Bonjour à toi,
À travers cette chaîne KZread, je te mets à disposition un tutoriel afin de régler les différents problèmes de jeu que l'on peut rencontre sur les trottinettes Ninebot (es1, es2, es3, es4).
L'outil que je te propose est réalisé à la main durant mon temps libre. Il te permettra de dévisser la vis de l'axe maintenant la roue avant pour accéder à l'axe ou se trouve les roulements et ainsi entretenir ta trottinette ninebot !
Pour t'en procurer un, ça se passe sur EBAY !
www.ebay.fr/itm/203137419507
35€ frais de livraison inclus, livraison lettre suivie 48H ! Stocks limités !
Пікірлер
the item says currently unavailable so i cant buy it on amazon
Thank you it helped 🙏
nice job on vid
Hi What bearing set do i need for my e25e? Thanks
What about the E22D model it is not the same
Mon fils a le même problème mais c'est une trottinette pure air, quelqu'un peut m'aider pour le résoudre svp??? Merci d'avance je suis mère célibataire et c'est pas simple pour moi 😩!!! Merci infiniment et d'avance pour votre aide !!!!👍🙏🤗
Great video. Thanks a lot monsieur
Bonjour, j'ai un gros problème sur ma e45 segway, quand je roule sur une surface qui n'est pas lisse je ressens chaque bosse ou chaque trou dans tous mon corps ca tremble comme si c'était une petite trotinette pour enfants, je ne sais pas si c'est parceque ce scooter est trop léger ou si c'est parce qu'il est mal vissée quelque part, le seul endroit qui semble être mal vissé est au niveau de l'appuie qui sert à repliée le scooter le guidon n'est pas stable il bouge en avant quand je m'appui dessus, de plus le capot sur la roue arrière ne tient sur rien du coup ca fait des claquement fort chaque fois que le scooter tremble en roulant sur une route qui n'est pas lisse, Avez-vous une solution svp ?
What is the size of nut and bearing sir?
Bonjour moi j’ai un problème quand je roule sa ne va pas à fond. Je fais 20-18 20-19 sa ralenti un peu à chaque fois . Avez vous une solution ou c dans la vidéo ?
Bonjour, ne serait-ce pas un problème de batterie ?
@@yourfrenchtools7807 comment je peux le savoir ?
@@yourfrenchtools7807 car je vous explique un peut mon contexte , on me l’a offert mais une journée après je m’était cassé le bras donc je n’ai pas pus la conduire pendant un bon 4 mois , est-ce pour ça qu’elle a du mal ?ou aussi non je vais au travail avec et je prend souvent de nuit donc elle est dehors , serait-ce le froid qui l’a abîmé ?
Mais c'est super compliqué, il faut tout démonter ! Il n'y a pas un moyen plus simple de resserrer la potence ?
Bonjour j'ai fait au mieux pour simplifier les différentes étapes, vous avez toutes les étapes pour réaliser cette opération. De plus, en commandant l'outil, vous recevrez une notice papier de démontage en 8 étapes !
Where is key long only shopping
regarding to special tool size is the outer diameter of the tube is from 22 to 24 MM, and the diameter of the tip nut is 18 mm.
5:55 you are aware of the fact that the you are not greesing anything on the modél e? 😂😂😂
You should have greased both bearings not lubricant them, lubricant is sort of a liquid to help reduce rust and keep out moisture grease on the other hand let’s the bearings roll around and helps maintains the bearings life span from Keeps Particles from getting in and wearing them down
MERCIIIII
for oiling use VASELINE! not WD40... pls.. and use threadlocker is need to use.. for 200%.. next.,. this scooter project soem imbcil.. 9 screew wto remove one sindle wire you f.kin kiding me..
Bonjour Merci pour la vidéo je doit changer le roulement d'en haut comment faire pour enlever vous avez dit qu'on ne pouvais pas mais comment puis je faire alors
Anch'io ho un gioco del manubrio in avanti e dietro, quindi sicuramente dici che si sono semplicemente allentati i due dadi n36 sotto?
bon jour il me reste un joint rond en caoutchouc je sais pas ou il va merci
Superbe vidéo, tu sais nous dire combien de millimètre fait la tête de l'écrou hexagonale pour le modèle e25e ? Merci.
Does this work for the es4-800 model? It is nonfolding.
Hello, I'm not too familiar with this scooter. If you take out the tube, you should see a toothed bolt which you can use for taking out and repairing the steering axle. Clement.
Hi just like to know what size castle nut thats is and the tool you made what diameter was the tube?.Thanks
Узнал ? И какой же
Hi, how many millimeters is nut on e25 tool? I'll make this tool by myself, but I need to know how big nut I have to weld.
I was wondering the same thing, but it's unlikely they will tell you as, quite reasonably, they want to sell tools. I was thinking of just putting different nut sizes down there and seeing if they fit, then retrieving them with a magnet but no guarantee that will work. Otherwise I'm going to try and find a detailed part list for the scooter somewhere and get the info that way.
@@vasvizsla Cool, thanks for that. I have been experimenting today, with a few trips the hardware store in-between, and have managed to fit an M10 nut in there (with some play) so its not perfect. I have an M12 bolt to try as well but I Have a feeling that will be too big, we will see tomorrow. My suspicion is that its an Imperial fitting, maybe 7/16" imperial size nut or around there as it would be the in-between equivalent of the M10 and M12 bolt (couldn't find an M11, I'm not even sure there is one!) Something I didn't mention is that I had to drill out the centre of the nut, removing it's threads completely to make enough room to get all the cables through, the cables, in my opinion, are the real pain in the butt in all of this! The negate the use of Box Spanners, as all the cables wont fit inside of it, from my experience anyway. So essay over, but we are making some progress I'd say, for the DIYers, I'll post here again if I get more success later on.
@@vasvizsla Good to hear your research has been going well too :) I have some info to share as well that you might be interested in. So I think we are right, I think the 18mm spanner size (thanks for that term, it gets confusing) is the right one, I messed with the 7/16" (17.46mm) size, which actually yielded decent results, there is a little play but it works. The first reason I stuck with it is, as we both discovered, M11 isn't really a thing, check out McMaster Carr and you hardly find a thing for it, at least not the conventual nut we are looking for. Second reason being I decided to try 3D printing, just to give it a go. So I designed a bit that would glue onto a hollow aluminium pole (18mm inner diameter 20mm outer). Printed it, glued it, let it dry for half a day and drilled two holed in the top for a bar to go through so I could twist with some torque.... Guess which broke first? The aluminium pole tore were the two holes and bar were, tore straight through! The print, on the other hand, showed some minor marks. Really I was quite surprised. So today I picked up a steel pole (17mm inner 20mm outer) bit tougher, redesigned the printed part am gluing it as we speak. We will see what happens, I'll give you an update when I know more. ps. Nice chatting about this 🙂
@@vasvizsla Jealous you have a welder! Tell me how it goes when you get it done, but yeah hopefully we are on the right track towards fixing our scooters. cheers!
@@vasvizsla Great news! It sounds like we have the same outcome, but reached it in different ways. I also have the small residual wobble but, like you, its way way better than before. About that movement, I noticed that the bearings themselves had a little movement (mine were the sealed kind, hard to grease) not much but a little. And on top of that I noticed that the hex shaped bar that slides into the main body (the bit that is attached to the wheel and moves up and down with the spring) has a bit of play. resulting in slight movement in the wheel itself but does not translate to the handle bar. In case you are interested, as I don't have access to a welder or even the ability to braze. So I decided to make my own tool by glueing a nut, about the same size as yours, to the end of a 1/2 inch plumbing pipe, found at the local hardware store, and filed down the pipe using the glued on nut as my guide. Got it to the rough shape, removed the guide nut and it worked, believe it or not! I did put some locktight on the loose nuts when I reassembled so I really hope that increases the amount of time I need to do this again! Anyway, thanks for the update and happy riding! ps. really need an extra battery for it though.
Bravo,et merci pour votre travail.
Merci le frérot pour la vidéo 👍
Exelente explicación
😊😊
6:56 6:56 😊
What do you do if the scooter cannot fold? I have an es4 that is unable to fold and I cannot reach the 2 screws
Hello, you never fold your scooter? Did you fixed it ?
Jai achete se model de cle mauvaise qualite et trop cher a ete abime dans la premier utilise
Bonjour, Je ne trouve aucune commande qui se rapprocherait de votre nom Merci de me contacter par mail afin que j'examine l'incident qui s'est produit avec votre commande Nous trouverons ensuite une solution à ce litige
Good, informative video. Thank you. Is it possible to use a box spanner instead of the special tool for the E25E?
Hello, thank's ! Due to the câble, you can't use a box splanner
Take his word for it, It doesn't work, like he said, the cables get in the way. Shame as it would be an easy fix!
Complementi veramente e utile... una Domanda ho presso E45E. La sospensione sbattere tropo e nuova appena aperta avrebbe modo da sostituire con un altra? Grazie
фиксатор резьбы лучше в данном случае использовать синий а не красный. спасибо за видео. многим это сэкономит время и нервы )
Hello, in my case, the thread locker is red but not as hard as the official red by loctite
@@yourfrenchtools7807 hi! got that. when repairing a motorcycle fork, I encountered a problem associated with a red retainer. I had to warm the hairdryer to unscrew the bolt (400 degrees Celsius).
@@yourfrenchtools7807 my bottom backlight is off. you don't know what it might be?
Thnak you very much for creating this video, it's the best tutorial that I could find
I really appreciate your comment, thank you !
I need tools
Hello, You can find the links here : Ebay www.ebay.fr/itm/203859338345 Amazon www.amazon.fr/dp/B09XVM2X1R If you want a discount, contact me at [email protected] Regards, Clément
Ne faites pas ça .
Pourriez-vous être plus précis ?
because the wall of the stem is so thin and aluminum by putting a bigger bolt with a wider thread it is hardly fixing to the stem wall, what I have done and seems very solid, ( I have drilled 6mm straight one side to the other of stem and bar holder, then bolted all the way through and to make the bolts useful I used bolts with a bent loop head, not hex, 2 nuts the other side the last locks the first solid) I've had the stem snap and the one from the deck to stem snap, used scooters, people tend to hang on to the handle bars for life, in my opinion and I am a true old school ELECTRIC SCOOTER LOVER FOR NEARLY 20 YEARS,, I am a 57 young mechanical engineer that has RAZOR E300, &E300S wide wheel, Aovo pro, Wind-Goo M12, Electriq , Jungle one, Hover X1 Eagle, 2 razor e100, one I'm making from BMX scooter with a kids 14inch mountain bike monoshock sprung back end and wheel, spares from all sorts, a tricycle imtrying to electrify and a range of motors wheelchair, tool washing machine etc I will get or make a dual hub fast scooter, RION OR WEPED MIND so many great scoots now RAZOR was it back then but great custom point to build from, I had one doing wheelies using 2 18v tool batteries direct to motor with a drill trigger, I don't think the early e300 motor had a volt rating, it melted thick wire and switches but motor was ok, put E100 sprocket on the E300 with shoulder bolts in the 4 slots, aovo does 28mph, great fun
Hello, Thank's for your comment ! This video is aimed at a large audience that does not have the tools/skills to modify their scooters The first solution usually does the job for most people
@@yourfrenchtools7807 IT IS A LOT EASIER THAN THIS WAY, YOU ARE TELLING PEOPLE TO REMOVE THE 4 STEM SCREWS ON YOUR VIDEO, AL THAT IS NEEDED IS A 6MM HSS DRILL BIT AND M6 BOLTS THAT GO ALL THE WAY FROM ONE SIDE TO THE OTHER AND 2 NUTS EACH BOLT ONE ACTING AS A LOCK NUT, DRILL HOLES TO 6MM AND POST BOLT TIGHTEN, PUT TOOLS AWAY AND GO FOR A SAFE RIDE, IT IS ALUMINIUM SO THESE SCREWS THAT ARE USED ARE NOT THE BEST, GOING BIGGER WITH A BOLT MAKES IT WEAKER LESS THREAD TO GRIP, A THIN FLAT BAR ACTING LIKE YOUR TOOL AND GRIPS WILL SAVE HAVING TOGET A SPECIAL TOOL
@@1Saltyone Not everyone is able to pierce their scooter, and this is not the only problem with the play in the stem
do you have a photo of the stem to share?
Great video! Our son had crashed (he's ok) and the steering got out of alignment. This video shows how to take the front headset apart so we could realign it. Because it was out of alignment - it was quite a bit of work to get al the parts out - once we cot the castlenut out, we had to use a sledgehammer banging on the castlenut wrench (shown in this video - to get it all disassembled as it was all wedged in the front headset. Be sure to put the wheel back on the correct way (we had it backwards) otherwise you'll spend lots of time trying to figure out why it's not working!
Hello, Thank you for your comment ! Glad you were able to fix your scooter
Ninebot has bad solution when fold the scooter very bad that is not hold god and when is off you mey fall
Exactly, unfortunately I don't work for them
@@yourfrenchtools7807 just saying
merci bcp tres tres bonne video
Merci beaucoup pour votre commentaire, j'ai récemment sorti une nouvelle vidéo plus claire et précise sur cette même chaîne KZread qui devrait vous intéresser
Grazie a te ho aggiustato perfettamente il mio es4! Mercì
Sono lieto di sapere che questo video vi ha aiutato
Hi. Erst Mal Danke für das Video. Sehr interessant. Ich habe gleiche Problem bei gleicher Roller. Wo kann ich den Schlüssel bestellen und was wird es kostet mit der Lieferung nach Deutschland? Danke für Antwort
Hallo, Sie können mir direkt eine E-Mail schicken an: [email protected] Ich biete die Versandkosten für Kunden an, die das Tool direkt bei mir kaufen. Die Versandkosten für Länder außerhalb Frankreichs betragen 13€. Mit freundlichen Grüßen, Clément
Grazie!
Prego !
Bonjour Merci pour la vidéo ca m'as vraiment aidé j'ai un question quand je conduis ma es4 j'entend beaucoup de bruit a l'avant même si tous semble bien serré pouvez vous m'aider s'il vous plait?
Bonjour ça peut venir de plusieurs choses mais généralement c'est l'amortisseur avant qui fait beaucoup de bruit. Il faut essayer de le bloquer
Muy bueno saludos desde Perú me llego preciso
Muchas gracias por su comentario !
Bonjour j'ai perdu mon chargeur comment changer
Bonjour, Vous pouvez le trouver pour une dizaine d'euros sur Ebay ou Amazon
Bonjour j ai chargeur d origine à vendre si jamais
Thank's for your video and tool, I finally got my E45E fixed !!! The Ninebot after-sales service is really castastrophic, i lost my time with them.
Hello, glad to have been able to help you 👌 Ride safe !
My e45 requires the non-crown looking tool (I bought the crown one instead of the correct one) anyway, when I took off the stem, i noticed the three (3) reattachable white connectors, but also two additional wires that no way of being disconnected. Did you find this issue as well?
@@yourfrenchtools7807 my Ninebot e45 has two additional wires that DO Not disconnect easily. Is this something that you have heard about. Also, i bought the wrong tool, I needed the square one, not the crown one. Thank you
@@increiblepelotudo hello, Can you send me an email at : [email protected] I will find a solution for you
On the E45E, seems different, I can't unscrew
Hello, new video available on my channel for this type of scooter : kzread.info/dash/bejne/p2h1zbesdq3Vqbw.html
Same here! I got the tool for the crown style tip, i need the other one. E45 is not fun to fix!
Q buen video saludos desde Perú
Gracias por su comentario !
Merci et pour la Ninebot G30 max ?
Je ne possède malheureusement pas cette trottinette, j'ai cru comprendre qu'il fallait changer une pièce en plastique
Cc ça fonctionne pour les E25E l’outil ?
Bonjour, Une vidéo concernant le modèle E25E est sur le point de sortir Pour démonter ces trottinettes, il faut un autre modèle d'outil à tête hexagonal que je produis aussi Vous trouverez le lien dans la description de la vidéo