Get more updates about my artwork at facebook.com/nakedeyestudios and follow me at twitter.com/.nakedeye Visit my Etsy shop at www.etsy.com/shop/nakedeyestudios
Been looking forever to find just one video of the train backing in to Kings Cross…Thank you!
@brucesmith86808 ай бұрын
I watched part of your video and fixed in 5 minutes or less. That was only because you took the time to make this video. THANK YOU
@ricktaylor26 Жыл бұрын
I like your attitude
@kevinrickey3925 Жыл бұрын
Great Video, I like your subtle humor and more. My Kenmore series 90 is so close to yours.. My daughter loves to overload the capacity no matter what. fixing mine today. Thanks for a good video! 🙂
@jameslayne6424 Жыл бұрын
I'M GOING FOR IT. THANK YOU KIND SIR. !!!!!
@NakedEyeStudios Жыл бұрын
DO INDEED GO FOR IT!! 😂
@docbones213 Жыл бұрын
🍻
@dochollliday7452 Жыл бұрын
The underwear (Dawg) I was for sure in Sears, Mongomery Wards you name it I was a bandit.
@pamparker4047 Жыл бұрын
God bless your heart ❤
@beavejolly7009 Жыл бұрын
Schmeg, lol
@emoheroine2 жыл бұрын
I was able to fix my washer because of this. Cost me $5
@CraftAero2 жыл бұрын
Why did KZread wait 11yrs to recommend this video to me ? This is the kinda shit I wanted all along !
@carribean6262 жыл бұрын
You saved me $175, and I was hellah broke too. Thank you so very much. I was able to get the parts from Genuine Replacement Parts GRP. YOU ROCK!
@gyoung472 жыл бұрын
I have a similar Kenmore. I am having a problem in removing the plastic agitator cap that protects the hex bolt. It is extremely tight. I'm afraid I might brake the two little handles that you use to remove the cap. Do you have any ideas about removing the cap?
@NakedEyeStudios2 жыл бұрын
In my experience, those handles are a somewhat flexible plastic. It’s probably gunked up with softener/soap residue. Try to move it up and down, rocking side to side, or maybe a flexible butter knife around the edges? The o-ring on the cap is also replaceable (and cheap) if it rips.
@aleciaappliance76672 жыл бұрын
I thoroughly enjoyed your video your innuendos and jokes gave me a laugh great video thank you
@yessica20062 жыл бұрын
You helped a lot !!! Thanks 🙏
@suemacdougall8742 жыл бұрын
Worked like a charm, cost me $12 for two sets of dogs from Amazon. Took me about 10 minutes to repair. Thanks, you saved me hundreds !!
@favorite34243 жыл бұрын
Ok, thanks for this video. I repaired mine myself. However, the agitator is spinning all the time. It does not pause at all. Wondering what I did wrong and will this make the machine break. Any ideas?
@NakedEyeStudios3 жыл бұрын
Are you using a lower water level? When mine do smaller loads/less water/fewer clothes they tend to spin more continuously. They go slower/pause when there is more resistance.
@favorite34243 жыл бұрын
@@NakedEyeStudios Hey thanks for the reply. That was it. It was less clothes in there. It is working fine now. Thanks again.
@karlquill17323 жыл бұрын
Its so cute!!! 🥺🥺🥺🥺✨✨✨✨
@ruaidhrilinden72893 жыл бұрын
That’s so cool
@carmenspina79673 жыл бұрын
Wow, thank you for sharing. I just did the repair myself......it took about 20 mins for me, i took photos along the way to be safe. Thank you so much:)
@laurasabby49213 жыл бұрын
You ROCK! Yours was the only video that explained why there was NOT a bolt under the agitator cap!!!! THANK YOU! I used a pair of lineman's pliers to loosen the 'nut' and they worked perfectly, Thank You again!!
@psycosyin3 жыл бұрын
Thank you! Every other video said to use a 7/16” socket to remove the bolt, I was like, there is no bolt! I guess it’s tough being accustomed to only the elite... By the way, my top lid seal is broken in the exact same way.
@EC44003 жыл бұрын
$1.40 for Whirlpool at Home Depot.
@seaslug10023 жыл бұрын
Yo I was here when I was like 3
@dmichellefriday63003 жыл бұрын
I have scrolled video after video found on to put dogs & O Ring for cover (dogs) put them on today & sounds worse than before ... L. S. Short...found you just scrolling...😱 I have the same washer but 90's model 🤔 Mine isn't spinning clothes out...I'm guessing its probably clutch or cuplor IDK!? SORRY...I'm just excited I found a video with my model...😎 DIY'in (no house call(Covid)...
@kdmead143 жыл бұрын
I used a half in drive ratchet with extension thats square not rounded. Worked great.
@santiduran65053 жыл бұрын
Great job dude but why didn’t u clean it🤭
@elijahhall61073 жыл бұрын
The artist did a good ass good
@elijahhall61073 жыл бұрын
That state looks sick asf
@bairfreedom3 жыл бұрын
My dogs were completely ground to dust. Lol
@Thedonsmoney258233 жыл бұрын
Thats not being a dork thats being smart if you do it by yourself
@malvarez7303 жыл бұрын
THANK YOU SO MUCH FOR THIS!!!!!!!!!!
@Timetryp3 жыл бұрын
My older model Kenmore had a steel 7/16" nut holding the agitator dogs housing in place. The bolt had a cone type washer on it, but I didn't replace it. Very simple fix. Helpful video!
@brandondowlen18364 жыл бұрын
Awesome!
@dragonfly_blue4 жыл бұрын
Thank God I stumbled on this video in 2020.. You just saved me from a $75 house call or $600 new washer!
@thebronzetoo4 жыл бұрын
This is my exact washer and this is the exact issue that just happened! Yeah I bought mine new in 2002!! Thanks man!!
@spicynomad4 жыл бұрын
lol...you had to say it didnt you.
@cynthiafry29954 жыл бұрын
Awesome, just fixed my machine, than you so much!
@dancingpianofairy4 жыл бұрын
Dogs in this case is a portmanteau of directional cogs.
@overlookskate46864 жыл бұрын
Hey have you bought anything there 😅
@michaelmitchener62784 жыл бұрын
Thanks for saving my bacon. I couldn’t find a video with the plastic nut like the “elites” until I came across yours. Repairs were successful. Great humour as well :) Thanks!
@NakedEyeStudios4 жыл бұрын
Michael Mitchener consider your bacon saved!
@whoiskand4 жыл бұрын
Hilarious Video and Helpful I already know how to do this repair I clicked on it to find out why he was using pliers??? 😂😂😂 I see he getting the job done Ghetto style I love it 😂😂😂 BTW your coupler going out on the motor
@NakedEyeStudios4 жыл бұрын
Who is KanD? You have a good ear! The coupler actually did go out, but not until 7 years after this video was made. I replaced it myself in 2017, but didn’t make a video as sticking your head under the washer is just not that sexy...😂
@roseschneider85044 жыл бұрын
What do you mean by "hot" agitator action
@Aschmorr4 жыл бұрын
Finally a video where the washer has the plastic spring cap thing, I couldn’t figure out how to get it out !!
@laurasabby49213 жыл бұрын
That was my problem too! And this was the only video I found that explained why there was not a bolt.
@audreysincavage81114 жыл бұрын
Thank you so much for your video it helped me out immensely. I watched other videos on this but they had bolts on their washers to remove parts , I couldn't figure this out till I came across your video. Plus you have the exact washer i have. Thanks again with sincere gratitude that you took the time to post this!
@NakedEyeStudios4 жыл бұрын
Glad it was helpful!
@jeffparmele86164 жыл бұрын
"Dogs" = "directional cogs".
@fixitmann66854 жыл бұрын
There are 3 or 4 different designs for this "triple action" agitator but surprisingly they all use the same "dog agits" 80040. Some of them you'll need a 7/16 rachet to remove the whole agitator, you'll need to remove the top cap with a chisel or screwdriver... others have the spring and pop apart after turning the square plastic bolt, others don't have that spring and just pull apart... And really, if you don't think you need the "triple action" thing... you can just secure the top part (which is only supposed to turn one way, half the time.. ) to the bottom piece and have it like an old single piece agitator (I'm not recommending this, but it's possible, just hotglue the part where the dogs fit i n the teeth all together... ;) Seriously, the design of these is too complicated!
@johnplaid6484 жыл бұрын
There are tiny St. Bernard dogs down there doing all the work.
@camcam24574 жыл бұрын
Thanks a bunch. I spent $4.oo, saving myself a hundred bucks or so for a repair man. I did it myself. I am 52 and a lady. Really appreciate the video.
Пікірлер
Been looking forever to find just one video of the train backing in to Kings Cross…Thank you!
I watched part of your video and fixed in 5 minutes or less. That was only because you took the time to make this video. THANK YOU
I like your attitude
Great Video, I like your subtle humor and more. My Kenmore series 90 is so close to yours.. My daughter loves to overload the capacity no matter what. fixing mine today. Thanks for a good video! 🙂
I'M GOING FOR IT. THANK YOU KIND SIR. !!!!!
DO INDEED GO FOR IT!! 😂
🍻
The underwear (Dawg) I was for sure in Sears, Mongomery Wards you name it I was a bandit.
God bless your heart ❤
Schmeg, lol
I was able to fix my washer because of this. Cost me $5
Why did KZread wait 11yrs to recommend this video to me ? This is the kinda shit I wanted all along !
You saved me $175, and I was hellah broke too. Thank you so very much. I was able to get the parts from Genuine Replacement Parts GRP. YOU ROCK!
I have a similar Kenmore. I am having a problem in removing the plastic agitator cap that protects the hex bolt. It is extremely tight. I'm afraid I might brake the two little handles that you use to remove the cap. Do you have any ideas about removing the cap?
In my experience, those handles are a somewhat flexible plastic. It’s probably gunked up with softener/soap residue. Try to move it up and down, rocking side to side, or maybe a flexible butter knife around the edges? The o-ring on the cap is also replaceable (and cheap) if it rips.
I thoroughly enjoyed your video your innuendos and jokes gave me a laugh great video thank you
You helped a lot !!! Thanks 🙏
Worked like a charm, cost me $12 for two sets of dogs from Amazon. Took me about 10 minutes to repair. Thanks, you saved me hundreds !!
Ok, thanks for this video. I repaired mine myself. However, the agitator is spinning all the time. It does not pause at all. Wondering what I did wrong and will this make the machine break. Any ideas?
Are you using a lower water level? When mine do smaller loads/less water/fewer clothes they tend to spin more continuously. They go slower/pause when there is more resistance.
@@NakedEyeStudios Hey thanks for the reply. That was it. It was less clothes in there. It is working fine now. Thanks again.
Its so cute!!! 🥺🥺🥺🥺✨✨✨✨
That’s so cool
Wow, thank you for sharing. I just did the repair myself......it took about 20 mins for me, i took photos along the way to be safe. Thank you so much:)
You ROCK! Yours was the only video that explained why there was NOT a bolt under the agitator cap!!!! THANK YOU! I used a pair of lineman's pliers to loosen the 'nut' and they worked perfectly, Thank You again!!
Thank you! Every other video said to use a 7/16” socket to remove the bolt, I was like, there is no bolt! I guess it’s tough being accustomed to only the elite... By the way, my top lid seal is broken in the exact same way.
$1.40 for Whirlpool at Home Depot.
Yo I was here when I was like 3
I have scrolled video after video found on to put dogs & O Ring for cover (dogs) put them on today & sounds worse than before ... L. S. Short...found you just scrolling...😱 I have the same washer but 90's model 🤔 Mine isn't spinning clothes out...I'm guessing its probably clutch or cuplor IDK!? SORRY...I'm just excited I found a video with my model...😎 DIY'in (no house call(Covid)...
I used a half in drive ratchet with extension thats square not rounded. Worked great.
Great job dude but why didn’t u clean it🤭
The artist did a good ass good
That state looks sick asf
My dogs were completely ground to dust. Lol
Thats not being a dork thats being smart if you do it by yourself
THANK YOU SO MUCH FOR THIS!!!!!!!!!!
My older model Kenmore had a steel 7/16" nut holding the agitator dogs housing in place. The bolt had a cone type washer on it, but I didn't replace it. Very simple fix. Helpful video!
Awesome!
Thank God I stumbled on this video in 2020.. You just saved me from a $75 house call or $600 new washer!
This is my exact washer and this is the exact issue that just happened! Yeah I bought mine new in 2002!! Thanks man!!
lol...you had to say it didnt you.
Awesome, just fixed my machine, than you so much!
Dogs in this case is a portmanteau of directional cogs.
Hey have you bought anything there 😅
Thanks for saving my bacon. I couldn’t find a video with the plastic nut like the “elites” until I came across yours. Repairs were successful. Great humour as well :) Thanks!
Michael Mitchener consider your bacon saved!
Hilarious Video and Helpful I already know how to do this repair I clicked on it to find out why he was using pliers??? 😂😂😂 I see he getting the job done Ghetto style I love it 😂😂😂 BTW your coupler going out on the motor
Who is KanD? You have a good ear! The coupler actually did go out, but not until 7 years after this video was made. I replaced it myself in 2017, but didn’t make a video as sticking your head under the washer is just not that sexy...😂
What do you mean by "hot" agitator action
Finally a video where the washer has the plastic spring cap thing, I couldn’t figure out how to get it out !!
That was my problem too! And this was the only video I found that explained why there was not a bolt.
Thank you so much for your video it helped me out immensely. I watched other videos on this but they had bolts on their washers to remove parts , I couldn't figure this out till I came across your video. Plus you have the exact washer i have. Thanks again with sincere gratitude that you took the time to post this!
Glad it was helpful!
"Dogs" = "directional cogs".
There are 3 or 4 different designs for this "triple action" agitator but surprisingly they all use the same "dog agits" 80040. Some of them you'll need a 7/16 rachet to remove the whole agitator, you'll need to remove the top cap with a chisel or screwdriver... others have the spring and pop apart after turning the square plastic bolt, others don't have that spring and just pull apart... And really, if you don't think you need the "triple action" thing... you can just secure the top part (which is only supposed to turn one way, half the time.. ) to the bottom piece and have it like an old single piece agitator (I'm not recommending this, but it's possible, just hotglue the part where the dogs fit i n the teeth all together... ;) Seriously, the design of these is too complicated!
There are tiny St. Bernard dogs down there doing all the work.
Thanks a bunch. I spent $4.oo, saving myself a hundred bucks or so for a repair man. I did it myself. I am 52 and a lady. Really appreciate the video.
Glad it was helpful!
LOL. I LOVED THE USELESS FABRIC TAP =)