Should I do this everyday when I use my saw first thing in the morning or just one time and I'm done doing it forever
@MrBaptiste003 Жыл бұрын
Hello do you have tested compression on a ms462 in good Health for idea?
@joecostello8452 Жыл бұрын
Is this for the mtronic
@mariosupertramp93963 жыл бұрын
Why without the orange cap ?
@KensSmallEngineRepair4 жыл бұрын
I like your tachometer bracket, a piece of copper tubing?
@Redbull661
4 жыл бұрын
yes sir
@prescribedfire19534 жыл бұрын
RB I am buying this saw next week. I live at 30’ elevation. I work at 2000’ and on occasion at 6000’ feet. Should I recalibrate when changing elevations? I always am tuning my current saws.
@Redbull661
4 жыл бұрын
I'm guessing NOT. from the stihl manual... 17.1 STIHL M-Tronic Engine Management SystemThe STIHL M-Tronic engine management system electronically controls the ignition timing and fuel metering in any operating condition, factoring in altitude and fuel quality. This system provides optimum performance, whether you are just starting to work or resuming after a break.
@user-iq3cc6eh7x
4 ай бұрын
Yes you should
@Jane1le4 жыл бұрын
I just bought a 462. And it running weird, it revs like a bat out of hell on idle. I check there is no air leak.
@danielcraig6550
3 жыл бұрын
Did u get it fixed
@benredmond82714 жыл бұрын
How often should you calibrate?
@Redbull661
4 жыл бұрын
only when your having issues, make a change to the saw...such as modding the muffler or coil change or solenoid change, stuff like that. Maybe a major change in elevation. I am looking into that. Another guy asked that and I just don't have to deal with that issue so I don't know.
@Redbull661
4 жыл бұрын
on elevation - sounds like you don't need to - From stihl manual - 17.1 STIHL M-Tronic Engine Management SystemThe STIHL M-Tronic engine management system electronically controls the ignition timing and fuel metering in any operating condition, factoring in altitude and fuel quality. This system provides optimum performance, whether you are just starting to work or resuming after a break.
@benfairhall5331
4 жыл бұрын
I like to calibrate mine at the start of each day of work so to speak. That seems to work fine for me. I had to actually explain this procedure to my local Stihl dealer as I think he didn’t do the training on the updated mtronic calibration and was advising people the old way of doing for 661s etc.
@98durangopack
Жыл бұрын
@@benfairhall5331 what a waste of time
@benfairhall5331
Жыл бұрын
@@98durangopack buy one with a carby then 🤷🏻
@chainsawchennel72824 жыл бұрын
🐗
@richardnewxp18112 жыл бұрын
Which is better to buy Ms 462? Or buy MS 462 C-M? God bless you in the name of the Lord Jesus Christ, Amen. Glory to God, Jesus Christ and the Holy Spirit forever and ever, Amin.
@lkjyuiop1987
Жыл бұрын
I bought the cm but if I knew this before I bought I would have bought the other one with just the carburetor but get the 462 it’s a badass
Пікірлер: 22
Should I do this everyday when I use my saw first thing in the morning or just one time and I'm done doing it forever
Hello do you have tested compression on a ms462 in good Health for idea?
Is this for the mtronic
Why without the orange cap ?
I like your tachometer bracket, a piece of copper tubing?
@Redbull661
4 жыл бұрын
yes sir
RB I am buying this saw next week. I live at 30’ elevation. I work at 2000’ and on occasion at 6000’ feet. Should I recalibrate when changing elevations? I always am tuning my current saws.
@Redbull661
4 жыл бұрын
I'm guessing NOT. from the stihl manual... 17.1 STIHL M-Tronic Engine Management SystemThe STIHL M-Tronic engine management system electronically controls the ignition timing and fuel metering in any operating condition, factoring in altitude and fuel quality. This system provides optimum performance, whether you are just starting to work or resuming after a break.
@user-iq3cc6eh7x
4 ай бұрын
Yes you should
I just bought a 462. And it running weird, it revs like a bat out of hell on idle. I check there is no air leak.
@danielcraig6550
3 жыл бұрын
Did u get it fixed
How often should you calibrate?
@Redbull661
4 жыл бұрын
only when your having issues, make a change to the saw...such as modding the muffler or coil change or solenoid change, stuff like that. Maybe a major change in elevation. I am looking into that. Another guy asked that and I just don't have to deal with that issue so I don't know.
@Redbull661
4 жыл бұрын
on elevation - sounds like you don't need to - From stihl manual - 17.1 STIHL M-Tronic Engine Management SystemThe STIHL M-Tronic engine management system electronically controls the ignition timing and fuel metering in any operating condition, factoring in altitude and fuel quality. This system provides optimum performance, whether you are just starting to work or resuming after a break.
@benfairhall5331
4 жыл бұрын
I like to calibrate mine at the start of each day of work so to speak. That seems to work fine for me. I had to actually explain this procedure to my local Stihl dealer as I think he didn’t do the training on the updated mtronic calibration and was advising people the old way of doing for 661s etc.
@98durangopack
Жыл бұрын
@@benfairhall5331 what a waste of time
@benfairhall5331
Жыл бұрын
@@98durangopack buy one with a carby then 🤷🏻
🐗
Which is better to buy Ms 462? Or buy MS 462 C-M? God bless you in the name of the Lord Jesus Christ, Amen. Glory to God, Jesus Christ and the Holy Spirit forever and ever, Amin.
@lkjyuiop1987
Жыл бұрын
I bought the cm but if I knew this before I bought I would have bought the other one with just the carburetor but get the 462 it’s a badass
Girish star karne wala