make it look too easy. Lol

• 
  @SSPDIVING3 күн бұрын

  Maybe 😂

• 
  @mohamedghaithmajjani85534 күн бұрын

  Is it a problem that nuts are put on under water? Any trapped water leading to rust?

• 
  @SSPDIVING3 күн бұрын

  Good question. Not rust necessarily since we are dealing with stainless steel shaft and bronze prop nuts.. the prop is a blend of nickel and bronze too. With these metals, you will see green or pink corrosion. But there are zincs (sacrificial anodes) installed on the scat to prevent corrosion. They can still get seized together tho.

• 
  @jurgenblick54914 күн бұрын

  Allot of zincs

• 
  @SSPDIVING4 күн бұрын

  Two for the shaft and prop, one to protect the strut. It’s pretty typical for sailboats.

• 
  @skippyguy34 күн бұрын

  Good use of the generic adjustable....😳

• 
  @SSPDIVING4 күн бұрын

  Indeed!

• 
  @T-Dawg9284 күн бұрын

  If you rub your mask with a towel to slightly warm up the glass pores before putting the soap on, it makes the mask not fog up as soon

• 
  @SSPDIVING4 күн бұрын

  I’ll have to try that

• 
  @ipodman19104 күн бұрын

  If you think you’re kidding anybody it took only 60 seconds - you’re more naive than you think we are!!!

• 
  @SSPDIVING4 күн бұрын

  Okay, you caught me

• 
  @Gihad_Joe695 күн бұрын

  BBL DRIZZY

• 
  @SSPDIVING4 күн бұрын

  Damn right

• 
  @jishan69925 күн бұрын

  Yeah sure that took 60 seconds

• 
  @kingfiremonster79165 күн бұрын

  Underwater Mechanic?

• 
  @SSPDIVING4 күн бұрын

  Pretty much!!!

• 
  @westonhorn86975 күн бұрын

  You had cuts in you 60 second video i believe the title is misleading

• 
  @SSPDIVING4 күн бұрын

  Sorry about that

• 
  @cinnamonrollies5 күн бұрын

  60 seconds huh?

• 
  @brs6905 күн бұрын

  Who else thought it was going to be a gun?

• 
  @SSPDIVING4 күн бұрын

  Can’t wait for that day!

• 
  @michaelryan77155 күн бұрын

  Step 12 go to diving school to be a master diver so you can do extended dives

• 
  @SSPDIVING5 күн бұрын

  lol unlimited bottom time

• 
  @dagieu-js3ns6 күн бұрын

  Whats the baby shampoo for?

• 
  @SSPDIVING4 күн бұрын

  De fog

• 
  @0Wheezy6 күн бұрын

  Break out another thousand b.o.a.t

• 
  @SSPDIVING5 күн бұрын

  You got it ✅

• 
  @mattfredrickson21546 күн бұрын

  All that trash on the sea floor, humans are the worst -- A Fish

• 
  @SSPDIVING6 күн бұрын

  @@mattfredrickson2154 help us organize or sponsor a clean up

• 
  @james107397 күн бұрын

  So you made 1k from the video because i bet that took like 10 minutes assume we are not counting anything but what we aee

• 
  @SSPDIVING4 күн бұрын

  Exactly

• 
  @spacekeebeats31557 күн бұрын

  How many rusted tools you have ? And if not any what the fuck are the tips @?

• 
  @SSPDIVING7 күн бұрын

  I have lots! Everything rusting eventually, ratchets are my arch nemesis. WD-40 moving parts. Get higher quality tools, stainless when possible, rise after every dive. But harbor freight for things like pliers that will get seized up anyway. Use lifetime warranty. Higher quality steel lasts much longer tho, just rinse, wd40 and wire brush.

• 
  @spacekeebeats31557 күн бұрын

  @@SSPDIVING sheesh man I highly appreciated the reply , ima take it to consideration before purchasing tools

• 
  @SSPDIVING7 күн бұрын

  Honestly ratchets doesn’t really matter what brand. Less moving parts or bigger moving parts the better. Quality matters, maintenance too. Freshwater rise and Idk if you’ve seen them but those handheld blowers… I might get one to dry gear off after I throw everything in the truck. Feel free if you have any other questions bro.

• 
  @Gerlingsbulldogges7 күн бұрын

  🎉❤🎉

• 
  @SSPDIVING4 күн бұрын

  💃🏻

• 
  @Honeybun_pyro5627 күн бұрын

  Why did you put that stuff on the madk

• 
  @SSPDIVING4 күн бұрын

  Baby shampoo

• 
  @bravobullz74757 күн бұрын

  60 seconds my Ass

• 
  @JeffWonderin8 күн бұрын

  60 seconds my booty!

• 
  @AceWolff8 күн бұрын

  I think you mean 60 minutes

• 
  @SSPDIVING4 күн бұрын

  30 minutes

• 
  @jacobb76089 күн бұрын

  Liked for the song choice :)

• 
  @SSPDIVING9 күн бұрын

  @@jacobb7608 appreciate that big dog💪🏼

• 
  @Motoxlight9 күн бұрын

  Good information 👍

• 
  @SSPDIVING5 күн бұрын

  Thank you brotha

• 
  @Motoxlight5 күн бұрын

  @@SSPDIVING 🤙

• 
  @FlatBroke6129 күн бұрын

  Watch on mute, mumble jungle rap...

• 
  @SSPDIVING9 күн бұрын

  Jungle rap? Your username says it all… flat broke.

• 
  @alexanderpotterton87789 күн бұрын

  How much you charge? That sender/float couldn't be more then like 65$

• 
  @SSPDIVING9 күн бұрын

  $350. They don’t make the exact part and he didn’t want to mess around retro fitting a new one in there

• 
  @alexanderpotterton87789 күн бұрын

  @@SSPDIVING hell yeah man! Shiiiiiiit im in the wrong trade, If your ever hiring lmk🤣🤣

• 
  @shinrakishitani10799 күн бұрын

  I would if I wasn't so worried about what's below me

• 
  @SSPDIVING9 күн бұрын

  @@shinrakishitani1079 just don’t look down and think happy thoughts haha

• 
  @Cmac9-ch2fc10 күн бұрын

  Drop Bolt s***

• 
  @SSPDIVING10 күн бұрын

  @@Cmac9-ch2fc worst feeling in the world

• 
  @jozyphilyaw933911 күн бұрын

  Bro i 💯 can do this ill start out at 70% and you just take you lick off the top i got all my own tool and own a construction and plumbing company

• 
  @SSPDIVING10 күн бұрын

  Send me an email fam [email protected]

• 
  @chief1421111 күн бұрын

  Im just curious how many tools have you dropped/lost or is it possible to just swim down and get them?

• 
  @SSPDIVING11 күн бұрын

  Yeah man I drop stuff every now and then. When I’m in shallow water just working on docks and stuff it’s more common. Less common when I’m working on boats. As long as it’s not too deep, not as issue. It becomes a problem when it’s like 40+ feet deep because I don’t have a reference line so I’m hoping I went straight down but not always the case.

• 
  @dipgrizzly2511 күн бұрын

  Took more than 60 seconds just to get your gear on...

• 
  @SSPDIVING11 күн бұрын

  I’m sayin

• 
  @Thearmchairbiologist2811 күн бұрын

  you coulda picked any song, why a drake song

• 
  @SSPDIVING11 күн бұрын

  I used Kendrick the last few songs and people hated it😔

• 
  @BLUE-wk8wh11 күн бұрын

  Liar 🤥

• 
  @SSPDIVING11 күн бұрын

  😔

• 
  @BLUE-wk8wh11 күн бұрын

  @@SSPDIVING how to make 800$ in less than 1 minute.. that is lying my dude, you might have cut a video that is less than one minute.. but I bet it takes you more than one minute just to put your gloves on ✌️😂👎

• 
  @SSPDIVING11 күн бұрын

  😭😢

• 
  @BLUE-wk8wh11 күн бұрын

  @@SSPDIVING you Seem like a smart man 😂😂😂

• 
  @SSPDIVING11 күн бұрын

  Likewise bro, sorry man. Had to use some word play for the algorithm, forgive me.

• 
  @jimandskittum12 күн бұрын

  "with the cork sitting up in the air?" Uhhh...nope.

• 
  @SSPDIVING12 күн бұрын

  Lmao up in the water column