Пікірлер

• 
  @queenofthepack-nr9mwАй бұрын

  What is the name of the spray you used

• 
  @BryanChumbersАй бұрын

  By any chance can I use this for a transformers toy I’m interested to do my own like flams for my transformer toy will it work

• 
  @AugustKling2 ай бұрын

  WTF Tattoo

• 
  @dimebag1082 ай бұрын

  Super cool video. I have a problem with my waterslide decals: they come off really easily after a couple of hours from laying down. Is it normal?

• 
  @dimebag1082 ай бұрын

  Super cool video. I have a problem with my Hayes waterslide decals: they come off really easily after a couple of hours from laying down. Is it normal?

• 
  @lilgeorge342 ай бұрын

  Thank you.

• 
  @HayesPaperCo2 ай бұрын

  You are welcome, we hope that this video was helpful and never doubt in contact us if you have any question.

• 
  @lilgeorge34Ай бұрын

  @@HayesPaperCo Thank you so much.

• 
  @lilgeorge34Ай бұрын

  Do you know the name of the paper that is used to print a logo on a t-shirts its has a clear shiny cover and you pull that away after printing onto the t-shirt.

• 
  @amberdanny20053 ай бұрын

  What does the resin do? I am having problems with the sublimation bleeding after putting the glue on them to add the stone

• 
  @rustyneuron4 ай бұрын

  Does that adhesive disk peel on both sides like double stick tape (sticky on both sides)? I bought a kit with all the parts and it came with those adhesive discs, but as far as I can see only one side peels off. Plus I can't figure out the purpose of the disc if glue is required anyway. Also what does UV glue do? I've been doing sublimation for awhile, but just got into earrings. So far I have only done the larger ones of various shapes (made from MDF), this is my first attempt at making the ones with the cabochon and tray, and I'm a little confused. Any suggestion for a more in depth source on making these? Any good facebook groups? But yeah, if you could tell me if those circles are supposed to be double sticky and how I am supposed to use them with the glue I would very much appreciate it. Thanks!

• 
  @tanybobbyhomeactivities80134 ай бұрын

  Simple and informative video thanks

• 
  @OzarkMountainGoats4 ай бұрын

  Can I spray with lacquer when dry

• 
  @MrIMacro5 ай бұрын

  Thanks, but i don't get it !! What is the difference between this and just putting a normal sticker?

• 
  @stephenaucoin65874 ай бұрын

  water slide can conform into tight cracks and crevices......stickers are a bit more robust

• 
  @sheryljones99585 ай бұрын

  I somewhere that you had to put it in the oven to set. Is that not true?

• 
  @ashkhun48275 ай бұрын

  thankyou!!

• 
  @MrBritrider5 ай бұрын

  What type of print rubs of easier, inkjet or laser? Should you apply a sealer over the printed decal before applying?

• 
  @littlequesadilla6 ай бұрын

  I may have missed in the description and/or it may be mentioned in the comments, but what printer/die-cutter is that you are using?

• 
  @s.i.s.t.m5 ай бұрын

  This is some kind of a Silhouette Portrait cutter

• 
  @kitchenbriks36857 ай бұрын

  I like how their demo decals had wrinkles in the reveal shot at the end 😂

• 
  @tambam786117 ай бұрын

  Are the cups dishwasher safe with waterslide?

• 
  @monicafoeller12518 ай бұрын

  Do I need to seal after applied?

• 
  @DaveFer9 ай бұрын

  I would love to be able to apply this to my woodworking between coats of CA finish. Does anyone know if this decal will withstand a CA (cyanoacrylate, superglue) or a shellac (alcohol-based) OVER it? What finish is recommended over top this material to protect it? If now finish is applied over it, would that be sustainable on the bottom of a wooden piece (against a table)?

• 
  @ilsy9 ай бұрын

  Hello this paper is gloss or mat? Thank you :)

• 
  @user-mj4oz6rl8z11 ай бұрын

  What the name of program ?

• 
  @abiromeroramirez Жыл бұрын

  Where can I get the Screen Print confetti? Thanks!

• 
  @Kabalb84 Жыл бұрын

  Is this always required? Because I printed on the paper and let the decals sit for about an hour and when I'm ready to use, I dip them in water, but as soon as they come up from the water the ink disappears and runs off the page! What am I doing wrong?

• 
  @chaoticneutral628211 ай бұрын

  Yes it is required to spray with clear coat for every decal waterslide papers

• 
  @daniellee653 Жыл бұрын

  Are these sprays the same as a gloss varnish?

• 
  @HayesPaperCo Жыл бұрын

  Hi Daniel, Varnish is different. You need to use a clear acrylic spray to seal inkjet waterslide decals, we have recommendations of products we have tested on our blog post, I'll add the link: www.hayespaper.com/blogs/blog/the-best-clear-sealants-to-use-on-waterslide-decal-paper

• 
  @user-blaster_2012 Жыл бұрын

  Do the images used to create decals on clear paper need to be transparent PNG images?? In the design stage i mean. Thanks

• 
  @HayesPaperCo Жыл бұрын

  Hi there, good question. It is best to save the image as a PNG to be on the safe side. If your printer doesn't print white ink (most do not) then any white space on your design will automatically show as clear once the design is printed. If you have a cream or light colored background then it will print as shown on your artwork. Hope this helps.

• 
  @user-blaster_2012 Жыл бұрын

  @@HayesPaperCo Ah yes, that's what i thought. Thanks for the reply!

• 
  @AirCrewRani Жыл бұрын

  Hi. I followed the packaging intsructions (sealed 3x and dried for more than 5 mins). My images still erased, wouldn't slide easily until it is entirely ruined. When I got a smaller piece transferred successfully, the tissue paper picked up the decal. I followed everything but why it is not working for me

• 
  @HayesPaperCo Жыл бұрын

  Hi there, Sorry to hear you are having trouble getting the decals to work. The best way for us to trouble shoot the issue is for you to email us at [email protected] with an image of the issue. Some things that immediately come to mind is 1. To check that your paper type inkjet or laser match the printer used? So inkjet waterslide can only be used with an inkjet printer. 2. Often the acrylic sealant can be the issue. We recommend Rust-Oleum® 2 x Clear. If the sealant is not waterproof it will run. 3. Make sure you coat the sealant evenly across the whole sheet and spray three times, you can dry with a hair drier for 5 minutes to set it if you are in a cooler climate. Hope this helps.

• 
  @reglovememe Жыл бұрын

  Can you tell me what you purchased your umbrella

• 
  @HayesPaperCo Жыл бұрын

  I believe it was Amazon. If you search sublimation blank umbrellas. Or white polyester umbrellas you should be able to find one that is similar. Happy creating!

• 
  @wandascott8664 Жыл бұрын

  Is the white good for dark green wine bottles? Also do you always have to trim with scissors? I'm putting cork lighting. Thx

• 
  @HayesPaperCo Жыл бұрын

  Hi Wanda, The white waterslide decal will create a white, opaque backing for the decal so it will make the print easier to read or see but it may block the cork lighting. If you use a clear decal the decal will be transparent and when backlit you will see the design through the light. The clear decal may be difficult to see if there is no light on behind it, so it just depends on the look you're going for. Hope this helps.

• 
  @helenpalka733 Жыл бұрын

  Thanks!

• 
  @ItsSoLikeSabrina Жыл бұрын

  This paper is kinda bad. I’ve had this paper for a year and my inkjet can never detect it in my printer spits it out.

• 
  @HayesPaperCo Жыл бұрын

  Hi There, sorry to hear you're having issues with the paper in the printer. Please email us at [email protected] and we'll get you printing it.

• 
  @sammcd65 Жыл бұрын

  What resin do you use?

• 
  @HayesPaperCo Жыл бұрын

  Hi Sam, we purchased the sublimation blankearrings already with the bubble resin top which made this a lot easier. Hope this helps.

• 
  @ellenvelazquez454 Жыл бұрын

  Where do you buy the supplies to make them?

• 
  @HayesPaperCo Жыл бұрын

  Hi Ellen, You can buy the sublimation paper from our website: www.hayespaper.com/collections/sublimation-paper The other supplies are available from your local craft store, Amazon or craft online supply store. Let us know if there is something specific you can't find and we'll try to send you a link.

• 
  @christineallen9888 Жыл бұрын

  Sadly these didn’t work for my application on glass blocks. I tried both the transparent and white inkjet decal paper, spraying the decals 3 times with Krylon clear acrylic spray. My decals were roughly 5 x 6”. The colors on the transparent decals weren’t vibrant enough, even after adding another layer per Hayes’ customer support recommendation. Then I tried the white inkjet paper and although it was sprayed with clear acrylic spray, the colors separated as the decal was “stretched” onto the glass block, making the image look grainy. I’ve resorted to printable vinyl to get the result I was hoping to get with the waterslide decals.

• 
  @HayesPaperCo Жыл бұрын

  Hi Christine, Sorry to hear this didn't work for your application. Feel free to email us at [email protected] if you need more assistance.

• 
  @heidycruz6 Жыл бұрын

  I bought 2 pack of this brand few months ago. At first paper look good. But then the paper have some white stripes all over the sheet. Does this paper gets dry or the gloss goes away , if not use during certain time?

• 
  @HayesPaperCo Жыл бұрын

  Hi there, Waterslide decal paper should last for a long time, it is possible that it's appearance changes overtime due to how it is stored. We recommend to store it out of the sun in a dry area. Try printing the paper and see if the "white stripes" are visible in the design. If they are affecting your decal, please email us at [email protected] and we'll help get you a replacement or troubleshoot the issue. :)

• 
  @heidycruz6 Жыл бұрын

  @@HayesPaperCo thank you

• 
  @pietpompiepompiepiet940 Жыл бұрын

  Very nice video thanks

• 
  @HayesPaperCo Жыл бұрын

  Thank you, we are glad you enjoyed it. :)

• 
  @pietpompiepompiepiet940 Жыл бұрын

  @@HayesPaperCo hi. I see you use Krylon adhesive before sublimating, does it leave any residue that you must clean afterwards

• 
  @HayesPaperCo Жыл бұрын

  @@pietpompiepompiepiet940 yes I do clean off any residue after sublimation.

• 
  @rajmaks Жыл бұрын

  Hi there :) Can you provide the model of the cutter? I can't find it myself.

• 
  @therealfuzzytexananimalres5106 Жыл бұрын

  Good morning, in this video we used a Silhouette Cameo 2. :)

• 
  @rajmaks Жыл бұрын

  Thank you :) It's your fault I just bought a Cameo 4

• 
  @jennifermcdowell731 Жыл бұрын

  how long after spraying the repositionable spray on the sublimation printed paper do you wait to press, and temp is 110 F for 40 seconds?

• 
  @HayesPaperCo Жыл бұрын

  Good evening, for the video it was a few mins after I sprayed that I placed the sublimation discs however I usually spray and place immediately. I pressed them at 410 degrees Fahrenheit for 40 seconds. Hope this helps. If you decide to make some please share the finished products with us. :)

• 
  @pietpompiepompiepiet940 Жыл бұрын

  @@HayesPaperCo good day. I sublimate blank key chains but see that you use Krylon adhesive for sticking the earings before sublimation, can i do the same procedure for keychains instead of using cellotape(the coper colour heat resistant)

• 
  @HayesPaperCo Жыл бұрын

  @@pietpompiepompiepiet940 @PietPompie PompiePiet good evening :) Yes absolutely. Actually, I will post a video of me doing a keychain so you can see how well it works. I'll try to have it loaded by Tuesday.

• 
  @butchzaborniak33342 жыл бұрын

  is that a semi-gloss paper? i have the matte paper but wanted to try a glossy type if available

• 
  @HayesPaperCo2 жыл бұрын

  Hi there, in this video the name is done using our matte version and the baseball threads in the corners was done with our glossy paper. :)

• 
  @butchzaborniak3334 Жыл бұрын

  @@HayesPaperCo ill be sure to order some next paycheck thanks btw,is it a high gloss or a sarin gloss? i couldnt tell on my phone

• 
  @solidkreate50072 жыл бұрын

  What cutter is that?

• 
  @HayesPaperCo2 жыл бұрын

  Hi there, In this video the silhouette Cameo is shown.

• 
  @lynnedee12 жыл бұрын

  I made some decals for painted wood items. I sprayed them with Krylon triple-thick clear glaze. The first one I used was fine, but then I had to take a break for several months to deal with some things, and when I got back to applying the decals, they all cracked. Is there a way to salvage them, or should I start over, and spray them just before using?

• 
  @HayesPaperCo2 жыл бұрын

  Good afternoon, Sorry to hear your decals cracked. I use Rustoleum 2X Clear and can use decals that have sat for a bit of time. Maybe try sealing them one more time prior to using, but with your sealant you may need to print them and start again. However, I would say try giving them a new fresh clear coat and see if that works prior to starting over. Let us know how it goes. :)

• 
  @lynnedee12 жыл бұрын

  @@HayesPaperCo Thank you, I'll try that - and I'll keep you posted!

• 
  @lynnedee12 жыл бұрын

  @@HayesPaperCo Well, spraying the decals again (I did two coats) did the trick! Thank you! I used the Krylon spray, since I still have some. The only thing that was different from any other application I've ever done, was that the decals shrank a little while soaking in the water. But it didn't affect my project, I was just happy that I can use the decals I've already made. I will be switching to the Rustoleum 2X Clear for future projects.

• 
  @HayesPaperCo2 жыл бұрын

  @@lynnedee1 so glad everything worked out well. We are always happy to help. Feel free to share your creations with us by tagging us on our social media platforms. We love seeing all the projects y'all do. :)

• 
  @ibecruisinibecruisin2 жыл бұрын

  Thank you for the informative video, but you need to reduce the volume of your background music.

• 
  @HayesPaperCo2 жыл бұрын

  I'm glad you found the video informative. And we thank you for your feedback.

• 
  @Marek-is8ii Жыл бұрын

  strategy gamner

• 
  @maxinesealey89272 жыл бұрын

  Very nice 👍🏽

• 
  @jeremycole3002 жыл бұрын

  Thank you for this! I've been searching for an hour and you cleared this up super easy.

• 
  @michaelbell89142 жыл бұрын

  Just add to your instruction, worked great for me. Thank you.

• 
  @michaelbell89142 жыл бұрын

  you forgot to add that after printing and before using water you need to seal your print with clear coat. Your company recomends 3 coats. I found this out the hard way. Just a heads up. NOOB mistake.

• 
  @HayesPaperCo2 жыл бұрын

  Yes, you are correct, with inkjet paper sealing with three coats of clear coat is required. This video was to focus on the application how to. We do have how to seal and full step by step guide videos as well. :)

• 
  @thegoddess41722 жыл бұрын

  Hello. What printer are you using? Thank you

• 
  @HayesPaperCo2 жыл бұрын

  For the laser paper I use a Brother laser printer. For inkjet paper I use a Canon Pixma. It will be your preference which printer you like. :)

• 
  @powelly8312 жыл бұрын

  I'm in UK what would be best acrylic spray to use as I've looked online and it maybe named something different over here? Thank you

• 
  @badgeunderground69362 жыл бұрын

  So clear water slide is perfect for white mugs? Love the content

• 
  @HayesPaperCo2 жыл бұрын

  Yes the clear really is perfect for white mugs and other white surfaces. :)

• 
  @fathomrl2 жыл бұрын

  Thank you! You have earned a like!

• 
  @HayesPaperCo2 жыл бұрын

  Thank you :)

• 
  @chinuedoll18272 жыл бұрын

  How do you cure it ?

• 
  @HayesPaperCo2 жыл бұрын

  Waterslide decals will cure naturally over a period of time. Depending on temp humidity etc its usually 36-48 hours.