Thank you! That worked. Spend 40 euro's 6 x to turn it off! Thank you so much
@martinclapton2724 Жыл бұрын
Just in time! Mines come up. 😊thanks
@maxbeshro3512 Жыл бұрын
Merci
@auddoc99 Жыл бұрын
Where did you buy the replacement ribbon cable?
@dennyj8650 Жыл бұрын
I'd also wrap the tater and mushrooms up tight - and use wire instead of zip ties! Heat enough to cook the tater is going to melt the zip tie. My truck's engine smells don't need to be on my food.
@raymonddick31192 жыл бұрын
Nice and to the point, just about to do mine on a 2000 Aero
@mbcsanpets72742 жыл бұрын
Amazing vedio
@imadeulook64262 жыл бұрын
That looks scrumptious to me although I prefer mashed with my steak 😋🥩🍽️
@yhird2 жыл бұрын
Outstanding. Great job!
@DMR7302 жыл бұрын
After removal, slice the bottom of the heat shield where the screw goes through approx 4 o'clock. Place new sensor in cavity, screw in bolt but do not tighten to allow heat shield to slide from top angle onto the screw. Tighten. This will make installation much easier.
@kenvaughn63792 жыл бұрын
Your patients is amazing!
@kenvaughn63792 жыл бұрын
Great video! Helped me out a lot .
@scarman14282 жыл бұрын
Steps are commented and not showed...stupid
@MrJoe51502 жыл бұрын
Thank you.
@grammysloth2 жыл бұрын
Loved your video 👍
@tring9202 жыл бұрын
wow nicely done... you had me at the stripped screw...gonna do this on my 2004 9-5 arc,,,,
@bengtmowitz50122 жыл бұрын
The most nail polish removers contains some sort of oil, for not drying out your nails! You should use either 98% alcohol or a electronic cleaner!
@vburji822 жыл бұрын
Great and honest video
@StuartCampbell014323 жыл бұрын
Finally someone who knows what they are doing!!!
@EASTENDGLEN3 жыл бұрын
good job girl, we need more gearhead chicks haha
@carattop3 жыл бұрын
Well, she's no JustinHiFi, but this method of pulling the spring tail forward, vs. pushing it to the side actually worked better for me than Justin's way. That little "click" sound is quite satisfying when you finally get it.
@goforitall02023 жыл бұрын
Major props girl!!!!!!!!!
@zonavarbondagoo40743 жыл бұрын
it's incredibly rare to find women interested in genuine classic cars - definitely not found anyone like this here in Australia. But being a Saab it's a proper classic.
@joseminchoca4773 жыл бұрын
Thanks for your video sweetheart I changed my yesterday and fix the issue on may saab 05. 95 turbo Thanks once again
@naddafi76923 жыл бұрын
Why did you change that? It haves mis fires?
@Nice453 жыл бұрын
I just want to thank you for making this video and guiding me in the right direction. Your amazing and are an angel! 🙏🏽
@chrisbartkowicz27593 жыл бұрын
maybe make it go into limp home mode..then film EXACTLY how you resolved it. only takes second to do and would help sooo many knowing EXACTLY what to do vs. just describing it verbally.
@richardangulo63033 жыл бұрын
Yea man what the hell I agree dam show us honey
@husainisyed77923 жыл бұрын
Great video. Thanks
@ShepherdTeam63 жыл бұрын
slot 2 on my 9-5 doesn't allow my spark to sit straight up, any idea why?
@nintendoatarikiller3 жыл бұрын
Thanks for uploading. I followed along (somewhat) and fixed my SID1. I didn't use any heat to put on the ribbon, just some tape.
@saabdashcamsweden44243 жыл бұрын
great work! genuine video
@Mike_Srt3 жыл бұрын
Thankyou in 2020👍👍
@jembojones75863 жыл бұрын
Ulgy shit
@krzehan4 жыл бұрын
Gorgeous!
@rammyx1214 жыл бұрын
had the cable on the wrong way....sorry, i had to laugh...
@yhird4 жыл бұрын
Well done. Great video.
@khalilcaldwell34824 жыл бұрын
Appreciate the video but feel sorry for you and your, “husband who likes cheap chocolate”. Wtf is that
@26Vincent264 жыл бұрын
6 years later, I have my own Saab. Tried to fix it, but my ribbon cable was too low quality, big rip. The screen is like your 2nd attempt, even after using heat, etc. Luckily I had a perfectly working back-up SID2 but the speaker does not work. Does not bother me too much. What I learnt: buy from the well known shops like pixelfix. People on KZread and Saab forums recommend it. Thanks anyway for making this video!
@michaelpyles10904 жыл бұрын
hey i am impressed with you and getting in there working on cars I am an auto tech contact me on facebook Michael pyles
@krishnachaichaiporn11614 жыл бұрын
Could you tell me where to buy the ribbon cable ? Thank you.
@apparaoapplanarasai36494 жыл бұрын
Fuucckkk
@Thehunter854 жыл бұрын
Thanks for the video. Anyway with so much anti sieze on NGK s.plugs you can trigger "engine light" code... NGK does not recommend use of anti sieze at all!
@tubeyou09254 жыл бұрын
Oh no... Hate to tell you 6 years later that the tool you needed was right in front of you the whole time. In the spare tire area, Saab provides a screw driver handle with 3 torx bits and a flat head. If you still have this car, or another saab, that screw driver is good for taking apart damn near the whole car. The entire interior at least... glove box, dash, console, etc. and definitely those screws you pointed out!
@pinkrainbowkennelz16404 жыл бұрын
"We have 1 that's mortally wounded I don't think it's going 2 survive the whole day." 🤤🤣
@1402teddybear4 жыл бұрын
Great job!!!!!!
@extension41305 жыл бұрын
Love seeing a woman do this. Wish more would do the same.
Пікірлер
❤❤❤❤❤👍👍👍👍👍
Awesome Job!
Omg I watched this 😳
Great video!
Thank you! That worked. Spend 40 euro's 6 x to turn it off! Thank you so much
Just in time! Mines come up. 😊thanks
Merci
Where did you buy the replacement ribbon cable?
I'd also wrap the tater and mushrooms up tight - and use wire instead of zip ties! Heat enough to cook the tater is going to melt the zip tie. My truck's engine smells don't need to be on my food.
Nice and to the point, just about to do mine on a 2000 Aero
Amazing vedio
That looks scrumptious to me although I prefer mashed with my steak 😋🥩🍽️
Outstanding. Great job!
After removal, slice the bottom of the heat shield where the screw goes through approx 4 o'clock. Place new sensor in cavity, screw in bolt but do not tighten to allow heat shield to slide from top angle onto the screw. Tighten. This will make installation much easier.
Your patients is amazing!
Great video! Helped me out a lot .
Steps are commented and not showed...stupid
Thank you.
Loved your video 👍
wow nicely done... you had me at the stripped screw...gonna do this on my 2004 9-5 arc,,,,
The most nail polish removers contains some sort of oil, for not drying out your nails! You should use either 98% alcohol or a electronic cleaner!
Great and honest video
Finally someone who knows what they are doing!!!
good job girl, we need more gearhead chicks haha
Well, she's no JustinHiFi, but this method of pulling the spring tail forward, vs. pushing it to the side actually worked better for me than Justin's way. That little "click" sound is quite satisfying when you finally get it.
Major props girl!!!!!!!!!
it's incredibly rare to find women interested in genuine classic cars - definitely not found anyone like this here in Australia. But being a Saab it's a proper classic.
Thanks for your video sweetheart I changed my yesterday and fix the issue on may saab 05. 95 turbo Thanks once again
Why did you change that? It haves mis fires?
I just want to thank you for making this video and guiding me in the right direction. Your amazing and are an angel! 🙏🏽
maybe make it go into limp home mode..then film EXACTLY how you resolved it. only takes second to do and would help sooo many knowing EXACTLY what to do vs. just describing it verbally.
Yea man what the hell I agree dam show us honey
Great video. Thanks
slot 2 on my 9-5 doesn't allow my spark to sit straight up, any idea why?
Thanks for uploading. I followed along (somewhat) and fixed my SID1. I didn't use any heat to put on the ribbon, just some tape.
great work! genuine video
Thankyou in 2020👍👍
Ulgy shit
Gorgeous!
had the cable on the wrong way....sorry, i had to laugh...
Well done. Great video.
Appreciate the video but feel sorry for you and your, “husband who likes cheap chocolate”. Wtf is that
6 years later, I have my own Saab. Tried to fix it, but my ribbon cable was too low quality, big rip. The screen is like your 2nd attempt, even after using heat, etc. Luckily I had a perfectly working back-up SID2 but the speaker does not work. Does not bother me too much. What I learnt: buy from the well known shops like pixelfix. People on KZread and Saab forums recommend it. Thanks anyway for making this video!
hey i am impressed with you and getting in there working on cars I am an auto tech contact me on facebook Michael pyles
Could you tell me where to buy the ribbon cable ? Thank you.
Fuucckkk
Thanks for the video. Anyway with so much anti sieze on NGK s.plugs you can trigger "engine light" code... NGK does not recommend use of anti sieze at all!
Oh no... Hate to tell you 6 years later that the tool you needed was right in front of you the whole time. In the spare tire area, Saab provides a screw driver handle with 3 torx bits and a flat head. If you still have this car, or another saab, that screw driver is good for taking apart damn near the whole car. The entire interior at least... glove box, dash, console, etc. and definitely those screws you pointed out!
"We have 1 that's mortally wounded I don't think it's going 2 survive the whole day." 🤤🤣
Great job!!!!!!
Love seeing a woman do this. Wish more would do the same.