Пікірлер

• 
  @jetstream45413 сағат бұрын

  Shouldn't run it so lean 🤣

• 
  @trentdoss16973 күн бұрын

  You literally just leaned the high side out.

• 
  @videocardzrule3546 күн бұрын

  The Stihl 462 is exactly 1 pound heavier than a Stihl 362.

• 
  @moorefab819211 күн бұрын

  I could have this wrong but I think I had heard back in the day that square grind works really good on green wood, so loggers like it, but for cutting dry logs for firewood, it dulls quicker than round grind. Is that correct?

• 
  @Fleazy91211 күн бұрын

  I’d like to see you and Scott continue to put out videos. I’ll like comment & share as much as possible. Whenever I get my saw back I’m going to be doing some videos for advertising trying to help y’all guys get that 💰💰

• 
  @Fleazy91211 күн бұрын

  Woooooooo

• 
  @Fleazy91211 күн бұрын

  Glock 29 has been my edc for 8 years. 10mm is great. Try the civil defense 2400 fps

• 
  @davidpavshak33015 күн бұрын

  What are the black strips on the bottom of the saw along the metal casing?

• 
  @saltymofo587018 күн бұрын

  Damn fine test sir, a lot of time/ money for this one

• 
  @Fleazy91219 күн бұрын

  I have a 462 at his shop! Can’t wait to get that thing back lol

• 
  @Sawmillingwithj197319 күн бұрын

  and if it is the solenoid were can i get one anyone have any good links thank you

• 
  @Sawmillingwithj197319 күн бұрын

  great video i have a 661 and it has a carb on it like yours does and i put a new coil on and new spark plug and still no spark is it because of that solenoid is bad would that cause it to not spark anyone out there let me know thank you have a great day and God Bless

• 
  @conanhercules5705Ай бұрын

  Thanks for doing this test

• 
  @bobbyhempel1513Ай бұрын

  Just buy good ethanol free gas and mix it yourself. Its better. Husqvarna does not recommend running any pre-mixed canned fuel in their equipment not even their own brand of pre-mixed canned fuel.

• 
  @clemm17Ай бұрын

  I would like to see a comparison to Harvest King 2 stroke gas. Its considarbly less money. I like their grease and use it my tractors and equipment for decades with no problems. Kind of hard to find I get from D&B supply.

• 
  @danielsmith8659Ай бұрын

  Interesting the moment the 8 pin has more load “via with the full comp” it was a tad slower . Makes me wonder with the skip chain if you were dogged in the whole cut if the 8 pin would have actually been faster with the skip chain.

• 
  @sawnut3814Ай бұрын

  What did you use to make the plastic pink? And also the decal

• 
  @RandyTaylor-rl6smАй бұрын

  Husky all day

• 
  @christophercruz6131Ай бұрын

  I love using vp 50:1

• 
  @MrZoopermanАй бұрын

  Pretty cool! Great video

• 
  @pizzashit69Ай бұрын

  I liked and disliked. Nice video!

• 
  @10homie2 ай бұрын

  Intake 661 maxflow. 395 - stock. More air more power.

• 
  @RI-td3gv2 ай бұрын

  The husky has air injection, meaning it has a slightly pressurized air box, so it should not matter what filter they each have

• 
  @derekgood97892 ай бұрын

  500i is same way

• 
  @JS-oy6nn2 ай бұрын

  Love the 1122 sound, very unique.

• 
  @EricChmelarsky-vh7eq2 ай бұрын

  Price,price,price. Husqvarna is less expensive than Stihl. Husqvarna does run sales on their saws. Ive never seen a sale on Stihl. Stihl parts are way more expensive. Full wrap for the 462, 275 bucks. Husqvarna wrap handle, 75 bucks for 572. Put a 25" bar on the 462. Tips over forward. Not balanced well.

• 
  @coast.cutter75522 ай бұрын

  Real data. I agree. Dual ports with the side port is the best combo. Bark box's and strait shots are junk.

• 
  @richardmeyer70182 ай бұрын

  Great test

• 
  @10homie2 ай бұрын

  Need filling carb holes for install this on standard studs?

• 
  @robertocasavecchia91792 ай бұрын

  Troppo tempo si può fare molto meglio

• 
  @americanfreedom12 ай бұрын

  I run klotz techniplate mixed 65 :1 and have for 30 years. I put 12 years on my chainsaw pretty much the same on my weed eater my son raised 3 years straight on a big bore YZ85. Never one failure. No plug fouling or anything. I have also ran it in a couple other two-stroke dirt bikes but I usually don't keep them more than a year or three. Most other oils won't mix at 65:1 without failure. Klotz is King in my book. I run it in everything, it's in my Harley it's in my VW woods buggy it's in my street strip Monte Carlo. Great stuff. About the mix ratio, I started at 40:1 and would foul plugs. I run 90 + octane pure gas. I kept thinning the mixture until it quit fouling plugs. At 60:1 it would go a month then foul a plug. At 65:1 it never fouled one so I've always stuck with that mixture using 100% high octane fuel. The three plus years my son raced his YZ85, we tore it down and it look like new inside except the exhaust side of the rings were Warren a little thinner. Not bad for 3 years of racing practice riding and trail riding without never being rebuilt. My son can ride the wheels off a motorcycle so it never got any slack that's my experience with klotz for almost 30 years and the only two-stroke bikes I'd ever blown up was when using other oils and mixing to the required spec. Once I discovered clots in my twenties and figured what mixed ratio works for me, it's been smooth sailing since

• 
  @user-zg9gh4tx7e3 ай бұрын

  Καλά,δυνατά,αξιόπιστα & στιβαρά και τα δύο αλυσοπρίονα, αν κι εγώ θα προτιμούσα το still ms 066...!!!

• 
  @ericmason86883 ай бұрын

  Maby you should push the oiler more often.

• 
  @billyhaddock55403 ай бұрын

  Redbull661, thanks for shooting all types of 357sig ammo. That underwood gd 125gr at 1568fps is a HARD HITTER. I'm buying a 1997 sig P229 357sig, came with two 12 round mags, case. I also brought a box of 50 rounds/federal hst 125gr ammo. Slide is in a FDE color. happy camper..

• 
  @diverdown6263 ай бұрын

  Turbo taxad popup blocks your ideo

• 
  @NASCAR_NEAL3 ай бұрын

  That 661 was HOGGIN’ that lumber! I have some flomaster pipes attached to my bark box that rolls Coal from the furnace. I swapped the little fuel tank out with a coal boiler plus hopper attachment for them HUGE redwoods. 101” custom titanium guide bar with a full chisel self lubricating chain. Also has solar powered dual revolution marker lights on the bar. Electronic throttle control, twin turbo, liquid helium cooled, anti gravity 990X primary motor. Belt fed auger addition for the sawdust. Custom felling dogs reinforced with rebar & Concrete. The hand brake is also air ride equipped with abs. Needless to say, when I show up on a job site, everyone knows it’s HOG time. I bring a mobile richter magnitude scale so I can monitor the seismograph. If the seismic waves generating while hogging a tree down are too large I have to shut down operations. That’s the only downfall of my saw :)

• 
  @user-ez3mf3ps4x3 ай бұрын

  kzread.info/dash/bejne/pZ6qtbeng7e8hLw.html

• 
  @welshwizard8223 ай бұрын

  36-1 thats crazy on a modern saw. I been running 50-1 as recommended in a work saw and so does everyone else I know, maybe its a uk v us thing. the less you fuss the better they run

• 
  @ericowens9643 ай бұрын

  If you got to check if it's straight after the install then you ain't installing it right. LOL

• 
  @st76503 ай бұрын

  Thanks for the video. I was wondering why Stihl changed there fuel filters from the white to the orange. Haven’t seen to many videos on this. I thought it might be due to them consolidating there parts. But it does makes sense now that you mention it better filter to help reduce scratches in the cylinder walls

• 
  @Sethhaun783 ай бұрын

  Where do u get the kit in 2024..?? My 661 serial number starts 191743

• 
  @januszperz30863 ай бұрын

  Ta piła ma już system m-tronic?

• 
  @Sethhaun783 ай бұрын

  Hey man i have 661cm like neww i put it away ..and it rain great . Now it wont start..??? I put new plug ,checked fuel filter, took apart checked spaceing on flywheel coil.clean gas piston looks great i cannot get it started hurts to pull it seriously. All my big saws fire rite up.????😮it has tons of compression so i checked it has the white solenoid on the carburetor like your videos ..so what else could it be besides the coil??????? Intake boot seemed ok ???

• 
  @davemiller5053 ай бұрын

  I am seriously considering going to 357 sig even though its supposedly a "dying" round because I do my own ballistics gel testing and I consistently get failures to expand through denim from high quality HP's like Gold Dot and HST when shot through my hellcat (3 inch barrel) and G43 ( 3.4 inch barrel) My postulations that these short barrels just cant get the 9mm up to the nominal velocity to reliably expand through denim

• 
  @lucidlight4 ай бұрын

  Thanks for the video. If you switch the solenoid from black to white Do You also need to change the Ignition coil

• 
  @Sethhaun784 ай бұрын

  A drop of what 🛢?oil.?

• 
  @christopherroberts64304 ай бұрын

  Subscribed 😊

• 
  @PJBHolden4 ай бұрын

  So, what’s the conclusion?

• 
  @ankrapek124 ай бұрын

  it's the best 2 stroke oil on the market.

• 
  @user-hr4xf3bp8u4 ай бұрын

  Do not use Klotz oil in a air cold two stroke engine! It is designed for a liquid engine. Use chainsaw two stroke oil!

• 
  @happyhippr4 ай бұрын

  I cant find 9-pin sprockets anywhere now. - im assuming this is 3/8 pitch - let me know if you know where I can buy a 9 tooth sprocket, ideally 3/8 pitch , 0.050 gauge. - I can only find 10 tooth sprockets.