Finally, somebody gives an explanation in a short manner and doesn't try to be a television actor with 10 minutes of crap. thank you sir great explanation
@Bombiedude.27 күн бұрын
There seems to be a relay problem with this elevator because when the doors are open they jitter each second
@survivingthetimesАй бұрын
If you worked that slow at my school, you would be there until 4 in the morning.
@IlllysaUknow-yu9dyАй бұрын
Side so where is my 401k and checks my I'd was lost....
@jamesyannizzi95182 ай бұрын
She missed a lot of spots sweeping
@user-vs4ox5ct2d4 ай бұрын
What if it just blow cold air
@Bombiedude.4 ай бұрын
The high school I attend as a kid has a problem where one kid will go into a random bathroom and take the soap despenser off the wall and shove it down the toilet and Ive actually seen it happen and reported it to a nearby teacher so the janitor can take care of it and I certainly hope they catch the kid who did it
@antoniopizarro17456 ай бұрын
Can’t add to My Favorites bookmark. Actions cannot be edited. Iphone 15 bad bad bad
@joseestrada10118 ай бұрын
What size are the filters
@marshalljimduncanАй бұрын
10.5"x64"x3/4" fiberglass
@thethrasher-yz4ck8 ай бұрын
Thanks great video
@user-ug4nf4vr8s8 ай бұрын
Does it matter which hole the wires go into?
@dustinfortner9054 ай бұрын
No
@notsniped10 ай бұрын
Just a few things to point out here: 1) In Phase I fire service, once the elevator reaches the first floor and doors completely open, the Firefighter hat should become completely stable and should not be blinking. The blinking hat signifies there is a door operator fault, or the smoke detector/sprinklers were triggered in the shaft, which may result in a shunt trip cutting off all power to the elevator. 2) That faulty door operator should be fixed. It looks like its having a stroke. The door should remain stable in its open position and shouldn't keep bouncing like that. Needs help. 3) When performing an elevator inspection, in Fire Service Phase II, the door bumpers and electric eye should be checked to make sure that they don't reopen the doors even if they are triggered. 4) When not in Fire Service mode, the elevator's door access key should be tested as well to make sure it's functional. 5) Probably not a default procedure, but when inspecting an elevator, the alarm bell should be tested to make sure it works. With all of these issues pointed out, I'm actually surprised to find out that the inspector actually passed the elevator inspection. Not very cool.
@pattytravis67911 ай бұрын
Make sure to place a wet floor sign down
@Bombiedude.11 ай бұрын
Most quietest dover impulse hydraulic elevator Ive ever heard on a video
@AJ-gz6qd Жыл бұрын
You lost me when you hooked the red wire up to the yellow.
@2002MX5 Жыл бұрын
Worst video ever filmed.
@ravigovande2922 Жыл бұрын
Do you have a video on how to replace Single Pin FA8 Tombstone?
@jakewalz4677 Жыл бұрын
Baffles me how they think using the same cloth that has touched the bottom of a toilet/urinal on the flush handles and seats qualifies as reducing cross contamination. Not cool. Very unacceptable work.
@Herzogspottings Жыл бұрын
For most elevators, If the helmet is flashing like that it means there has been a fire alarm activation in the shaft and you cannot ride that elevator
@tommarsee6319 Жыл бұрын
That’s a high neck plunger you’ve got and those do know how to pack a punch.
@josemarinez445 Жыл бұрын
can you add some real work, like, change the water valve, terminal equipment controller, or even just the motor fan? there is not much info on how to do this things, Thank you!
@davekeiser842 Жыл бұрын
I was waiting for your badge to get sucked in to the squirrel cage.. now that would have been entertainment
@AndyDiMartino Жыл бұрын
How often do you change filters, What about the filter behind the blowers? Don't you change those?
@dalondabaker3338 Жыл бұрын
Girl u can't even clean a restroom..so cleaning a classroom is even worse..no ma'am go sit down
@dalondabaker3338 Жыл бұрын
That's not how you clean..that's DISGUSTING SHES CROSS CONTAMINATING!!!! UGH THESE PEOPLE...
@hockeysockeys5323 Жыл бұрын
What kind of wax is on the floor
@MrScott6780 Жыл бұрын
Make sure you change can liners
@Bombiedude. Жыл бұрын
I also remember seeing some schools where they will put a cover over the pull station so if a kid walks by and slips they dont accidentally pull it but some owners of schools can not get the idea of safety covers over fire alarm stations in their heads like they really want to see a kid accidentally pull it and get in trouble.
@Bombiedude. Жыл бұрын
And also schools have this new thing where if something was going on and someone needed to pull the alarm they can press a button and it will dial the principle and they can explain somethings going on and they will set it off but they dont put a cover on the button to prevent it accidentally being pressed
@clayflesher38042 жыл бұрын
That's really cool
@f5tornadogray2 жыл бұрын
OOO it's a Dover!
@Bombiedude.2 жыл бұрын
A few of the local schools where I live have this really clever setup where the tables are built into the wall and you would lift the pieces individually like the benchs and the table itself
@julyg6022 жыл бұрын
Is a Dover elevator
@timothynash602 жыл бұрын
How to change a 3 bulb light fixture ballast 120volts 60 Hertz . 95 Amps.80 Amps. To a120-277V
@fredcdobbs8232 жыл бұрын
Didn't know what a "tombstone" was at beginning of video, but after watching twice with and stopping video, I saw it was a two-hole socket (shunted?) which I think is the problem in my light.
@railfanssm86723 жыл бұрын
Have you been to a school named O.L.O.L
@homeguestunton3 жыл бұрын
Fluorescent has to be the most hated light source in the whole entire world, They think there creepy even though there not, I still don’t like fluorescents, And hate incandescent.
@homeguestunton3 жыл бұрын
Fluorescent was really popular in the 90s and 2000s.
@LVFiretech3 жыл бұрын
Don’t forget about there’s also mode on the fire dept mode Called reset
@buckingalong3 жыл бұрын
very good and easy to do...
@tormenthernandez78373 жыл бұрын
Adjust your DOL limit , take care of that first buddy so your door close sequence could commence quicker.. during fire 🔥 service phase 2 I didn’t see you try to brake the electric eye the sensor needs to be bypass during fire service phrase 1 and phase 2 In case there is smoke 💨 in front of the sensor on the door if it has an electric eye Also make sure when you on a landing away from the recall floor turn phase 2 off to see if it returns back to the recall floor this applies to newer elevators in case there is a fire 🔥 you turn phase two off and the car returns to recall floor to get the other firefighters 🧯 so they could access the car and go help the rest of the team..., Safety first stay safe buddy
@ECFE3 жыл бұрын
I hope this didn't pass. That door operator needs adjustment or replacement, and the alarm should not be going off/fire hat flashing after the door opens
@RJN06073 жыл бұрын
4:07 I plead guilty, your honor.
@josephmontague20783 жыл бұрын
Lol
@noahharris22603 жыл бұрын
I’ve never done fire service or independent service on an elevator before I’ve used an elevator key to access a restricted floor and a wheelchair lift elevator
Пікірлер
Finally, somebody gives an explanation in a short manner and doesn't try to be a television actor with 10 minutes of crap. thank you sir great explanation
There seems to be a relay problem with this elevator because when the doors are open they jitter each second
If you worked that slow at my school, you would be there until 4 in the morning.
Side so where is my 401k and checks my I'd was lost....
She missed a lot of spots sweeping
What if it just blow cold air
The high school I attend as a kid has a problem where one kid will go into a random bathroom and take the soap despenser off the wall and shove it down the toilet and Ive actually seen it happen and reported it to a nearby teacher so the janitor can take care of it and I certainly hope they catch the kid who did it
Can’t add to My Favorites bookmark. Actions cannot be edited. Iphone 15 bad bad bad
What size are the filters
10.5"x64"x3/4" fiberglass
Thanks great video
Does it matter which hole the wires go into?
No
Just a few things to point out here: 1) In Phase I fire service, once the elevator reaches the first floor and doors completely open, the Firefighter hat should become completely stable and should not be blinking. The blinking hat signifies there is a door operator fault, or the smoke detector/sprinklers were triggered in the shaft, which may result in a shunt trip cutting off all power to the elevator. 2) That faulty door operator should be fixed. It looks like its having a stroke. The door should remain stable in its open position and shouldn't keep bouncing like that. Needs help. 3) When performing an elevator inspection, in Fire Service Phase II, the door bumpers and electric eye should be checked to make sure that they don't reopen the doors even if they are triggered. 4) When not in Fire Service mode, the elevator's door access key should be tested as well to make sure it's functional. 5) Probably not a default procedure, but when inspecting an elevator, the alarm bell should be tested to make sure it works. With all of these issues pointed out, I'm actually surprised to find out that the inspector actually passed the elevator inspection. Not very cool.
Make sure to place a wet floor sign down
Most quietest dover impulse hydraulic elevator Ive ever heard on a video
You lost me when you hooked the red wire up to the yellow.
Worst video ever filmed.
Do you have a video on how to replace Single Pin FA8 Tombstone?
Baffles me how they think using the same cloth that has touched the bottom of a toilet/urinal on the flush handles and seats qualifies as reducing cross contamination. Not cool. Very unacceptable work.
For most elevators, If the helmet is flashing like that it means there has been a fire alarm activation in the shaft and you cannot ride that elevator
That’s a high neck plunger you’ve got and those do know how to pack a punch.
can you add some real work, like, change the water valve, terminal equipment controller, or even just the motor fan? there is not much info on how to do this things, Thank you!
I was waiting for your badge to get sucked in to the squirrel cage.. now that would have been entertainment
How often do you change filters, What about the filter behind the blowers? Don't you change those?
Girl u can't even clean a restroom..so cleaning a classroom is even worse..no ma'am go sit down
That's not how you clean..that's DISGUSTING SHES CROSS CONTAMINATING!!!! UGH THESE PEOPLE...
What kind of wax is on the floor
Make sure you change can liners
I also remember seeing some schools where they will put a cover over the pull station so if a kid walks by and slips they dont accidentally pull it but some owners of schools can not get the idea of safety covers over fire alarm stations in their heads like they really want to see a kid accidentally pull it and get in trouble.
And also schools have this new thing where if something was going on and someone needed to pull the alarm they can press a button and it will dial the principle and they can explain somethings going on and they will set it off but they dont put a cover on the button to prevent it accidentally being pressed
That's really cool
OOO it's a Dover!
A few of the local schools where I live have this really clever setup where the tables are built into the wall and you would lift the pieces individually like the benchs and the table itself
Is a Dover elevator
How to change a 3 bulb light fixture ballast 120volts 60 Hertz . 95 Amps.80 Amps. To a120-277V
Didn't know what a "tombstone" was at beginning of video, but after watching twice with and stopping video, I saw it was a two-hole socket (shunted?) which I think is the problem in my light.
Have you been to a school named O.L.O.L
Fluorescent has to be the most hated light source in the whole entire world, They think there creepy even though there not, I still don’t like fluorescents, And hate incandescent.
Fluorescent was really popular in the 90s and 2000s.
Don’t forget about there’s also mode on the fire dept mode Called reset
very good and easy to do...
Adjust your DOL limit , take care of that first buddy so your door close sequence could commence quicker.. during fire 🔥 service phase 2 I didn’t see you try to brake the electric eye the sensor needs to be bypass during fire service phrase 1 and phase 2 In case there is smoke 💨 in front of the sensor on the door if it has an electric eye Also make sure when you on a landing away from the recall floor turn phase 2 off to see if it returns back to the recall floor this applies to newer elevators in case there is a fire 🔥 you turn phase two off and the car returns to recall floor to get the other firefighters 🧯 so they could access the car and go help the rest of the team..., Safety first stay safe buddy
I hope this didn't pass. That door operator needs adjustment or replacement, and the alarm should not be going off/fire hat flashing after the door opens
4:07 I plead guilty, your honor.
Lol
I’ve never done fire service or independent service on an elevator before I’ve used an elevator key to access a restricted floor and a wheelchair lift elevator