I have a 2023 oxford white one. I live it. Just reached 8000 miles.
@blkgodisfurious32584 күн бұрын
Looks good I love the backsplash and countertops very cozy . How did you do your ceiling? Is that channel lighting? Good hands good job. 💯
@tamimahasan52096 күн бұрын
Hello, I was analyzed your YT channel and I saw that in your channel have some problems, that's why your channel is not growing. Your videos is not reaching to targeted people, not getting engagement. Do you want to know these problems? If you can give me permission I can tell here, . Where Can I tell? here or email? Anywhere I can tell if you give me permission. If you want to know, if you want to go so far with your channel. where? twitter, fb, ig etc.. where? waiting
@geraldraffe79916 күн бұрын
Wish I could post my 12 GS with the BB npp sound. Long tube no cats xpipe. The sound is night and day. Lol Old news
@edwinguzman34848 күн бұрын
Do you happen to know the diameter size for your Velgen Wheels center caps. Interseted in purchasing the VF5 for my 2023 5.0. But i would like to reuse or buy mustang logo center caps to retain that OEM look and feel. Thanks in advance.
@dksgarage60618 күн бұрын
I don't actually know but I do need to do a detailing on it so when I pull off the wheels I'll try to remember to measure
@edwinguzman34848 күн бұрын
@dksgarage6061 OK thanks please do if you can remember!
@TempleMuayThai9 күн бұрын
Looks pretty solid!
@bobbyposey412310 күн бұрын
Jeep is looking awesome!
@dksgarage60619 күн бұрын
Thanks! It's not easy to mod 3 different vehicles and have a full time job hahaha
@dg98adams10 күн бұрын
Hope your Quake Turn signals last longer than 3 months. I’m on my 3rd set of warranties lights. Now out of warranty (1 year).
@dksgarage606110 күн бұрын
@@dg98adams yeah I've heard stories of just about every brand. AAL, Quake, Rugged Ridge. None of them seem to last
@dg98adams10 күн бұрын
@@dksgarage6061 this last set I cut a relief in the bracket so the cord is not pushed into a hard 90 degree bend. We offroad so it could also be water intrusion. I have 2 sets to take apart and look into repairing. Good luck.
@SY80s_11 күн бұрын
Almost like you gained 40hp is crazy to say 😅 beautiful Z though.
@curtw999015 күн бұрын
Very nice
@saint_keeblerElf16 күн бұрын
Out of all the vids on YT I like your setup the best because it gives me a better reference of how it would look since I also have a white GC. I'm still trying to figure out how offset is supposed to work but you said you have +20 offset; isn't it supposed to be negative for it to stick out could you help explain? I want some wheels to stick out too just like yours. It looks brawny 👍🏼
@dksgarage606116 күн бұрын
Stock wheels are like +43 or something so the +20 with wider tires does stick out further. The closer you get to 0 the more it will stick out.
@saint_keeblerElf16 күн бұрын
@@dksgarage6061thanks for the quick response. Yeah I looked up what my current wheel (I have the OEM 20" wheels) and it says ET55. So its just moving down towards "0" from that number, you don't have to go to a negative number per say? And like you mentioned you had a little rubbing on the inner liner but no issue hitting the suspension component? And last Question, so for sure you need to purchase those new leveling/lifting air links because stock would cause an issue?. I see that you no longer have the vehicle so I thank you again for being able to answer my question(s) still. I Just bought my '15 GC ecodiesel with the quadra-lift a few months ago and am learning this whole new platform/setup
@dksgarage606116 күн бұрын
@@saint_keeblerElf yes I think you would need the level links if you were to go larger tire or a different offset wheel.
@michaelhartnett258816 күн бұрын
does it smell? being catless in all...
@Oliveryoung4418 күн бұрын
Does the .5" airlines in the rear allow you to use OR2, and could you use the 1" links on the rear as well and still use OR2?
@dksgarage606118 күн бұрын
I know the .5 allows for OR2 but not sure about the 1"?
@Funkblazer519 күн бұрын
What Are Your Offsets? I Love The Stance and Wanna Have The Same.
@dksgarage606119 күн бұрын
18x10 +30 & 19x12 +50
@mainpilot19 күн бұрын
I just ordered mine. I am chrome dipping it from the hull line up. Also removing the Yamaha Badge from the lower rear to give it a cleaner look. First stop will be the Tint shop to get the Windows done!
@nitrox2820 күн бұрын
I see that Kentucky license plate. I'm in Lexington and I'm looking for a reputable shop to install a 2.5" lift on my 2018 Grand Cherokee Limited. Any suggestions?
@dksgarage606120 күн бұрын
Absolutely.... checkout Kentucky Jeep and Truck in Elizabeth Town KY. They're awesome although closer to me than for you
@Benjix1325 күн бұрын
Are those the stock rims? If so what size tires ? Just got my tremor and need nice tires
Don't really need a lift kit!! looks mint those wheels
@MisterDimos28 күн бұрын
pretty sure I'm going to go with the side markers and rear cup holders. Thanks for the video!
@creecy28 күн бұрын
If I had access to drive into the back yard, this would be good. Here's an idea I saw on another video. This would allow you to not have to take the spare off. kzread.info/dash/bejne/h6lmq6-QlLSqp9o.html
@markdimmett646229 күн бұрын
You still running the spacer lift.
@dksgarage606129 күн бұрын
I sold this vehicle a while back. Should've kept it though
@wblife9120Ай бұрын
Hello my Friend nice car. I have the same car (22 GT/CS) but shadow black. How do those wheels feel as far as performance and ride quality? I used Eibach lowering springs so is there an issue with rubbing on yours? Thanks JC
@dksgarage6061Ай бұрын
No issues with rubbing until I was at high speed turns on the Tail of the Dragon in Nc. If you aren't doing any road coarse or autocross racing there isn't an issue. For me, I will be switching to the 275/35-20 when these are worn. As for the wheels: No issue
@wblife9120Ай бұрын
@@dksgarage6061 Hey Brother thanks for the information. No autocross and if I ever do I probably have a separate set of wheels and tires. I have spoken to Velgen and they do a 19 as well so ?? Decisions, decisions lol. It is fun fixing up my ride. So far tint, lowered, Corsa cold air, wheel spacers, and engine dress up(carbon fiber stuff cal pony cars) with the hood struts. So wheels next then Res delete but I like my active exhaust, and preps for boost. Looking forward to following you and my cars blue cousin lol.
@cutting_cornersАй бұрын
Congrats
@Ray-th3djАй бұрын
A 800 w kicker amp isn’t even 1 ohm stable so he’s doin the right thing. Shoulda fit two 8’s somehow lol then run em at 1 ohm and hope the amp handles it. They’d suck the power up
@Ray-th3djАй бұрын
It’s wired in series which is raising the impedance from .5 to 2 ohms. It’s a dual one ohm so either parallel it to .5 or series makes it 2 ohms. I like how he said “doubling the power” which is totally the opposite, he’s doubling the impedance which makes the amp/sub use and take less power. Idk if his amp could handle .5 ohms without going into protect. Most amps won’t unless they’re top of the line. 2 ohms on a kicker 8 is fine, hopefully he’ll be getting 200 or so watts to the sub.
@series9193Ай бұрын
Pass !!
@ArtD-14Ай бұрын
It "fits", if you call bolting it to the strut towers with two bolts on each side. Notice that its not bolted to the firewall area, which means its basically done nothing, except save ten pounds for about a grand. The stock set-up was stronger and thus far more functional.
@dksgarage6061Ай бұрын
FALSE. It is bolted to the firewall you just can't see it cause it's under the cowl cover. The stock piece was 2 pieces this is one combined design and it bolts in the exact same way.
@Lunablue2023Ай бұрын
When i buy this black stick in a front?
@Ocky3533Ай бұрын
Thanks for the video. I've got the stock NPP set-up with no other mods but am considering getting a B&B Fusion Bi-Modal system for a little more sound--but after watching this I'm not sure that's the way to go. Do you have an opinion of NPP vs B&B without the other mods? Thanks
@Daniels-kicks0728Ай бұрын
I have the same car but a dicast car lol
@live2fishofficialАй бұрын
Great idea! I may have to build this in my garage - thanks!
@harveyblankenship5203Ай бұрын
wish you knew what cam is in it. I'm looking for a streetable cam, no bucking or surging. and i would be happy with 550 whp
@disciplefn6727Ай бұрын
what size hole saw did you use?
@dksgarage6061Ай бұрын
The one that came with the kit, I'm not sure what size it was
@disciplefn6727Ай бұрын
@@dksgarage6061 i bought my kit used only reason for asking, i’m going to use a unibit and attempt to get it right
@pamilapotts4186Ай бұрын
Wow, Very nice! Love how clean it is inside, from ceiling to floor! The back opening up is also a great way to let the outside in! Looking forward to seeing the adventures your family will be taking! Happy Travels with the Beehive!
@pt_atxАй бұрын
Apex Forged VS-5RS are 17.4 lbs. with a load rating of 1600 lbs. Rears are 18lbs.
@dksgarage6061Ай бұрын
Yeah those were my other option.
@mikep1584Ай бұрын
Will it fit under the hood without rubbing on a standard hood. I have a 24 dark horse and am trying to find a brace that will fit with a whipple installed.
@dksgarage6061Ай бұрын
It will NOT fit with the stock hood. Too tall.
@mikep1584Ай бұрын
@@dksgarage6061do you know what the measurement is from top to bottom of the brace? It may fit underneath a 2024 hood but I’m not sure.
@dustinkeez1689Ай бұрын
Did you do anything to remedy the slight rubbing? Did you stay with the level kit? Or did you get the AirLinks lift?
@dksgarage6061Ай бұрын
I did the air links front and rear
@dustinkeez1689Ай бұрын
@@dksgarage6061 and that was the satisfactory remedy to eliminate the minor rub?
@setsunafseiei4099Ай бұрын
What year is your Mustang Gt. I was going to do it Also on my 2015 Roush Mustang Gt premium. But I didn't want to Risk it. Glad I found your video.
@dksgarage6061Ай бұрын
Mine is a 2022 GT/CS.
@setsunafseiei4099Ай бұрын
Thank you. It's not going to fit on my Roush. You just Saved me 900$.
@bobbyposey4123Ай бұрын
Like the ride brother!
@59ersfootballАй бұрын
House roof may need replacement soon?
@dksgarage6061Ай бұрын
Man I've tried the Insurance company after every storm for the last 2yrs. They send out an inspector and say it's structurally sound. They're right, no leaks at all...but it does look rough.
@59ersfootballАй бұрын
@@dksgarage6061I’m a property adjuster, so I notice those things. As long as there are no leaks, should be okay. Just gotta wait on that next big hail storm unfortunately. Love the new ride BTW
@bradcorbett90Ай бұрын
@@dksgarage6061 I was an engineer for the biggest manufacturer in asphalt shingles and I was a quality manager. The black stuff you see on your roof is algae. Even though it’s black, it’s from a form of blue-green algae. You can wash that off your roof but don’t use any chemicals that will impact your asphalt coating on the shingles. Harsh chemicals will cause the granules to wash away and will erode the asphalt layer on your shingles which will lead to leaks. Aesthetically it’s not ideal but it doesn’t cause any harm to your roof.
@grantgray17592 ай бұрын
Have you taken the tower off? trying to get my tower painted black
@dksgarage60612 ай бұрын
No I haven't yet.
@TheGunBrotha2 ай бұрын
nice - i was considering the swing storage but wondered if it would clear that cleat so good to know it does. Just got one myself and was debating walk around and mod vids even tho im not really a truck/car/garage channel. we will see
@juanhick21232 ай бұрын
Sir you repeated the tire section of the video. Watch it again.
@mikedoyle-rb4pj2 ай бұрын
Just Perfect, for what i like, i have a 2010 f 150 fx4 same color, 20 inch rims, with durotrac tires, you want to sell in 3 years let me know, ,im 67 yrs old but love the look,
@jamesw.69312 ай бұрын
I ordered the LG front and rear tow hooks and was preparing to install which led to your channel. I began with the rear as it would be easier, or so I thought. When installed the exhaust tips on my aftermarket BB cat-back exhaust system had less than a 1/4 inch per side. Since the mufflers are rubber mounted, they would surely be touching and damaging the exhaust tips over time, as I could easily push the mufflers into the rear tow hook. I removed it and sent it back. I'm about to install the front tow hook. If I can align the threaded/hook with an opening there will be no need to cut the grill. In the unlikely event I need a tow, I will simply thread the hook minus the nut into the frame-mounted portion and turn it in approximately 1/2 inch. The only reason for the nut would be if the hook was left installed so as not to vibrate out over time. You cannot beat a 10k drive-on lift anchored to a 6" deep concrete floor. There are videos of vehicles falling off two post lifts where the vehicle is not properly balanced. The only limiting factor with drive-on lifts in home garages, there is typically not enough ceiling height...
@cannonball6662 ай бұрын
Too much work to do what you did and ruining your console's interior space. I just swapped in the Kicker 6.5 sub and powered it with an amp it's more than enough.
@gasNmudtv2 ай бұрын
Coool. Nice to see my work in the wild. I designed and programmed the quality control program for this mag casting. F ing hated cutting up a bunch of them to measure for the engineers tests
@dksgarage60612 ай бұрын
Thank you for your hard work!! Quality piece, got it on the cheap off FB marketplace.
@Stuffandfangs2 ай бұрын
How's those heads holding up & how many miles are on em?
@Taino5.02 ай бұрын
Will it fit a 2015?
@dksgarage60612 ай бұрын
Yes it should as long as you have an aftermarket hood that's higher than stock
Пікірлер
Does price include trailer ?
@@therod785 it's been sold.
I have a 2023 oxford white one. I live it. Just reached 8000 miles.
Looks good I love the backsplash and countertops very cozy . How did you do your ceiling? Is that channel lighting? Good hands good job. 💯
Hello, I was analyzed your YT channel and I saw that in your channel have some problems, that's why your channel is not growing. Your videos is not reaching to targeted people, not getting engagement. Do you want to know these problems? If you can give me permission I can tell here, . Where Can I tell? here or email? Anywhere I can tell if you give me permission. If you want to know, if you want to go so far with your channel. where? twitter, fb, ig etc.. where? waiting
Wish I could post my 12 GS with the BB npp sound. Long tube no cats xpipe. The sound is night and day. Lol Old news
Do you happen to know the diameter size for your Velgen Wheels center caps. Interseted in purchasing the VF5 for my 2023 5.0. But i would like to reuse or buy mustang logo center caps to retain that OEM look and feel. Thanks in advance.
I don't actually know but I do need to do a detailing on it so when I pull off the wheels I'll try to remember to measure
@dksgarage6061 OK thanks please do if you can remember!
Looks pretty solid!
Jeep is looking awesome!
Thanks! It's not easy to mod 3 different vehicles and have a full time job hahaha
Hope your Quake Turn signals last longer than 3 months. I’m on my 3rd set of warranties lights. Now out of warranty (1 year).
@@dg98adams yeah I've heard stories of just about every brand. AAL, Quake, Rugged Ridge. None of them seem to last
@@dksgarage6061 this last set I cut a relief in the bracket so the cord is not pushed into a hard 90 degree bend. We offroad so it could also be water intrusion. I have 2 sets to take apart and look into repairing. Good luck.
Almost like you gained 40hp is crazy to say 😅 beautiful Z though.
Very nice
Out of all the vids on YT I like your setup the best because it gives me a better reference of how it would look since I also have a white GC. I'm still trying to figure out how offset is supposed to work but you said you have +20 offset; isn't it supposed to be negative for it to stick out could you help explain? I want some wheels to stick out too just like yours. It looks brawny 👍🏼
Stock wheels are like +43 or something so the +20 with wider tires does stick out further. The closer you get to 0 the more it will stick out.
@@dksgarage6061thanks for the quick response. Yeah I looked up what my current wheel (I have the OEM 20" wheels) and it says ET55. So its just moving down towards "0" from that number, you don't have to go to a negative number per say? And like you mentioned you had a little rubbing on the inner liner but no issue hitting the suspension component? And last Question, so for sure you need to purchase those new leveling/lifting air links because stock would cause an issue?. I see that you no longer have the vehicle so I thank you again for being able to answer my question(s) still. I Just bought my '15 GC ecodiesel with the quadra-lift a few months ago and am learning this whole new platform/setup
@@saint_keeblerElf yes I think you would need the level links if you were to go larger tire or a different offset wheel.
does it smell? being catless in all...
Does the .5" airlines in the rear allow you to use OR2, and could you use the 1" links on the rear as well and still use OR2?
I know the .5 allows for OR2 but not sure about the 1"?
What Are Your Offsets? I Love The Stance and Wanna Have The Same.
18x10 +30 & 19x12 +50
I just ordered mine. I am chrome dipping it from the hull line up. Also removing the Yamaha Badge from the lower rear to give it a cleaner look. First stop will be the Tint shop to get the Windows done!
I see that Kentucky license plate. I'm in Lexington and I'm looking for a reputable shop to install a 2.5" lift on my 2018 Grand Cherokee Limited. Any suggestions?
Absolutely.... checkout Kentucky Jeep and Truck in Elizabeth Town KY. They're awesome although closer to me than for you
Are those the stock rims? If so what size tires ? Just got my tremor and need nice tires
Yes stock rims kzread.info/dash/bejne/hZV7qauDYsS5dc4.htmlsi=-pZAYAorG4VGSiqZ
Don't really need a lift kit!! looks mint those wheels
pretty sure I'm going to go with the side markers and rear cup holders. Thanks for the video!
If I had access to drive into the back yard, this would be good. Here's an idea I saw on another video. This would allow you to not have to take the spare off. kzread.info/dash/bejne/h6lmq6-QlLSqp9o.html
You still running the spacer lift.
I sold this vehicle a while back. Should've kept it though
Hello my Friend nice car. I have the same car (22 GT/CS) but shadow black. How do those wheels feel as far as performance and ride quality? I used Eibach lowering springs so is there an issue with rubbing on yours? Thanks JC
No issues with rubbing until I was at high speed turns on the Tail of the Dragon in Nc. If you aren't doing any road coarse or autocross racing there isn't an issue. For me, I will be switching to the 275/35-20 when these are worn. As for the wheels: No issue
@@dksgarage6061 Hey Brother thanks for the information. No autocross and if I ever do I probably have a separate set of wheels and tires. I have spoken to Velgen and they do a 19 as well so ?? Decisions, decisions lol. It is fun fixing up my ride. So far tint, lowered, Corsa cold air, wheel spacers, and engine dress up(carbon fiber stuff cal pony cars) with the hood struts. So wheels next then Res delete but I like my active exhaust, and preps for boost. Looking forward to following you and my cars blue cousin lol.
Congrats
A 800 w kicker amp isn’t even 1 ohm stable so he’s doin the right thing. Shoulda fit two 8’s somehow lol then run em at 1 ohm and hope the amp handles it. They’d suck the power up
It’s wired in series which is raising the impedance from .5 to 2 ohms. It’s a dual one ohm so either parallel it to .5 or series makes it 2 ohms. I like how he said “doubling the power” which is totally the opposite, he’s doubling the impedance which makes the amp/sub use and take less power. Idk if his amp could handle .5 ohms without going into protect. Most amps won’t unless they’re top of the line. 2 ohms on a kicker 8 is fine, hopefully he’ll be getting 200 or so watts to the sub.
Pass !!
It "fits", if you call bolting it to the strut towers with two bolts on each side. Notice that its not bolted to the firewall area, which means its basically done nothing, except save ten pounds for about a grand. The stock set-up was stronger and thus far more functional.
FALSE. It is bolted to the firewall you just can't see it cause it's under the cowl cover. The stock piece was 2 pieces this is one combined design and it bolts in the exact same way.
When i buy this black stick in a front?
Thanks for the video. I've got the stock NPP set-up with no other mods but am considering getting a B&B Fusion Bi-Modal system for a little more sound--but after watching this I'm not sure that's the way to go. Do you have an opinion of NPP vs B&B without the other mods? Thanks
I have the same car but a dicast car lol
Great idea! I may have to build this in my garage - thanks!
wish you knew what cam is in it. I'm looking for a streetable cam, no bucking or surging. and i would be happy with 550 whp
what size hole saw did you use?
The one that came with the kit, I'm not sure what size it was
@@dksgarage6061 i bought my kit used only reason for asking, i’m going to use a unibit and attempt to get it right
Wow, Very nice! Love how clean it is inside, from ceiling to floor! The back opening up is also a great way to let the outside in! Looking forward to seeing the adventures your family will be taking! Happy Travels with the Beehive!
Apex Forged VS-5RS are 17.4 lbs. with a load rating of 1600 lbs. Rears are 18lbs.
Yeah those were my other option.
Will it fit under the hood without rubbing on a standard hood. I have a 24 dark horse and am trying to find a brace that will fit with a whipple installed.
It will NOT fit with the stock hood. Too tall.
@@dksgarage6061do you know what the measurement is from top to bottom of the brace? It may fit underneath a 2024 hood but I’m not sure.
Did you do anything to remedy the slight rubbing? Did you stay with the level kit? Or did you get the AirLinks lift?
I did the air links front and rear
@@dksgarage6061 and that was the satisfactory remedy to eliminate the minor rub?
What year is your Mustang Gt. I was going to do it Also on my 2015 Roush Mustang Gt premium. But I didn't want to Risk it. Glad I found your video.
Mine is a 2022 GT/CS.
Thank you. It's not going to fit on my Roush. You just Saved me 900$.
Like the ride brother!
House roof may need replacement soon?
Man I've tried the Insurance company after every storm for the last 2yrs. They send out an inspector and say it's structurally sound. They're right, no leaks at all...but it does look rough.
@@dksgarage6061I’m a property adjuster, so I notice those things. As long as there are no leaks, should be okay. Just gotta wait on that next big hail storm unfortunately. Love the new ride BTW
@@dksgarage6061 I was an engineer for the biggest manufacturer in asphalt shingles and I was a quality manager. The black stuff you see on your roof is algae. Even though it’s black, it’s from a form of blue-green algae. You can wash that off your roof but don’t use any chemicals that will impact your asphalt coating on the shingles. Harsh chemicals will cause the granules to wash away and will erode the asphalt layer on your shingles which will lead to leaks. Aesthetically it’s not ideal but it doesn’t cause any harm to your roof.
Have you taken the tower off? trying to get my tower painted black
No I haven't yet.
nice - i was considering the swing storage but wondered if it would clear that cleat so good to know it does. Just got one myself and was debating walk around and mod vids even tho im not really a truck/car/garage channel. we will see
Sir you repeated the tire section of the video. Watch it again.
Just Perfect, for what i like, i have a 2010 f 150 fx4 same color, 20 inch rims, with durotrac tires, you want to sell in 3 years let me know, ,im 67 yrs old but love the look,
I ordered the LG front and rear tow hooks and was preparing to install which led to your channel. I began with the rear as it would be easier, or so I thought. When installed the exhaust tips on my aftermarket BB cat-back exhaust system had less than a 1/4 inch per side. Since the mufflers are rubber mounted, they would surely be touching and damaging the exhaust tips over time, as I could easily push the mufflers into the rear tow hook. I removed it and sent it back. I'm about to install the front tow hook. If I can align the threaded/hook with an opening there will be no need to cut the grill. In the unlikely event I need a tow, I will simply thread the hook minus the nut into the frame-mounted portion and turn it in approximately 1/2 inch. The only reason for the nut would be if the hook was left installed so as not to vibrate out over time. You cannot beat a 10k drive-on lift anchored to a 6" deep concrete floor. There are videos of vehicles falling off two post lifts where the vehicle is not properly balanced. The only limiting factor with drive-on lifts in home garages, there is typically not enough ceiling height...
Too much work to do what you did and ruining your console's interior space. I just swapped in the Kicker 6.5 sub and powered it with an amp it's more than enough.
Coool. Nice to see my work in the wild. I designed and programmed the quality control program for this mag casting. F ing hated cutting up a bunch of them to measure for the engineers tests
Thank you for your hard work!! Quality piece, got it on the cheap off FB marketplace.
How's those heads holding up & how many miles are on em?
Will it fit a 2015?
Yes it should as long as you have an aftermarket hood that's higher than stock