Welcome to my channel! My name is Chris and here on my channel I do interactive livestreams with my viewers and I seek out the products I believe in and want to share with you. Every product has a down side or flaw and that is never hidden here on my channel. QC stands for quality control so flaws or short cuts don't go without mention.
I love tech and know tech which separates me from other channels that just use the word tech.
My current platform I hope to stick with is drones, electric vehicles (EV's) and laser engravers/cutters.
This channel supports Children's Hospital free care fund charities so please use my links & donations to my PayPal.
www.paypal.com/paypalme/cswade88
Thanks!
Need your drone repaired? I do that too!
Email me @ [email protected] and I will get you fixed up and back in the air at a minimal cost compared to others with 100% quality and care for your equipment. If it's broke I can fix it!
Пікірлер
Very nice but I bought Genuine DJI white goggles for my mavic pro platinum for less than the cost of the mask :)
Man I love you, I've been searching a way to unbrick my controller for 3 days.
Hello! Hope you see this and can maybe lend some advice. I bought a Zino Pro Plus a bit back, but didn't fly it right away. When I did, I thought it was awesome. Took a break and then went to fly it again and while about 20 feet in front of me and about 15 feet up the motors just stopped and it dropped to the ground. I did hear something about usb connection right as it happened. Long story short, I found that the controller was bad (would charge but not turn on). I then bought a zino pro drone, controller, etc. hoping to use the controller and also get another drone out of it. What I found out was that the camera on the zino pro did not work. I also found out that the x-hubsan 2.0 app no longer worked and wanted to do an update but then threw out errors that it couldn't do anything. I am addressing one thing at a time. Any ideas about the 2.0 app? No matter where I get it from, it gives me the same error AND it also says that the app is not compatible with the device via usb. YET, no problem when using the x-hubsan app for the zino pro. As for the gimbal and camera - is there any way to test these to determine if the camera itself is bad or a ribbon or ???? Thanks!
Hey man would there be any easy way to pull 5V from this drone to power an external equipment such as a parrot sequoia?
It's a heavy bird at 700g? for sure.
Dobra robota... ciekawy film... pozdrawiam🙂
Flew mine yesterday first time for a while flew beautifully , hung in the sky like a UFO.
Muito obrigado! Ajudou demais! Vc só esqueceu de ligar o cabo do led da frente do drone! Gratidão!
Thanks ✌️ As mentioned the customer sent a mini se and that frame was not available then so he went with this frame.
Thanks!! I have struggling with connecting the RC Pro with the Mic2 receiver for a week. I’m glad I listened to this because I would have never, ever, thought to raise the gain. As soon as I raised it to 12 I could hear. Crazy the two different DJI products do not have better integration. Guess they don’t talk across divisions. Thanks for this clip!
I definitely getting a 4200 mah GIFI or even two of them, I want 20 + mins flight time.
I have no experience with the first version, but i bought the second version, which i think was called Dronemask 2. The quality of the product is excellent and i woyld have kept them, but i had a terrible time with the lense fogging up. This was in mid summer and temps in the 90s F, but it made them unusable for me. I wish they could add a small fan yo provide dome air movement. Other than this, they seemed to be a great product.
Thanks for the help.
i want to buy a cable gimbal camera( no.EX100045-03) hudsan zino1 where can
I need help how do I contact you
I don’t think the 15-22% comment is the issue. The BMS in the battery is probably set to protect the battery. They need to be willing to sacrifice the battery to protect the drone. Let the battery go into complete failure mode before shutting off like DJI does.
ผมจะสั่งซื้อcable gimbal EX10001-03 ได้จากที่ไหน
any idea how to level the gimbal?
Zino pro always shows aircraft disconnected… any help will be appreciated
@@coachronald send me a video clip of your app screen when you are going through the connection process and provide any information you can like what color the light on the side next to the sd card slot is showing. [email protected]
@@QCGUYwill do. Many thanks
Is there an active hubsan group where I can find assistance with the drone? Many thanks
@@coachronald here’s my group where you can post and share the video clip I requested as well. facebook.com/share/fTHRLYedvJo3m259/?mibextid=K35XfP
@@QCGUYalready sent my application… thank you
link
Thank you for this video!! After years of flying GPS drones, I got into FPV the last year and a half. There's nothing like it, I love it! But the skills I've gained from building FPV quads, I finally had the courage to replace the back left arm of my X8 2022 V2. And thanks to your video it was a piece of cake!
Getting a couple new batteries and want to start off with the hobby charger. I"m not clear on how to actually connect the Zino Pro battery to the hobby charger. Is this a cable or adapter of some sort?
How might this setup be accomplished with the DJI Goggles and mini 3 pro instead of the RC remote?
Hi Chris, Does this also work for the EXO Blackhawk Pro 3, which is a Hubsan Drone? I have done the Error Code 0800 calibration through the App on my phone and the gimbal is still not operational. No, I did not crash it. It worked fine yesterday, today it is not working at all. Thanx.
and the other port usb ?
Hello Chris, I have no pins on my transmitter but a switch instead ! Should I keep this switch pressed in during the upgrade ? Henry
thank you for the video i have a question. my drone fell from a distance about 20 feet due to leaves but it hit grass when it landed. but one of the screws that holds the joint to the body came out a bit sort of stripped out half way. I screwed the joint screw back normal and it does hold... for now will i have to buy a new body to fix the stripped screw hole?
👍🏽😂😂😂 Great info and video
what screw driver is required to open to case?
If I send you my zino.. can you fix it?
I don’t know what’s wrong with it but yes I can fix anything and have every part for that drone. Email me [email protected]
You talking nonsense bro.. it usnt a dam copy,its a partnership,u dumb f..k
Thank you. Is there a tool to diagnose transmitter joysticks?
I cant get mine to connect to my new controller at all, I followed this to the T but mine just keeps beeping for like 60 seconds then nothing. the app won't update any firmware either I got like 1019 for RC and 1019C for RC relay and my camera and vision show as N/A. it feels like fimi intentionally messed up the 2020 to get people to buy the 2022.
did they kill support for the 2020 fimi x8 se? the app runs on my android I got picture from my drone camera but nothing else works the lights are red on the remote for bad connection, I go into firmware and my RC firmware is 1019 and my RC relay firmware is 1019C but theres no updates except for a no fly zone thing but when I click update it just says something about no camera, which my camera firmware shows as N/A
Chris, have you ever identified where the speaker is located, and how one might go about removing it or disabling the start up beeps?
Do you still have your Autels? Did they ever fix the crabbing issues, with Firmware updates? I have several DJI drones, AIR 2S, Mini 3, Mini 3 Pro, Mini 4 Pro, AIR 3 & FPV Drone. I just bought the Evo Lite + Premium Bundle & im contemplating sending it back. I wanted a non Geofenced drone, with a decent quality camera. But I've heard a lot of nightmare stores about Autels customer service, being pretty much non-existent. I would hate to open it up, & have my drone have issues that Autel wont help with.
Great video Chris. Wouldn't have been able to repair my gimbal cable without it. The only problem is that I tore the barometer cable in the process! Do you know where I can get one? I've tried Hubsan & Ali Express with no luck.
Email me a picture showing both sides of the cable so I can see which yours is and I’ll see what I can do. [email protected]
I like your vidio ser...
Thanks Chris, I truly appreciate this video. Even the dropped/missing screw is informative, you showed not only how to replace the arm but all the little irritations that go on when doing these finicky jobs. Great video.
that drone is Slow -_- Faith Mini 2 can do 14 meters a second in sport mode -_-
how to know if the cables are broken?
Gimbal codes will appear in the app
@@QCGUY no wifi..always flashing red sir
@@crisdeeclavel7772 original zino?
@@crisdeeclavel7772 Image cable is almost always the cause of no WiFi.
@@QCGUY yes but i bought it online second hand.. i was fooled
YOU ARE THE ONLY TECH THAT SHOWS THIS. YOU ARE THE BEST. SINCE DJI ARE UP IN THE AIR I WOULD GET MY OTHER FLYERS WORKING. THANK YOU AGAIN.
❤hello sir😊, I like look of hubsan zino 2 plus, thinking of buying one.Q: how many times do you fly it per day, and how long have you owned it for, I am considering this or XMRC11 Turbo from Banggood, would source zino of eBay.😊😊, thanks for any tips. Rob
What about the frontal led cable?
It wasn’t on this model but once you are this far it’s not rocket science to figure out that you just unplug it and remove it. The glue is the biggest obstacle though…
@@QCGUY Yes, I managed to remove it, it was not easy to remove the small board with the LED because it was attached very strongly with glue or double-sided tape. even with the small cable you have to be very careful where there is glue. Thanks for the reply and for your great work
@@QCGUY Hi, I would like some help please. I received the middle frame to reassemble from Aliexpress today, none of the screw holes are threaded. how can I do?
@@stefanogiunti5832 It’s plastic, it will self thread.
How do you perform rth with this setup?
Back in the air with your help - thanks.
Happy to help and happy you were able to get back in the air. ✌️
I am trying to figure out how to change the front arms. The grey wire is difficult to get to. I'm not sure what all has to come apart to fix it.
I have a video for that I haven’t uploaded yet but you remove the two screws inside the battery bay then pop the belly off to get two where the gray antenna wire connects. It just slides through a whole down the side of the drone from the top to the underside.
Has firmware updates helped this drone out? I just ordered the Evo Lite Plus Premium Bundle a few days ago, I have a DJI AIR 3 thst I absolutely love and a DJI Mini 4 Pro, Is the Evo Lite plus comparable to DJI?
How much do you charge to replace mid frame on a mini 2?
[email protected] for service inquiries.
Thank you very much ❤️🙏🇹🇷