We're all about brewing better beer and putting it on tap. We love home brewing and so do our customers. If you want to keep your finger on the pulse and see all the cool stuff that we are up to please subscribe to our channel.
This channel is one of the best ways that we can educate our customers on how to use our gear and get the most out of it.
We have a very active design and development team and we are constantly making designing new awesome gear. By subscribing to this channel you will also see all the new stuff as we design and release it.
If you want more information visit our website www.kegland.com.au
Пікірлер
Looks very cool. The one without a chiller for a cheaper price would be nice, though. I have a kegerator setup so no need for a cooler. Or maybe a compressor that adds nitro to the existing lines on the go? Just saying :)
Would this work to dispense nitrogen beers provided we attached the appropriate spout? Is this good for commercial kegs as well as home kegs?
Chill the water before carbonating it? Didn't know that...
Wow - Awesome device but HORRIBLE video. Redo the video with one person doing the work and another person recording. Do some BASIC editing. Get OFF the metal table and so on. Half the time the item was off the screen (not just off the center). Oh and sell the device with WiFi Charger pre-installed please..
Can't wait to use these awesome piece of kit !! At around the 22 minute mark, you say the gas can be fitted at the top. Could you run through how to fit this? An elbow will not fit on the bottom of the reducer, at least not in line with the regulator, & the hose is too rigid to bend into place. Any help would be greatly appreciated.
The 24v is a huge down side .. means its not plug and play. I have to set up 2 x 12v batteries seems crazy .. why not just run it as a 240v with some water proofing?
Can i use my old tap springs in them?
Rcently perched this kit. I'm getting product overflowing the head of the still. Is it faulty, or is the tap flow rate to low. What's the recommended flow rate & temperature. What temp do I set the digboil to. It's set at 100*c at the moment
Fully charged, registerd and calibrated, but cannot find a way to get any info out of the thing. Just a 'No data has been received from your device' message. Most of the buttons on the interface do nothing, and in any case their intended functions are unclear. This device has such great potential, but let down by a clunky interface and a shortage of instructions.
How much does a system of 200ltrs coast?
Nice does it show the end product abv?
I specifically came here looking for this product, so the answer is yes
Trying to set up a profile on the app you need a degree. No instructions.
Is that pizza turner coated in teflon?
Instead of running glycol through the jacketed tank, can hot water run through it to heat the tank? I make mead and I am looking to figure out a way to heat the mead up to 140F in order to pasteurize it. Once pasteurized, then I can back sweeten if needed. I am trying to figure out a way to pasteurize in a fermenter.
I'm not sure how I miss this one. Super cool 🍻
Why would you want to connect these?
When will this be avail in US?
How long do you set the purge for for a 500ml can ?
Do you have plans to make a stout nozzle for the mini?
For this price why don't you include power adapter?
good information
Hey Key! Double the signal strength you say. I.e. you get 3db better signal? Or do you go from like -80 to -40dBm ? Cause, thats like 10.000 times better signal :)
will the 8" lid be available for purchase?
Would have been good if you could have the mounting holes in a vesa compliant pattern to allow multiple mounting options.
I must be missing something as I don't understand the purpose. When mashing in you can directly look at the graduations to see the volume and pre-boil or during the boil your volume is up around 100L so the sight glass being only up to 80L would be pointless.
Hi @KegLand, do you have something similar as the tapcooler Nanocanner can Holder to fill cans under pressure? I feel my cans are always undercarbonated and I think it's due to the flow restriction with the long length and small diameter line. Cheers!
By the way I don't have this automatic filler but the nukatap bottle filler
About to buy a few of these. If you pour 10 back to back drinks, wouldn't that affect carbonation level? Or does this lid act as a co2 agitater?
I just got my series X. What is that grey sticker on the back side? How far must be the backside of kegerator from the wall? I have that cylopeptane sticker on my series X. Is it safe? Any chance of leak? Thank you.
Can't see half of what you're doing as it's off camera. Really confusing. Please fix
Great walk-through! I really don't understand the infatuation with 1.5" TC ports. A 1.5" TC port is overkill for an analog pressure gauge, safety PRV, blow-off pipe, spunding valve, thermowell, sample valve, glycol port, ... The X3 lid is so crowded. A 1.5" TC port is too small for a hop drop. The hop drop should be on an 8" to 3" or 8" to 4" adapter cap. There was plenty of real estate on the X3 lid for the 8" TC main port and four smaller TC ports. Interesting decision to forgo a racking valve. I like that you followed Brewtools lead with the welded lid, 8" TC main lid port, glycol jacket and 2" TC cone port to accept a heating element. With the X4, take a look at the Brewtools F-series lid ports.
Where can I buy in UK?
Thanks a million, My 20 pound cylinder Co2 at a professional medical gas and oxygen provider, hooked up, but does not carbonate only slightly 1/5, regardless of how many times and water temperature, even got another sodastrem Terra ,and nothing, tank went through quality and security control Any Suggestions, will appreciate lots of health good weekend
These look great. Why does it take two hours before it can be used?
Looks like awesome bling! A quick question, If I'm already using a RAPT Fermentation Chamber (and won't add glycol to my setup) , will the extra jacket impact the performance / temp movement much when its within the ferm chamber?
A Brewbuilt X2 model with that side heater TC port would make an excellent all in one brewery/fermenter kit.
You would still have to mash the grains somehow but you are right. If we make a more powerful 2" TC element then you could boil inside the fermenter which would be pretty cool. Do you think many customers would want to see this solution?
They look SWEEEEET! on the 53L version, what's the MAX wort volume..... is it 53L plus headspace? Thanks.
I have not tried myself but I think the 53L has about max brimful volume of about 65-70L
That's bloody beautiful! King of the road! Who do I have kiss? 😘😉😎
Gash. Please email us on this and let us know which size you are after and we will sort you out.
@@KegLand Who do I need to email? That would be awesome!
Hey @BrewBuilt , for the X4 put a 2" TC on the roof of the tank for dry hopping.
this subject certainly did come up during the design process but It's really not an issue with the 1.5" TC as the concentric 1.5" to 2" TC reducers are quite cheap. Also we were really running out of space on the top of the unitank so we didn't really have a lot of options in that respect.
@@KegLand "We?" As someone from the States, it's super exciting to see you and @MoreBeer_ collaborating to design these products!
Great vid as usual Kee! Does the new Brewbuilt fit into the rapt fermenter chamber? I’m dying to know. Cheers!
The 53L size (14gal) will fit into the chamber and smaller.
Are these coming to Europe?
I believe stock is already on the way. Have you tried Olbrygging as they will probably get the X3 stock first in Norway and you can probably order from them.
Using the growler spout push in fitting, on the website it says to use 10mmID silicone tube. What type of disconeect takes a 10mm ID tube?
How do we get these in NZ?
www.kegland.com.au/distributor Please refer to our distributors on this map. They can give you the lead time on these products.
How's the stainless steel Fermzilla coming along? Will it be to a similar specification of these brewbuilt tanks or will it be targeting a lower price point?
Yes this is also still coming along but unfortunately we had some delays. We are still going to release these in Australia very soon.
I’m so sag glycol is still so loud. You’re all forgetting the Appartement brewers.
We do have some very quiet smaller 1/2 sized RAPT fermentation chambers that are getting manufactured. If you have a small apartment I think this might be your best option.
@@KegLand brewing 10 gallon batches and love shiny metal and my cip setup. Glycol but quiet would be the answer. Spike seems to have heard this but unfortunately in 110v
I definitely agree on the 8in port instead of the clamp, after a year using my spike conical it the threads loosen up a bit and the clamp definelty helps with the leaking of air even if it’s well libricated with cip lube.
Yes it's strange how many people thing they want the larger opening and it's only once you have used the large lid clamp that you start to realize the design constraints.
@@KegLand I actually didn’t think about that lol, the thing was that when I purchased it, spike was the cheapest option. I’m glad allot more manufacturers are opting in on the 8” opening instead I genuinely think that it helps maintain pressure more effectively.
Really looking forward to getting this one. Suggestion: if you're only going to have the one controller on the glycol unit itself, is there a way to move it to the front? If you have the unit with the back facing a wall you can't see or easily change the temp. Mine isn't facing a wall but where I've had to place it it's still really hard to get myself in a position where I can read it. The power switch being on the front could be good too.
Yes absolutely. The glycol controller can be put anywhere. So for sure you can put it on the front of the fermenter no problem.
So cool that you'd make videos about ideas that you guys are thinking about. I love checking in every now and then to see what you've come up with next!
a video on how to clean the kegmenters easy would be nice.. I have the 118l kegmenter
Awesome video... I'm so ready for that RAPT glycol controller.
Any idea on release dates for the controller? Also can you use it minus the heating element? I rarely use heating, only when I am making a saison or using a kveik yeast. Otherwise very interested in trying 3 units.
Yes we are working hard to get this one completed. I think we can get it released later this year.