Is there an adjustment that I can make for a few more ounces of water? I use large mugs.
@1AtlantaKidАй бұрын
Thank you for this quick fix, you saved me a new unnecessary purchase.
@dmesser4562 ай бұрын
thanks guy! My son kept saying, "Dad, play that part in the beginning where he's screaming!" HaHa Thanks for showing how to do it! Original part price is outrageous! I thought I got a helluva deal at 5 dollars, but you smoked me with the two for 6 deal!
@Kat-wv8sk2 ай бұрын
the intro was so relatable! lol, exactly what I am experiencing.
@TheNewSoda2 ай бұрын
Would it be a bad idea if I was to straighten the key out and then try to get a copy of the same key that was originally bent
@AntoniniPlays55952 ай бұрын
How can I do it without an adapter?
@TheWarnickthree3 ай бұрын
I understand that you make more air going into the can, but what if you are not able to swallow the beverage as fast as it is coming out?
@dr_doritotf23053 ай бұрын
Tried it and got halfway before it hurt my stomach lol, I’ll need to practice more with sodas I don’t like but have to drink.
@walterbartels39943 ай бұрын
Like everyone else, mine broke and the replacement parts never seemed to go on right. Found your video and still couldn’t quite get it right and I noticed someone mentioned pouring hot water on the handle and lo and behold, it went in and I could hear the snap against the door. You learn something new everyday.
@bigslimm73 ай бұрын
I needed to see how to remove the handle tho
@lorichristineflorida30204 ай бұрын
That still don't work
@braydenchartrand57484 ай бұрын
Worked like a charm!
@JeanWurl-nk8gu5 ай бұрын
👍
@lunnardo5 ай бұрын
Thank you, different p-trap but it got fixed with your guide.
@motheroftheyear19735 ай бұрын
Thank you!!! I was about to replace mine!!! It works!!! 🎉
@brendaricks32955 ай бұрын
Yes it works,But why it's happening to a new one? Gotten it for Christmas 🤦
@crazyBTD6 ай бұрын
honestly the name has a new meaning
@almedellin17086 ай бұрын
Thank you
@dimaimapereiragomesbedim92657 ай бұрын
Thank you I appreciate it 😀
@reg0505057 ай бұрын
How long is that pin that u used? How much of the pin do u put in... it did not work for.me.
@maryoriacicle32877 ай бұрын
Saved me a $50 key replacement fee!!! Thank you so much !!!!🫶🏽
@crispinroberts44497 ай бұрын
Appreciate the info, I will try to put that in my brain for later, but it turns out my power distribution board is weak. The output to the brew pump was only putting out 4vdc instead of 12vdc. I’m just going to part this one out for future spares and buy a new one.
@ericsipco74877 ай бұрын
Thank you a hundred times. We just had a terrible problem on Thanksgiving, but fixed it after watching your video.
@autumncolors16738 ай бұрын
Instructions start at 2:03
@bryanrizzo93778 ай бұрын
I own a 1997 chevy lumina and my car key only has a slight bend and that's very little to nothing. I can put my car key in the ignition and it's been starting with no problem at all. I can get the key out of the ignition as well.
@lynnbanks79208 ай бұрын
It worked!!
@mucqqx9 ай бұрын
No dad?
@mucqqx9 ай бұрын
No problem!
@randomthoughts20959 ай бұрын
This is how I felt today as that happened. Ugh. Thank you for the video!!!
@Chispaluz9 ай бұрын
Solid
@ShauneArnoldEsq9 ай бұрын
That scream tho! It was exactly right!!!
@brycefujimoto80239 ай бұрын
I just did this technique to an OEM 2015 Toyota Corolla LE key. The hammer kind of damaged my key with scratches. I used 2000 grit and 2500 grit wet/dry sandpaper to bring the mirror shine to it. I used Brasso at the end to clean up the key.
@bryanrizzo93778 ай бұрын
I own a 1997 chevy lumina and my car key has a slight bend which is very little to nothing. To make it real simple I can still start the car and get the key in and out of the ignition without wiggling or having any problem. I didn't risk hammering it because again it was only a slight bend and not enough to wear I'm at the point where I'm effed and I wouldn't even be able to get the key in the ignition let alone start the car. Unless u want to make the bend in your car key worse use a hammer folks but I didn't risk it. It could snap and then your SCREWED. I have a used car so I doubt I even have a spare car key and thats part of the reason why I didn't try to straighten the car key because that's the only one I have for the ignition.
@kushpaladin3 ай бұрын
@@bryanrizzo9377 take your key to locksmith. you will be sh*# out of luck if something happens to that key. since it's already bent it could snap inside of the ignition, even if you didn't take a hammer to it
@Path2Healthy10 ай бұрын
Mine wasn't broke but I jammed the extension wand and this helped me put it back together once I got it out, thank you!!! My hubs had to use silicone and a lot of force. 😂
@laguera2h10 ай бұрын
Thank you for this !!!
@sharilacy828010 ай бұрын
Hi. My wand is stuck in the machine. Any ideas?
@fatimaorrie931710 ай бұрын
Thank you so much you saved my key and I am so grateful right now
@JayPetrick-yd8nz10 ай бұрын
Thanks for showing how to snap it in. I already bought a replacement and didn't watch your video first, so it broke in a matter of days. Just snapped a replacement in following your video and it is perfectly repaired.
@aljsegovia11 ай бұрын
Thanks. So much info condensed in few minutes and well explained.
@dougiedotcom11 ай бұрын
Good channel and the video helpful
@cassaundryadozier187111 ай бұрын
So easy!!!!
@lukesenseney1045 Жыл бұрын
Stupid easy fix, but still glad you made a video. Anytime you have to apply pressure it's good to know you're doing it right.
@dentalcare1122 Жыл бұрын
Use iPhone as keyboard with charging cable max
@carrot5705 Жыл бұрын
My handle is only half broken. Would be nice if your video showed the best way to unhook the end that still has a good hook.
@melissabyrd131010 ай бұрын
SAME! It's annoying opening it. One tab is broke and don't know how to get it off.
@Speedlikesmeat Жыл бұрын
Whose dad teaches them how to shotgun a bear... PLSS TELL MEEE :D
@JoseRamos-wb1fr Жыл бұрын
Thanks for a great video, just forgot one thing; how to open the door with a broken handle?
@lukesenseney1045 Жыл бұрын
I slipped a butter knife through the middle hole and used it to get leverage to open the door. It was comfortable enough I lived with it for several months till my fiancee told me a proper repair was required for her to move in.
@dominiquemartin4947 Жыл бұрын
Thanks! worked for me & held so far.
@kathy4666 Жыл бұрын
THANK YOU!!!!!👍🏻
@charnellemonay Жыл бұрын
Thanks hope this works for me
@Nam-ri4rh Жыл бұрын
thank you so much <3
@sparklingdinosaurturtle Жыл бұрын
Thank you for this video. I learned today that rice shouldn't go down the disposal because it expands and causes the pipe to clog. 😱 Clearing the p trap fixed it right up! There was a lot of water, but it got cleaned up fine using a bunch of towels 🙃
Пікірлер
Worked like a champ!!
Is there an adjustment that I can make for a few more ounces of water? I use large mugs.
Thank you for this quick fix, you saved me a new unnecessary purchase.
thanks guy! My son kept saying, "Dad, play that part in the beginning where he's screaming!" HaHa Thanks for showing how to do it! Original part price is outrageous! I thought I got a helluva deal at 5 dollars, but you smoked me with the two for 6 deal!
the intro was so relatable! lol, exactly what I am experiencing.
Would it be a bad idea if I was to straighten the key out and then try to get a copy of the same key that was originally bent
How can I do it without an adapter?
I understand that you make more air going into the can, but what if you are not able to swallow the beverage as fast as it is coming out?
Tried it and got halfway before it hurt my stomach lol, I’ll need to practice more with sodas I don’t like but have to drink.
Like everyone else, mine broke and the replacement parts never seemed to go on right. Found your video and still couldn’t quite get it right and I noticed someone mentioned pouring hot water on the handle and lo and behold, it went in and I could hear the snap against the door. You learn something new everyday.
I needed to see how to remove the handle tho
That still don't work
Worked like a charm!
👍
Thank you, different p-trap but it got fixed with your guide.
Thank you!!! I was about to replace mine!!! It works!!! 🎉
Yes it works,But why it's happening to a new one? Gotten it for Christmas 🤦
honestly the name has a new meaning
Thank you
Thank you I appreciate it 😀
How long is that pin that u used? How much of the pin do u put in... it did not work for.me.
Saved me a $50 key replacement fee!!! Thank you so much !!!!🫶🏽
Appreciate the info, I will try to put that in my brain for later, but it turns out my power distribution board is weak. The output to the brew pump was only putting out 4vdc instead of 12vdc. I’m just going to part this one out for future spares and buy a new one.
Thank you a hundred times. We just had a terrible problem on Thanksgiving, but fixed it after watching your video.
Instructions start at 2:03
I own a 1997 chevy lumina and my car key only has a slight bend and that's very little to nothing. I can put my car key in the ignition and it's been starting with no problem at all. I can get the key out of the ignition as well.
It worked!!
No dad?
No problem!
This is how I felt today as that happened. Ugh. Thank you for the video!!!
Solid
That scream tho! It was exactly right!!!
I just did this technique to an OEM 2015 Toyota Corolla LE key. The hammer kind of damaged my key with scratches. I used 2000 grit and 2500 grit wet/dry sandpaper to bring the mirror shine to it. I used Brasso at the end to clean up the key.
I own a 1997 chevy lumina and my car key has a slight bend which is very little to nothing. To make it real simple I can still start the car and get the key in and out of the ignition without wiggling or having any problem. I didn't risk hammering it because again it was only a slight bend and not enough to wear I'm at the point where I'm effed and I wouldn't even be able to get the key in the ignition let alone start the car. Unless u want to make the bend in your car key worse use a hammer folks but I didn't risk it. It could snap and then your SCREWED. I have a used car so I doubt I even have a spare car key and thats part of the reason why I didn't try to straighten the car key because that's the only one I have for the ignition.
@@bryanrizzo9377 take your key to locksmith. you will be sh*# out of luck if something happens to that key. since it's already bent it could snap inside of the ignition, even if you didn't take a hammer to it
Mine wasn't broke but I jammed the extension wand and this helped me put it back together once I got it out, thank you!!! My hubs had to use silicone and a lot of force. 😂
Thank you for this !!!
Hi. My wand is stuck in the machine. Any ideas?
Thank you so much you saved my key and I am so grateful right now
Thanks for showing how to snap it in. I already bought a replacement and didn't watch your video first, so it broke in a matter of days. Just snapped a replacement in following your video and it is perfectly repaired.
Thanks. So much info condensed in few minutes and well explained.
Good channel and the video helpful
So easy!!!!
Stupid easy fix, but still glad you made a video. Anytime you have to apply pressure it's good to know you're doing it right.
Use iPhone as keyboard with charging cable max
My handle is only half broken. Would be nice if your video showed the best way to unhook the end that still has a good hook.
SAME! It's annoying opening it. One tab is broke and don't know how to get it off.
Whose dad teaches them how to shotgun a bear... PLSS TELL MEEE :D
Thanks for a great video, just forgot one thing; how to open the door with a broken handle?
I slipped a butter knife through the middle hole and used it to get leverage to open the door. It was comfortable enough I lived with it for several months till my fiancee told me a proper repair was required for her to move in.
Thanks! worked for me & held so far.
THANK YOU!!!!!👍🏻
Thanks hope this works for me
thank you so much <3
Thank you for this video. I learned today that rice shouldn't go down the disposal because it expands and causes the pipe to clog. 😱 Clearing the p trap fixed it right up! There was a lot of water, but it got cleaned up fine using a bunch of towels 🙃