Пікірлер

• 
  @boostedgt5.0756 күн бұрын

  Hello foreman. I'm looking at a Jaguar XE 20d 2017. According to the garage, it has a problem. He says the engine makes noise but is drivable. Does that mean the timing chain or connecting rod bearing is damaged?

• 
  @MechanicMatters6 күн бұрын

  It's impossible to say without looking at it. If it's driving then more likely to be the timing chains. It's very possible to have underlying engine damage though.

• 
  @rob196326 күн бұрын

  Probably caused by oil dilution, due to EGR valve , short journeys and too long between oil services.

• 
  @foosty611 күн бұрын

  Is there any chance you can share the pdf of the service sheets

• 
  @MechanicMatters11 күн бұрын

  Hi sorry I don't have an Autodata account at the moment unfortunately.

• 
  @foosty65 күн бұрын

  @@MechanicMatters ne Botha my son's had a whoopsy with his so it's looking like a teardown and rebuild

• 
  @BiGi777Ай бұрын

  Hello! I am about to have such an engine repaired. Can you tell me how far the injectors protrude into the cylinder. Thanks!

• 
  @DR-pb9rxАй бұрын

  Hi, Im inspecting only 40000 km used oem pistons. I cant find piston ring to ring groove clearance. Its like on top ring something like 0.15 mm, that seem excesive to me, but the ring groove looks perfectly square. Is there in autodata any ring to groove clearance data?

• 
  @MechanicMattersАй бұрын

  Hi, there isn't any information on that in Autodata. You're probably looking at Topix for that sort of info. I decided to go for new pistons and rings as a precaution as these engines are so problematic.

• 
  @vasileioslaskaris4445Ай бұрын

  A Greek ingeneer fixed my with rings from Mercedes 2.0! And problem solved

• 
  @Salmonleap2023Ай бұрын

  Just subscribed to your channel 😂,

• 
  @MechanicMattersАй бұрын

  Thank you 😀

• 
  @Salmonleap2023Ай бұрын

  Love your video, funny and serious at the same time 😂

• 
  @cthorno2991Ай бұрын

  You are a brave man messing about with the ingenium. I wish you the best of luck with this car👍

• 
  @ianjsallen100Ай бұрын

  Hi can you do this job with the engine in the car ? Thanks

• 
  @MechanicMattersАй бұрын

  Hi, yes you will need to take the gearbox out and subframe depending on what model you're working on.

• 
  @mohammadhoseni2768Ай бұрын

  Hi, Thank you for your great videos. How much did you cost to rebuild the engine? My car's crankshaft is also broken and I want to repair it myself, but I am not sure about the costs.

• 
  @MechanicMattersАй бұрын

  It depends what all parts you need to change. You will need to set aside around £2000 for parts alone.

• 
  @mohammadhoseni2768Ай бұрын

  @@MechanicMatterstnx a lot

• 
  @DR-pb9rxАй бұрын

  Where you ger the manual?

• 
  @MechanicMattersАй бұрын

  Autodata

• 
  @DR-pb9rxАй бұрын

  Hi, what tool have you used for main bearing bolts? Is it possible with torx or something special from jaguar only?

• 
  @MechanicMattersАй бұрын

  I used ordinary torx. I think it was t60 from memory.

• 
  @NelsonValente-yd5heАй бұрын

  Here you buy the parts?

• 
  @NelsonValente-yd5he2 ай бұрын

  Can you tell were you buy the parts to the engine. If you can give the link please

• 
  @neilhampson28432 ай бұрын

  You are quite correct in what you are saying. Reading a fault code is easy, interpreting it another story. I have a BMW which had a fault on the throttle body, It was causing codes on the traction control and then sent the tyre pressure monitor nuts. Go figure, Its a BMW.

• 
  @MechanicMatters2 ай бұрын

  Yeah 100% Neil. People don't realise how these systems are linked together.

• 
  @neilhampson28432 ай бұрын

  Just a quick question. Who did you get to do the cylinder liners. Everyone I have spoken to told me,they won't touch the ingenium engine. I had one guy in the UK, quite close to Chester, who wanted £1000 just to do the liners. I ended up having the engine rebored +0.5mm.

• 
  @MechanicMatters2 ай бұрын

  I came across that too but found an engineer in Northern Ireland who could change the liners.

• 
  @zukhrufhussain22712 ай бұрын

  Nice

• 
  @williambaird88072 ай бұрын

  A mash hammer it is thanks bud . I been at it for a few hours trying to get in with Stanley blade ever ! . A mash seems brutal. But if that’s what Landrovers do . Thanks again

• 
  @euphoria19252 ай бұрын

  I was hoping for a longer vid😉 Good job👍

• 
  @MechanicMatters2 ай бұрын

  Thank you! I'll get the longer video up soon.

• 
  @forged_billions22 ай бұрын

  What did you use to polish it with ?

• 
  @MechanicMatters2 ай бұрын

  A soft plastic head fitting for a cordless drill. It must be soft enough not to mark or distort the Head surface.

• 
  @riowarwick29633 ай бұрын

  how much do you charge to replace the timing chain, I have 2017 XF which needs done I'm based in Belfast.

• 
  @MechanicMatters3 ай бұрын

  Hi Rio, unfortunately I'm not doing any work for the public at the moment.

• 
  @zukhrufhussain22713 ай бұрын

  How does that fuel pump gear come off when u take the bolt off it comes off easily? Or will you need to pry it?

• 
  @MechanicMatters2 ай бұрын

  Hi, you will need a special puller tool.

• 
  @user-vs8ld5di7j3 ай бұрын

  Holiday music 😳😳😳😳

• 
  @arhumadaleofficial32573 ай бұрын

  Thanks for the video please keep updated

• 
  @zukhrufhussain22713 ай бұрын

  Hi I’ve h just bought the same car with a 175000 miles chain snapped looking for another engine… how much did you buy your jag for?

• 
  @zukhrufhussain22713 ай бұрын

  Hi I’ve h just bought the same car with a 175000 miles chain snapped looking for another engine… how much did you buy your jag for?

• 
  @paulmcpake27343 ай бұрын

  What was the procedure mate

• 
  @euphoria19254 ай бұрын

  Hi. Wheres the location of the camshaft bearing and where can i get them?

• 
  @Edva124 ай бұрын

  Thank you! a lot of work :/

• 
  @eraengineer65124 ай бұрын

  Hi Alfie, do you have an email I can use to get in contact with you? My Jag has timing chain issues and need to get it fixed. Thank you

• 
  @user-yr4bh1oc6s4 ай бұрын

  What is the problem. please.

• 
  @MechanicMatters4 ай бұрын

  Hi, the big end bearing spun on the crankshaft.

• 
  @user-yr4bh1oc6s4 ай бұрын

  What is the problem. please.

• 
  @04tsxpower5 ай бұрын

  Allie in Canada looking at a Jaguar F Pace P400. You definitely look like the right man to ask. Good engine?

• 
  @MechanicMatters5 ай бұрын

  Hi Allie, thanks for your comment. I did work for JLR for a short time but that engine was only coming into production. I don't have any first hand experience with it unfortunately.

• 
  @jrodri14ii5 ай бұрын

  This give me a headache to look at haha

• 
  @jrodri14ii5 ай бұрын

  You’re my guide in caring for my XE. These cars are kind of a nightmare. But I’m committed now. Haha. How do you get all the specialized tools? I can’t find them here in the US. I’ve been looking for the injector remover and it doesn’t seem to be possible in the US.

• 
  @MechanicMatters5 ай бұрын

  Haha they're a labour of love! I got the timing tools off ebay. They were around 100 dollars or so. I didn't need a special tool for the Injectors. I was able to work them side to side while applying some upward pressure.

• 
  @jrodri14ii5 ай бұрын

  I can’t tell if you have the 20D or 20t. I’d clean out the DPF if that’s what you have out. It’s an expensive bit, and a a diluted pool acid clean is plenty to clean it out.

• 
  @MechanicMatters5 ай бұрын

  Hi, thanks for your comment. It's a 2.0 Diesel. Yes 100% I'll be cleaning it out. The dpf is most likely blocked. I didn't check pressure readings before taking the engine out.

• 
  @garymiller72185 ай бұрын

  Most of your video's wont come on dont know why

• 
  @MechanicMatters5 ай бұрын

  Hi Gary, sorry about that. Are they working now?

• 
  @anonymous1one7255 ай бұрын

  I would not recommend this

• 
  @JohnJohn-ij5rj5 ай бұрын

  Just skim it properly 😂

• 
  @user-li3ys2zb8c5 ай бұрын

  Hello, can you help me with a problem with the oil pump.the old one has a tensioner and the new one does'nt.what can i do?

• 
  @MechanicMatters5 ай бұрын

  There was no tensioner for my oil pump. I'm not sure if the part was ever changed or superseded. Get your parts supplier to confirm it's the correct part for your engine.

• 
  @timmiller24605 ай бұрын

  How many miles had it done?

• 
  @MechanicMatters5 ай бұрын

  Hi Tim, 105,000 miles ruffly

• 
  @Rocco1015 ай бұрын

  What year is that xe. Im getting ready to buy a xf on friday. Is this going to be a huge mistake?

• 
  @MechanicMatters5 ай бұрын

  Hi Rocco, it's 2015. Any JLR vehicle's with the 2.0 ingenium diesel engine will suffer with these issues unfortunately. Unless they have been serviced every 6,000 miles or so.

• 
  @Rocco1015 ай бұрын

  Thank you sir I appreciate you

• 
  @klssn346 ай бұрын

  Take some brake cleaner and a plastic scraper, that way you won't ruin the surface

• 
  @anton_boika6 ай бұрын

  Thank you for a nice video! I enjoyed it 😃👍

• 
  @MechanicMatters6 ай бұрын

  Thank you Anton!

• 
  @youtuberwanttobe60156 ай бұрын

  Hi I actually bought a xe 2016 with 126k miles It drives perfect I did full service with best products But is it normal that this engine is loud and it have little tick sound There is no engine light or codes

• 
  @MechanicMatters6 ай бұрын

  Hi thanks for your comment. The engines can be a bit louder than others. The ticking noise may be from your timing chains. Find a Jaguar/ Land Rover specialist in your area to have a look over it. If it does need timing chains then you can make a decision what to do next. If not then you have peace of mind. If you keep driving and there is a problem, eventually you may need an engine.

• 
  @youtuberwanttobe60156 ай бұрын

  @@MechanicMatters thank you so much for your reply Can you suggest someone I don’t know I have been scammed before Can I send you a video how can I send ? If it’s possible it will be really helpful I live in west Ealing London w13

• 
  @youtuberwanttobe60156 ай бұрын

  @@MechanicMatters I have a ton of service history which shows timing chain is done like 30k miles ago with original recipts But don’t even know if those are real It looks real but you know nowadays And I have heard that the sounds comes from turbo too it’s common issue or pistons

• 
  @MechanicMatters6 ай бұрын

  I live in Northern Ireland so unfortunately I can't really recommend anybody close to you. You can send me a video on Facebook messenger to Alfred Shiels if you want.

• 
  @youtuberwanttobe60156 ай бұрын

  @@MechanicMatters hi sent you message and video on Facebook thank you for your help p

• 
  @heriotpayne6 ай бұрын

  well wont be buying anything with this engine in . Any design that makes you take the gearbox of to service the timing chain is just plain stupid most designs dont require you to do this so will spend my money on them . Buy a car with the ford based engine in much better unit

• 
  @jerppu40546 ай бұрын

  Hi, um with common issue like this would u recommend me to buy it in my 20s local sales for that car go for like 12.5-30k ish mostly driven like 100k-125k.. Is it worth the risk?

• 
  @MechanicMatters6 ай бұрын

  Hi, thanks for your comment. It depends how much you buy it for. I think anything around that mileage you'll need to do a full engine rebuild. This could cost £4,000 - £6,000 GBP. You can save some money on labour if you're capable of doing the work yourself. I think with regular oil changes these engines perform better than they have been doing.

• 
  @user-hq7vq7ib2m6 ай бұрын

  Thank you for the work you are doing. The question is the method of sealing the filter with the crankshaft

• 
  @MechanicMatters6 ай бұрын

  Hi thank you for your comment. I'm not sure exactly what you mean. There is an oil filter but this is not directly at the crankshaft. There are two oil seals at the crankshaft, one on each side. These are called main oil seals.

• 
  @user-hq7vq7ib2m6 ай бұрын

  What is the tightening torque number with a dynometric wrench for the crankshaft and cylinder head?

• 
  @MechanicMatters6 ай бұрын

  ​@@user-hq7vq7ib2m the torque settings for the crankshaft main bearings and big end bearings are shown at 3:33 of this video. There will be a video with the cylinder head settings coming soon.

• 
  @user-hq7vq7ib2m6 ай бұрын

  135NM

• 
  @MechanicMatters7 ай бұрын

  Hi Anton, thanks for your comment. I'd like to hear the noise. Maybe you can upload a video of it? Depending on mileage and how often you change the oil it's very possible that serious engine damage could be starting. If so you do not want to continue to drive the vehicle. These cars are great but the engines are prone to a lot of issues.

• 
  @RRL551Dynamic7 ай бұрын

  Great video, very exciting part of the rebuild for me is looking at all the new goodies, all the best to you and hope it goes well.

• 
  @MechanicMatters7 ай бұрын

  Thank you very much!