@@Jus10worsT Appreciate the love ❤️! Crazy about the assassination attempt on Trump.
@Jus10worsT17 сағат бұрын
@@Styxx2018 I know man really I don’t trust any politician and don’t really get to far into debating people but let the people vote. taking away Their chance to vote for someone through assassination attempt is truly a threat to democracy.
@Antley278Күн бұрын
Guys i really dont recommend snooping arounf in your dads room, last time i did... Well lets just say i found some latex balloons
@Styxx2018Күн бұрын
@@Antley278 😛🫣😅
@Styxx2018Күн бұрын
@@Antley278 That's awesome!!!
@PFOZ-nf7xpКүн бұрын
Stay out of dads room
@Styxx2018Күн бұрын
@@PFOZ-nf7xp 🫣😅😄
@Jus10worsTКүн бұрын
I’m so jealous right now! I’m stealing it when we go to the beach 😂😂
@Styxx2018Күн бұрын
@@Jus10worsT @@Jus10worsT We can drop in at the gun range first, then head over to Clearwater Beach or a drive to Miami!! 😎
@GoGators2300Күн бұрын
@@Styxx2018 Ooh!! Me too! I am not too far away!
@user-zg5cq3cm1iКүн бұрын
I'm down for Clearwater Beach!
@user-zg5cq3cm1iКүн бұрын
That is a CLEAN rifle! What is the length?
@Styxx2018Күн бұрын
@@user-zg5cq3cm1i It is a 10.5" SBR. It was my 3rd AR15 I built from scratch. It 🏃♂️ 🏃♀️ 🏃♀️ so smooth 😎!! Almost as loud as my 7.5" lil' Thumper. Thanks, again!!!
@evos469Күн бұрын
Put it back
@Styxx2018Күн бұрын
@@evos469 Good one!! Thanks for watching 👀!
@AmmoAlchemistКүн бұрын
Nice af broski!
@Styxx2018Күн бұрын
@@AmmoAlchemist Thank you, Bro! I'll trade it for daily gun range days!!!! 🤣😂 I truly appreciate you watching my shenanigans on YT!
@AmmoAlchemistКүн бұрын
😎❤️🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🫡
@iamacog29892 күн бұрын
Why, just way post this stupid post. Get off my feed.
@_AzMo_2 күн бұрын
Boy you're grounded
@Styxx20182 күн бұрын
@@_AzMo_ Thanks for taking the time to watch and leaving a comment.
@daftalliancemedia64082 күн бұрын
"even"
@Styxx20182 күн бұрын
@@daftalliancemedia6408 Even? Thanks for watching 👀!
@DookeyRidr2 күн бұрын
Why not just get the tomahawk?
@Styxx20182 күн бұрын
@@DookeyRidr It wasn't available at the time when I bought it. When this launched, the Tomahawks were the older models and only available in silver in the U.S. Plus, when I bought it, no one in the U.S. had BUL Armory in stock; everything came directly out of Miami, FL. Heck, my Custom Glock Barrel maker had my Axe FS Hatchet for over 6 months before I got it back a few months ago. Well worth the wait, as the custom barrel measures 5" to the comp opening, making it my longest (and therefore) my softest shooting pistol. Thanks for watching 👀 and leaving a comment.
@DookeyRidr2 күн бұрын
@@Styxx2018 ah, got it. Cool video still.
@Styxx20182 күн бұрын
@@DookeyRidr I truly appreciate you!
@JulianMChung2 күн бұрын
That’s a bust down glockiana
@user-zg5cq3cm1i2 күн бұрын
Glockiana? What does that mean? Must be a Sig guy. 🤣 Don't let your pistol accidentally go off. Another case a couple of months ago...kzread.info/dash/bejne/jGuf1ZeEm9rgpZs.html
@GoGators23002 күн бұрын
That is one of the cleanest custom Glock build I have seen. The only cleaner pistol... the one he has with the Radian Afterburner on it!
@Styxx20182 күн бұрын
Thanks!!
@thecarpenter25992 күн бұрын
What makes it alright to be snooping around yer dad's room?
@Styxx20182 күн бұрын
It is just a sound bite. Thank you for watching! I truly appreciate it.
@GoGators23003 күн бұрын
These sound clips!!! 🤣😂😋
@Styxx20182 күн бұрын
Right!
@user-zg5cq3cm1i3 күн бұрын
The age of compensators and ports! 😅
@Styxx20182 күн бұрын
For sure!
@JJ-zd8be3 күн бұрын
カッコいい!
@Jus10worsT3 күн бұрын
Lazer Beam 😂😂
@GoGators23003 күн бұрын
😝😜😜
@Jus10worsT3 күн бұрын
@@GoGators2300 bring in the lazer beam…
@AmmoAlchemist4 күн бұрын
🇺🇸🫡❤️
@JJ-zd8be4 күн бұрын
カッコいい!
@Styxx20183 күн бұрын
Thank you!
@02xtera4 күн бұрын
So it’s a question of having the V8 ports or not. No significant benefits to have the ported barrel, other than having it being slightly flatter shooting and louder with concussion attributes and constant exterior barrel difficulty cleaning.
@Styxx20183 күн бұрын
Thanks for the input!!!
@Fo4assaultriflefan924 күн бұрын
I thought this was a dr.phil voiceover for a sec
@Styxx20184 күн бұрын
@@Fo4assaultriflefan92 Holy crap! I does sound like Dr. Phil!!!! Good ear!
@AmmoAlchemist4 күн бұрын
Dope af!
@Styxx20184 күн бұрын
@@AmmoAlchemist Thank you, sir!!!
@TacticalAnimal5 күн бұрын
Be right there, Mom!😂
@user-zg5cq3cm1i5 күн бұрын
"No. Put your toys away. Dinner is ready!!" 😅🤣😂
@Styxx20185 күн бұрын
@@user-zg5cq3cm1i How people come up with this stuff?!! Love ❤️ it!!!!
@Jus10worsT5 күн бұрын
Man it sucks being opp-less 😂😂
@Styxx20185 күн бұрын
@@Jus10worsT 😄 After your comment about my Subs, I started to look at the analytics behind the growth. It was quite obvious the reach was due to the Shorts. The Shorts provide for Impressions, which the thumbnails provide the opportunities for Views. Hopefully, the Views lead to Subs. Shorts seem to lose traction after a couple days, though. So, I think 2A Ninja's advice of frequent Shorts has some weight. Just a theory, so I wanted to test it with this Short.
@Jus10worsT5 күн бұрын
@@Styxx2018 I’ve noticed it has a lot to do with the sound you use. If it’s a popular sound I get 6-12k views if the sound doesn’t have a lot of remixes it doesn’t get any views. But like you said I’m just here for a good time and to make friends. I enjoy making people laugh and if I help someone get through a rough day that’s more than enough for me.
@Styxx20185 күн бұрын
@@Jus10worsT Yes! I noticed that about your Shorts, as well. Hence, this particular sound clip. I am pretty sure you used it, which I wanted to Remix!!! 🤘 Can't wait to see your next Short, Brother!!!!
@GoGators23005 күн бұрын
@@Styxx2018 I am sure any mention of or tags to 2A material will get pushed down by algorithms, limiting the amount of eyeballs on your stuff.
@OTMLAWNCARE5 күн бұрын
This world is cooked😂 this some shit out a movie
@worldofsportshd19045 күн бұрын
Is this 4.5 inch or 5 inch?
@Styxx20185 күн бұрын
@@worldofsportshd1904 It is Flushed Crown cut, taking length down to 4.0 inches.
@AmmoAlchemist5 күн бұрын
Nice af
@Styxx20185 күн бұрын
Thanks for watching!! I want a "FULL AUTO" like you have!
@AmmoAlchemist5 күн бұрын
@Styxx2018 that's not mine bud lol
@AmmoAlchemist5 күн бұрын
@Styxx2018 I've just gained access to a gang of firearms since starting this channel also reloading ammo is the closest thing u can get to a real life unlimited ammo cheat
@Styxx20185 күн бұрын
@@AmmoAlchemist Regardless, super badass to shoot FULL AUTO!!!
@02xtera5 күн бұрын
I just couldn’t take the V8 ports, it was louder and there’s slight concussion factor idk I guess I’m not a ported barrel guy. So I’ve sold the Tac Pro 5” and got the non ported 5” version. This model still shoots flat, steel frame, 9mm in a 5” slide you can’t loose. Cleaning that ported barrel was a pain in the a$$ as well.
@Styxx20185 күн бұрын
It is definitely LOUDER, but I haven't had the guts to shoot it indoors yet. I am sure you didn't have any problems selling the PRO version. And, boy, you are not wrong about cleaning it! 🤣
@AmmoAlchemist5 күн бұрын
I can never get comps to work
@Styxx20185 күн бұрын
I think comps have spoiled me, in terms of looking for the softest shooting guns.
@AmmoAlchemist5 күн бұрын
You got a clean af collection bro
@Styxx20185 күн бұрын
Thank you. Most tell me I have a problem! 😆😅🤣😂
@Styxx20185 күн бұрын
If you haven't already, please check out my longer format videos. I would truly appreciate it.
@AmmoAlchemist5 күн бұрын
I needa get a 2011 that one is nice af
@Styxx20185 күн бұрын
BUL Armory makes QUALITY pistols at a great price. They should be coming out with the TAC Comp around this time next year.
@AmmoAlchemist5 күн бұрын
That's clean af!
@Styxx20185 күн бұрын
I appreciate it! I have put 3000+ rounds through it, and it keeps running. There was a time, I ran it too fast that the suppressor started glowing! I am a little surprised I haven't blown the gas block/tube with all the gas coming back at me.
@dannypierce14266 күн бұрын
Why does everybody shit on aero precision so hard I mean it’s not exactly Anderson manufacturing. It’s not straight junk some of those upper and lower sets that they have are bad ass. Some of the color schemes they have I mean are dope if it runs, who are we to judge and talk about the next man I thought it was pretty kool I’d have it in my collection and I think I do have one arrow in my collection and I have a big collection
@Styxx20186 күн бұрын
I find it funny people pick on the lower, especially since most lowers are made from 7075-T6 aircraft aluminum. Aero Precision's machining is exceptional. But, no one really dumps on people's upper, which strength and durability is more important. The best uppers are usually forged 7075-T6 aluminum. Barrel should be CHF steel. FN makes awesome barrels. Unless you are Military/LEO, forged rifles are really unnecessary. Thank you for watching and commenting. I truly appreciate the discussion!
@ARP_king5.566 күн бұрын
That guy is a legen fr 😂😂😅😂
@Styxx20186 күн бұрын
I was just telling my wife that if Sheriff Grady Judd ever runs for President, I would vote for him. Everyone loves him in FL!!! We love his "How to catch a Predator" press conference!
@ARP_king5.565 күн бұрын
@@Styxx2018 yes I definitely will too , i love FL i have family in kissimmee florida and i also been outt there i love it , they do a good job
@TacticalAnimal6 күн бұрын
Im 🏃🏽♂️➡️🏃🏽♂️➡️🏃🏽♂️➡️😂
@Styxx20186 күн бұрын
@@TacticalAnimal These sound clips people use are AWESOME! I can't help but laugh when I hear that voice. 🤣
@TacticalAnimal6 күн бұрын
🔥🔥🔥beauty
@Styxx20186 күн бұрын
@@TacticalAnimal Thank you for watching 👀! I am already telling myself NOT to buy next years model. 😅
@Styxx20186 күн бұрын
@@TacticalAnimal Check out my other video... kzread.info/dash/bejne/Z46tlJiGfaetdbQ.html
@Artisticpatina6 күн бұрын
Lame
@Styxx20186 күн бұрын
@@Artisticpatina I know, I know. But, I thought the sound clip was HILARIOUS and had to share! Thanks for 👀 though! Hopefully you aren't as rude to your customers.
@user-wl7zb1pl8l6 күн бұрын
The muscle guns!!! And 1 hell of a piece..... Love it! Wonder what it cost now a days😁😉✌
@Styxx20186 күн бұрын
@@user-wl7zb1pl8l The Ported one set me back around $2500, after tax. My wife is still mad at me! 🤫
@AmmoAlchemist6 күн бұрын
I just bought a ep9 bcg to replace mine that broke when a case blew up on me bad reload
@Styxx20186 күн бұрын
Are you okay? 🙏 that you didn't get hurt.
@AmmoAlchemist5 күн бұрын
@Styxx2018 yes I'm fine ty! I'm waiting on that bcg rn lol was hoping it'd get here early
@Styxx20185 күн бұрын
@AmmoAlchemist Thank goodness! Hope your BCG comes in soon.
@AmmoAlchemist5 күн бұрын
@@Styxx2018 just got it imma post about it
@Styxx20185 күн бұрын
Hell yeah!! I'll be watching 👀 out for it!
@tirkgae43066 күн бұрын
🤦I’m dead home build with aero lower 😂
@socialmedia55346 күн бұрын
All lower receivers are the same. Money is spent on the barrel and trigger. Nothing more Nothing less, just people trying to justify their over priced builds
@Styxx20186 күн бұрын
@@socialmedia5534 AMEN! I have put over 3000+ rounds through it. Even with it suppressed, I am finding little wear and the tolerances are still great! My friend has an FN 15, and I went shot for shot with similar MOA.
@Styxx20186 күн бұрын
I built a AR15 with a BCM stripped lower and it was just okay. Not sure why the hype. My opinion, Aero Precision is better quality than BCM, yet people think highly of it.
@Styxx20186 күн бұрын
@@tirkgae4306 BTW... I have built over 20+ rifles, shot tens of thousands rounds through them, and THANK GOD, I have not experienced any failures.
@GoGators23006 күн бұрын
...all we need now is a scene from John Wick or something!!! 🔥🔥🔥🔥🔥!!!
@Styxx20183 күн бұрын
Thank you!!
@jessiekjames29187 күн бұрын
Now , That’s some *Tramp 💩!!! * Not to be CornFused with trump !!!
@Delta-Alpha-Kilo7 күн бұрын
Did grinding that mounting screw fix your problem? I had to grind the screw for one of my Glocks so short that I'm worried about how little thread engagement I have left. This is on a direct-milled slide that got butchered by a supposedly reputable gunsmith. Fortunately, it's a competition-only gun, not an EDC, so I'm not too upset.
@Styxx20187 күн бұрын
It did (so far)! I have gone 3 times since, putting around 200 rounds each trip. No issues! But, I realized the aluminum trigger shoe I put in gets really hot when running a bunch of rounds through in quick succession. Thank you so much for watching! That was the first me speaking on one of my videos; possibly the last! 😆
@iss74517 күн бұрын
Trying to argue that an aero with a holosun, isn’t anything more than an affordable mid tear rifle is wild.
@Styxx20187 күн бұрын
@@iss7451 You caught the sarcasm! Louis Vuitton anything is stupid! Sorry for the click bait. But, I do appreciate you viewing the short. I was trying to make light of what one of the local Sheriff's in FL said and used the sound clip. But, do YOU have an AR15 that costs more than $3000 to build that can back up YOUR argument? Are you military, Contractor/Operator, or LEO with first hand experience?First, Aero Precision is an OEM manufacturer of gun parts, so you'll be surprised which gun makers uses Aero Precision for its parts. Second, I would put any of my Holosuns against an EOTech anyday. I am confident it will hold its own.
@Styxx20187 күн бұрын
You know... I have been contemplating the argument between Top Tier vs. Mid Tier vs. Low Tier setups. To me, it is about quality for a good price. I am a novice when it comes to firearms. I only started this hobby in 2019, reading manuals and watching videos about building AR15s. But, unlike many, I have built many rifles from stripped parts. I have used parts from Geissele, BCM, Aero Precision, PSA, Ballistic Advantage, Anderson Manufacturing, and many others. I have built over 20+ rifles for myself and friends. All of them still work and perform great to this day. I boil it down to grade of aluminum (or steel), tolerances of parts, Quality Control, and quality of metal finish. Machining also sets Manufacturers apart from the middle of the pack. I'll be honest... I don't understand the hype around BCM. Don't get me wrong, they produce quality parts. But, they lack design. Geissele is nice, but I don't get the price justification. I own a couple of triggers and other small parts. I went to the long range recently and had the pleasure of shooting next to a gentleman with a Geissele Super Duty. Coincidentally we both had steel plates set at 100 yards. I had a 10" plate with a 3" center plate and he had a 8" single plate. We both took our shots...about 100+ rounds each. I had one of my Aero Precision builds vs his Geissele Super Duty. I never missed on the 3" steel, as well as had a similar grouping as his Geissele. I will also mention the gentleman had several Mikes, and I missed none. I also had the pleasure of taking on my friend's FN 15 against my suppressed 10.5" Aero Precision. Again, my Aero Precision had a similar MOA as his Top Tier FN 15 rifle. Even suppressed, I believe my ejection pattern was more consistent with my Aero Precision than his FN 15. So, to consider something as Top Tier, what does that really mean? Especially since my Aero Precision is consistently holding it's own against Top Tier rifles?
@user-zg5cq3cm1i7 күн бұрын
PREACH!!!
@Styxx20187 күн бұрын
@@user-zg5cq3cm1i Jus' sayin'
@user-zg5cq3cm1i6 күн бұрын
@@Styxx2018 The sound clip is CLASSIC!!!
@Jus10worsT7 күн бұрын
Gotta love Florida!
@Styxx20187 күн бұрын
@@Jus10worsT Louis Vuitton! People are so ridiculous!! I actually saw someone Cerakote the GUCCI logo on their Glock. Died laughing.
@user-zg5cq3cm1i6 күн бұрын
LOL! Tell them, Brotha! Not goin' to lie, I would vote for Grady Judd for PRESIDENT!!!!
Пікірлер
I need my Stixx Fix! get to work 😂😂😂
@@Jus10worsT Appreciate the love ❤️! Crazy about the assassination attempt on Trump.
@@Styxx2018 I know man really I don’t trust any politician and don’t really get to far into debating people but let the people vote. taking away Their chance to vote for someone through assassination attempt is truly a threat to democracy.
Guys i really dont recommend snooping arounf in your dads room, last time i did... Well lets just say i found some latex balloons
@@Antley278 😛🫣😅
@@Antley278 That's awesome!!!
Stay out of dads room
@@PFOZ-nf7xp 🫣😅😄
I’m so jealous right now! I’m stealing it when we go to the beach 😂😂
@@Jus10worsT @@Jus10worsT We can drop in at the gun range first, then head over to Clearwater Beach or a drive to Miami!! 😎
@@Styxx2018 Ooh!! Me too! I am not too far away!
I'm down for Clearwater Beach!
That is a CLEAN rifle! What is the length?
@@user-zg5cq3cm1i It is a 10.5" SBR. It was my 3rd AR15 I built from scratch. It 🏃♂️ 🏃♀️ 🏃♀️ so smooth 😎!! Almost as loud as my 7.5" lil' Thumper. Thanks, again!!!
Put it back
@@evos469 Good one!! Thanks for watching 👀!
Nice af broski!
@@AmmoAlchemist Thank you, Bro! I'll trade it for daily gun range days!!!! 🤣😂 I truly appreciate you watching my shenanigans on YT!
😎❤️🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🫡
Why, just way post this stupid post. Get off my feed.
Boy you're grounded
@@_AzMo_ Thanks for taking the time to watch and leaving a comment.
"even"
@@daftalliancemedia6408 Even? Thanks for watching 👀!
Why not just get the tomahawk?
@@DookeyRidr It wasn't available at the time when I bought it. When this launched, the Tomahawks were the older models and only available in silver in the U.S. Plus, when I bought it, no one in the U.S. had BUL Armory in stock; everything came directly out of Miami, FL. Heck, my Custom Glock Barrel maker had my Axe FS Hatchet for over 6 months before I got it back a few months ago. Well worth the wait, as the custom barrel measures 5" to the comp opening, making it my longest (and therefore) my softest shooting pistol. Thanks for watching 👀 and leaving a comment.
@@Styxx2018 ah, got it. Cool video still.
@@DookeyRidr I truly appreciate you!
That’s a bust down glockiana
Glockiana? What does that mean? Must be a Sig guy. 🤣 Don't let your pistol accidentally go off. Another case a couple of months ago...kzread.info/dash/bejne/jGuf1ZeEm9rgpZs.html
That is one of the cleanest custom Glock build I have seen. The only cleaner pistol... the one he has with the Radian Afterburner on it!
Thanks!!
What makes it alright to be snooping around yer dad's room?
It is just a sound bite. Thank you for watching! I truly appreciate it.
These sound clips!!! 🤣😂😋
Right!
The age of compensators and ports! 😅
For sure!
カッコいい!
Lazer Beam 😂😂
😝😜😜
@@GoGators2300 bring in the lazer beam…
🇺🇸🫡❤️
カッコいい!
Thank you!
So it’s a question of having the V8 ports or not. No significant benefits to have the ported barrel, other than having it being slightly flatter shooting and louder with concussion attributes and constant exterior barrel difficulty cleaning.
Thanks for the input!!!
I thought this was a dr.phil voiceover for a sec
@@Fo4assaultriflefan92 Holy crap! I does sound like Dr. Phil!!!! Good ear!
Dope af!
@@AmmoAlchemist Thank you, sir!!!
Be right there, Mom!😂
"No. Put your toys away. Dinner is ready!!" 😅🤣😂
@@user-zg5cq3cm1i How people come up with this stuff?!! Love ❤️ it!!!!
Man it sucks being opp-less 😂😂
@@Jus10worsT 😄 After your comment about my Subs, I started to look at the analytics behind the growth. It was quite obvious the reach was due to the Shorts. The Shorts provide for Impressions, which the thumbnails provide the opportunities for Views. Hopefully, the Views lead to Subs. Shorts seem to lose traction after a couple days, though. So, I think 2A Ninja's advice of frequent Shorts has some weight. Just a theory, so I wanted to test it with this Short.
@@Styxx2018 I’ve noticed it has a lot to do with the sound you use. If it’s a popular sound I get 6-12k views if the sound doesn’t have a lot of remixes it doesn’t get any views. But like you said I’m just here for a good time and to make friends. I enjoy making people laugh and if I help someone get through a rough day that’s more than enough for me.
@@Jus10worsT Yes! I noticed that about your Shorts, as well. Hence, this particular sound clip. I am pretty sure you used it, which I wanted to Remix!!! 🤘 Can't wait to see your next Short, Brother!!!!
@@Styxx2018 I am sure any mention of or tags to 2A material will get pushed down by algorithms, limiting the amount of eyeballs on your stuff.
This world is cooked😂 this some shit out a movie
Is this 4.5 inch or 5 inch?
@@worldofsportshd1904 It is Flushed Crown cut, taking length down to 4.0 inches.
Nice af
Thanks for watching!! I want a "FULL AUTO" like you have!
@Styxx2018 that's not mine bud lol
@Styxx2018 I've just gained access to a gang of firearms since starting this channel also reloading ammo is the closest thing u can get to a real life unlimited ammo cheat
@@AmmoAlchemist Regardless, super badass to shoot FULL AUTO!!!
I just couldn’t take the V8 ports, it was louder and there’s slight concussion factor idk I guess I’m not a ported barrel guy. So I’ve sold the Tac Pro 5” and got the non ported 5” version. This model still shoots flat, steel frame, 9mm in a 5” slide you can’t loose. Cleaning that ported barrel was a pain in the a$$ as well.
It is definitely LOUDER, but I haven't had the guts to shoot it indoors yet. I am sure you didn't have any problems selling the PRO version. And, boy, you are not wrong about cleaning it! 🤣
I can never get comps to work
I think comps have spoiled me, in terms of looking for the softest shooting guns.
You got a clean af collection bro
Thank you. Most tell me I have a problem! 😆😅🤣😂
If you haven't already, please check out my longer format videos. I would truly appreciate it.
I needa get a 2011 that one is nice af
BUL Armory makes QUALITY pistols at a great price. They should be coming out with the TAC Comp around this time next year.
That's clean af!
I appreciate it! I have put 3000+ rounds through it, and it keeps running. There was a time, I ran it too fast that the suppressor started glowing! I am a little surprised I haven't blown the gas block/tube with all the gas coming back at me.
Why does everybody shit on aero precision so hard I mean it’s not exactly Anderson manufacturing. It’s not straight junk some of those upper and lower sets that they have are bad ass. Some of the color schemes they have I mean are dope if it runs, who are we to judge and talk about the next man I thought it was pretty kool I’d have it in my collection and I think I do have one arrow in my collection and I have a big collection
I find it funny people pick on the lower, especially since most lowers are made from 7075-T6 aircraft aluminum. Aero Precision's machining is exceptional. But, no one really dumps on people's upper, which strength and durability is more important. The best uppers are usually forged 7075-T6 aluminum. Barrel should be CHF steel. FN makes awesome barrels. Unless you are Military/LEO, forged rifles are really unnecessary. Thank you for watching and commenting. I truly appreciate the discussion!
That guy is a legen fr 😂😂😅😂
I was just telling my wife that if Sheriff Grady Judd ever runs for President, I would vote for him. Everyone loves him in FL!!! We love his "How to catch a Predator" press conference!
@@Styxx2018 yes I definitely will too , i love FL i have family in kissimmee florida and i also been outt there i love it , they do a good job
Im 🏃🏽♂️➡️🏃🏽♂️➡️🏃🏽♂️➡️😂
@@TacticalAnimal These sound clips people use are AWESOME! I can't help but laugh when I hear that voice. 🤣
🔥🔥🔥beauty
@@TacticalAnimal Thank you for watching 👀! I am already telling myself NOT to buy next years model. 😅
@@TacticalAnimal Check out my other video... kzread.info/dash/bejne/Z46tlJiGfaetdbQ.html
Lame
@@Artisticpatina I know, I know. But, I thought the sound clip was HILARIOUS and had to share! Thanks for 👀 though! Hopefully you aren't as rude to your customers.
The muscle guns!!! And 1 hell of a piece..... Love it! Wonder what it cost now a days😁😉✌
@@user-wl7zb1pl8l The Ported one set me back around $2500, after tax. My wife is still mad at me! 🤫
I just bought a ep9 bcg to replace mine that broke when a case blew up on me bad reload
Are you okay? 🙏 that you didn't get hurt.
@Styxx2018 yes I'm fine ty! I'm waiting on that bcg rn lol was hoping it'd get here early
@AmmoAlchemist Thank goodness! Hope your BCG comes in soon.
@@Styxx2018 just got it imma post about it
Hell yeah!! I'll be watching 👀 out for it!
🤦I’m dead home build with aero lower 😂
All lower receivers are the same. Money is spent on the barrel and trigger. Nothing more Nothing less, just people trying to justify their over priced builds
@@socialmedia5534 AMEN! I have put over 3000+ rounds through it. Even with it suppressed, I am finding little wear and the tolerances are still great! My friend has an FN 15, and I went shot for shot with similar MOA.
I built a AR15 with a BCM stripped lower and it was just okay. Not sure why the hype. My opinion, Aero Precision is better quality than BCM, yet people think highly of it.
@@tirkgae4306 BTW... I have built over 20+ rifles, shot tens of thousands rounds through them, and THANK GOD, I have not experienced any failures.
...all we need now is a scene from John Wick or something!!! 🔥🔥🔥🔥🔥!!!
Thank you!!
Now , That’s some *Tramp 💩!!! * Not to be CornFused with trump !!!
Did grinding that mounting screw fix your problem? I had to grind the screw for one of my Glocks so short that I'm worried about how little thread engagement I have left. This is on a direct-milled slide that got butchered by a supposedly reputable gunsmith. Fortunately, it's a competition-only gun, not an EDC, so I'm not too upset.
It did (so far)! I have gone 3 times since, putting around 200 rounds each trip. No issues! But, I realized the aluminum trigger shoe I put in gets really hot when running a bunch of rounds through in quick succession. Thank you so much for watching! That was the first me speaking on one of my videos; possibly the last! 😆
Trying to argue that an aero with a holosun, isn’t anything more than an affordable mid tear rifle is wild.
@@iss7451 You caught the sarcasm! Louis Vuitton anything is stupid! Sorry for the click bait. But, I do appreciate you viewing the short. I was trying to make light of what one of the local Sheriff's in FL said and used the sound clip. But, do YOU have an AR15 that costs more than $3000 to build that can back up YOUR argument? Are you military, Contractor/Operator, or LEO with first hand experience?First, Aero Precision is an OEM manufacturer of gun parts, so you'll be surprised which gun makers uses Aero Precision for its parts. Second, I would put any of my Holosuns against an EOTech anyday. I am confident it will hold its own.
You know... I have been contemplating the argument between Top Tier vs. Mid Tier vs. Low Tier setups. To me, it is about quality for a good price. I am a novice when it comes to firearms. I only started this hobby in 2019, reading manuals and watching videos about building AR15s. But, unlike many, I have built many rifles from stripped parts. I have used parts from Geissele, BCM, Aero Precision, PSA, Ballistic Advantage, Anderson Manufacturing, and many others. I have built over 20+ rifles for myself and friends. All of them still work and perform great to this day. I boil it down to grade of aluminum (or steel), tolerances of parts, Quality Control, and quality of metal finish. Machining also sets Manufacturers apart from the middle of the pack. I'll be honest... I don't understand the hype around BCM. Don't get me wrong, they produce quality parts. But, they lack design. Geissele is nice, but I don't get the price justification. I own a couple of triggers and other small parts. I went to the long range recently and had the pleasure of shooting next to a gentleman with a Geissele Super Duty. Coincidentally we both had steel plates set at 100 yards. I had a 10" plate with a 3" center plate and he had a 8" single plate. We both took our shots...about 100+ rounds each. I had one of my Aero Precision builds vs his Geissele Super Duty. I never missed on the 3" steel, as well as had a similar grouping as his Geissele. I will also mention the gentleman had several Mikes, and I missed none. I also had the pleasure of taking on my friend's FN 15 against my suppressed 10.5" Aero Precision. Again, my Aero Precision had a similar MOA as his Top Tier FN 15 rifle. Even suppressed, I believe my ejection pattern was more consistent with my Aero Precision than his FN 15. So, to consider something as Top Tier, what does that really mean? Especially since my Aero Precision is consistently holding it's own against Top Tier rifles?
PREACH!!!
@@user-zg5cq3cm1i Jus' sayin'
@@Styxx2018 The sound clip is CLASSIC!!!
Gotta love Florida!
@@Jus10worsT Louis Vuitton! People are so ridiculous!! I actually saw someone Cerakote the GUCCI logo on their Glock. Died laughing.
LOL! Tell them, Brotha! Not goin' to lie, I would vote for Grady Judd for PRESIDENT!!!!