Shoutout to SciTech Display Doctor that allowed me to run games that would say my graphics card was not good enough.
@prw5611 сағат бұрын
I'm all for having this, but I don't understand why you can't just use the usb adapter and software emulation. On systems that old the emulation ought to be perfect by now...
@fishbone-yq8ts17 сағат бұрын
It was pretty expensive list so you asked a Billy Joel to help
@Curt_Sampson20 сағат бұрын
2:52 _"...the PC's I/O memory space"_ Am I being too pedantic when I point out that should be, "the PC's I/O _address_ space"? But more seriously, this is brilliant. I have been _so_ missing my good old I/O port and IRQ conflicts on all these new modern machines.
@JasonCarmichael21 сағат бұрын
Why are DOS games so much better than modern "3D hyperrealistic gaming of today"? Because DOS games are simply games AND modern "3D hyper-realistic games of today" are not remotely real.
@matthewc4590Күн бұрын
@14:10 It's always fun to see a wizard at work.
@loganjorgensenКүн бұрын
Thank you for the video, you read about expanded video cards in wikis but you hardly ever get the name and models listed. EGA 640x350 kind of bugs me retrospectively because 80x30 ASCII would work using 640x360 instead or 360/30=12 as in a nice clean 8x12 character resolution. Just 10 measly rows short, ah so the monitor spec limit is why we had 350 tall.🤔 Hence why someone would make a 480p compliant EGA card, 80x30 ASCII with the standard 8x16 character. I don't dislike EGA but the whole CGA monitor compatibility failsafe setup meant so few games ever used the full 64-color system palette.☹ Also the default colors were still pretty loud that I think one more generation of Composite Artifact Color output was warranted for the video card standard. That is the rub of higher than standard, you form a hardware and driver island that others have to support or don't heh, plus pairing it with a compatible monitor too. Regardless very cool screen modes by that card.😁
@sysghostКүн бұрын
" .... in the mid naughties.... " 😂
@akashashenКүн бұрын
I'm calling it cheating in the era of Minecraft on a TI calculator, BUT not cheating with regards to the actual intent of most cartridge console makers. I found you looking for the classic, "Doom on," journey, 6502 in my case. Still awesome.
@wyldelf2685Күн бұрын
Excellent 👍👍 I wish companies that do New games for retro systems like NES and Genesis would think more like you did here , , because I'm tired of MEGAMAN and Castlevania imitation games , , I mean Faceball 2000 did get an NES release so why are homebrew folks stuck in such a limited choice box ???? This is excellent 👍 how about BloodRayne on the NES for next project ????? 🎉❤🏆🏆
@smegheadGOAT2 күн бұрын
check out the cardputer
@MrJailh2 күн бұрын
Do you want Gravis Ultrasounds ? Because that's how you get Gravis Ultrasounds.
@dm-dl6dg2 күн бұрын
Have a similar issue but chip is on a handset is it possible to remove the chip and do it if so were can I get the pin out details for the chip would be appreciated. And would I need to power the chip with 1.8 from say bench supply?
@stevetheborg2 күн бұрын
i have a kaypro mainboard. very similar
@DoctorOnkelap3 күн бұрын
perfect system!
@DamirUlovec3 күн бұрын
Minimum of 3.7MB to run DooM. Those were days...
@EirikrTinkerTries3 күн бұрын
I read this 3 times as “massive d0ng computer” - I was very confused.
@Hp4Z4 күн бұрын
Oo cool, makes me want to draw waveform and then have them converted to sounds
@Calebjoyemusic5 күн бұрын
I must have the United States version. It's also a e945 but without the battery and it's also black. It died this week and is out of warranty. Looking for repair
@DerMarkus19825 күн бұрын
It's weird to *nowadays* see the MS-DOS Editor (QB.EXE /EDIT %filename) running on *real, m o d e r n hardware* , let alone DOOM in that configuration! I know, the MoBo isn't the newest (Try that wire-bodging on a Dark Hero! 😁 ), but still! Sir, have a thumb up, have a sub! 🤓
@Ghisisan_5 күн бұрын
I LOVE the old Indiana Jones games... 😊
@user-ro1cc8tz6d5 күн бұрын
don't trust on linux kernel team. They have been on a purge lately
@harbinger2006 күн бұрын
Awesome work. Recently a easier option appeared PCEM17. PC emulator on hardware level. All you need is a powerful CPU. For example a ryzen 3500X will run it good. Performance is excellent and you can emulate a lot of different hardware, especially good is that it supports Voodoo 3dfx hardware. It can even do Windows 98 and supports routing the MIDI to host OS to an MT-32 emulator.
@barsa957 күн бұрын
Great job!
@martyJJ7 күн бұрын
I don't have a rational explanation but your videos about winamp/IE/Windows upgrades just popped into my memory out of nowhere (it has been what, 10-11 years?). Glad to see that you are still here and still making videos. Hope you're doing well! See you in another 10 years I guess 🫡
@josephkanowitz68757 күн бұрын
ב''ה, I was looking into this back in the day; SDVO was one of the possibly non-standard 'standards.' Possibly this is MEC?
@marisakirisame8677 күн бұрын
Useful for my SB Pro 2.0 and ESS ES1488
@jimbotron708 күн бұрын
Brilliant hack, congratulations
@zyxwvutsrqponmlkh8 күн бұрын
3:10 You wouldn't just go on the internet and tell lies would you? USB was released in 1996 and absolutely supported and was supported by dos.
@Enestheleafeon548 күн бұрын
😢😢😢 I want one I love old dos more then windows/ubuntu
@jackgerberuae8 күн бұрын
This is supercool ⭐️⭐️⭐️⭐️⭐️
@jonathansnow18869 күн бұрын
The other thing this would be super useful for is controlling a 5 1/4" floppy drive, as this is extremely difficult on modern computers.
@kerr12219 күн бұрын
I have no interest in installing an ISA slot. but that thumbnail was too hilarious to not click
@Nekudza9 күн бұрын
GP2 engine is weird - you specify target fps in the game settings and it's locked at 25,6 fps maximum if I remember correctly. To check how the PC copes with it, you need to press O during gameplay and it will show you CPU Occupancy while button is pressed. If CPU can't handle your graphics settings, it will show over 100% and gameplay will slow down to reach fps target
@EarnestWilliamsGeofferic9 күн бұрын
I'm sorry I haven't seen all of your videos, but I have a question: Have you ever tried using a 386DX based board with VLB support? Then you could use the 3Dfx Game Blaster VLB.
@Xalgucennia10 күн бұрын
Oh ISA, the only ISA card I ever owned was my creative soundblaster. Good times
@paleophyte10 күн бұрын
Do you by chance still have the Gerbers for the end plates? I’d love to get some printed! Sorry if you’ve already mentioned it somewhere…
@Hulkeq210 күн бұрын
Come on come on lads, Why pretend 86box and PCem don't exist.. Granted this is great but Dosbox isn't the only kid on the block.
@marcosrocha231211 күн бұрын
Fantastic !!!
@moseshorowitz434511 күн бұрын
To avoid this ungainly configuration, how about creating an ISA backplane, with an adapter for the SBC that would sit it in one of the slots, much like the old Zenith 8-bit computers?
@michahcc11 күн бұрын
Nice thumb.
@user-ew7vj3hw9m11 күн бұрын
Cheating? Yep but it’s funny so it gets a pass
@EirikrTinkerTries11 күн бұрын
Would be cool to see all the Vogons and other similar sites tweaks for windows 95 be applied here, and run a driver updater tool like SGI to see if it can find all the missing drivers. More modern kernels running on 95, and games backported by that one dude
@wise_guy423011 күн бұрын
Are these available for purchase? Prefer assembled, if possible. Or at least modules. If soldering required, I can live with it for the right price.
@WilliamAshleyOnline11 күн бұрын
I am very curious if the Danalog DDX 3216 could be reflashed to run a dos variant or os/2 or unix or something.. currently it works with a LCD screen but I noticed its CPU is an AM386 sc 300. or 386 chip which has a cga and xt keyboard. Has a eprom and bios encoderdecoder probably to work the firmware. 16 mb ram 2*8 chips) and 16mb flash memory (I think this is where the actual recallable prorgam information is like the state of the faders, programs fxs settings etc.. ) while I am guessing the ram is used to process between the CPU and the SHARC processor and maybe process thedigitalaudio and midi etc.. not 100% sure. But I am curious if it would be possible to reflash a bios onto the eprom (it is a 512kb eprom) and maybe flash DOS onto the 16mb or something so the system boots into dos. It comes with a PMCIA adapter with a chip I think is normally used for floppydisks but maybe this can also process PMCIA cards not sure - maybe the PMCIA slot can be used as a harddrive of sorts. Anyway this seems above my technical level but curious if there is anything I am missing here, is it just a matter of connecting a cga video card to the CGA pin of the CPU??? I am also wondering if the sharp processor itself can act as a soundcard of sorts.. anyway there is already digital / analog dac stuff goign on on this mixer so it feels like it might be possible any info on issues or if this would be possible are really sought and what steps would need to be done to get a monitor, dos and a keyboard hooked up toe the mixer so that the sharc and processing can be unlocked to run more programs than the supplied mixer stuff like stock DSP fxs and audio routing.
@SectorfiveYT11 күн бұрын
would be cool to 3D print a Case for this PC designed to accommodate all of these boards and everything, so that this can be built into a proper PC.
@Jah_Rastafari_ORIG12 күн бұрын
I'd love some sort of add-on for a modern PC that gives you access to real mode DOS and a real serial port so I can run old Motorola RSS...
@wademeyer644912 күн бұрын
Oh, You have given me hope. I came across my old Ultrasound recently and day-dreamed of sharing it's ground breaking deference to its contemporaries with my children. Will be looking for the next video on this.
@PerryCS212 күн бұрын
QDI was one of the most rock solid boards I ever sold for K5 and K6 chips :) Never had one die ever... well, until last year that is... :(
@cgcuriosities782812 күн бұрын
games? run 3d studio R4.1c or do some raytracing with pov-ray.
Пікірлер
Shoutout to SciTech Display Doctor that allowed me to run games that would say my graphics card was not good enough.
I'm all for having this, but I don't understand why you can't just use the usb adapter and software emulation. On systems that old the emulation ought to be perfect by now...
It was pretty expensive list so you asked a Billy Joel to help
2:52 _"...the PC's I/O memory space"_ Am I being too pedantic when I point out that should be, "the PC's I/O _address_ space"? But more seriously, this is brilliant. I have been _so_ missing my good old I/O port and IRQ conflicts on all these new modern machines.
Why are DOS games so much better than modern "3D hyperrealistic gaming of today"? Because DOS games are simply games AND modern "3D hyper-realistic games of today" are not remotely real.
@14:10 It's always fun to see a wizard at work.
Thank you for the video, you read about expanded video cards in wikis but you hardly ever get the name and models listed. EGA 640x350 kind of bugs me retrospectively because 80x30 ASCII would work using 640x360 instead or 360/30=12 as in a nice clean 8x12 character resolution. Just 10 measly rows short, ah so the monitor spec limit is why we had 350 tall.🤔 Hence why someone would make a 480p compliant EGA card, 80x30 ASCII with the standard 8x16 character. I don't dislike EGA but the whole CGA monitor compatibility failsafe setup meant so few games ever used the full 64-color system palette.☹ Also the default colors were still pretty loud that I think one more generation of Composite Artifact Color output was warranted for the video card standard. That is the rub of higher than standard, you form a hardware and driver island that others have to support or don't heh, plus pairing it with a compatible monitor too. Regardless very cool screen modes by that card.😁
" .... in the mid naughties.... " 😂
I'm calling it cheating in the era of Minecraft on a TI calculator, BUT not cheating with regards to the actual intent of most cartridge console makers. I found you looking for the classic, "Doom on," journey, 6502 in my case. Still awesome.
Excellent 👍👍 I wish companies that do New games for retro systems like NES and Genesis would think more like you did here , , because I'm tired of MEGAMAN and Castlevania imitation games , , I mean Faceball 2000 did get an NES release so why are homebrew folks stuck in such a limited choice box ???? This is excellent 👍 how about BloodRayne on the NES for next project ????? 🎉❤🏆🏆
check out the cardputer
Do you want Gravis Ultrasounds ? Because that's how you get Gravis Ultrasounds.
Have a similar issue but chip is on a handset is it possible to remove the chip and do it if so were can I get the pin out details for the chip would be appreciated. And would I need to power the chip with 1.8 from say bench supply?
i have a kaypro mainboard. very similar
perfect system!
Minimum of 3.7MB to run DooM. Those were days...
I read this 3 times as “massive d0ng computer” - I was very confused.
Oo cool, makes me want to draw waveform and then have them converted to sounds
I must have the United States version. It's also a e945 but without the battery and it's also black. It died this week and is out of warranty. Looking for repair
It's weird to *nowadays* see the MS-DOS Editor (QB.EXE /EDIT %filename) running on *real, m o d e r n hardware* , let alone DOOM in that configuration! I know, the MoBo isn't the newest (Try that wire-bodging on a Dark Hero! 😁 ), but still! Sir, have a thumb up, have a sub! 🤓
I LOVE the old Indiana Jones games... 😊
don't trust on linux kernel team. They have been on a purge lately
Awesome work. Recently a easier option appeared PCEM17. PC emulator on hardware level. All you need is a powerful CPU. For example a ryzen 3500X will run it good. Performance is excellent and you can emulate a lot of different hardware, especially good is that it supports Voodoo 3dfx hardware. It can even do Windows 98 and supports routing the MIDI to host OS to an MT-32 emulator.
Great job!
I don't have a rational explanation but your videos about winamp/IE/Windows upgrades just popped into my memory out of nowhere (it has been what, 10-11 years?). Glad to see that you are still here and still making videos. Hope you're doing well! See you in another 10 years I guess 🫡
ב''ה, I was looking into this back in the day; SDVO was one of the possibly non-standard 'standards.' Possibly this is MEC?
Useful for my SB Pro 2.0 and ESS ES1488
Brilliant hack, congratulations
3:10 You wouldn't just go on the internet and tell lies would you? USB was released in 1996 and absolutely supported and was supported by dos.
😢😢😢 I want one I love old dos more then windows/ubuntu
This is supercool ⭐️⭐️⭐️⭐️⭐️
The other thing this would be super useful for is controlling a 5 1/4" floppy drive, as this is extremely difficult on modern computers.
I have no interest in installing an ISA slot. but that thumbnail was too hilarious to not click
GP2 engine is weird - you specify target fps in the game settings and it's locked at 25,6 fps maximum if I remember correctly. To check how the PC copes with it, you need to press O during gameplay and it will show you CPU Occupancy while button is pressed. If CPU can't handle your graphics settings, it will show over 100% and gameplay will slow down to reach fps target
I'm sorry I haven't seen all of your videos, but I have a question: Have you ever tried using a 386DX based board with VLB support? Then you could use the 3Dfx Game Blaster VLB.
Oh ISA, the only ISA card I ever owned was my creative soundblaster. Good times
Do you by chance still have the Gerbers for the end plates? I’d love to get some printed! Sorry if you’ve already mentioned it somewhere…
Come on come on lads, Why pretend 86box and PCem don't exist.. Granted this is great but Dosbox isn't the only kid on the block.
Fantastic !!!
To avoid this ungainly configuration, how about creating an ISA backplane, with an adapter for the SBC that would sit it in one of the slots, much like the old Zenith 8-bit computers?
Nice thumb.
Cheating? Yep but it’s funny so it gets a pass
Would be cool to see all the Vogons and other similar sites tweaks for windows 95 be applied here, and run a driver updater tool like SGI to see if it can find all the missing drivers. More modern kernels running on 95, and games backported by that one dude
Are these available for purchase? Prefer assembled, if possible. Or at least modules. If soldering required, I can live with it for the right price.
I am very curious if the Danalog DDX 3216 could be reflashed to run a dos variant or os/2 or unix or something.. currently it works with a LCD screen but I noticed its CPU is an AM386 sc 300. or 386 chip which has a cga and xt keyboard. Has a eprom and bios encoderdecoder probably to work the firmware. 16 mb ram 2*8 chips) and 16mb flash memory (I think this is where the actual recallable prorgam information is like the state of the faders, programs fxs settings etc.. ) while I am guessing the ram is used to process between the CPU and the SHARC processor and maybe process thedigitalaudio and midi etc.. not 100% sure. But I am curious if it would be possible to reflash a bios onto the eprom (it is a 512kb eprom) and maybe flash DOS onto the 16mb or something so the system boots into dos. It comes with a PMCIA adapter with a chip I think is normally used for floppydisks but maybe this can also process PMCIA cards not sure - maybe the PMCIA slot can be used as a harddrive of sorts. Anyway this seems above my technical level but curious if there is anything I am missing here, is it just a matter of connecting a cga video card to the CGA pin of the CPU??? I am also wondering if the sharp processor itself can act as a soundcard of sorts.. anyway there is already digital / analog dac stuff goign on on this mixer so it feels like it might be possible any info on issues or if this would be possible are really sought and what steps would need to be done to get a monitor, dos and a keyboard hooked up toe the mixer so that the sharc and processing can be unlocked to run more programs than the supplied mixer stuff like stock DSP fxs and audio routing.
would be cool to 3D print a Case for this PC designed to accommodate all of these boards and everything, so that this can be built into a proper PC.
I'd love some sort of add-on for a modern PC that gives you access to real mode DOS and a real serial port so I can run old Motorola RSS...
Oh, You have given me hope. I came across my old Ultrasound recently and day-dreamed of sharing it's ground breaking deference to its contemporaries with my children. Will be looking for the next video on this.
QDI was one of the most rock solid boards I ever sold for K5 and K6 chips :) Never had one die ever... well, until last year that is... :(
games? run 3d studio R4.1c or do some raytracing with pov-ray.