Does he use power supplies as wall decor? I kinda fw that.
@TiganilaAlexandru3 күн бұрын
Ugly cuts on the video. Disliked.
@bromoboy3 күн бұрын
kisses ❤
@anantsharma53303 күн бұрын
Guys ! Acer is launching this 6 year old monitor in India with Acer 31.5 inch WQHD LED Backlit IPS Panel with HDR10, VGA, HDMI, 2X1W Inbuilt Speakers, Flicker-less, Blue light Shield, EcoDisplay, VisionCare, Tilt-able Stand, VESA wall Mount Ultra-Thin Monitor (SA322Q U) (Frameless, AMD Free Sync, Response Time: 1 ms, 75 Hz Refresh Rate). No shame left Acer?
@jdtechgear3 күн бұрын
@@anantsharma5330 this video was published over 6 years ago
@hmmn21853 күн бұрын
my gpu smells like thermal burning after 4 years of usage, replace it with new thermal paste still smells. I wonder what is wrong. I opened it up and cleaned everything tho.
@officialveezy4 күн бұрын
Thanks alot .
@urukhai78064 күн бұрын
My 10 years old gtx 970 was hitting 82 degrees while gaming constantly throttling. After doing this it's back to 68 degrees. The termal paste on it was completely dry and very little. Used lighter fluid to clean it off. Applied a lot more than recommended but having no problems atm.
@bennyfigueroa26437 күн бұрын
Am I missing something? I was disappointed with this system. The bass is extremely disappointing. The low ohms aren't there. Maybe i ordered a malfunctioning system from Amazon . Is it me, or is there something wrong with my stereo
@fairlymoon44819 күн бұрын
when'd u put in the ram and ssd?
@rjsmith200725 күн бұрын
Thanks for the reviews on these. It's hard to find practical review videos of these chairs.
@metabang0327 күн бұрын
Based on the under side of the keys, that keyboard will be in shambles if you press anything harder then very gracefully. Thanks for showing under the key to help me make a decision that I approve of. Good shit
@wtsukazan27 күн бұрын
<3 ..I got these, they are nice, my problem with them is having to re-enable Aura Sync mode everytime I pwr cycle the PC or wake the PC from sleep.. Other than that.. Awesome fans!!
@alexmoon579729 күн бұрын
Клрун
@sombxgamertagАй бұрын
I bought a used 3060 Ti, it was running hot, around 80°C, saw this tutorial, and now it's under 65°C, great tutorial.
@lipophobiczАй бұрын
There response times do they differentiate from each other possibly?
@najeebsiniАй бұрын
This support ddr5 ?
@Norman_PetersonАй бұрын
TRICK: To install the PSU mask, mout the mask first on your PSU unity, and THEN push all into the case and screw everything to the case. ;9
@michaturczak7396Ай бұрын
Well u can put an GTX 1660 SUPER on an 9 years old pc (its 2024 and pc i am taking about is from 2015)
@Wutwut1n1Ай бұрын
Unfortunately the Frametime is way less smooth as well, but it’s still a great card haha
@ManicAnimations1Ай бұрын
thanks I might build this
@user-rt5iw8hi1rАй бұрын
This is awesome
@ReyIsAwayАй бұрын
Is it ok to like touch the PCB like that? And even flip it to its back?
@del8boyАй бұрын
Yes my "PC case can do this" I bought the same case many years ago, still have it and use it every day, it has seen many different CPU's from a i7-5930K to a i9-9900k to currently i7-13600k All with Dark Rock 4 Pro and a Silent loop 2. Great case good quality and keeps my system nice and cool. PS. I did drill 36 holes in the top panel.
@gezimlimoni2319Ай бұрын
Almost three years with very good CM H500, such a good case
@simpson6700Ай бұрын
too bad that it's a crappy keyboard with a trashy design
@mrhathsАй бұрын
which mobo is that? that thing is sick!
@gameshole462Ай бұрын
Another grate tip: for anyone doining this without a magnetic screwdriver if you have a magnetic object or magnet you can align the magnetic polarity of the screwdriver by rubbing it upward this works for all metal object cuz your changing there magnetic pull 😊
@sneakyturtIeАй бұрын
does anyone know how to change the rgb on the front of the keyboard?
@Shajirr_2 ай бұрын
Its crazy that a 200$ case is now considered midrange. And its even missing a ton of drive bays, it has 5 upper slots but only 1 bay, so that would be more $ spent, meanwhile my previous Corsair case had all drive bays filled and cost like 80$. Plus they were built as removable trays, much better than in this case...
@johnmoricone2942 ай бұрын
Nice video, I'm now considering this case for my next build. I'm looking to build my wife a sffpc basically for work (MS office, Internet, nothing gaming) and am looking at a MB (Asus z790) and CPU (14900k) with 64 or 96gb ram and want it to handle 2 4k monitor w/out a GPU. All air-cooled with the Noctua NH-L12S. Building this all inside the Fractal Design Ridge case. What do you think of this (pro/con) and what case, CPU and MB would you recommend? Thank you.
@KDD00632 ай бұрын
Pretty sloppy craftsmanship but still a good video on the process
@KryzysX2 ай бұрын
Why am I here
@3butalcomp32 ай бұрын
Baking a GPU in an oven? How about what happened to the Cap's , the SMD's etc. ? No insults intended - however a Heat Gun Station is the way to go on all SMT devices. They're not inexpensive though. Certainly this can be accomplished with a 20 watt max. Soldering iron. Clean up the flux. Aside from all I've committed on - don't use paper towels! Otherwise good job on pulling the GPU apart.
@Teclameka-xq1xs2 ай бұрын
La exclusividad es el único argumento que puede justificar tales precios. Y los tiempos de espera son inaceptables, y solo responde a que los proveedores no quieren correr riesgos de hacer inversiones y tener stok, y eso lo puedo entender en proveedores pequeños, pero la mayoría de ellos ya son proveedores gigantes. I think that in the end we all look for excuses to justify such robberies, but thinking coldly, it is absurd what we pay for this.
@jjmasterboy96862 ай бұрын
Thanks dude this helped a lot!
@Alerosendo2 ай бұрын
parabéns!
@andreinaf2 ай бұрын
This video doesnt do justice to the rgb, i have one of those and the rgb is a lot less distracting, being a soft but decently bright light. The camera the video was recorded on is not the best and it looks like you are gonna have an epilepsy attack from it
@oximiob37833 ай бұрын
all sold out
@muhamedal-ataby73243 ай бұрын
😉
@muhamedal-ataby73243 ай бұрын
😊
@SPISheste3 ай бұрын
Group buys still suck in 2024
@jdtechgear3 ай бұрын
Yup. I stopped going into group buys 2 years ago
@AstorSkywalker3 ай бұрын
Wow great work!
@boteimai243 ай бұрын
can i install the new aio Arctic Liquid Freezer III 280 to this case?
@Docaston19763 ай бұрын
I just want that bracket for the gpu, why cant I find one!
@kiut57113 ай бұрын
thank you very much for this video!! so much great info to help me prepare for my build. I have seen some others sort of 'custom mount' their 360 AIO Cooler to act as exhaust on the top of the case(where you had put your exhaust fans)...then also using the side mount(where you put your 240AIO) to put 3 intake fans for more intake fans than exhaust. My question to anyone is... is one configuration necessarily "better" than another? Or are there any preferences when it comes to having more/less intake than exhaust fans? Any help is appreciated, thanks!
@NupeWoop3 ай бұрын
Thanks for giving us the benefit of the doubt, I really feel confident in myself now. Thank you!
@nazimsat5173 ай бұрын
any new ones coming soon? like an updated one or even a more "advanced" ?
@stevenswall3 ай бұрын
Is this a standard enough form factor someone could build a modern PC into it? I'm really disgusted with all the pukable trash cases these days that are basically just mesh and windows with no actual design thought or unique performance benefits. This case looks like the opposite of that with air flow directly through it instead of just mixing it all around inside the case.
@ssgpro16863 ай бұрын
kzread.info/dash/bejne/qWepmo-fg6mnnKg.html
@fabianmurillo54723 ай бұрын
Which one do you prefer, Nuphy Halo 75 or Akko Mod007??
Пікірлер
Does he use power supplies as wall decor? I kinda fw that.
Ugly cuts on the video. Disliked.
kisses ❤
Guys ! Acer is launching this 6 year old monitor in India with Acer 31.5 inch WQHD LED Backlit IPS Panel with HDR10, VGA, HDMI, 2X1W Inbuilt Speakers, Flicker-less, Blue light Shield, EcoDisplay, VisionCare, Tilt-able Stand, VESA wall Mount Ultra-Thin Monitor (SA322Q U) (Frameless, AMD Free Sync, Response Time: 1 ms, 75 Hz Refresh Rate). No shame left Acer?
@@anantsharma5330 this video was published over 6 years ago
my gpu smells like thermal burning after 4 years of usage, replace it with new thermal paste still smells. I wonder what is wrong. I opened it up and cleaned everything tho.
Thanks alot .
My 10 years old gtx 970 was hitting 82 degrees while gaming constantly throttling. After doing this it's back to 68 degrees. The termal paste on it was completely dry and very little. Used lighter fluid to clean it off. Applied a lot more than recommended but having no problems atm.
Am I missing something? I was disappointed with this system. The bass is extremely disappointing. The low ohms aren't there. Maybe i ordered a malfunctioning system from Amazon . Is it me, or is there something wrong with my stereo
when'd u put in the ram and ssd?
Thanks for the reviews on these. It's hard to find practical review videos of these chairs.
Based on the under side of the keys, that keyboard will be in shambles if you press anything harder then very gracefully. Thanks for showing under the key to help me make a decision that I approve of. Good shit
<3 ..I got these, they are nice, my problem with them is having to re-enable Aura Sync mode everytime I pwr cycle the PC or wake the PC from sleep.. Other than that.. Awesome fans!!
Клрун
I bought a used 3060 Ti, it was running hot, around 80°C, saw this tutorial, and now it's under 65°C, great tutorial.
There response times do they differentiate from each other possibly?
This support ddr5 ?
TRICK: To install the PSU mask, mout the mask first on your PSU unity, and THEN push all into the case and screw everything to the case. ;9
Well u can put an GTX 1660 SUPER on an 9 years old pc (its 2024 and pc i am taking about is from 2015)
Unfortunately the Frametime is way less smooth as well, but it’s still a great card haha
thanks I might build this
This is awesome
Is it ok to like touch the PCB like that? And even flip it to its back?
Yes my "PC case can do this" I bought the same case many years ago, still have it and use it every day, it has seen many different CPU's from a i7-5930K to a i9-9900k to currently i7-13600k All with Dark Rock 4 Pro and a Silent loop 2. Great case good quality and keeps my system nice and cool. PS. I did drill 36 holes in the top panel.
Almost three years with very good CM H500, such a good case
too bad that it's a crappy keyboard with a trashy design
which mobo is that? that thing is sick!
Another grate tip: for anyone doining this without a magnetic screwdriver if you have a magnetic object or magnet you can align the magnetic polarity of the screwdriver by rubbing it upward this works for all metal object cuz your changing there magnetic pull 😊
does anyone know how to change the rgb on the front of the keyboard?
Its crazy that a 200$ case is now considered midrange. And its even missing a ton of drive bays, it has 5 upper slots but only 1 bay, so that would be more $ spent, meanwhile my previous Corsair case had all drive bays filled and cost like 80$. Plus they were built as removable trays, much better than in this case...
Nice video, I'm now considering this case for my next build. I'm looking to build my wife a sffpc basically for work (MS office, Internet, nothing gaming) and am looking at a MB (Asus z790) and CPU (14900k) with 64 or 96gb ram and want it to handle 2 4k monitor w/out a GPU. All air-cooled with the Noctua NH-L12S. Building this all inside the Fractal Design Ridge case. What do you think of this (pro/con) and what case, CPU and MB would you recommend? Thank you.
Pretty sloppy craftsmanship but still a good video on the process
Why am I here
Baking a GPU in an oven? How about what happened to the Cap's , the SMD's etc. ? No insults intended - however a Heat Gun Station is the way to go on all SMT devices. They're not inexpensive though. Certainly this can be accomplished with a 20 watt max. Soldering iron. Clean up the flux. Aside from all I've committed on - don't use paper towels! Otherwise good job on pulling the GPU apart.
La exclusividad es el único argumento que puede justificar tales precios. Y los tiempos de espera son inaceptables, y solo responde a que los proveedores no quieren correr riesgos de hacer inversiones y tener stok, y eso lo puedo entender en proveedores pequeños, pero la mayoría de ellos ya son proveedores gigantes. I think that in the end we all look for excuses to justify such robberies, but thinking coldly, it is absurd what we pay for this.
Thanks dude this helped a lot!
parabéns!
This video doesnt do justice to the rgb, i have one of those and the rgb is a lot less distracting, being a soft but decently bright light. The camera the video was recorded on is not the best and it looks like you are gonna have an epilepsy attack from it
all sold out
😉
😊
Group buys still suck in 2024
Yup. I stopped going into group buys 2 years ago
Wow great work!
can i install the new aio Arctic Liquid Freezer III 280 to this case?
I just want that bracket for the gpu, why cant I find one!
thank you very much for this video!! so much great info to help me prepare for my build. I have seen some others sort of 'custom mount' their 360 AIO Cooler to act as exhaust on the top of the case(where you had put your exhaust fans)...then also using the side mount(where you put your 240AIO) to put 3 intake fans for more intake fans than exhaust. My question to anyone is... is one configuration necessarily "better" than another? Or are there any preferences when it comes to having more/less intake than exhaust fans? Any help is appreciated, thanks!
Thanks for giving us the benefit of the doubt, I really feel confident in myself now. Thank you!
any new ones coming soon? like an updated one or even a more "advanced" ?
Is this a standard enough form factor someone could build a modern PC into it? I'm really disgusted with all the pukable trash cases these days that are basically just mesh and windows with no actual design thought or unique performance benefits. This case looks like the opposite of that with air flow directly through it instead of just mixing it all around inside the case.
kzread.info/dash/bejne/qWepmo-fg6mnnKg.html
Which one do you prefer, Nuphy Halo 75 or Akko Mod007??