We explain how to set up your pressure washer to go into bypass mode when you are not using the trigger and explain how to do this and why it is important!
Жүктеу.....
Пікірлер: 95
@bobcunningham422311 ай бұрын
What a relief to finally find a video that shows a practical and straightforward way to actually do this. And as a bonus this is the exact unit that I have so that will make it even that much more easier thank you so much.
@bigshotsuppliescanada9986
10 ай бұрын
Glad you liked it!
@autohog
2 ай бұрын
What unit is this?
@asikachinedu88549 ай бұрын
You have no idea how much relief you have given me with this video. Thank you very much
@bigshotsuppliescanada9986
3 ай бұрын
Amazing!!
@cyber_sal5 ай бұрын
Super helpful video - thank you!!! Your detailed explanation was just what I needed. 👍🏼
@bigshotsuppliescanada9986
3 ай бұрын
Right on. Glad to help
@autohog2 ай бұрын
Thank you for the crystal clear explanation
@33brizzy2 жыл бұрын
Great video, I used to be very confused about this, very helpful 👌
@bigshotsuppliescanada9986
3 ай бұрын
We are glad to help! Thanks for watching!
@devindelaughter8812 жыл бұрын
Very straight forward! Great video!
@bigshotsuppliescanada9986
3 ай бұрын
Thankyou!
@mentalwellnessmusictherapy5072 Жыл бұрын
Great video with a clear explanation! Thanks man!
@bigshotsuppliescanada9986
3 ай бұрын
Your welcome!
@brandonglidden4 ай бұрын
Thank you brother for posting this. This helped me out a ton.
@bigshotsuppliescanada9986
3 ай бұрын
Very happy to help!
@eugenedenny91192 жыл бұрын
Thanks Colin
@tonyt35882 жыл бұрын
Great video
@RaniljayakodyАй бұрын
good info.. got all i need..
@dylanbyrne9558 ай бұрын
You're a G thanks!
@drowization Жыл бұрын
Great vid, just what I was looking for, thank you....
@bigshotsuppliescanada9986
3 ай бұрын
Your welcome
@lynns432 Жыл бұрын
Excellent video - very helpfull. Thanks for taking the time to make it.
@bigshotsuppliescanada9986
3 ай бұрын
You bet!
@pmario3051 Жыл бұрын
Thanks for the vid, Great info. Plus, I got to be your 500 sub. Congrats man,
@kylemercure29182 жыл бұрын
Awesome man thank you so much for the video eh. Most videos only discuss with a buffer tank. I was concerned that I needed a looped system with buffer. Now I know I can plum the vent tube through my truck bed to the ground ad my 4gpm lives in my truck bed with the skid but I don’t have a buffer tank. Right on brotha. Just subscribed. My wife is from Sooke.
@bigshotsuppliescanada9986
3 ай бұрын
Great news and glad to help!!
@jeffunruh4912
Ай бұрын
@kylemercure2918 mine is mounted in the truck and I just dump the water on the ground as well.
@peachypound61082 жыл бұрын
Great Vid my friend. So simple, so informative. Question🙋🏽♂️: why would you have to cut the tube, when you could’ve just unscrewed it?
@451dev Жыл бұрын
I have a belt driven Simpson pressure washer 4200psi at 4GPM I did not know it would suck water on its own. that's awesome !
@bradelias79116 ай бұрын
helpful. do you have kits for the bypass
@comeoll Жыл бұрын
Very interesting. Thank you for sharing your knowledge. I wanted to ask why my pressure washer doesn't turn off when I release the trigger? Is it a mi-t-m model cm1400 omeh?
@OfficialMinecraftMenace Жыл бұрын
Thanks for the video! Could you DIY this with a triple AAA pump (4 gallon per minute)?
@wernergarcia6820 Жыл бұрын
Great video , my only question is , if my pressure washer don’t have a bypass , the fitting that screw into the unloader it’s just a fitting with a barb or is it a specific valve
@Rabbit.7607 ай бұрын
The pump might be rated for 10gpm but that thing ain't pushing a whole 10 gallons thru those tiny jets in one minute, no fkn way
@acihawaii2 жыл бұрын
Great video and i like the water exiting the hose method Replacing a Simpson AAA EW4040 pump 4 gpm Honda 390 knock off mobile unit Should the new AR pump have an unloader or will an AR pump with a built in regulator be adequate ? Using as a jetter and require short breaks, say 3 minutes to camera drainage pipe Again, like the water exiting the hose method RR
@jonboysprowash7845 Жыл бұрын
If you bypass the unloader and discharge water onto the ground will the pump not run out of water? Either from you being on the trigger or off and it running running out? I’m trying to get a new pump where it needs to be.
@noeaguinaga40186 ай бұрын
If your not pulling the trigger the plungers in the pump arent engaging, there's a clutch system in the pump that allows the belt or crank driven to soon freely.
@donovanstevens903 Жыл бұрын
Bought this model off someone recently and they removed the bypass tube at some point and capped it off. Would I be able to downstream off of this??
@tgeorge78 Жыл бұрын
Can you run a bypass on a built in unloader valve (the one that came with the machine)? The discharge seems to be in the back of the pump with no outlets anywhere near the nob under the unloader. Or would I need to buy an external unloader valve to run bypass?
@Blake_trammel5 ай бұрын
What about on the opposite side of your bypass line it the black nipple do you have to plug that?
@g-manm23052 жыл бұрын
I have that same unit and I'm fixing to build my skid. What about the thermal relief valve on the other side of the unloader? Since you're bypassing the line does the relief valve need to plugged as well?
@zygagne2646 Жыл бұрын
I have a triple AAA 4gpm water pump on my dewalt… They sell just a plumbing kit with the unloader bypass ( not the whole pump ) I am wanting to make sure I can swap this out. Could you assist if this will work or not?
@lifeisrandom23 Жыл бұрын
Great video. Thanks for sharing. Where do you buy the plugs?
@bigshotsuppliescanada9986
3 ай бұрын
We sell them at our online store. They can be tricky to find though and it depends on where you live!
@reginaldhooks14562 жыл бұрын
I have a question I tried to bypass mine like that and it lowered my PSI but I'm going to try to bypass it back to my tub
@keithgehrke3588 Жыл бұрын
I have a 4000psi 4.2gpm unit and want to add an external unloader do you have what is needed ?
@axeyplayz105210 ай бұрын
Do all pressure washer have the 1/4 outlet/inlet size ?
@littlespressurewashing2 жыл бұрын
What a great channel buddy
@HouseWashingRick
2 жыл бұрын
What up homie, down here in Cookeville giving you the 👋
@littlespressurewashing
2 жыл бұрын
@@HouseWashingRick much love from middle Tennessee and northern Alabama back at ya 👍 just dropped some new videos trying to help some people on this wash journey “teamwork makes the dreamwork” 🔑 ♥️
@HouseWashingRick
2 жыл бұрын
Hell Yeah brother, let's grab lunch one day in the future during the winter months and kick it for a little bit
@littlespressurewashing
2 жыл бұрын
@@HouseWashingRick for sure let’s do it! I’ll be at the HUGE CONVENTION most likely
@littlespressurewashing
2 жыл бұрын
It’s in Nashville this year in August I believe
@jjgionet17353 ай бұрын
Great video! So I just bought an Echo 4200psi 4GPM with a GX390 and an AR Triplex pump. There are no bypass hoses, but at the base the black unloader pressure knob, there is a brass plug. Is this where I should plumb into? Wish I could send a pic Thanks!
@bigshotsuppliescanada9986
3 ай бұрын
It would help to know what type of unloader it is?
@noeaguinaga40186 ай бұрын
The only time the pump is in need if the trigger being pressed for worry of burning up is if there is any leak in the system. If the machine surges up and down that means there is a leak or your unloader is broken. That's when you worry about cavitation
@bill_nye_the_russianspy_9642 Жыл бұрын
I just picked up the same model as yours off a guy for $300, its a 4200 psi 4.0 gpm belt driven, anyway I did the exact thing you did and the water comes out of the hose fast! Then it wants to kill the motor. But when I hook it back up it works perfectly. I don't understand, its the exact same setup as yours and I did it the same exact way as you did.
@toddfinn5823
Жыл бұрын
Sounds like your unloader needs adjusted, sounds like someone has cranked it wide open which will do what you explained.
@alanphillips13442 жыл бұрын
You mentioned about sucking the water with gear driven pumps, some come with thermo relief valves. Would I still do the same thing to bypass?
@bryanmontgomery4050
Жыл бұрын
It would definitely be a very good idea, that thermal relief is set just below the limit of the pump as a last resort, a cool pump is always a happy pump.
@scandyoz32925 ай бұрын
If a pressure washer do have a bypass hose is it Internally bypassing then?
@longlivefreedom9853 Жыл бұрын
Great video.... maybe i am impatiant.. but it was little long winded in places..... I cam to see how you do this and you got side tracked talking about other things..... My poiunt my guess is that many want something specific...
@juniorgarza82652 жыл бұрын
Hey I have a Simpson 3300 but mines doesn’t come with the hose on the water pump, is it possible to bypass that water pump thru the thermal water valve? Cause that’s the only place where leaks does come when it does leak
@HouseWashingRick
Жыл бұрын
No
@TheBryceJohnston2 жыл бұрын
can you use a direct drive pump for this or does it need to be belt drive
@peachypound6108
2 жыл бұрын
I believe you can use a direct drive.
@Louisiana_Frenchies Жыл бұрын
Where do you get the plug ? Can’t find them online anywhere or is it just a standard 1/4 inch plug
@bigshotsuppliescanada9986
3 ай бұрын
Yes its just a NPT )Nation Pipe Thread) 1/4" plug....No special but they can hard to find. In Canada you can buy them from our online store!
@Will-tm5bj Жыл бұрын
I'm running a bypass on mine now because the guy I was doing his driveway saw water going out of my ballvalve while I walked away to get something. It ran for maybe 45 50 seconds 😮😮😮. Still running fine but I don't want that again
@mlhm52 жыл бұрын
I use a trash can on wheels as my tank. Put the water hose in the trash can, the inlet hose and the by pass hose.
@HouseWashingRick Жыл бұрын
If a customer comes to talk to you and you have it on bypass how long can you let it run through bypass before you pull the trigger or turn it off
@Wi_Celt
Жыл бұрын
It doesn’t matter any more once u have a bypass system
@jumpman26804 ай бұрын
Do you need this for direct drive pumps too?
@bigshotsuppliescanada9986
3 ай бұрын
Yes it works with direct drive. and is recommended!
@TROUBLE8088 Жыл бұрын
So I'm buying a Preditor 4gpm from Harbor freight can you see if I'm able to do this with that machine? And can I buy the cap u used?
@platinumhawkpw
Жыл бұрын
The AR pump that comes with the Predator 420 doesn’t have a bypass hose so no you wouldn’t be to
@erhelitruck
Жыл бұрын
Thanks for sharing. Predator 4gpm is similar than your, but doesn't have the hose, it has a cap, so put out and the water comes out continually, I mean water doesn't stop if I press the trigger. is that notmal?
@chuckhenderson72666 ай бұрын
how do i bypass a simpson 4000 psi model?? thanks
@berniewhitehouse2105 Жыл бұрын
Is the bypass hose size for a 5gpm 3/8”?
@Victor-nn2wi
Жыл бұрын
Yes and the plunge that you would use would be 1/4
@davidstearswindowcleaningr2677 Жыл бұрын
What brand OF pressure washer? Name brand
@tgeorge78 Жыл бұрын
I’m confused because my 4 gpm machine came with no such hose.
@taborprowashllc63912 жыл бұрын
Hey, if I’m off the trigger and pump is cycling will it draw chem from my bleach tank?
@overlandjunky5535
2 жыл бұрын
That's a great question. I'm assuming it will as well. That's a conundrum we're in.
@overlandjunky5535
2 жыл бұрын
Remedy: you could add a 3 way ball valve to the water relief hose so that when you use the bleach, it cycles and will not be wasted onto the ground. And when you just washing and rinsing, turn the ball valve off so that it can relief all that water onto the ground. This is what I would do.
@bradsnyder978 Жыл бұрын
Don't understand. If you bypass and string it to the handle,when you got to move it, isn't water running right at the tech
@bryanmontgomery4050 Жыл бұрын
Note, the unloader only slips out a small amount of low pressure water, just enough to keep the pump cool.
@Nicholas19995 ай бұрын
The only way this wouldn't work if you use high pressure soap. It will just go on the ground or in your water tank
Пікірлер: 95
What a relief to finally find a video that shows a practical and straightforward way to actually do this. And as a bonus this is the exact unit that I have so that will make it even that much more easier thank you so much.
@bigshotsuppliescanada9986
10 ай бұрын
Glad you liked it!
@autohog
2 ай бұрын
What unit is this?
You have no idea how much relief you have given me with this video. Thank you very much
@bigshotsuppliescanada9986
3 ай бұрын
Amazing!!
Super helpful video - thank you!!! Your detailed explanation was just what I needed. 👍🏼
@bigshotsuppliescanada9986
3 ай бұрын
Right on. Glad to help
Thank you for the crystal clear explanation
Great video, I used to be very confused about this, very helpful 👌
@bigshotsuppliescanada9986
3 ай бұрын
We are glad to help! Thanks for watching!
Very straight forward! Great video!
@bigshotsuppliescanada9986
3 ай бұрын
Thankyou!
Great video with a clear explanation! Thanks man!
@bigshotsuppliescanada9986
3 ай бұрын
Your welcome!
Thank you brother for posting this. This helped me out a ton.
@bigshotsuppliescanada9986
3 ай бұрын
Very happy to help!
Thanks Colin
Great video
good info.. got all i need..
You're a G thanks!
Great vid, just what I was looking for, thank you....
@bigshotsuppliescanada9986
3 ай бұрын
Your welcome
Excellent video - very helpfull. Thanks for taking the time to make it.
@bigshotsuppliescanada9986
3 ай бұрын
You bet!
Thanks for the vid, Great info. Plus, I got to be your 500 sub. Congrats man,
Awesome man thank you so much for the video eh. Most videos only discuss with a buffer tank. I was concerned that I needed a looped system with buffer. Now I know I can plum the vent tube through my truck bed to the ground ad my 4gpm lives in my truck bed with the skid but I don’t have a buffer tank. Right on brotha. Just subscribed. My wife is from Sooke.
@bigshotsuppliescanada9986
3 ай бұрын
Great news and glad to help!!
@jeffunruh4912
Ай бұрын
@kylemercure2918 mine is mounted in the truck and I just dump the water on the ground as well.
Great Vid my friend. So simple, so informative. Question🙋🏽♂️: why would you have to cut the tube, when you could’ve just unscrewed it?
I have a belt driven Simpson pressure washer 4200psi at 4GPM I did not know it would suck water on its own. that's awesome !
helpful. do you have kits for the bypass
Very interesting. Thank you for sharing your knowledge. I wanted to ask why my pressure washer doesn't turn off when I release the trigger? Is it a mi-t-m model cm1400 omeh?
Thanks for the video! Could you DIY this with a triple AAA pump (4 gallon per minute)?
Great video , my only question is , if my pressure washer don’t have a bypass , the fitting that screw into the unloader it’s just a fitting with a barb or is it a specific valve
The pump might be rated for 10gpm but that thing ain't pushing a whole 10 gallons thru those tiny jets in one minute, no fkn way
Great video and i like the water exiting the hose method Replacing a Simpson AAA EW4040 pump 4 gpm Honda 390 knock off mobile unit Should the new AR pump have an unloader or will an AR pump with a built in regulator be adequate ? Using as a jetter and require short breaks, say 3 minutes to camera drainage pipe Again, like the water exiting the hose method RR
If you bypass the unloader and discharge water onto the ground will the pump not run out of water? Either from you being on the trigger or off and it running running out? I’m trying to get a new pump where it needs to be.
If your not pulling the trigger the plungers in the pump arent engaging, there's a clutch system in the pump that allows the belt or crank driven to soon freely.
Bought this model off someone recently and they removed the bypass tube at some point and capped it off. Would I be able to downstream off of this??
Can you run a bypass on a built in unloader valve (the one that came with the machine)? The discharge seems to be in the back of the pump with no outlets anywhere near the nob under the unloader. Or would I need to buy an external unloader valve to run bypass?
What about on the opposite side of your bypass line it the black nipple do you have to plug that?
I have that same unit and I'm fixing to build my skid. What about the thermal relief valve on the other side of the unloader? Since you're bypassing the line does the relief valve need to plugged as well?
I have a triple AAA 4gpm water pump on my dewalt… They sell just a plumbing kit with the unloader bypass ( not the whole pump ) I am wanting to make sure I can swap this out. Could you assist if this will work or not?
Great video. Thanks for sharing. Where do you buy the plugs?
@bigshotsuppliescanada9986
3 ай бұрын
We sell them at our online store. They can be tricky to find though and it depends on where you live!
I have a question I tried to bypass mine like that and it lowered my PSI but I'm going to try to bypass it back to my tub
I have a 4000psi 4.2gpm unit and want to add an external unloader do you have what is needed ?
Do all pressure washer have the 1/4 outlet/inlet size ?
What a great channel buddy
@HouseWashingRick
2 жыл бұрын
What up homie, down here in Cookeville giving you the 👋
@littlespressurewashing
2 жыл бұрын
@@HouseWashingRick much love from middle Tennessee and northern Alabama back at ya 👍 just dropped some new videos trying to help some people on this wash journey “teamwork makes the dreamwork” 🔑 ♥️
@HouseWashingRick
2 жыл бұрын
Hell Yeah brother, let's grab lunch one day in the future during the winter months and kick it for a little bit
@littlespressurewashing
2 жыл бұрын
@@HouseWashingRick for sure let’s do it! I’ll be at the HUGE CONVENTION most likely
@littlespressurewashing
2 жыл бұрын
It’s in Nashville this year in August I believe
Great video! So I just bought an Echo 4200psi 4GPM with a GX390 and an AR Triplex pump. There are no bypass hoses, but at the base the black unloader pressure knob, there is a brass plug. Is this where I should plumb into? Wish I could send a pic Thanks!
@bigshotsuppliescanada9986
3 ай бұрын
It would help to know what type of unloader it is?
The only time the pump is in need if the trigger being pressed for worry of burning up is if there is any leak in the system. If the machine surges up and down that means there is a leak or your unloader is broken. That's when you worry about cavitation
I just picked up the same model as yours off a guy for $300, its a 4200 psi 4.0 gpm belt driven, anyway I did the exact thing you did and the water comes out of the hose fast! Then it wants to kill the motor. But when I hook it back up it works perfectly. I don't understand, its the exact same setup as yours and I did it the same exact way as you did.
@toddfinn5823
Жыл бұрын
Sounds like your unloader needs adjusted, sounds like someone has cranked it wide open which will do what you explained.
You mentioned about sucking the water with gear driven pumps, some come with thermo relief valves. Would I still do the same thing to bypass?
@bryanmontgomery4050
Жыл бұрын
It would definitely be a very good idea, that thermal relief is set just below the limit of the pump as a last resort, a cool pump is always a happy pump.
If a pressure washer do have a bypass hose is it Internally bypassing then?
Great video.... maybe i am impatiant.. but it was little long winded in places..... I cam to see how you do this and you got side tracked talking about other things..... My poiunt my guess is that many want something specific...
Hey I have a Simpson 3300 but mines doesn’t come with the hose on the water pump, is it possible to bypass that water pump thru the thermal water valve? Cause that’s the only place where leaks does come when it does leak
@HouseWashingRick
Жыл бұрын
No
can you use a direct drive pump for this or does it need to be belt drive
@peachypound6108
2 жыл бұрын
I believe you can use a direct drive.
Where do you get the plug ? Can’t find them online anywhere or is it just a standard 1/4 inch plug
@bigshotsuppliescanada9986
3 ай бұрын
Yes its just a NPT )Nation Pipe Thread) 1/4" plug....No special but they can hard to find. In Canada you can buy them from our online store!
I'm running a bypass on mine now because the guy I was doing his driveway saw water going out of my ballvalve while I walked away to get something. It ran for maybe 45 50 seconds 😮😮😮. Still running fine but I don't want that again
I use a trash can on wheels as my tank. Put the water hose in the trash can, the inlet hose and the by pass hose.
If a customer comes to talk to you and you have it on bypass how long can you let it run through bypass before you pull the trigger or turn it off
@Wi_Celt
Жыл бұрын
It doesn’t matter any more once u have a bypass system
Do you need this for direct drive pumps too?
@bigshotsuppliescanada9986
3 ай бұрын
Yes it works with direct drive. and is recommended!
So I'm buying a Preditor 4gpm from Harbor freight can you see if I'm able to do this with that machine? And can I buy the cap u used?
@platinumhawkpw
Жыл бұрын
The AR pump that comes with the Predator 420 doesn’t have a bypass hose so no you wouldn’t be to
@erhelitruck
Жыл бұрын
Thanks for sharing. Predator 4gpm is similar than your, but doesn't have the hose, it has a cap, so put out and the water comes out continually, I mean water doesn't stop if I press the trigger. is that notmal?
how do i bypass a simpson 4000 psi model?? thanks
Is the bypass hose size for a 5gpm 3/8”?
@Victor-nn2wi
Жыл бұрын
Yes and the plunge that you would use would be 1/4
What brand OF pressure washer? Name brand
I’m confused because my 4 gpm machine came with no such hose.
Hey, if I’m off the trigger and pump is cycling will it draw chem from my bleach tank?
@overlandjunky5535
2 жыл бұрын
That's a great question. I'm assuming it will as well. That's a conundrum we're in.
@overlandjunky5535
2 жыл бұрын
Remedy: you could add a 3 way ball valve to the water relief hose so that when you use the bleach, it cycles and will not be wasted onto the ground. And when you just washing and rinsing, turn the ball valve off so that it can relief all that water onto the ground. This is what I would do.
Don't understand. If you bypass and string it to the handle,when you got to move it, isn't water running right at the tech
Note, the unloader only slips out a small amount of low pressure water, just enough to keep the pump cool.
The only way this wouldn't work if you use high pressure soap. It will just go on the ground or in your water tank
Do you all actually watch over your videos?
What's your number again bro.? Dallas Texas here
Great video