Пікірлер

• 
  @leonardalcantara143516 күн бұрын

  How did you pull the wire off the grommet? (at 2:25)

• 
  @bettertogetheradventures21816 күн бұрын

  @leonardalcantara1435 there's a plastic clip that separates by pulling up on one half, then you just pop the wire out. Or you may be able to press in the barbs through the front of the cowl and pop the whole clip out of its mounting hole.

• 
  @terrywynn611319 күн бұрын

  No I think that bike belongs to Fee Fie Foe or Fom, one of them probably forgot where they left it 😂😂😂😂😂🤣🤣

• 
  @bettertogetheradventures21819 күн бұрын

  @@terrywynn6113 🤣

• 
  @Horsecatcher19 күн бұрын

  Idk Davis California has one that might be bigger.

• 
  @bettertogetheradventures21819 күн бұрын

  @@Horsecatcher I've heard about it, but never did see that one.

• 
  @Horsecatcher19 күн бұрын

  @@bettertogetheradventures218 it's one of those old big front tire bikes. It's been there for ever

• 
  @tonygiraldes7848Ай бұрын

  Necessity is the mother! 🙂

• 
  @charmontravelАй бұрын

  I love that you jumped on your own bike and are bringing with you a wealth of knowledge and notes of caution. I'll be watching for your future videos!

• 
  @bettertogetheradventures218Ай бұрын

  Thank you so much. I really do appreciate it.!

• 
  @danielbondy4361Ай бұрын

  Should be able to flip that plate and bolt onto passenger pegs

• 
  @bettertogetheradventures218Ай бұрын

  We didn't think of that. Thank you. We'll take a look at that tomorrow.

• 
  @tonygiraldes7848Ай бұрын

  Nice video 🙂👍

• 
  @bettertogetheradventures218Ай бұрын

  Thank you!

• 
  @user-de7bd7bx1iАй бұрын

  This excellent, thanks for posting it. I'm a bit confused though - the GS100A is the flashing unit but what lights are you using, (the ones you attached on either side of the license plate)?

• 
  @bettertogetheradventures218Ай бұрын

  Thank you, we really do appreciate you watching. The lights are just a cheap strobe light we purchased off Ebay.

• 
  @arielserrano13802 ай бұрын

  How long should I do my oil changes on my Honda nc750?

• 
  @bettertogetheradventures2182 ай бұрын

  It's recommended to do it every 8,000 miles. We like doing it in the spring before the riding season begins

• 
  @tonygiraldes78482 ай бұрын

  I’m surprised it doesn’t come with a guard 🤔

• 
  @bettertogetheradventures2182 ай бұрын

  No, that is one thing that you have to purchase separately

• 
  @Richard-dh8ny2 ай бұрын

  Great job on the initial oil change. I'm curious to know how the engine guard/sliders are working out. Any accidental tip over tests? Strongly considering your model, however there's a set of lower guards made by R-Gaza that also offer good protection for the NC750

• 
  @bettertogetheradventures2182 ай бұрын

  Thank you! Luckily, we haven't had to the guard out. I will say, I find the pegs too short to use as highway pegs.

• 
  @ShannonValk-xs8jf3 ай бұрын

  Can you please show me how to put the stuff on the accu I know one is on the + and the other on the - but where does the relay go

• 
  @eddybedder28653 ай бұрын

  Thanks for the video! I am downsizing because of age from 800lb BMW to a more practical size bike the NC750x dct is one I am considering. The only issue is the leg/foot rest so when i saw your install of the engine protection bars I was thrilled.

• 
  @veliksami3 ай бұрын

  How do you change the DCT (transmission) fluid? I didn't see you adding any fluid for that after you let some out when you replaced the DCT filter. 🧐

• 
  @TheDistantEnd2 ай бұрын

  The DCT and engine share oil, there's just a secondary filter for the clutches. That little bit of oil you see dribbling out is just a little bit more leftover from when it was drained.

• 
  @ShedOfDreams4 ай бұрын

  Make sure to mark the Top of the small oil filter cap. It’s easy to put it on the wrong way. And careful when tightening bolts!!!!

• 
  @dimosthenismagos79824 ай бұрын

  This bike if you want the dipstic to show up to the full mark despite the manual it takes about 3.6-3.7 litters.

• 
  @adolfgerhardhermann59524 ай бұрын

  Not replacing the o-ring AND pinching it while replacing the transmission oil filter? Transmission oil level OK (you lost some)? Go check the blinker fluid quickly! Btw.: the good people invented the torque wrench some years ago, you know...

• 
  @FacetiousUsername25 күн бұрын

  The motor and transmission share oil

• 
  @reprintranch4 ай бұрын

  Thanks for posting this chapter of your adventures. I'm a big fan of Wally Wood and his artwork and have traveled to Menahga several times, so I was thrilled to see how y'all captured the look of the countryside. It's a beautiful place and I encourage other folks to visit if they're passing through West Central Minnesota. Also, I was sorry to see how much the "tar snakes" showed up on some sections of road. I don't ride but I can see how irregularly-shaped bumps all over the road would be problematic when you're on two wheels. Best wishes for a great year!

• 
  @rajdme20054 ай бұрын

  May i know the size of big bolt. I am going order the wrench set. So need size.

• 
  @wynnslothower48926 ай бұрын

  maybe they used a toilet seal for the filter. Lol

• 
  @ianroberts71956 ай бұрын

  Great informative video, got my brand new nc750x delivered on Saturday, just waiting for road salt to go away, this is my fourth nc, so it says how much i love them

• 
  @1zanglang7 ай бұрын

  Can you please, confirm that there are 12 volts powering the charger? Thanks.

• 
  @aboveaverageoutdoors7 ай бұрын

  Look at this ice crack that’s froze…🤦🏽‍♂️😂

• 
  @li90278 ай бұрын

  Опасный дед, зачем он туда полез? Остановите его

• 
  @nikos-giorgos10 ай бұрын

  Or, just buy a dedicated oil filter tool...

• 
  @user-yj5wq4yv5u10 ай бұрын

  Oil change its every 12,000 after do t wadte money after 2nd change

• 
  @li90278 ай бұрын

  Масло не меняю совсем, это же Хонда!😊 Берегите деньги

• 
  @SBKPete10 ай бұрын

  I recently gave my 23 NC750X DCT its first oil & clutch filter change; and I was utterly shocked at how tight the oil filter had been put on, from the factory. Ridiculous 🤦🏻 The O ring seal, must have been squashed flat.

• 
  @alexthebear11 ай бұрын

  Well done! Nice!

• 
  @michaelscott977311 ай бұрын

  Ive fitted this GS-100A just by cutting inline with the bikes wiring cant see why you needed the adapter- rear light flashes for about 6 times then goes back into solid mode.

• 
  @bettertogetheradventures21811 ай бұрын

  Glad that way worked for you

• 
  @michaelscott977311 ай бұрын

  Can you please tell me want make of crash bars you have please?

• 
  @bettertogetheradventures21811 ай бұрын

  There is no specific make. We got these off eBay from a seller from Turkey

• 
  @pg41226 Жыл бұрын

  Good lesson for me last week: I’ve discovered that the dealership has overfilled the sump with almost 1 liter! It proves again that i have to do the oil changes myself 🤷🏻‍♂️

• 
  @bettertogetheradventures218 Жыл бұрын

  Just because someone works at the dealership doesn't mean they know what they're doing 🙂

• 
  @Johnrider1234 Жыл бұрын

  2023 nc 750 x. Ontario canada 🇨🇦. I hate hate hate the seat.

• 
  @bettertogetheradventures218 Жыл бұрын

  Do you have an idea of a replacement?

• 
  @jefffilz7165 Жыл бұрын

  Nice amethyst!!!!! Someday I hope to get back up there again. Thanks for sharing your trip..............Jeff 👍

• 
  @bettertogetheradventures218 Жыл бұрын

  We would love to take you guys along!

• 
  @michaeldlp2698 Жыл бұрын

  What’s the part number and where did you get it?

• 
  @bettertogetheradventures218 Жыл бұрын

  It's a Honda part we got from Honda. I believe it is 08E73-MKW-D00

• 
  @Johnrider1234 Жыл бұрын

  Come to manitoulin this year. We can ride.

• 
  @bettertogetheradventures218 Жыл бұрын

  That would be a nice trek

• 
  @Johnrider1234 Жыл бұрын

  We just bought a 2023 nc 750 x

• 
  @bettertogetheradventures218 Жыл бұрын

  How are you liking her so far?

• 
  @SethJayson Жыл бұрын

  Wait northern Mn? Picking up my 750xDCT in a week and bringing it up to the cabin outside Gilbert.

• 
  @bettertogetheradventures218 Жыл бұрын

  NICE! That is a beautiful area up there. We will be riding and doing the loop through the Superior National forest at the end of July

• 
  @johnstump6255 Жыл бұрын

  Definitely. Wife and I had great trip and found many great crystals. Also memories of new friends.

• 
  @bettertogetheradventures218 Жыл бұрын

  We are itching to go again!

• 
  @M1kloFFi Жыл бұрын

  Where did you buy this crash bars?

• 
  @bettertogetheradventures218 Жыл бұрын

  EBAY

• 
  @M1kloFFi Жыл бұрын

  @@bettertogetheradventures218 could you please share the link?

• 
  @bettertogetheradventures218 Жыл бұрын

  @@M1kloFFi Let me see if I can find it 😊

• 
  @bettertogetheradventures218 Жыл бұрын

  @@M1kloFFi The seller was Inpreda on EBAY but it says they are sold out and they give a list of other sellers

• 
  @wokeupandsmellthecoffee214 Жыл бұрын

  Why didn’t Honda just install a cheap usb-c , Shame on them .

• 
  @bettertogetheradventures218 Жыл бұрын

  We have often wondered the same

• 
  @SethJayson Жыл бұрын

  I was hoping this was the one that showed just reaching through the porthole and pushing the connector up from below. A comment on that other video claimed you can do that and be done with this in 5 minutes. I'm wondering if there's another connector to the switched power further up under the bars, or is there a pggyback connector / method to split the switched power from this point so another lead could be routed up to a GPS or heated grips? Guess you could just cut the USB connector wires and splice in an SAE lead and ziptie it further up for later use.

• 
  @bettertogetheradventures218 Жыл бұрын

  We tried connecting without removing the fairing and were unable to do it. I think the plug is in a weird spot. Quite honestly, we were not 100% sure which plug it was, and it was difficult to see under there with the fairing on. As far as a splitter for running power to a GPS, check out our video on adding the tail light modulator. That company we bought the splitter from may make one, and if they don't their customer service is excellent and if you give them the information they need they will build you one!

• 
  @gordonjenkins8171 Жыл бұрын

  Great helpful video thanks

• 
  @bettertogetheradventures218 Жыл бұрын

  THANK YOU!

• 
  @ArkansasBikernet Жыл бұрын

  So what were the measurements of your base. Are those 2x10's or 2x12's? Also the length of the sides and the also the length of the inside end boards (front and back). Short video, wished it were longer, but nonetheless...very helpful! Thank you.

• 
  @alexanderkiselev5873 Жыл бұрын

  Thanks for this video. here I was able to get a good look at the defense of this brand. Have you tried to fill up or lay down the motorcycle? How does this protection work?

• 
  @bettertogetheradventures218 Жыл бұрын

  I can say with pride, I have not dropped her so I can't speak for how the protection is. They are very sturdy and I have faith that they would do fine.

• 
  @valentinszabo4331 Жыл бұрын

  nice job indeed. I also would like to know about the oil filter . Bought HF 204 - the same type siutable for NC 700 / Nc 750 engine ... about to chane oil soon by myself as well

• 
  @li90278 ай бұрын

  Фильтр масляный только оригинал или mann

• 
  @valentinszabo43318 ай бұрын

  @@li9027 It worked just fine - HF - Had a Mann - and no difference - cheers

• 
  @andrewoxner2941 Жыл бұрын

  Whats the mod for?

• 
  @bettertogetheradventures218 Жыл бұрын

  That was for the taillight modulator

• 
  @WintJames Жыл бұрын

  Nice job! How does it hold up in the wind?

• 
  @bettertogetheradventures218 Жыл бұрын

  So far so good. We had 20-30 mph gusts last week and it did fine

• 
  @bettertogetheradventures218 Жыл бұрын

  The boards 2x12

• 
  @IkeBrider Жыл бұрын

  Mine was fitted by the main dealer on purchase in 2021. Less than two years later I had to take it off as it was seized due to the lack of grease on assembly. It was badly rusted due to Honda's minimalistic paint job. In the end I decided to leave the heavy lump off and use a paddock stand.

• 
  @bettertogetheradventures218 Жыл бұрын

  Sorry that happened! We will definitely have to keep an eye on it.

• 
  @1zanglang11 ай бұрын

  Well, it sounds like the classic story of the owner who gives shit about maintenance...

• 
  @silvernblue911 Жыл бұрын

  Then fuckin help him

• 
  @alejandrobarranco9582 Жыл бұрын

  That's awesome looks like alot of fun

• 
  @bettertogetheradventures218 Жыл бұрын

  THANK YOU!