This will probably help to my issue? I owned a honda ctx 700 dct 2014 and is stuck in 1st gear, and i only can drive in automatic mode, only drive in DS mode, not switch to manual mode and it stays in 1st gear when you reach 60km/h and reach the limit of rpm the bike limit itself) The old owner adquired in auction and the first 3 days was perfect, but he left this bike in a yard for 9 months exposed to the weather
@alexanderbeyer1639Ай бұрын
Das Motorrad auf die linke Seite zu kippen und einzuschalten kann auch helfen. Bei mir zu 100% Prozent aber nur kurzfristig. Den Motor zu reinigen und die Rillen rauszuschleifen haben endgültig das DTC wieder zum laufen gebracht. Den schwarzen Stecker abzubekommen war das schwerste Problem. Kilometerstand 55000.
@mauricioregalado562Ай бұрын
Buen video amigo yo ya tenía ese problema
@user-bx8rq9bo2yАй бұрын
최고입니다
@johnjohnlizardАй бұрын
The retaining clip you are messing with at 3:06, does it stay in good with a click or is it always wiggly and loose? Mine got damaged and I need to replace it.
@Simon-wh5mpАй бұрын
The best chain replacement video
@TheDervMan2 ай бұрын
Is this a re-upload? Sure I watched this the other day 🤔
@IFinglikemymotorcycleАй бұрын
Yes, I corrected it, due to incorrect information.
@desotopete2 ай бұрын
Excellent. This is going to become the go to video for adjusting valves for this motorcycle. Excellent tutorial and video editing. I adjusted my valves a few years ago but I was bouncing around to different videos for reference, seems like each was not quit clear.
@stemoonie41362 ай бұрын
Just done exactly this. Worked perfect. Bike was stuck in 2nd gear. Turned off, wouldnt start. Battery was 100%. Cleaned and re fitted, worked. One thing to note (as others did) move the bike on the wheels. There is a speed sensor that typically likes to know the bike is moving before changing gear. Not always but it can help. Thanks man, owe you a beer 👍
@alexanderbeyer16392 ай бұрын
Das Motorrad auf die linke Seite zu kippen und einzuschalten kann auch helfen. Bei mir zu 100% Prozent.
@Ben-cb7uq2 ай бұрын
what parts of the parking brake would you recommend to do as a regular maintenance?
@IFinglikemymotorcycleАй бұрын
The usual cleaning when replacing brake pads. It hasn't been dismantled in 12 years, if it's in this condition it needs a complete overhaul.
@jdmspiritturkey2 ай бұрын
I only need to change the slider. Do I have any chance or do I need to change everything?
@ae.thelred3 ай бұрын
Changed the front sprocket at 25k, figured I'd do this while in there. Broke the plastic casing trying to put the contact tips back in when reassembling. Rolled the dice and got about 100 miles until it went into limp mode a few miles from home. Couldn't rock'n'roll it back into neutral to get it started again. Hopefully a new shift motor ($237 with 1 day shipping) will rectify my mistake...
@IFinglikemymotorcycleАй бұрын
;( A müanyagok eléggé törékenyek sajnos. Sajnálom.
@ae.thelredАй бұрын
@@IFinglikemymotorcycle All good, life goes on :) put 1,000 miles on it last month with no issues.
@victorhernandeznavarro59943 ай бұрын
Si señor!!!! Buen trabajo!!!! 👍🏻👍🏻
@TheDervMan3 ай бұрын
Brilliant. I could watch your videos all day long. Thanks 🤳
@motor__1010__3 ай бұрын
Отличная работа 💪👍🇺🇦
@DUI593 ай бұрын
Good work !!! - Thanks !!!
@IFinglikemymotorcycle3 ай бұрын
I'm glad you liked it.
4 ай бұрын
🏍 ;)
@PeterOldbiker4 ай бұрын
Szép munka!
@IFinglikemymotorcycle4 ай бұрын
Köszönöm. Azért a zsugorfóliázást kis odafigyeléssel megspórolhattam volna.
@TheDervMan5 ай бұрын
That's so satisfying to watch. Your Ultrasonic Cleaner does a brilliant job of cleaning up the parts. Thanks for Sharing. 🔧
@wuja695 ай бұрын
Super film ,dziękuję. Pozdrawiam.
@alejoanaya34685 ай бұрын
Sorry but can you list the products you used like the white bottle or at the bottom of the motor before you reassembled it and the sprays you used please thank you
@wuja695 ай бұрын
Super.
@wuja695 ай бұрын
Dziękuję.
@wuja695 ай бұрын
Dziękuję.
@TheDervMan5 ай бұрын
Wow looks great. How do you stop the brake fluid draining out the system while the calliper is disconnected?
@IFinglikemymotorcycle5 ай бұрын
No way, but I did replace the brake hoses, that video will come later.
@TheDervMan6 ай бұрын
A joy to watch. Thanks for sharing. Those bleed valves are clever 🔧
@afrobuddha6 ай бұрын
Great video! It's shot and edited really well along with being informative the only thing is you need to correct the title as it's the front brake Caliper and not the rear.
@IFinglikemymotorcycle6 ай бұрын
Thank you for the correction. I will fix it.
@Lester-zz6pn7 ай бұрын
Nice vedio i like it.
@killuzokarachay70329 ай бұрын
hey im having trouble finding the starter assembly are theses the same piece?
@giuseppededonno623810 ай бұрын
Ma quando si smonta il motorino bisogna far uscire tutto l'olio del motore? grazie.
@IFinglikemymotorcycle6 ай бұрын
You don't need to.Click to apply
@alexanderbeyer1639Ай бұрын
nein
@bcuzicancuellar547810 ай бұрын
Brilliant! Thanks for posting! I’ve subscribed! Ride safe…
@ihabib2202 Жыл бұрын
Thank you for the great video, I will indeed try that. But which spry are you using, is that a contact spray? Do you recommend something specific?
@cenkdizdar Жыл бұрын
Merhaba bu shift motorunu nerden alabiliriz. Global internet pazarından
@cenkdizdar Жыл бұрын
Nc750x dct 2015
@victormurich5696 Жыл бұрын
Спасибо. Помогло. Все работает)))). Наилучшие пожелания из Украины.
@ROMABUSCADOR Жыл бұрын
Привіт Віктор, яка проблема була з DCT.
@victormurich5696 Жыл бұрын
@@ROMABUSCADOR Залипала коробка при переключении на пониженную. Температура окружающей среды влияла на время проявления глюков. Чем теплее, тем быстрее зависание. Игры с маслом и адаптацией коробки =0. Оф дилеры - соболезнования, DCT, мол не ломаются. Данное видео направило в правильное русло. Был перекос щеток движка коробки. Пробег 30тыс. Тихого дня, без пострілів, прилетів та рсзв.
@victorsturdivant4731 Жыл бұрын
Good vid but how do I know if it is necessary. My 17 Africa is stuck in neutral after 5 months. (Was having problems getting her to fire..... now running again) Any help appreciated.
@rowojtek Жыл бұрын
Thanks for the excellent instruction
@fahadalluhaibi Жыл бұрын
welcom to my nc750d 😘 kzread.info/head/PLteOcYmtZD1PqCabtg7J4lVlfYuPHO9KD
@johndonald3667 Жыл бұрын
My Honda CTX 700 will only go from neutral to first. Won’t shift out of first. Do you think that the shift motor could be causing this?
@alatannich803910 ай бұрын
Je voulais savoir si t’a trouvé le problème ?
@icklepob88 Жыл бұрын
Why the pointless magnet wrist strap ?
@IFinglikemymotorcycle6 ай бұрын
It was a gift from my wife and I forgot to take it off. I did keep 1-2 bits on it sometimes.
@GuidoHuwiler Жыл бұрын
Hi, thnks a lot for this helpful Video!. Can you tell me what kind of clean what do you use? Thx for answer
@IFinglikemymotorcycle6 ай бұрын
Normal chain cleaner. Sorry for the delayed reply.
@mcpoundsbilly7752 Жыл бұрын
Hello Sir, please why do I see engine oil inside my DCT control motor all the time I had it stack in 2nd gear ? Please help
@jazodda Жыл бұрын
I have the same issue with my VFR1200X DCT! 😓
@Marcotag-ip5nr7 ай бұрын
Did you solve the problem?
@jaqhok5585 Жыл бұрын
Hello, what is the front sprocket brand/name/type please? I like the rubber on it.
@yuriylenev4884 Жыл бұрын
For NC 700D Integra, is the shift control motor in the same place? With me, it often stays on 3, or 4, or 5 ... and I have to turn it off, and after 1 minute it starts and it fixes itself ... Is it from the shift control motor?
@alexanderbeyer1639Ай бұрын
Bei mir war es so ähnlich. reparier es.
@brandonroberts9717 Жыл бұрын
hey does anyone know if having a broken shift motor o ring could likely result in overheating or loss of connectivity? Cleaned mine and it still isn’t working but wondering if since I broke the o ring and put it back together the best I could when attaching if it is allowing too much moisture or heat from the engine to get inside.
@matthewread792 жыл бұрын
Where do you apply the lube?
@IFinglikemymotorcycle Жыл бұрын
Not necessary in the electric motor, but I used a little grease. The sealing ring and gear face should be oiled or greased before reassembly.
@matthewread792 жыл бұрын
What size torque wrench 🔧 is that?
@IFinglikemymotorcycle Жыл бұрын
The small 1/8 is 7-30 Nm, the large 1/2 is 30-210Nm.
@matthewread792 жыл бұрын
What is the spray you’re cleaning with?
@IFinglikemymotorcycle Жыл бұрын
Use what you use on the chain, but any chain cleaning spray will do.
@matthewread792 жыл бұрын
I’m having the same problem. Was thinking about buying a new shift motor and having someone replace it. But maybe I can do it myself?
@yigittosun46092 жыл бұрын
same happned to nc750xI was driving under the sun for 5 hours. sun was on the left of the motorbike now i understand that shft motor is over heated because of the angle of the sun and long riding. i waited like half hour it shifted N.
Пікірлер
This will probably help to my issue? I owned a honda ctx 700 dct 2014 and is stuck in 1st gear, and i only can drive in automatic mode, only drive in DS mode, not switch to manual mode and it stays in 1st gear when you reach 60km/h and reach the limit of rpm the bike limit itself) The old owner adquired in auction and the first 3 days was perfect, but he left this bike in a yard for 9 months exposed to the weather
Das Motorrad auf die linke Seite zu kippen und einzuschalten kann auch helfen. Bei mir zu 100% Prozent aber nur kurzfristig. Den Motor zu reinigen und die Rillen rauszuschleifen haben endgültig das DTC wieder zum laufen gebracht. Den schwarzen Stecker abzubekommen war das schwerste Problem. Kilometerstand 55000.
Buen video amigo yo ya tenía ese problema
최고입니다
The retaining clip you are messing with at 3:06, does it stay in good with a click or is it always wiggly and loose? Mine got damaged and I need to replace it.
The best chain replacement video
Is this a re-upload? Sure I watched this the other day 🤔
Yes, I corrected it, due to incorrect information.
Excellent. This is going to become the go to video for adjusting valves for this motorcycle. Excellent tutorial and video editing. I adjusted my valves a few years ago but I was bouncing around to different videos for reference, seems like each was not quit clear.
Just done exactly this. Worked perfect. Bike was stuck in 2nd gear. Turned off, wouldnt start. Battery was 100%. Cleaned and re fitted, worked. One thing to note (as others did) move the bike on the wheels. There is a speed sensor that typically likes to know the bike is moving before changing gear. Not always but it can help. Thanks man, owe you a beer 👍
Das Motorrad auf die linke Seite zu kippen und einzuschalten kann auch helfen. Bei mir zu 100% Prozent.
what parts of the parking brake would you recommend to do as a regular maintenance?
The usual cleaning when replacing brake pads. It hasn't been dismantled in 12 years, if it's in this condition it needs a complete overhaul.
I only need to change the slider. Do I have any chance or do I need to change everything?
Changed the front sprocket at 25k, figured I'd do this while in there. Broke the plastic casing trying to put the contact tips back in when reassembling. Rolled the dice and got about 100 miles until it went into limp mode a few miles from home. Couldn't rock'n'roll it back into neutral to get it started again. Hopefully a new shift motor ($237 with 1 day shipping) will rectify my mistake...
;( A müanyagok eléggé törékenyek sajnos. Sajnálom.
@@IFinglikemymotorcycle All good, life goes on :) put 1,000 miles on it last month with no issues.
Si señor!!!! Buen trabajo!!!! 👍🏻👍🏻
Brilliant. I could watch your videos all day long. Thanks 🤳
Отличная работа 💪👍🇺🇦
Good work !!! - Thanks !!!
I'm glad you liked it.
🏍 ;)
Szép munka!
Köszönöm. Azért a zsugorfóliázást kis odafigyeléssel megspórolhattam volna.
That's so satisfying to watch. Your Ultrasonic Cleaner does a brilliant job of cleaning up the parts. Thanks for Sharing. 🔧
Super film ,dziękuję. Pozdrawiam.
Sorry but can you list the products you used like the white bottle or at the bottom of the motor before you reassembled it and the sprays you used please thank you
Super.
Dziękuję.
Dziękuję.
Wow looks great. How do you stop the brake fluid draining out the system while the calliper is disconnected?
No way, but I did replace the brake hoses, that video will come later.
A joy to watch. Thanks for sharing. Those bleed valves are clever 🔧
Great video! It's shot and edited really well along with being informative the only thing is you need to correct the title as it's the front brake Caliper and not the rear.
Thank you for the correction. I will fix it.
Nice vedio i like it.
hey im having trouble finding the starter assembly are theses the same piece?
Ma quando si smonta il motorino bisogna far uscire tutto l'olio del motore? grazie.
You don't need to.Click to apply
nein
Brilliant! Thanks for posting! I’ve subscribed! Ride safe…
Thank you for the great video, I will indeed try that. But which spry are you using, is that a contact spray? Do you recommend something specific?
Merhaba bu shift motorunu nerden alabiliriz. Global internet pazarından
Nc750x dct 2015
Спасибо. Помогло. Все работает)))). Наилучшие пожелания из Украины.
Привіт Віктор, яка проблема була з DCT.
@@ROMABUSCADOR Залипала коробка при переключении на пониженную. Температура окружающей среды влияла на время проявления глюков. Чем теплее, тем быстрее зависание. Игры с маслом и адаптацией коробки =0. Оф дилеры - соболезнования, DCT, мол не ломаются. Данное видео направило в правильное русло. Был перекос щеток движка коробки. Пробег 30тыс. Тихого дня, без пострілів, прилетів та рсзв.
Good vid but how do I know if it is necessary. My 17 Africa is stuck in neutral after 5 months. (Was having problems getting her to fire..... now running again) Any help appreciated.
Thanks for the excellent instruction
welcom to my nc750d 😘 kzread.info/head/PLteOcYmtZD1PqCabtg7J4lVlfYuPHO9KD
My Honda CTX 700 will only go from neutral to first. Won’t shift out of first. Do you think that the shift motor could be causing this?
Je voulais savoir si t’a trouvé le problème ?
Why the pointless magnet wrist strap ?
It was a gift from my wife and I forgot to take it off. I did keep 1-2 bits on it sometimes.
Hi, thnks a lot for this helpful Video!. Can you tell me what kind of clean what do you use? Thx for answer
Normal chain cleaner. Sorry for the delayed reply.
Hello Sir, please why do I see engine oil inside my DCT control motor all the time I had it stack in 2nd gear ? Please help
I have the same issue with my VFR1200X DCT! 😓
Did you solve the problem?
Hello, what is the front sprocket brand/name/type please? I like the rubber on it.
For NC 700D Integra, is the shift control motor in the same place? With me, it often stays on 3, or 4, or 5 ... and I have to turn it off, and after 1 minute it starts and it fixes itself ... Is it from the shift control motor?
Bei mir war es so ähnlich. reparier es.
hey does anyone know if having a broken shift motor o ring could likely result in overheating or loss of connectivity? Cleaned mine and it still isn’t working but wondering if since I broke the o ring and put it back together the best I could when attaching if it is allowing too much moisture or heat from the engine to get inside.
Where do you apply the lube?
Not necessary in the electric motor, but I used a little grease. The sealing ring and gear face should be oiled or greased before reassembly.
What size torque wrench 🔧 is that?
The small 1/8 is 7-30 Nm, the large 1/2 is 30-210Nm.
What is the spray you’re cleaning with?
Use what you use on the chain, but any chain cleaning spray will do.
I’m having the same problem. Was thinking about buying a new shift motor and having someone replace it. But maybe I can do it myself?
same happned to nc750xI was driving under the sun for 5 hours. sun was on the left of the motorbike now i understand that shft motor is over heated because of the angle of the sun and long riding. i waited like half hour it shifted N.