You sir are the man, helped me out after i felt defeated...
@19eightyforeisnow7 күн бұрын
Just got one if these today, its in mint condition but i cant figure out what its worth, any idea?
@extremebudget6 күн бұрын
You found one just like this one? Where did you find it? As far as I'm concerned there isn't a way to value it because they don't make them any more. Prices for new incinerator toilets are insane. Even used ones are expensive. $1,200 is probably in a ballpark value for a used one.
@19eightyforeisnow6 күн бұрын
@@extremebudget I'm in Fairbanks, someone gave it to me who was ckean8ng out a shed on a property they bought. It's never been used, pretty neat , but like you said I can't find any info online besides yiur video.
@19eightyforeisnow6 күн бұрын
@@extremebudget yes it's exactly the same one as you have in video
@extremebudget4 күн бұрын
@@19eightyforeisnow Oh okay. I think they were manufactured in Salt Lake city for a while way back when. It said patent pending on it so it was probably a new business at the time. I found mine in Southern Utah.
@G8rquest9 күн бұрын
'70s product Ron Popeil's Ronco Pocket Fisherman. My step-brother had one. Keep on keepin' on.
@MyFriendlyPup9 күн бұрын
Very cool
@josieann503111 күн бұрын
It seems this project was a bit too much. It was listed for sale a few months ago. The asking price is 30k. The description states that it's for demolition only.
@extremebudget9 күн бұрын
Probably won't get 30K from it but Its is worth more selling than fixing right now in the market. The tiny house and garage living space I built added value to the property. I learned a lot. I'll probably do a video on that.
@coldspring2216 күн бұрын
I always did it by putting some silicone sealant around the tire rim and it always works, no need to even seat beads on one side of tire. But since silicone sealant became so expensive, I have to learn a new way. Your method works, but one additional trick I needed was to spray soap water all around the rim as I press down on the tire/pump in the air. With soap water it's really easy to see where the gap is where the air is escaping and adjust to seal it. Thanks
@MyFriendlyPup16 күн бұрын
Have a premiere for the pilot. 100%
@ChrisRobba17 күн бұрын
I think a lot of us want to see the journey no matter what it is. Keep being humble but don’t doubt what you have to offer us as viewers, if things go well the pilot could expand your audience on KZread you never know.
@extremebudget16 күн бұрын
Good thought I hope so.
@desire4liberation17 күн бұрын
harry potter? disney? ummmm
@richard5117 күн бұрын
You want to do something positive? Start repairing the foundation on your 5k house.
@desire4liberation17 күн бұрын
bingo
@alittlepieceofearth17 күн бұрын
I would love to see a trailer. It's the best way to get a Kickstarted started.
@EmpressVicky011617 күн бұрын
Hey thank you for sharing. But don’t let your channel die, once you start making more funds, you can get back into your original plan for the house. I wish all the best.
@Felix-tz1tk23 күн бұрын
There is an interview of david wilcock, where he say some primary and secondary winding is wound on crystal. Upon reaching some voltage and frequency on primary winding, the crystal produce blue light. This distort the gravitational waves. Its easily detected by special people who wear hats and pin point urhouse from helicopter.
@moai56526 күн бұрын
tip:the more white the quartz is more efficient
@zhaochen2487Ай бұрын
Took me a couple of hours to figure out the same method a few years back. The human brains definitely have a similar design 😄
@ThelongmanableАй бұрын
*_.02 volts nothing to write home about for sure lol 😆 😅_*
@ThelongmanableАй бұрын
*_When you crushed you increased the surface area making it more conductive!!!_*
@daddad4589Ай бұрын
Great idea Ima gonn a try this!
@samwagler6676Ай бұрын
Wow, Jason Statham has really fallen on hard times
@libertyforamericanowАй бұрын
Is that that gulp bait? That s*** says it causes cancer on the package
@darrelfloberg9124Ай бұрын
Thank you so much! I tried everything to make bead contact with the rim. I tried for hours. This did the trick in a jiffy. Thank you to guys like you!
@natividadtorres2149Ай бұрын
Where’s the rest videos of this project
@natividadtorres2149Ай бұрын
You don’t need permission from the city to convert it into living space
@bert1913Ай бұрын
Convoluted... Blocked!
@kevinhamill1225Ай бұрын
Thankyou!! I am going to try this...I have the same issue.
@608kendallАй бұрын
Thanks for the update! Always great to see you on here!
@tombstone2826Ай бұрын
Great scooters !
@MyFriendlyPupАй бұрын
Thank you bro. I spent 200 volunteer days on sets in film school. Hurry up and wait.
@extremebudgetАй бұрын
haha! yep :)
@MyFriendlyPupАй бұрын
Dry ice!? Bro...
@extremebudgetАй бұрын
Yeah. we were experimenting with that for the first time. didn't really work like we hoped, but it was fun
@evanmeier3570Ай бұрын
Keep the faith Barry. Your big break is on the horizon.
@wisdomafoolweakness3391Ай бұрын
The guy who sold it died and his site was shut down i feel he was killed
@MyFriendlyPupАй бұрын
The channel is about YOU not the house. If you are filming give us short snippets. Happy to see some behind the scenes.
@barrysines4593Ай бұрын
Thank you. I appreciate that. :) Ill see if I can figure out something with behind the scenes
@MyFriendlyPupАй бұрын
Amazing. Id love to see thr gorilla filming setup. What camera, lenses, lights, handheld or tripod.
@scottsachs2547Ай бұрын
Thanks for the update! Wish you all the best!!
@CyberAndy_Ай бұрын
I'm gonna be homeless soon and am really scared. I am trying to find a van
@extremebudgetАй бұрын
All I can say is pray to the good Lord for intervention. Mark 11:22-24 - And Jesus answered them, “Have faith in God. Truly, I say to you, whoever says to this mountain, ‘Be taken up and thrown into the sea,’ and does not doubt in his heart, but believes that what he says will come to pass, it will be done for him. Therefore I tell you, whatever you ask in prayer, believe that you have received it, and it will be yours."
@CyberAndy_Ай бұрын
why did you need to tear it all apart to fix just the foundation?
@extremebudgetАй бұрын
there is a lot more to it than that, but it's mostly my focus on my current path. I'm living comfortably in my other living space for now.
@MyFriendlyPupАй бұрын
Give us some behind the scenes, mics, camera and lighting
@Krlowanigu-mg6egАй бұрын
Oh, so you ruined the house and now want to sell it????? All possible excuses, i understand the obstacles in life but I do not see consistency. I do not see adaptation, you cannot focus on one thing. What a waste of the house!
@Krlowanigu-mg6egАй бұрын
Oh, so you ruined the house and now want to sell it????? All possible excuses, i understand the obstacles in life but I do not see consistency. I do not see adaptation, you cannot focus on one thing. What a waste of the house!
@rockspoon6528Ай бұрын
Great idea! I couldn't even get the bead fully seated on 1 side, but having that side partially seated made it possible to seat the bead the rest of the way with some careful pressure on the tire to push it into the wheel and an air compressor.
@wayneclarke2890Ай бұрын
I'm so happy you covered Mike Hanz. I was following his channel and believe in his technology, especially his solid state generator. Very promising.
@michoacanos79Ай бұрын
my guy great video i live in a small town far from the city i order tires for my car trailer and my tire shop was closed so i had to do this my self i strugle alot to get this done as many of the guys her i look for easy ways to do this and wow in less than 10 minutes i got them done man i thank you for such a great video so helpfull A+++ thanks again bro 👍👍👍👍👍👍
@genevieveogormanАй бұрын
I think the rocks alone would cost more than $300
@TomBob-mg4ucАй бұрын
yes but how is the bottom bead set?
@jimibrown4224Ай бұрын
Just use brake clean and a lighter! 😅
@halilka98532 ай бұрын
I know how it works. I can help...
@nataliecoe67492 ай бұрын
Where are you living if you are selling your $5,000 house?
@nataliecoe67492 ай бұрын
Selling your home?????
@johnnyowens67572 ай бұрын
I used to have a gas station and tire repair. I did that quite often , I can tell you one thing I did different instead of laying it down to air up , I leaned it against the wall at about a 45 degree angle and push in on the center gently like and usually seal right up.
@Findmylimit2 ай бұрын
yeah hows this guy doing now? any follow ups or connections to him to see his current status
Пікірлер
You sir are the man, helped me out after i felt defeated...
Just got one if these today, its in mint condition but i cant figure out what its worth, any idea?
You found one just like this one? Where did you find it? As far as I'm concerned there isn't a way to value it because they don't make them any more. Prices for new incinerator toilets are insane. Even used ones are expensive. $1,200 is probably in a ballpark value for a used one.
@@extremebudget I'm in Fairbanks, someone gave it to me who was ckean8ng out a shed on a property they bought. It's never been used, pretty neat , but like you said I can't find any info online besides yiur video.
@@extremebudget yes it's exactly the same one as you have in video
@@19eightyforeisnow Oh okay. I think they were manufactured in Salt Lake city for a while way back when. It said patent pending on it so it was probably a new business at the time. I found mine in Southern Utah.
'70s product Ron Popeil's Ronco Pocket Fisherman. My step-brother had one. Keep on keepin' on.
Very cool
It seems this project was a bit too much. It was listed for sale a few months ago. The asking price is 30k. The description states that it's for demolition only.
Probably won't get 30K from it but Its is worth more selling than fixing right now in the market. The tiny house and garage living space I built added value to the property. I learned a lot. I'll probably do a video on that.
I always did it by putting some silicone sealant around the tire rim and it always works, no need to even seat beads on one side of tire. But since silicone sealant became so expensive, I have to learn a new way. Your method works, but one additional trick I needed was to spray soap water all around the rim as I press down on the tire/pump in the air. With soap water it's really easy to see where the gap is where the air is escaping and adjust to seal it. Thanks
Have a premiere for the pilot. 100%
I think a lot of us want to see the journey no matter what it is. Keep being humble but don’t doubt what you have to offer us as viewers, if things go well the pilot could expand your audience on KZread you never know.
Good thought I hope so.
harry potter? disney? ummmm
You want to do something positive? Start repairing the foundation on your 5k house.
bingo
I would love to see a trailer. It's the best way to get a Kickstarted started.
Hey thank you for sharing. But don’t let your channel die, once you start making more funds, you can get back into your original plan for the house. I wish all the best.
There is an interview of david wilcock, where he say some primary and secondary winding is wound on crystal. Upon reaching some voltage and frequency on primary winding, the crystal produce blue light. This distort the gravitational waves. Its easily detected by special people who wear hats and pin point urhouse from helicopter.
tip:the more white the quartz is more efficient
Took me a couple of hours to figure out the same method a few years back. The human brains definitely have a similar design 😄
*_.02 volts nothing to write home about for sure lol 😆 😅_*
*_When you crushed you increased the surface area making it more conductive!!!_*
Great idea Ima gonn a try this!
Wow, Jason Statham has really fallen on hard times
Is that that gulp bait? That s*** says it causes cancer on the package
Thank you so much! I tried everything to make bead contact with the rim. I tried for hours. This did the trick in a jiffy. Thank you to guys like you!
Where’s the rest videos of this project
You don’t need permission from the city to convert it into living space
Convoluted... Blocked!
Thankyou!! I am going to try this...I have the same issue.
Thanks for the update! Always great to see you on here!
Great scooters !
Thank you bro. I spent 200 volunteer days on sets in film school. Hurry up and wait.
haha! yep :)
Dry ice!? Bro...
Yeah. we were experimenting with that for the first time. didn't really work like we hoped, but it was fun
Keep the faith Barry. Your big break is on the horizon.
The guy who sold it died and his site was shut down i feel he was killed
The channel is about YOU not the house. If you are filming give us short snippets. Happy to see some behind the scenes.
Thank you. I appreciate that. :) Ill see if I can figure out something with behind the scenes
Amazing. Id love to see thr gorilla filming setup. What camera, lenses, lights, handheld or tripod.
Thanks for the update! Wish you all the best!!
I'm gonna be homeless soon and am really scared. I am trying to find a van
All I can say is pray to the good Lord for intervention. Mark 11:22-24 - And Jesus answered them, “Have faith in God. Truly, I say to you, whoever says to this mountain, ‘Be taken up and thrown into the sea,’ and does not doubt in his heart, but believes that what he says will come to pass, it will be done for him. Therefore I tell you, whatever you ask in prayer, believe that you have received it, and it will be yours."
why did you need to tear it all apart to fix just the foundation?
there is a lot more to it than that, but it's mostly my focus on my current path. I'm living comfortably in my other living space for now.
Give us some behind the scenes, mics, camera and lighting
Oh, so you ruined the house and now want to sell it????? All possible excuses, i understand the obstacles in life but I do not see consistency. I do not see adaptation, you cannot focus on one thing. What a waste of the house!
Oh, so you ruined the house and now want to sell it????? All possible excuses, i understand the obstacles in life but I do not see consistency. I do not see adaptation, you cannot focus on one thing. What a waste of the house!
Great idea! I couldn't even get the bead fully seated on 1 side, but having that side partially seated made it possible to seat the bead the rest of the way with some careful pressure on the tire to push it into the wheel and an air compressor.
I'm so happy you covered Mike Hanz. I was following his channel and believe in his technology, especially his solid state generator. Very promising.
my guy great video i live in a small town far from the city i order tires for my car trailer and my tire shop was closed so i had to do this my self i strugle alot to get this done as many of the guys her i look for easy ways to do this and wow in less than 10 minutes i got them done man i thank you for such a great video so helpfull A+++ thanks again bro 👍👍👍👍👍👍
I think the rocks alone would cost more than $300
yes but how is the bottom bead set?
Just use brake clean and a lighter! 😅
I know how it works. I can help...
Where are you living if you are selling your $5,000 house?
Selling your home?????
I used to have a gas station and tire repair. I did that quite often , I can tell you one thing I did different instead of laying it down to air up , I leaned it against the wall at about a 45 degree angle and push in on the center gently like and usually seal right up.
yeah hows this guy doing now? any follow ups or connections to him to see his current status