That looks like a very aspirationally sized odometer
@charlieoctogirl23 күн бұрын
Phoooar! Nice!!
@dandelion4454 Жыл бұрын
9:57 it's always best practice to grease your shaft before you put the cover back on.
@danielortizdecaracas Жыл бұрын
Please help me how to format 720 kb floppy disc
@mybestfriendjacob Жыл бұрын
I'm a little confused and hopefully you can clear this up.... This allows you to go from FL Studio MIDI out 1 into the mio10... which then goes from the output into all your synths.... & in FL Studio you can control all of your synths by giving each MIDI out inside FL Studio a different number?
@VRMS_VRMS_VRMS Жыл бұрын
Actually, the mio appears as a load of separate midi devices in FL but you can also send what's going to on port to other ports, it's very flexible.
@stepansoukup8571 Жыл бұрын
I found an old, dirty floppy disk drive in an even older, dirtier PC from my dad's work and wanted to restore it, you have no idea how helpful this was! I managed to get it working again! I have a few more of them, I hope they'll work again :D
@charlieoctogirl Жыл бұрын
So great to see where you are. Thank you for sharing! Great lil tour. Hope you both are on the mend real soon. Xx
@JeffMarraccini Жыл бұрын
Rest well! Sorry that you both are not feeling well.
@ifeelsqueaky Жыл бұрын
Thanks for the tour! Hope you both start feeling better very soon 💜
@sleepdeprivedjuicebox Жыл бұрын
all the feels 🖤 I'm so proud of you doing the adventuring! 🖤✨
@JeffMarraccini Жыл бұрын
Looking forward to your arrival! You both have been through so much already.
@PHAESTOS64 Жыл бұрын
Remarkable achievement......it took only 15 minutes.....
@Arricc Жыл бұрын
Don't be strangers. Except, you know, allowing for your normal levels of strange!
@SlaserX2 жыл бұрын
Fantastic video, definitely picking one up now
@chrismartin66902 жыл бұрын
How are you ,have you moved now ?
@VRMS_VRMS_VRMS2 жыл бұрын
Not yet! Still waiting on the sale. Think it's close!
@chrismartin66902 жыл бұрын
Hope it all goes well, I loved your vid on the Mio device..I bought one when they first came out….I am now retired..and have just reconfigured it….again etc..still is the best..I might get the newer one as well as I am running out of ports…I use the auracle config
@chrismartin66902 жыл бұрын
Are you on any synth fb groups
@VRMS_VRMS_VRMS2 жыл бұрын
@@chrismartin6690 Nah, I mostly stay off FB, too much toxicity!
@chrismartin66902 жыл бұрын
@@VRMS_VRMS_VRMS have a look at my ytube channel.. I just like making a noise.. And I find music really food for my well being.. In fact it s the best let out of feeling like meditation.. You zone out... All the best to you
@chrismartin66902 жыл бұрын
Hi, great vid and explanation…I have one got it when they first came, I now have the auracle config software… it is still the best I believe
@JeffMarraccini2 жыл бұрын
Glad you are feeling better, and hope Becca feels better soon!
@dyst0pia772 жыл бұрын
Unfortunately we’ve had to give our Koko and Petra up last year. kzread.info/dash/bejne/Y22fz86anr3VlLg.html
@dyst0pia772 жыл бұрын
KZread algo informed me of a disturbance in the force! We’ve just relocated to Singapore three weeks ago with our little girl. Best of luck with your new adventures! It’ll be a grand new story. Roy.
@VRMS_VRMS_VRMS2 жыл бұрын
Ha! I was just thinking of you and the crew - Found a couple of CreamTone stickers whilst I was packing, they're now applied (as is appropriate) to my flightcases :D Glad to hear you're adventuring too!
@JeffMarraccini2 жыл бұрын
Whew, so glad on the house! Best to B and you!
@charliemcneill3982 жыл бұрын
Awww travel alter! For the weirdo on the move <3 Great video dude!
@JeffMarraccini2 жыл бұрын
Best wishes to you three! Safe travels to your amazing Cat!
@spooksgallery14472 жыл бұрын
Water. Wash your holes. 🖤🖤🖤
@SanguineBrah2 жыл бұрын
I worked out that you can use a Biro lid to reliably remove the plastic faceplate without damaging anything. Just wedge the clip part into the hole and it should pop off nicely. Because it's a soft plastic tool, there's no danger of mangling the plastic faceplate like you would get with a screwdriver.
@zone-magazine2 жыл бұрын
Really awesome!
@VRMS_VRMS_VRMS2 жыл бұрын
Many thanks! ^_^
@AlistairMaxwell772 жыл бұрын
great video . whats jitter like?
@BlueEyeTableRockLake2 жыл бұрын
I have a FDD on my Kawai Piano that will not let me insert a disk. What would keep it from going in?
@VRMS_VRMS_VRMS2 жыл бұрын
It differs from drive to drive, but sometimes the issue will be that the spring & arm mechanism that opens up the disk windows as you slide the disk in can get corroded or dirty and seize up. Usually if you get the drive out and open it up you'll be able to see what's sticking and it'll just need a good clean and lubrication.
@DrSpungiform2 жыл бұрын
I came here for MIDI and Iconnectivity… I leave needing some closure on your garden? Wtf is going on out there?!
@calikali24202 жыл бұрын
Excellent review!!! Thank You for all the detail!!!
@nilsonbarbaro2 жыл бұрын
My VoodooLab Ground Control Pro Foot Controller stops responding, sending MIDI messages after 5 minutes of use, i don't know why this happens every time ! Do you think this MIDI Box could solve this problem of MIDI messages errors, weak signals and latency ?
@VRMS_VRMS_VRMS2 жыл бұрын
Sounds like the issue is in the controller itself; I'd suggest hoking it up to a computer and using something like MIDI-OX (www.midiox.com/) to check what's actually coming out of it..
@pcretropcworkshop80312 жыл бұрын
wow good information
@isadoreiris2 жыл бұрын
Thank you for posting this link. I love this track!!
@FantasticF1132 жыл бұрын
I know I'm late to the party (and this piece of gear has been discontinued) but I wanted to let you know this is a great video. Well done VRMS
@jacintonegro3 жыл бұрын
Great Review, Clean your Yard Bro, it looks like Hurricane Katrina just happened backthere.
@VRMS_VRMS_VRMS3 жыл бұрын
Given how much people seem to enjoy observing it, I think I may have to start the Untidy Yard Channel...
@KevinStCroix3 жыл бұрын
I don't give a shart what his backyard looks like, he just crushed this damn review and walk-through. iConnectivity should being paying to have his yard landscaped because they dropped the ball on presenting how to set this device up.
@KevinStCroix3 жыл бұрын
In the studio 8:02 Setup software 10:54
@montxsuz3 жыл бұрын
Helpful video! Thanks for that. Although the Mio10 is now discontinued, it put me on to the MioXL. I need a MIDI interface upgrade and was about to get the Motu Express XT (in-spite of the reported ongoing SYSEX problems - because what else is still out there?) - until I discovered your video. Two things that got my attention immediately: USB input and Ethernet. I have synth gear from pre-Midi (CV), MIDI, USB eras, and even 3.5mm to Midi DIN (adapter). Being able to connect most through one hub will be a big advantage. How reliable has your iConnectivity gear (hardware and software) been? Question I have at the moment is what is the difference between AVB and RTP? Eg MOTU and PreSonus uses AVB networking (I have a MOTU AVB switch and Audio Interfaces). Is the iConnectivity compatible with the AVB Switch, or will I have to plug it into a normal ethernet switch? I cannot find an answer through google, but I assume the latter. Will any conflicts result? I assume the computer can handle the different protocols through different host software. I also use Steinberg (Cubase) and other software on Windows 10. Also I assume the mioXL can be used in stand-alone mode without a computer - something I need ocassionally to connect my legacy hardware synths together without a PC.
@glorkspangle3 жыл бұрын
Cake Shop Boys
@DktrJ3 жыл бұрын
Damn you, you talented maggot-farmer! I'm now going to spend approximately 7 days trying to remember what this reminds me of before admitting that I chuffing well love this song! Miss ya rivetheed. Love, Auld goff x
@anthonyjuniper-nine73783 жыл бұрын
great video - great track - good job
@JeffMarraccini3 жыл бұрын
Great video and fantastic tune!
@shadowblue4263 жыл бұрын
Awesome Tune :)
@VirtualGothNight3 жыл бұрын
I'm getting an odd Delicatessen vs Hostel vibe
@VRMS_VRMS_VRMS3 жыл бұрын
I think I was aiming more for Greggs vs. Rustlers
@papas_lapas3 жыл бұрын
Ave fan eh?
@ioanadanci6683 жыл бұрын
Atbqbh4d d
@iubf13 жыл бұрын
hey ! Links are dead now... can u find the seller again ? pleaaaase :D
@squishmusic3 жыл бұрын
@10.13, how do I know if my drive heads cant be manually moved to check the stepper-motor-spindle works ok (I can hand turn it to lube), but afterwards (with power on), nothing moves/heads just stutter...
@edglue61383 жыл бұрын
Sort your garden fella
@xenotiic83564 жыл бұрын
In my case, the disc rotation motor is what needs lubrication, not the stepper motor. Would wd-40 work or should I use lithium grease?
@JeffMarraccini4 жыл бұрын
Thank you so much! Your review clinched my strategy.
@mmmmvermillion4 жыл бұрын
I was just trying to repair/clean my floppy drive and the stepper motor just drives the lead screw forward so that the reader moves all the way. The motor continues to push forward the reader in spurts causing the reader to click loudly at the end of the lead screw. Why would this be the case and will tapping the stepper motor be the solution possibly? Not sure why the stepper motor would continue to try and push the reader forward repeatedly.
@squishmusic3 жыл бұрын
I have a similar problem, the heads just move just a little and their is a grunt from the lead screw/stepper motor. Is mine dead? (this was post-lubing)
Пікірлер
That looks like a very aspirationally sized odometer
Phoooar! Nice!!
9:57 it's always best practice to grease your shaft before you put the cover back on.
Please help me how to format 720 kb floppy disc
I'm a little confused and hopefully you can clear this up.... This allows you to go from FL Studio MIDI out 1 into the mio10... which then goes from the output into all your synths.... & in FL Studio you can control all of your synths by giving each MIDI out inside FL Studio a different number?
Actually, the mio appears as a load of separate midi devices in FL but you can also send what's going to on port to other ports, it's very flexible.
I found an old, dirty floppy disk drive in an even older, dirtier PC from my dad's work and wanted to restore it, you have no idea how helpful this was! I managed to get it working again! I have a few more of them, I hope they'll work again :D
So great to see where you are. Thank you for sharing! Great lil tour. Hope you both are on the mend real soon. Xx
Rest well! Sorry that you both are not feeling well.
Thanks for the tour! Hope you both start feeling better very soon 💜
all the feels 🖤 I'm so proud of you doing the adventuring! 🖤✨
Looking forward to your arrival! You both have been through so much already.
Remarkable achievement......it took only 15 minutes.....
Don't be strangers. Except, you know, allowing for your normal levels of strange!
Fantastic video, definitely picking one up now
How are you ,have you moved now ?
Not yet! Still waiting on the sale. Think it's close!
Hope it all goes well, I loved your vid on the Mio device..I bought one when they first came out….I am now retired..and have just reconfigured it….again etc..still is the best..I might get the newer one as well as I am running out of ports…I use the auracle config
Are you on any synth fb groups
@@chrismartin6690 Nah, I mostly stay off FB, too much toxicity!
@@VRMS_VRMS_VRMS have a look at my ytube channel.. I just like making a noise.. And I find music really food for my well being.. In fact it s the best let out of feeling like meditation.. You zone out... All the best to you
Hi, great vid and explanation…I have one got it when they first came, I now have the auracle config software… it is still the best I believe
Glad you are feeling better, and hope Becca feels better soon!
Unfortunately we’ve had to give our Koko and Petra up last year. kzread.info/dash/bejne/Y22fz86anr3VlLg.html
KZread algo informed me of a disturbance in the force! We’ve just relocated to Singapore three weeks ago with our little girl. Best of luck with your new adventures! It’ll be a grand new story. Roy.
Ha! I was just thinking of you and the crew - Found a couple of CreamTone stickers whilst I was packing, they're now applied (as is appropriate) to my flightcases :D Glad to hear you're adventuring too!
Whew, so glad on the house! Best to B and you!
Awww travel alter! For the weirdo on the move <3 Great video dude!
Best wishes to you three! Safe travels to your amazing Cat!
Water. Wash your holes. 🖤🖤🖤
I worked out that you can use a Biro lid to reliably remove the plastic faceplate without damaging anything. Just wedge the clip part into the hole and it should pop off nicely. Because it's a soft plastic tool, there's no danger of mangling the plastic faceplate like you would get with a screwdriver.
Really awesome!
Many thanks! ^_^
great video . whats jitter like?
I have a FDD on my Kawai Piano that will not let me insert a disk. What would keep it from going in?
It differs from drive to drive, but sometimes the issue will be that the spring & arm mechanism that opens up the disk windows as you slide the disk in can get corroded or dirty and seize up. Usually if you get the drive out and open it up you'll be able to see what's sticking and it'll just need a good clean and lubrication.
I came here for MIDI and Iconnectivity… I leave needing some closure on your garden? Wtf is going on out there?!
Excellent review!!! Thank You for all the detail!!!
My VoodooLab Ground Control Pro Foot Controller stops responding, sending MIDI messages after 5 minutes of use, i don't know why this happens every time ! Do you think this MIDI Box could solve this problem of MIDI messages errors, weak signals and latency ?
Sounds like the issue is in the controller itself; I'd suggest hoking it up to a computer and using something like MIDI-OX (www.midiox.com/) to check what's actually coming out of it..
wow good information
Thank you for posting this link. I love this track!!
I know I'm late to the party (and this piece of gear has been discontinued) but I wanted to let you know this is a great video. Well done VRMS
Great Review, Clean your Yard Bro, it looks like Hurricane Katrina just happened backthere.
Given how much people seem to enjoy observing it, I think I may have to start the Untidy Yard Channel...
I don't give a shart what his backyard looks like, he just crushed this damn review and walk-through. iConnectivity should being paying to have his yard landscaped because they dropped the ball on presenting how to set this device up.
In the studio 8:02 Setup software 10:54
Helpful video! Thanks for that. Although the Mio10 is now discontinued, it put me on to the MioXL. I need a MIDI interface upgrade and was about to get the Motu Express XT (in-spite of the reported ongoing SYSEX problems - because what else is still out there?) - until I discovered your video. Two things that got my attention immediately: USB input and Ethernet. I have synth gear from pre-Midi (CV), MIDI, USB eras, and even 3.5mm to Midi DIN (adapter). Being able to connect most through one hub will be a big advantage. How reliable has your iConnectivity gear (hardware and software) been? Question I have at the moment is what is the difference between AVB and RTP? Eg MOTU and PreSonus uses AVB networking (I have a MOTU AVB switch and Audio Interfaces). Is the iConnectivity compatible with the AVB Switch, or will I have to plug it into a normal ethernet switch? I cannot find an answer through google, but I assume the latter. Will any conflicts result? I assume the computer can handle the different protocols through different host software. I also use Steinberg (Cubase) and other software on Windows 10. Also I assume the mioXL can be used in stand-alone mode without a computer - something I need ocassionally to connect my legacy hardware synths together without a PC.
Cake Shop Boys
Damn you, you talented maggot-farmer! I'm now going to spend approximately 7 days trying to remember what this reminds me of before admitting that I chuffing well love this song! Miss ya rivetheed. Love, Auld goff x
great video - great track - good job
Great video and fantastic tune!
Awesome Tune :)
I'm getting an odd Delicatessen vs Hostel vibe
I think I was aiming more for Greggs vs. Rustlers
Ave fan eh?
Atbqbh4d d
hey ! Links are dead now... can u find the seller again ? pleaaaase :D
@10.13, how do I know if my drive heads cant be manually moved to check the stepper-motor-spindle works ok (I can hand turn it to lube), but afterwards (with power on), nothing moves/heads just stutter...
Sort your garden fella
In my case, the disc rotation motor is what needs lubrication, not the stepper motor. Would wd-40 work or should I use lithium grease?
Thank you so much! Your review clinched my strategy.
I was just trying to repair/clean my floppy drive and the stepper motor just drives the lead screw forward so that the reader moves all the way. The motor continues to push forward the reader in spurts causing the reader to click loudly at the end of the lead screw. Why would this be the case and will tapping the stepper motor be the solution possibly? Not sure why the stepper motor would continue to try and push the reader forward repeatedly.
I have a similar problem, the heads just move just a little and their is a grunt from the lead screw/stepper motor. Is mine dead? (this was post-lubing)