Usually posting videos on how to repair or upgrade parts in my cars so you can do it yourself with ease...and a good laugh. I'm also a voice actor and I'll post some bits here too
on my Kia Soul LX 2020, the air filter model number (OEM) was 97133-D3000 if that helps anyone for ordering replacements.
@uxot5 ай бұрын
Well dunno if ill get a reply but...I did everything in order but i can't get rid "ghost" effect from LED's.."just flip them over" yeah but then they don't work...?
@RyanGofast5 ай бұрын
Hey! I definitely reply to all of my comments and I'm glad you asked the question. The short answer is, most LEDs, especially those sold on Ebay or Amazon, and are a bit more problematic. With older cars, the LED replacements you have will work, but they likely have to be flipped if you are getting that "ghosting" effect I mentioned. Newer cars, however, use CANBUS and you need to have higher quality LEDs. I would recommend buying your LEDs from Morimoto or Headlight Revoltuon. Can you explain exactly what issue you are having? BTW, if you have to flip the LED to eliminate the ghosting or flickering, it's because the socket is polarized and so are the bulbs. Yes, the light will still come on, but it won't work properly.
@from2hito4lo7 ай бұрын
Sorry to disappoint, but these guys are clearly NOT all about 'Merica because the products they are selling use stolen IP and are made in China. The original designer/manufacturer of these products is 67 Designs, made in 'Merica.
@mr.speyside52407 ай бұрын
Always empty the glove box first lol
@ryanpanizzoli98507 ай бұрын
Thoughts on the new Ferrari movie coming out?
@RyanGofast7 ай бұрын
I will do a video review of it, but let's just say the attention to detail is insane. It's authentic with little CGI. Like one if the classics (vanishing point, Smokey and the Bandit, Dukes etc)
@ryanpanizzoli98507 ай бұрын
@@RyanGofast I am really excited for it! I think there is also going to be another motorsports movie on Group B Rally racing, like a Ford vs Ferrari thing.
@ryanpanizzoli98507 ай бұрын
Hey man! Merry Christmas!
@RyanGofast7 ай бұрын
Thx dude, same to u!
@__s_k__8 ай бұрын
At 1:45m you say "All you have to do is wash it off and spray it down with some more lubricant". What type of lubricant?
@RyanGofast8 ай бұрын
Ah! Good question. K&N sells the exact lubricant that you need for THEIR filters. I'm not 100% sure of the chemical contents but, it's what they recommend and it works. Super easy to clean the filter and reapply a fresh layer of lube. Cheers!
@__s_k__8 ай бұрын
@@RyanGofast Thanks! Found it. The black aerosol can with the red cap: "performance cotton filter oil".
@ZamwaAhmed10 ай бұрын
Great video although its old.. btw do u still have idea what type and model bulb did you use for low beams (dipped beam)? Thanks
@jeremyforino293310 ай бұрын
I also have a 2020 Kia Soul GT Line Turbo. I wanted the Harmon Kardon Sound System and this was the only way to get it. thanks for the help.
@ellbcee11 ай бұрын
Hahaha. The dealer wanted me to pay $90 to replace the cabin air filter yesterday. I said no thank you.
@ellbcee11 ай бұрын
(I knew better rush to even consider it)
@RyanGofast8 ай бұрын
Yeah, that's why we call the "stealer-ships" because they mark everything up. Sure that price includes labor but 90% of cars make it easy enough with basic tools to get the bad/old filter out and a new clean one in. Cheers! And thanks for watching and commenting !
@YouTuber-ep5xx6 ай бұрын
$90 for a $5 part and 60 seconds of work. But free cup of coffee in waiting area.
@timothykakavas306011 ай бұрын
Air flow is from firewall to cabin. You can't just slide the filter straight out, there's a wiring harness a few inches from it right in the way, thankfully the pleats are vertical so you can flex it towards you as you pull it out to miss the wiring harness. Then reverse with the new one. Mine is a 2013, only one screw in the bottom. Also there's a semi-flexible cloth shroud under the dash/glove box that has to be pulled out and down. it comes out without removing any clips.
@sparkone007 Жыл бұрын
Did you install the 4 black screws to the plate in addition to the stock two?
@RyanGofast Жыл бұрын
Yes
@carnageheart Жыл бұрын
Very helpful. Thank you. Exactly what I was looking for.
@captjeffsparrow Жыл бұрын
Great in-depth review!
@natesroomrule Жыл бұрын
oh god the music is so distracting
@RyanGofast Жыл бұрын
yeah, i have since learned my lesson lol. Thanks for the input though
@natesroomrule Жыл бұрын
@@RyanGofast If you just reloaded it without the music or a softer music in the background id love to watch it.
@RyanGofast Жыл бұрын
@natesroomrule I will see if I still have that video. I should. I'll probably just ditch the music lol
@vedantgohel29 Жыл бұрын
loved the chicago auto show! i was able to go day before yesterday!
@vmgzombie Жыл бұрын
This music...
@Henryloganx2 жыл бұрын
Good job man, help a lot, hope you can do more about the jeep renegade, and don’t worries I don’t care about the music just about get it done 😬👍
@konnofangwolf2 жыл бұрын
Dude get the steel ones(lug bolt) that are like $8 at orylies. Will save your money on bolts.
@july1013music2 жыл бұрын
Tk for de video but you install the brake bulbs too or only the reverse.
@RyanGofast2 жыл бұрын
They are all in the same housing. There is one white bulb for reverse and I believe 2 for the brake lights in each housing . The LED lights on the limited and high altitude trims on the refresh model are very very different and there aren't any bulbs to replace. You'd have to replace the whole housing.
@dennybowles73102 жыл бұрын
Show how the air flow goes on the filter
@RyanGofast2 жыл бұрын
I tried to show it ( though it was brief and not ideal) around 2:55. The arrow basically points towards the front seats (or towards you as you are installing it). If you aim the arrow towards the engine, you did it wrong. I appreciate the comment though. I will be sure to note that on my next video.
@dennybowles73102 жыл бұрын
Thanks Ryan I figured it out. I couldn't have got to that point without you.
@prptropical2 жыл бұрын
Thanks a lot for the video it's very helpful, quick question do you know where is the location of the AWD sensor? Please help me All wheel drive Sensor location feel Renegade 2015
@billwhitney95032 жыл бұрын
Excellent video thank you, very helpful only 1 shows everything properly. Again👍
@arkadiuszswiderski89022 жыл бұрын
Thanks from Poland. Your film help my change filter for my KIA e Soul.
@arronbenit56602 жыл бұрын
This was a great video! Good camera angles and very informative! The music was kinda distracting tho
@TOOTSIEVSHOP2 жыл бұрын
Will this work with the 2020 kia soul S...Great tutorial video btw
@RyanGofast2 жыл бұрын
It should. Hope it helps you! Thanks for watching!
@TOOTSIEVSHOP2 жыл бұрын
@@RyanGofast okay thank you
@ninemilliondollars2 жыл бұрын
Your video helped me not to ruin my glove box getting it open, so thanks for that. As far as the K&N filter, I've used engine air filters on cars and a motorcycle with excellent results. However, care must be taken when using one for on a vehicle with automatic climate control system. Not over-oiling it is necessary so as not to contaminate any sensors that provide feedback to the system.
@RyanGofast2 жыл бұрын
That is very true. And thank you for sharing! Also, thank you fornwatching my video and I'm glad it helped.
@m1kel2 жыл бұрын
u didnt show how u removed them?
@RyanGofast2 жыл бұрын
Are you referring to the light housings/lamps or the bulbs themselves?. Gently pull the bulbs out with bulb removers or your fingers. Just don't squeeze too hard or you'll shatter the glass. They are pretty durable though. To remove the housings, use a plastic prybar. It depends on which lamp though. Some have clear plastic that pops right out with no need to remove the whole housing while others require you to remove the whole housing.
@charlesbrooks93992 жыл бұрын
Why the fuck did you take the axle nut out
@RyanGofast2 жыл бұрын
Well...cause that's the only way to get the hub and rotor off.
@jamesfarler2 жыл бұрын
What headlight bulbs did you end up going with? I just picked one of these cars up and want to replace the factory headlight bulbs. Thanks
@cwmeade2 жыл бұрын
Thanks, most useful!
@jaaebeeee2 жыл бұрын
Can you show how to replace the back seat and the trunk?
@RyanGofast2 жыл бұрын
I can try. I'll have to borrow my friend's renegade. Thank you for asking! I'll try my best to get this done.
@jaaebeeee3 жыл бұрын
Can I do this on my 2021?
@RyanGofast3 жыл бұрын
Yupp!!
@DDRdjNick3 жыл бұрын
Do you run into any hyper flash issues after installation?
@RyanGofast3 жыл бұрын
I have yet to experience the hyper flash with any of the bulbs I buy from Morimoto and The Retrofit Source. I have with some cheap bulbs from autozone and since stopped buying those. You may notice some hyperflashing with looking at the bulbs through a camera/camera phone but that's normal (depending on shutter speed/frame rate). But with these bulbs, installed the way I did in the video, zero flashing or errors.
@Large_Sarge3 жыл бұрын
great video. music is a bit loud. thank you for this guide.
@lousantos13 ай бұрын
Yeah, it’s like changing bulbs in a rockin’ shindig!
@Lionelbari3 жыл бұрын
Great video! So, no flickering or errors on the ECU whatsoever? Just swap and everything goes smooth? Thanks.
@RyanGofast3 жыл бұрын
Correct! You're more likely to run into flickering with cheap LEDs but just make sure you get canbus ones. I have yet to get any errors with any of the LEDs I've used. Which is why I live The Retrofit Source
@davegibson14323 жыл бұрын
Good video even with a few mistakes kept in that a typical owner would make. Permanent washable filter is a good value if you are going to keep the car beyond a year or two.
@RyanGofast3 жыл бұрын
Thanks for the comment and yes, if you plan on keeping the car more than 2 years, the washable filter is great. But for a leased vehicle or a vehicle that comes with a full service plan including filters...no need to worry about it. But, I like that the washable filter help eliminate or reduce waste going into landfills.
@prymaat13603 жыл бұрын
great video but its hard to hear with music playing! i have to say you are very handsome lol what is your ethnicity? :)
@RyanGofast3 жыл бұрын
Ah I'm very sorry about the music. On my computer it sounded fine and then clearly that's not the case for others. Might have to redo this video. Thank you for the compliment! I am hispanic...100% Colombian:)
@prymaat13603 жыл бұрын
@@RyanGofast no worries at all. Was a video that helped me. And yay, I’m from Peru! Hispanic pride! LOL
@Killer_Krysten3 жыл бұрын
I can’t seem to pull the dome light cover off, is there something I’m doing wrong?
@RyanGofast3 жыл бұрын
If you are talking about the one positioned on the ceiling between the rear seats and the front seats, you just need to pull firmly. Use a plastic pry-bar too if you got one to help you pull it out far enough to get your fingers in. But there are two metal retaining clips that really hold the fixture in and therefore require a careful amount of force. Now the one up front in between the mirrors, that one requires more patience and care but I believe it too has metal retaining clips. When you pull, you might here some "cracking" sounds or something snapping. If you were careful, then that's normal. Just the clips popping out of their slots.
@PlanetJigobotTV3 жыл бұрын
Turn your music off when your talking. You use music for transition
@RyanGofast3 жыл бұрын
Thanks for the tip! I Appreciate it!
@josephterrell79383 жыл бұрын
agreed! it was hard to hear him speaking over the sick tunes :)
@RyanGofast3 жыл бұрын
@@josephterrell7938 I appreciate you guys providing feedback. The next video will have improvements !!
@bankersbaux3 жыл бұрын
What are the links to those bulbs ?
@RyanGofast3 жыл бұрын
Hi Jesse, I got most of my bulbs from The Retrofit Source. And some from Amazon. I will try and find the links to the exact bulbs but The Retrofit Source has a nice website that let's you put in make and model and year of the car and it'll show you exactly what bulbs to use
@taticaconsultoria3 жыл бұрын
Nice Vídeo Man! I liked a lot.
@RyanGofast3 жыл бұрын
Thank you Alvaro!
@rashodlewis29183 жыл бұрын
Thank you!
@alexiumartifex35793 жыл бұрын
Thank you for making this video very helpful, do you have a links to the LED's you used?
@RyanGofast3 жыл бұрын
Sure do! I just posted the links in the video description. let me know if you have any other questions
@georgeh31583 жыл бұрын
on every video nobody talks about torqueing the nut .........
@RyanGofast3 жыл бұрын
Yeah thats something I've recently started to implement. Also at the time I made this video, I did not have an adjustable torque wrench. I torque based on feel and experience. Thanks for noting that though :)
@JWabinski3 жыл бұрын
Back spindle nut gets torqued to 129Ft pounds
@RyanGofast3 жыл бұрын
@@JWabinski ah thank you so much for providing that info!!
@anthonyaponte28863 жыл бұрын
How the fuck do you remove the wheel hub then? I'm assuming there's a part two?
@RyanGofast3 жыл бұрын
There is, but as far as the hub goes, you'll need the correct size socket (they make ones specific for hubs...get the black kind at auto zone or other hardware store. They are a stronger material and made for really tight bolts/lugs/nuts) . You will also need a long breaker bar. The longer the better as the longer bara will increase torque output/leverage. I was doing this very half-assed lol and didn't quite have all the tools at home, only at work.
@GuerillaX3 жыл бұрын
I’m glad you didn’t get towed for parking in a “FIAT PARKING ONLY” zone
@GuerillaX3 жыл бұрын
Wow that was a lot of help
@manjotsaini19533 жыл бұрын
I bought the bulb from amazon but i am getting the dim lights and by turning them to other side it doesn’t work what should I do to make it work or do i need to return it.
@RyanGofast3 жыл бұрын
I found that in the Dart, it is very picky with bulbs. I eventually put Morimoto bulbs in it from The Retrofit Source which, though more expensive, solved the "ghosting" faded light effect. Honestly though, the dim light won't kill your battery. LEDs use way less power than halogens and you can imagine how much less is used at such a dim level. Up to you if you are OK with that dim light or if you want to upgrade to something from Morimoto or GTR lighting.
@xaviermason4113 жыл бұрын
Me too bro
@OlecyaNeely3 жыл бұрын
Okay either I’m missing something but my Dodge Dart sxt 2015 doesn’t even have a space for the passenger side air filter. So where is it??
@RyanGofast3 жыл бұрын
later I found out that not all Dodge darts had air filters. Specifically if you don't have the dual zone climate control and just have the basic air conditioning system.
@OlecyaNeely3 жыл бұрын
@@RyanGofast broooo but my Ac smells so bad so what do I do about that ?
@RyanGofast3 жыл бұрын
@@OlecyaNeely there are ways to clean out the whole system like a steamer, but my question to you would be, have you run into any dead animals, or spilled anything in the engine bay? Without a cabin air filtration system, your AC is simply sucking in air from outside, passing it through a heater or air compressor and refrigerant and blowing into the cabin hot or cold air. Your engine air filter will also play a small part in this process as well. Changing that out would be the first step. If it's a relatively new filter, make sure you clean out the airbox too. If you live in northern/colder climates, small animals like to "burrow" around your motor and can easily get into the airport. Your airbox can also suck in insects, and God forbid, small birds/bats. Its rare, but it happens. Lastly, have you spilled ANYTHING in your car, specifically things with proteins in them? Milk, plant water, protein drinks, coffee etc. If by chance you smoke, the tar will "live" in your seats and headliner and become more pungent over time. Getting a good degreaser meant for upholstery/fabrics is key. Chemical Brothers and Adam's polishes make good smoke removers. Let me know what you find or if you have any details about the smells.
Пікірлер
on my Kia Soul LX 2020, the air filter model number (OEM) was 97133-D3000 if that helps anyone for ordering replacements.
Well dunno if ill get a reply but...I did everything in order but i can't get rid "ghost" effect from LED's.."just flip them over" yeah but then they don't work...?
Hey! I definitely reply to all of my comments and I'm glad you asked the question. The short answer is, most LEDs, especially those sold on Ebay or Amazon, and are a bit more problematic. With older cars, the LED replacements you have will work, but they likely have to be flipped if you are getting that "ghosting" effect I mentioned. Newer cars, however, use CANBUS and you need to have higher quality LEDs. I would recommend buying your LEDs from Morimoto or Headlight Revoltuon. Can you explain exactly what issue you are having? BTW, if you have to flip the LED to eliminate the ghosting or flickering, it's because the socket is polarized and so are the bulbs. Yes, the light will still come on, but it won't work properly.
Sorry to disappoint, but these guys are clearly NOT all about 'Merica because the products they are selling use stolen IP and are made in China. The original designer/manufacturer of these products is 67 Designs, made in 'Merica.
Always empty the glove box first lol
Thoughts on the new Ferrari movie coming out?
I will do a video review of it, but let's just say the attention to detail is insane. It's authentic with little CGI. Like one if the classics (vanishing point, Smokey and the Bandit, Dukes etc)
@@RyanGofast I am really excited for it! I think there is also going to be another motorsports movie on Group B Rally racing, like a Ford vs Ferrari thing.
Hey man! Merry Christmas!
Thx dude, same to u!
At 1:45m you say "All you have to do is wash it off and spray it down with some more lubricant". What type of lubricant?
Ah! Good question. K&N sells the exact lubricant that you need for THEIR filters. I'm not 100% sure of the chemical contents but, it's what they recommend and it works. Super easy to clean the filter and reapply a fresh layer of lube. Cheers!
@@RyanGofast Thanks! Found it. The black aerosol can with the red cap: "performance cotton filter oil".
Great video although its old.. btw do u still have idea what type and model bulb did you use for low beams (dipped beam)? Thanks
I also have a 2020 Kia Soul GT Line Turbo. I wanted the Harmon Kardon Sound System and this was the only way to get it. thanks for the help.
Hahaha. The dealer wanted me to pay $90 to replace the cabin air filter yesterday. I said no thank you.
(I knew better rush to even consider it)
Yeah, that's why we call the "stealer-ships" because they mark everything up. Sure that price includes labor but 90% of cars make it easy enough with basic tools to get the bad/old filter out and a new clean one in. Cheers! And thanks for watching and commenting !
$90 for a $5 part and 60 seconds of work. But free cup of coffee in waiting area.
Air flow is from firewall to cabin. You can't just slide the filter straight out, there's a wiring harness a few inches from it right in the way, thankfully the pleats are vertical so you can flex it towards you as you pull it out to miss the wiring harness. Then reverse with the new one. Mine is a 2013, only one screw in the bottom. Also there's a semi-flexible cloth shroud under the dash/glove box that has to be pulled out and down. it comes out without removing any clips.
Did you install the 4 black screws to the plate in addition to the stock two?
Yes
Very helpful. Thank you. Exactly what I was looking for.
Great in-depth review!
oh god the music is so distracting
yeah, i have since learned my lesson lol. Thanks for the input though
@@RyanGofast If you just reloaded it without the music or a softer music in the background id love to watch it.
@natesroomrule I will see if I still have that video. I should. I'll probably just ditch the music lol
loved the chicago auto show! i was able to go day before yesterday!
This music...
Good job man, help a lot, hope you can do more about the jeep renegade, and don’t worries I don’t care about the music just about get it done 😬👍
Dude get the steel ones(lug bolt) that are like $8 at orylies. Will save your money on bolts.
Tk for de video but you install the brake bulbs too or only the reverse.
They are all in the same housing. There is one white bulb for reverse and I believe 2 for the brake lights in each housing . The LED lights on the limited and high altitude trims on the refresh model are very very different and there aren't any bulbs to replace. You'd have to replace the whole housing.
Show how the air flow goes on the filter
I tried to show it ( though it was brief and not ideal) around 2:55. The arrow basically points towards the front seats (or towards you as you are installing it). If you aim the arrow towards the engine, you did it wrong. I appreciate the comment though. I will be sure to note that on my next video.
Thanks Ryan I figured it out. I couldn't have got to that point without you.
Thanks a lot for the video it's very helpful, quick question do you know where is the location of the AWD sensor? Please help me All wheel drive Sensor location feel Renegade 2015
Excellent video thank you, very helpful only 1 shows everything properly. Again👍
Thanks from Poland. Your film help my change filter for my KIA e Soul.
This was a great video! Good camera angles and very informative! The music was kinda distracting tho
Will this work with the 2020 kia soul S...Great tutorial video btw
It should. Hope it helps you! Thanks for watching!
@@RyanGofast okay thank you
Your video helped me not to ruin my glove box getting it open, so thanks for that. As far as the K&N filter, I've used engine air filters on cars and a motorcycle with excellent results. However, care must be taken when using one for on a vehicle with automatic climate control system. Not over-oiling it is necessary so as not to contaminate any sensors that provide feedback to the system.
That is very true. And thank you for sharing! Also, thank you fornwatching my video and I'm glad it helped.
u didnt show how u removed them?
Are you referring to the light housings/lamps or the bulbs themselves?. Gently pull the bulbs out with bulb removers or your fingers. Just don't squeeze too hard or you'll shatter the glass. They are pretty durable though. To remove the housings, use a plastic prybar. It depends on which lamp though. Some have clear plastic that pops right out with no need to remove the whole housing while others require you to remove the whole housing.
Why the fuck did you take the axle nut out
Well...cause that's the only way to get the hub and rotor off.
What headlight bulbs did you end up going with? I just picked one of these cars up and want to replace the factory headlight bulbs. Thanks
Thanks, most useful!
Can you show how to replace the back seat and the trunk?
I can try. I'll have to borrow my friend's renegade. Thank you for asking! I'll try my best to get this done.
Can I do this on my 2021?
Yupp!!
Do you run into any hyper flash issues after installation?
I have yet to experience the hyper flash with any of the bulbs I buy from Morimoto and The Retrofit Source. I have with some cheap bulbs from autozone and since stopped buying those. You may notice some hyperflashing with looking at the bulbs through a camera/camera phone but that's normal (depending on shutter speed/frame rate). But with these bulbs, installed the way I did in the video, zero flashing or errors.
great video. music is a bit loud. thank you for this guide.
Yeah, it’s like changing bulbs in a rockin’ shindig!
Great video! So, no flickering or errors on the ECU whatsoever? Just swap and everything goes smooth? Thanks.
Correct! You're more likely to run into flickering with cheap LEDs but just make sure you get canbus ones. I have yet to get any errors with any of the LEDs I've used. Which is why I live The Retrofit Source
Good video even with a few mistakes kept in that a typical owner would make. Permanent washable filter is a good value if you are going to keep the car beyond a year or two.
Thanks for the comment and yes, if you plan on keeping the car more than 2 years, the washable filter is great. But for a leased vehicle or a vehicle that comes with a full service plan including filters...no need to worry about it. But, I like that the washable filter help eliminate or reduce waste going into landfills.
great video but its hard to hear with music playing! i have to say you are very handsome lol what is your ethnicity? :)
Ah I'm very sorry about the music. On my computer it sounded fine and then clearly that's not the case for others. Might have to redo this video. Thank you for the compliment! I am hispanic...100% Colombian:)
@@RyanGofast no worries at all. Was a video that helped me. And yay, I’m from Peru! Hispanic pride! LOL
I can’t seem to pull the dome light cover off, is there something I’m doing wrong?
If you are talking about the one positioned on the ceiling between the rear seats and the front seats, you just need to pull firmly. Use a plastic pry-bar too if you got one to help you pull it out far enough to get your fingers in. But there are two metal retaining clips that really hold the fixture in and therefore require a careful amount of force. Now the one up front in between the mirrors, that one requires more patience and care but I believe it too has metal retaining clips. When you pull, you might here some "cracking" sounds or something snapping. If you were careful, then that's normal. Just the clips popping out of their slots.
Turn your music off when your talking. You use music for transition
Thanks for the tip! I Appreciate it!
agreed! it was hard to hear him speaking over the sick tunes :)
@@josephterrell7938 I appreciate you guys providing feedback. The next video will have improvements !!
What are the links to those bulbs ?
Hi Jesse, I got most of my bulbs from The Retrofit Source. And some from Amazon. I will try and find the links to the exact bulbs but The Retrofit Source has a nice website that let's you put in make and model and year of the car and it'll show you exactly what bulbs to use
Nice Vídeo Man! I liked a lot.
Thank you Alvaro!
Thank you!
Thank you for making this video very helpful, do you have a links to the LED's you used?
Sure do! I just posted the links in the video description. let me know if you have any other questions
on every video nobody talks about torqueing the nut .........
Yeah thats something I've recently started to implement. Also at the time I made this video, I did not have an adjustable torque wrench. I torque based on feel and experience. Thanks for noting that though :)
Back spindle nut gets torqued to 129Ft pounds
@@JWabinski ah thank you so much for providing that info!!
How the fuck do you remove the wheel hub then? I'm assuming there's a part two?
There is, but as far as the hub goes, you'll need the correct size socket (they make ones specific for hubs...get the black kind at auto zone or other hardware store. They are a stronger material and made for really tight bolts/lugs/nuts) . You will also need a long breaker bar. The longer the better as the longer bara will increase torque output/leverage. I was doing this very half-assed lol and didn't quite have all the tools at home, only at work.
I’m glad you didn’t get towed for parking in a “FIAT PARKING ONLY” zone
Wow that was a lot of help
I bought the bulb from amazon but i am getting the dim lights and by turning them to other side it doesn’t work what should I do to make it work or do i need to return it.
I found that in the Dart, it is very picky with bulbs. I eventually put Morimoto bulbs in it from The Retrofit Source which, though more expensive, solved the "ghosting" faded light effect. Honestly though, the dim light won't kill your battery. LEDs use way less power than halogens and you can imagine how much less is used at such a dim level. Up to you if you are OK with that dim light or if you want to upgrade to something from Morimoto or GTR lighting.
Me too bro
Okay either I’m missing something but my Dodge Dart sxt 2015 doesn’t even have a space for the passenger side air filter. So where is it??
later I found out that not all Dodge darts had air filters. Specifically if you don't have the dual zone climate control and just have the basic air conditioning system.
@@RyanGofast broooo but my Ac smells so bad so what do I do about that ?
@@OlecyaNeely there are ways to clean out the whole system like a steamer, but my question to you would be, have you run into any dead animals, or spilled anything in the engine bay? Without a cabin air filtration system, your AC is simply sucking in air from outside, passing it through a heater or air compressor and refrigerant and blowing into the cabin hot or cold air. Your engine air filter will also play a small part in this process as well. Changing that out would be the first step. If it's a relatively new filter, make sure you clean out the airbox too. If you live in northern/colder climates, small animals like to "burrow" around your motor and can easily get into the airport. Your airbox can also suck in insects, and God forbid, small birds/bats. Its rare, but it happens. Lastly, have you spilled ANYTHING in your car, specifically things with proteins in them? Milk, plant water, protein drinks, coffee etc. If by chance you smoke, the tar will "live" in your seats and headliner and become more pungent over time. Getting a good degreaser meant for upholstery/fabrics is key. Chemical Brothers and Adam's polishes make good smoke removers. Let me know what you find or if you have any details about the smells.