*How many Ohms does this exact one have??* Thanks in advance
@AlexaRealRoblox17 күн бұрын
iPad Speaker test
@MANANPLAYS26 күн бұрын
Really is speaker used in the place of mic😮
@mansory2717Ай бұрын
У всех разбаланс в ту или иную сторону. Дайте нормально умереть этому архаизму
@jameslaidler2152Ай бұрын
If the Spviet Union did what China is doing today, we may have had some serious contenders in the hi-fi market. Would have been interesting.
@jameslaidler2152Ай бұрын
Surprisingly solid looking deck. Respect the direct drive. Is it a quartz lock system? Or just basic direct drive? Not seeing any Dolby buttons on there, lol. Does it use an alternate noise reduction system, like Dynamic Noise reduction or something similar?
@jameslaidler2152Ай бұрын
Whole this isn't exactly what one would call top hi-fi, and never mind using a surround from another speaker, was it really that to find another new surround for it? Even something which fit the cone diameter, but has to be trimmed down tonfit the basket? Now personally, I like the what looks like a die cast basket, I'd just try to replace the cone and voice coil with something better. Otherwise, still a clever repair.
@jameslaidler2152Ай бұрын
Interesting gear. Any chance of an in depth rundown of the controls and connectivity of the amplifier unit? Looks fun to experiment with.
@unitelkero7292Ай бұрын
Héllo i reve s90 s 70 for sale
@user-bu5kc4lv3p2 ай бұрын
Small speaker from iPad the sound is quite smoother deep bass and perfectly slam of sound with warm sound but no muddies of bass but good for DIY small speaker box to amplify the sound when connected from cheap amplifier with Bluetooth,USB,FM Radio and AUX input for wired devices and its impressive sounding with original audio output from iPad.
@EnjoyGamesss2 ай бұрын
Dude did you upgrade this motherboard ?
@AudioTherapy02 ай бұрын
I have Installed quad core cpu and ssd. It’s still works fine with windows 10.
@longdongsilver47192 ай бұрын
Nicely done. I love that vintage look with the hand made PCB and the soviet transistors from the sixties. That's almost combining electronics and art.
@user-fe5kz7gn4s2 ай бұрын
👍👍
@materiaisdeestudos92192 ай бұрын
None of them sounds as good as a CD.
@ImreBaracsi2 ай бұрын
MP-120 beszerezve !!!!! Kimondottan szép !!!!!!!!!!!!!!! 😊😊😊😊
@classicroleplay24762 ай бұрын
Hello, I have a question about the added spatial sound effect button. I saw that you have facelift version of the buttons line. I have e46 1999 and I have the whole button but dont know where all the wires go. Can you help me with that please? Thank you so much. Kaufi
@thecontourman2 ай бұрын
GZM best to best!
@user-pi8vv3vm8r3 ай бұрын
Does anyone know the diameters of the foam?
@AudioTherapy03 ай бұрын
It’s 2.5 inch
@VinylPro3 ай бұрын
so, at the end: which one is the best ?
@user-xz2xb7ke1r3 ай бұрын
Подскажите пожалуйста что это за колонки euromatic s150? Похожи на s90, но у них всего два динамика.
@parthabhatta19633 ай бұрын
Great video👍👍👍. Couldn't find any appreciable difference excepting that the Russian one appeared to be a more detailed with some airy treble. Would like to see a video as to how you connected the resistance and capacitance with the BUM cartridge.
@MrRafa06664 ай бұрын
I took 2 Chinese models, it seems that the heads are all the same, just change the cover, BUM 1M AND STYLUS (ortofom copy) needs 12 hours of operation to start working, Stylus the more weight the more bass it produced with 3.2g, BUM 1 catilever was too deep Leaning against the magnet wall, I removed the rubber and adjusted it. the sound was pleasant
@vladrodrig4 ай бұрын
Mine doesn't have a serial number, though that could be a fake one but no it's original made in Australia. We're can I find the number that on mine is not in the back?
@pablopastor91574 ай бұрын
Hello, thank you for the video, the link doesn't work and I can't find the sizes to buy new ones
@user-kf8hc1mo1j4 ай бұрын
Cuánto cuestan
@marcelo43275 ай бұрын
In my case the BUM M1 has better treble quality, and very good bass, even good sub bass. But...for some strange reason the BUM M1 captures the magnetic field of the power transformer of the Marantz SintoAmplifier, I changed the head for another one with an AT-95e set and then for another AT-3600 and the hum disappears. I reinstall the head with BUM M1 and move the tray from the rack mount to another base, about 50 CM (20 Inches) away and then the hum disappears. Has anyone had a similar experience?
@MrRafa06664 ай бұрын
the output signal of the AT-95e and AT-3600 is 3.5mV, the BUM M1 is 5.5mV. I had a problem when connecting the equalizer to the bass frequencies, I noticed the catilever had been mounted wrong on the rubber, the rear part should have been touching the magnet, I pulled it the catilever a little and everything was fine
@marcelo43275 ай бұрын
En mi caso la BUM M1 tiene mejor calidad de agudos, y muy buenos bajos, incluso buenos sub bajos. Pero...por algun raro motivo la BUM M1 capta el campo magnetico del transformador de poder del Sinto Amplificador Marantz, cambio el cabezal por otro con un conjunto AT-95e y luego por otro AT-3600 y el zumbido desaparece. Vuelvo a instalar el cabezal con BUM M1 y muevo la bandeja desde el montaje en rack hacia otra base, a unos 50 CM (20 Inches) y entonces el zumbido desaparece. Alguien tuvo una experiencia similar?
@MrRafa06664 ай бұрын
uso excel QD700 mutcho bene, substitui por l BUM M1 una experiencia foi 14hs para mesmo produzir qualidade muito boa no Graves e medios , verifica ajuste do SRT e VTA
@bjarnhedur5 ай бұрын
thank you, your video is really informative. i like how you have more technical data and comparisons, but also your own anecdote. i was worried that the difference would be staggering, but after hearing your thoughts im at ease
@PurpleDreki5 ай бұрын
Mostly indistinguishable to me. Why waste time on adding resistors to a faulty POS stylus/cartridge? Just throw it in the trash. AT 95e and AT-3600 win because of consistent construction.
@ramiroislas19575 ай бұрын
como se pude conectar a un auto esterio?
@Legginsman5 ай бұрын
Послушал сравнение на колонках с неравномерностью +/-2,5дб. Что тут сказать, надо радоваться той игле, что уже имеешь, а менять "шило на мыло" я бы не стал, разница не "вырви глаз" какая. Главное, что не вытекшая ГЗКУ))) У старых ГЗМ-ок часто пересыхает единственная резиночка-иглодержатель, от чего АЧХ начинает плыть, но им и лет-то сколько! Заточка ГЗМ-ок другая, это известно, зато такая заточка менее требовательная к тонарму, а он в СССР бывал укороченный (2ЭПУ65СМ).
@ClevelandThom6 ай бұрын
What’s the song at the beginning
@bobjones37257 ай бұрын
Excellent video, one of the best I've seen on KZread. I'll be going into my HK 7.1 speakers in the near future so I ordered up a frequency generating cable for my phone and the proper glues for doing the job. I loved the sound when I got the car but it has degraded over time. New speakers are unobtanium so repair is the way to go, and, to be honest, it's probably preferred. In my research I found that if you made a 3.5mm adapter cable for your phone, and put out a 50Hz continuous tone, you can adjust the spider when you are gluing it so that the voice coil does not rub. This seems to be preferred over shimming and looks easier. There's a video on that here => kzread.info/dash/bejne/gKSBu7yqXdS3ftI.html I haven't done the job yet but your video will help a great deal. Thank you for making it !!
@ST-cf3ll7 ай бұрын
В правом канале по низам перегруз проскакивает
@leusca17 ай бұрын
Very nice job, but sorry the harman kardon has a very poor sound
@go76624 ай бұрын
Cap
@B.Zh.s8 ай бұрын
Cool video! - did you have to change the head unit with some "special" business CD which has additional pins for Harman/Kardon, or any BMW business CD will do the job?
@AudioTherapy08 ай бұрын
Thanks! Any head unit is compatible with Harman/Kardon system. There are no additional pins for it.
@tdmax22888 ай бұрын
did you use acetone for de-gluing? it de-glues surprisingly quickly
@AudioTherapy08 ай бұрын
Yes
@tdmax22888 ай бұрын
@@AudioTherapy0 ,I have a dust cap, how long should I wait to peel it off with acetone?
@AudioTherapy08 ай бұрын
Depends on glue. Some glues don’t even get dissolved by acetone.
@StanMurray8 ай бұрын
Wow! I like how thin it is!
@StanMurray8 ай бұрын
Good job!
@tdmax22888 ай бұрын
Странно что этот динамик выпустил завод "Динамик"Гагарин. Их же выпускал Рязанский радиозавод. А как ход вообще? И центр шайба сильно жёсткая ли. Думал такие динамики заказать.
@StanMurray9 ай бұрын
Amazing restoration!
@loudspeakertestsmorebyaida38049 ай бұрын
Nice speaker and nice work. It sounds great!
@OneRoomShed9 ай бұрын
Very nice repair. Nice looking speaker too. I'm also glad to your still doing audio therapy sessions 😄
@FTvMNK9 ай бұрын
Soviet speakers looks weird but they sound so good
@AudioTherapy09 ай бұрын
Totally agreed.
@MyStonerMind4209 ай бұрын
Very nice work bro as always!
@serpex779 ай бұрын
Nice job. 🎉
@gibsonfan1599 ай бұрын
You plan on making any more comparison videos like this?
@THR_-9 ай бұрын
Hello, does this system have a slight right side bias when sitting in the driver's seat and the spacial surround is active?
@AudioTherapy09 ай бұрын
Yes. It does very slightly
@THR_-9 ай бұрын
@@AudioTherapy0 thanks for confirming, I thought I was going deaf one ear :)
@paniofvetfac198710 ай бұрын
just close your eyes and listen, and check later which cart opens up the soundstage..its the GZM.
Пікірлер
Great video, good job.
*How many Ohms does this exact one have??* Thanks in advance
iPad Speaker test
Really is speaker used in the place of mic😮
У всех разбаланс в ту или иную сторону. Дайте нормально умереть этому архаизму
If the Spviet Union did what China is doing today, we may have had some serious contenders in the hi-fi market. Would have been interesting.
Surprisingly solid looking deck. Respect the direct drive. Is it a quartz lock system? Or just basic direct drive? Not seeing any Dolby buttons on there, lol. Does it use an alternate noise reduction system, like Dynamic Noise reduction or something similar?
Whole this isn't exactly what one would call top hi-fi, and never mind using a surround from another speaker, was it really that to find another new surround for it? Even something which fit the cone diameter, but has to be trimmed down tonfit the basket? Now personally, I like the what looks like a die cast basket, I'd just try to replace the cone and voice coil with something better. Otherwise, still a clever repair.
Interesting gear. Any chance of an in depth rundown of the controls and connectivity of the amplifier unit? Looks fun to experiment with.
Héllo i reve s90 s 70 for sale
Small speaker from iPad the sound is quite smoother deep bass and perfectly slam of sound with warm sound but no muddies of bass but good for DIY small speaker box to amplify the sound when connected from cheap amplifier with Bluetooth,USB,FM Radio and AUX input for wired devices and its impressive sounding with original audio output from iPad.
Dude did you upgrade this motherboard ?
I have Installed quad core cpu and ssd. It’s still works fine with windows 10.
Nicely done. I love that vintage look with the hand made PCB and the soviet transistors from the sixties. That's almost combining electronics and art.
👍👍
None of them sounds as good as a CD.
MP-120 beszerezve !!!!! Kimondottan szép !!!!!!!!!!!!!!! 😊😊😊😊
Hello, I have a question about the added spatial sound effect button. I saw that you have facelift version of the buttons line. I have e46 1999 and I have the whole button but dont know where all the wires go. Can you help me with that please? Thank you so much. Kaufi
GZM best to best!
Does anyone know the diameters of the foam?
It’s 2.5 inch
so, at the end: which one is the best ?
Подскажите пожалуйста что это за колонки euromatic s150? Похожи на s90, но у них всего два динамика.
Great video👍👍👍. Couldn't find any appreciable difference excepting that the Russian one appeared to be a more detailed with some airy treble. Would like to see a video as to how you connected the resistance and capacitance with the BUM cartridge.
I took 2 Chinese models, it seems that the heads are all the same, just change the cover, BUM 1M AND STYLUS (ortofom copy) needs 12 hours of operation to start working, Stylus the more weight the more bass it produced with 3.2g, BUM 1 catilever was too deep Leaning against the magnet wall, I removed the rubber and adjusted it. the sound was pleasant
Mine doesn't have a serial number, though that could be a fake one but no it's original made in Australia. We're can I find the number that on mine is not in the back?
Hello, thank you for the video, the link doesn't work and I can't find the sizes to buy new ones
Cuánto cuestan
In my case the BUM M1 has better treble quality, and very good bass, even good sub bass. But...for some strange reason the BUM M1 captures the magnetic field of the power transformer of the Marantz SintoAmplifier, I changed the head for another one with an AT-95e set and then for another AT-3600 and the hum disappears. I reinstall the head with BUM M1 and move the tray from the rack mount to another base, about 50 CM (20 Inches) away and then the hum disappears. Has anyone had a similar experience?
the output signal of the AT-95e and AT-3600 is 3.5mV, the BUM M1 is 5.5mV. I had a problem when connecting the equalizer to the bass frequencies, I noticed the catilever had been mounted wrong on the rubber, the rear part should have been touching the magnet, I pulled it the catilever a little and everything was fine
En mi caso la BUM M1 tiene mejor calidad de agudos, y muy buenos bajos, incluso buenos sub bajos. Pero...por algun raro motivo la BUM M1 capta el campo magnetico del transformador de poder del Sinto Amplificador Marantz, cambio el cabezal por otro con un conjunto AT-95e y luego por otro AT-3600 y el zumbido desaparece. Vuelvo a instalar el cabezal con BUM M1 y muevo la bandeja desde el montaje en rack hacia otra base, a unos 50 CM (20 Inches) y entonces el zumbido desaparece. Alguien tuvo una experiencia similar?
uso excel QD700 mutcho bene, substitui por l BUM M1 una experiencia foi 14hs para mesmo produzir qualidade muito boa no Graves e medios , verifica ajuste do SRT e VTA
thank you, your video is really informative. i like how you have more technical data and comparisons, but also your own anecdote. i was worried that the difference would be staggering, but after hearing your thoughts im at ease
Mostly indistinguishable to me. Why waste time on adding resistors to a faulty POS stylus/cartridge? Just throw it in the trash. AT 95e and AT-3600 win because of consistent construction.
como se pude conectar a un auto esterio?
Послушал сравнение на колонках с неравномерностью +/-2,5дб. Что тут сказать, надо радоваться той игле, что уже имеешь, а менять "шило на мыло" я бы не стал, разница не "вырви глаз" какая. Главное, что не вытекшая ГЗКУ))) У старых ГЗМ-ок часто пересыхает единственная резиночка-иглодержатель, от чего АЧХ начинает плыть, но им и лет-то сколько! Заточка ГЗМ-ок другая, это известно, зато такая заточка менее требовательная к тонарму, а он в СССР бывал укороченный (2ЭПУ65СМ).
What’s the song at the beginning
Excellent video, one of the best I've seen on KZread. I'll be going into my HK 7.1 speakers in the near future so I ordered up a frequency generating cable for my phone and the proper glues for doing the job. I loved the sound when I got the car but it has degraded over time. New speakers are unobtanium so repair is the way to go, and, to be honest, it's probably preferred. In my research I found that if you made a 3.5mm adapter cable for your phone, and put out a 50Hz continuous tone, you can adjust the spider when you are gluing it so that the voice coil does not rub. This seems to be preferred over shimming and looks easier. There's a video on that here => kzread.info/dash/bejne/gKSBu7yqXdS3ftI.html I haven't done the job yet but your video will help a great deal. Thank you for making it !!
В правом канале по низам перегруз проскакивает
Very nice job, but sorry the harman kardon has a very poor sound
Cap
Cool video! - did you have to change the head unit with some "special" business CD which has additional pins for Harman/Kardon, or any BMW business CD will do the job?
Thanks! Any head unit is compatible with Harman/Kardon system. There are no additional pins for it.
did you use acetone for de-gluing? it de-glues surprisingly quickly
Yes
@@AudioTherapy0 ,I have a dust cap, how long should I wait to peel it off with acetone?
Depends on glue. Some glues don’t even get dissolved by acetone.
Wow! I like how thin it is!
Good job!
Странно что этот динамик выпустил завод "Динамик"Гагарин. Их же выпускал Рязанский радиозавод. А как ход вообще? И центр шайба сильно жёсткая ли. Думал такие динамики заказать.
Amazing restoration!
Nice speaker and nice work. It sounds great!
Very nice repair. Nice looking speaker too. I'm also glad to your still doing audio therapy sessions 😄
Soviet speakers looks weird but they sound so good
Totally agreed.
Very nice work bro as always!
Nice job. 🎉
You plan on making any more comparison videos like this?
Hello, does this system have a slight right side bias when sitting in the driver's seat and the spacial surround is active?
Yes. It does very slightly
@@AudioTherapy0 thanks for confirming, I thought I was going deaf one ear :)
just close your eyes and listen, and check later which cart opens up the soundstage..its the GZM.