Пікірлер

• 
  @escharenguivel16 күн бұрын

  Hi, on the v4 if I run sh and soap open I’m assuming it would draw the same percentage of soap and sh? Just curious if my draw percentage of sh is now halved with soap valve open and now the sh strength becomes too weak. For example if just sh valve was open I was drawing at 1% by opening the soap does the sh draw drop to 0.5%? Hope that makes sense

• 
  @northjerseykevin40917 күн бұрын

  Is that a SH product?

• 
  @northjerseykevin40917 күн бұрын

  Effective, When using 12.5 SH with the XJet what % can it put out? Thanks

• 
  @northjerseykevin40917 күн бұрын

  Impressive distance

• 
  @northjerseykevin40917 күн бұрын

  How does the duel 12 volt work? Do the join together to make more output or is in case one brakes , he has another or is it to help transfer chem throughout the van? I’ll be honest. I haven’t seen a van build that’s ever caught my eye but this one has. One last question. Randomly someone in my area is selling that exact softwashing skid. It’s basically brand new. Very low hours. He asking 4k for it. Do you think that’s a decent deal? Thanks again

• 
  @northjerseykevin40917 күн бұрын

  Turned out really nice. You said “ he’ll be able to take on some big commercial jobs with this”. Will he really? Is an honest question. I ask because I’ve been thinking about a setup like this but have second guessed myself questioning if I would be able to handle commercial work if it came my way. Really nice setup. What’s something like this cost roughly ? Not including the van. What are your thoughts about vans? I’ve beeen thingking flatbed or pickup…thanks again 👍👍

• 
  @northjerseykevin40917 күн бұрын

  Great video…. I assume doing this kind of work is more lucrative than softwashing homes? Really well done .. thanks

• 
  @northjerseykevin40917 күн бұрын

  Good explanation.. thanks

• 
  @northjerseykevin40918 күн бұрын

  Great explanation. Thank you. Can some downstream injector’s pull more than others to produce a hotter mix?

• 
  @RaniljayakodyАй бұрын

  good info.. got all i need..

• 
  @EricGonzales-gn7yuАй бұрын

  can you share a link for that chemical you are using please.

• 
  @autohog2 ай бұрын

  Thank you for the crystal clear explanation

• 
  @akanbiadebayo98112 ай бұрын

  Please show how the hose and other parts are coupled 1:36 1:38

• 
  @AnthonyWilson-gi8sb3 ай бұрын

  hi do the f9 barc leave a white chalk stain on blacktop street after use?

• 
  @bigshotsuppliescanada99863 ай бұрын

  No it will not!

• 
  @maryrainwater65763 ай бұрын

  Yes, great video.. Looks fun and inspiring!

• 
  @bigshotsuppliescanada99863 ай бұрын

  It is a great event and would love to see you there this year!

• 
  @jerryperwal85693 ай бұрын

  Bit of both⚓️ Great job 🫡 more content bro 🙏🇨🇦

• 
  @bigshotsuppliescanada99863 ай бұрын

  Thank you and yes we will keep pumping out the content!

• 
  @dcspa9915Ай бұрын

  Can you recommend a injector brand that has a ratio of 10 to 1 that you spoke about

• 
  @jjgionet17353 ай бұрын

  Great video! So I just bought an Echo 4200psi 4GPM with a GX390 and an AR Triplex pump. There are no bypass hoses, but at the base the black unloader pressure knob, there is a brass plug. Is this where I should plumb into? Wish I could send a pic Thanks!

• 
  @bigshotsuppliescanada99863 ай бұрын

  It would help to know what type of unloader it is?

• 
  @jumpman26803 ай бұрын

  Do you need this for direct drive pumps too?

• 
  @bigshotsuppliescanada99863 ай бұрын

  Yes it works with direct drive. and is recommended!

• 
  @brandonglidden4 ай бұрын

  Thank you brother for posting this. This helped me out a ton.

• 
  @bigshotsuppliescanada99863 ай бұрын

  Very happy to help!

• 
  @Blake_trammel5 ай бұрын

  What about on the opposite side of your bypass line it the black nipple do you have to plug that?

• 
  @cyber_sal5 ай бұрын

  Super helpful video - thank you!!! Your detailed explanation was just what I needed. 👍🏼

• 
  @bigshotsuppliescanada99863 ай бұрын

  Right on. Glad to help

• 
  @Nicholas19995 ай бұрын

  I like to use the zep tnt truck wash high pressure soap

• 
  @tfmobilewash8404 ай бұрын

  I've been using that one but struggled a bit on trailers.😢

• 
  @Nicholas19995 ай бұрын

  The only way this wouldn't work if you use high pressure soap. It will just go on the ground or in your water tank

• 
  @scandyoz32925 ай бұрын

  If a pressure washer do have a bypass hose is it Internally bypassing then?

• 
  @bradelias79116 ай бұрын

  helpful. do you have kits for the bypass

• 
  @chuckhenderson72666 ай бұрын

  how do i bypass a simpson 4000 psi model?? thanks

• 
  @aaanngeeelll_34706 ай бұрын

  what if you surface cleaner connects with a 1/4 can you still get the 3/8 ball valve?

• 
  @noeaguinaga40186 ай бұрын

  The only time the pump is in need if the trigger being pressed for worry of burning up is if there is any leak in the system. If the machine surges up and down that means there is a leak or your unloader is broken. That's when you worry about cavitation

• 
  @noeaguinaga40186 ай бұрын

  If your not pulling the trigger the plungers in the pump arent engaging, there's a clutch system in the pump that allows the belt or crank driven to soon freely.

• 
  @Rabbit.7607 ай бұрын

  The pump might be rated for 10gpm but that thing ain't pushing a whole 10 gallons thru those tiny jets in one minute, no fkn way

• 
  @oleok7 ай бұрын

  How do i use IT for karcher EASY!Force Advanced gun ?

• 
  @briceworks33478 ай бұрын

  Awesome and informative video. 👍🏼 what kind of quick connect connectors are you using for the 5 gal buckets to connect to your hose? I’m new to PW

• 
  @fleetppw8 ай бұрын

  nice build! how much would a setup like this go for??

• 
  @dylanbyrne9558 ай бұрын

  You're a G thanks!

• 
  @johnbrown37308 ай бұрын

  THIS ROOF NOT CLEAN AT ALL I CAN SEE MOSS AFTER CLEANING IT BEHIND THE GUY MORE MOSS

• 
  @joq7029 ай бұрын

  Nice tip.

• 
  @j.racknor59349 ай бұрын

  I used F9 Barc on a big rock out front of a customers house, they have really heavy iron in there water and they were watering fresh planted grass. The rock was orange in the matter of a month and I used about 1:3 - 1:4 mix in a spray bottle and took all the rust stain out of the rock. 1200 psi 4gpm to rinse off.

• 
  @asikachinedu88549 ай бұрын

  You have no idea how much relief you have given me with this video. Thank you very much

• 
  @bigshotsuppliescanada99863 ай бұрын

  Amazing!!

• 
  @axeyplayz105210 ай бұрын

  Do all pressure washer have the 1/4 outlet/inlet size ?

• 
  @rayrussell590310 ай бұрын

  Where can i find this

• 
  @dylanbyrne95510 ай бұрын

  Nice I have some F9 BARC but haven't used it yet. Good to know. Also what alkaline neutralizer did you use?

• 
  @bigshotsuppliescanada99863 ай бұрын

  F9 Double Eagle is a good one but you can use any alkaline degreaser.

• 
  @Front9Restoration10 ай бұрын

  Nice work!

• 
  @bigshotsuppliescanada998610 ай бұрын

  Thanks F9 - Holding it down as best we can in Canada! Thanks for the awesome products!

• 
  @bobcunningham422311 ай бұрын

  What a relief to finally find a video that shows a practical and straightforward way to actually do this. And as a bonus this is the exact unit that I have so that will make it even that much more easier thank you so much.

• 
  @bigshotsuppliescanada998610 ай бұрын

  Glad you liked it!

• 
  @autohog2 ай бұрын

  What unit is this?

• 
  @bigshotpressurewashing514611 ай бұрын

  Great Video!

• 
  @comeoll11 ай бұрын

  Very interesting. Thank you for sharing your knowledge. I wanted to ask why my pressure washer doesn't turn off when I release the trigger? Is it a mi-t-m model cm1400 omeh?

• 
  @stan37ca Жыл бұрын

  Stoked for this year! Nice video.

• 
  @gonzalezprestige1498 Жыл бұрын

  What's your number again bro.? Dallas Texas here

• 
  @drowization Жыл бұрын

  Great vid, just what I was looking for, thank you....

• 
  @bigshotsuppliescanada99863 ай бұрын

  Your welcome

• 
  @wernergarcia6820 Жыл бұрын

  Great video , my only question is , if my pressure washer don’t have a bypass , the fitting that screw into the unloader it’s just a fitting with a barb or is it a specific valve