hello brother first nice work congratulations and if I had the measurements of the project? thanks
@ivantimana19865 күн бұрын
La tengo en el 2024. La recibí por un pago y me parece súper buena
@betelgeze15 күн бұрын
Gratulacje! Sam też lubię naprawiać mojego 300M, planuje zakup Maverika, czy silnik 2.3 jest ok.?
@diytech20014 күн бұрын
@@betelgeze1 The 2.3 engine is ok, it is not an impresive engine but it does the job well. Be sure to check the oil level, especially if you use high revs. I did about 35000 km with the car and did not have any issues with the engine. Fuel consumption is about 8.5 to 10l/100km.
@BicuPaulАй бұрын
Salut!
@user-bs5zp7mg8rАй бұрын
what material did you use as the build frame?
@diytech2001Ай бұрын
Hobby plastic .... it is a bit soft and spongy.
@NoAutotuneBiharАй бұрын
I want to make a tv box out of my samsung f62 smartphone Please help
@Richter13Ай бұрын
I love it
@pierrecastanets19742 ай бұрын
Beautiful! Did you do any camping?
@diytech20012 ай бұрын
Not this time, it was a one day trip. I did go camping several times but i did not record videos. I only have a short on my channel eith my trip to Transalpina Kings Road. Hopefully this year i will get to do more camping.
@AndrianToderici-mc2tz2 ай бұрын
Am 2.3 benzina 2005 multumit👍❤️
@AndrianToderici-mc2tz2 ай бұрын
Am una 2.3 benzina 2005 ii super masinuta is satisfacut de ea!!
@diytech20012 ай бұрын
Da, intr-adevar e o masina buna si e destul de simplu de intretinut.
@user-wl2tf1kb1x3 ай бұрын
❤❤❤❤🎉🎉🎉хороший авто Я на своем на много жоще ездию...по полям.лесам.болотам ..все хорошо но двигатель 2.0 слабоват в крутые подьемы слабо ьянет
@vojtas0093 ай бұрын
Great video! Would love to see more!
@user-gu1iy5du3x3 ай бұрын
How did you deal with the voltage problem (Pi needs 5V while the LCD needs 12V)?
@diytech20013 ай бұрын
In the video I have step up and step down dc-dc converters installed. Now i also have batteries installed and i run them with a 3S charging board which outputs 12v then i have step down converter for rpi. I also have a step down for charging (charger gives 19.5v) and it converts it to 12v for 3S board.
@dwainchambers63634 ай бұрын
"promo sm" 😒
@user-ii1fe9nk7g4 ай бұрын
Нужен редуктор LSD
@mbk12517 ай бұрын
Thanks
@mbk12517 ай бұрын
Hi thought I was the only one person holding to old tech so far I'm happy with this machine & I'm still learning how to use it it been two yr now only thing is change is USB mini to USB C if possible. But getting into the device there the risk of cracking keyboard catch-22 that for very informative video I'm only sadden even with lenovo thinkpad x1 fold it didn't have to pen on paper feature for notes & drawing of this earlier advanced machine implementation brought forward onto current models
@ibrahimabukhater7527 ай бұрын
Hello does the pen works with the replacement keyboard?
@diytech20017 ай бұрын
Hi, yes, it works just as the original.
@dimuborgir19877 ай бұрын
i have brocken screen and body honor x9a would be good to reuse it
@ASNPetani9 ай бұрын
WOW Amazing finally I found this video. Can you explain the brand of the inverter display used and how to connect HDMI to the tablet? Thank you
@ajdood Жыл бұрын
Thanks for a simple and clear instruction. I will replace my cracked keypad screen.
@Zer-je7nq Жыл бұрын
Are you sure keeping the battery is safe ?
@diytech2001 Жыл бұрын
It is running for 3 years now... no issues so far. I checked it from time to time.
@nsicDoria Жыл бұрын
what launcher are you using ?
@diytech2001 Жыл бұрын
I believe iti is called ATV Launcher
@ioannisnatsinas9433 Жыл бұрын
I have the exact same crack as yours and I was wandering/worrying if it is the battery that has swollen up. Did you drop yours, or what happened?
@diytech2001 Жыл бұрын
I dropped it... my battery has not yet swolen...but i am expecting that to happen. I try to not to deplete my battery and when i don't use it, i shut it down and then hold the power button for 10 sec to completly shut it down...otherwise it drains mai battery and it heats up (i have done all bios upgrades and stuff but still drains the battery). But this habbit has kept the battery going well so far.. I still get arround 4-6 hours on battery.
@TyRone1321 Жыл бұрын
I’m building a steam deck laptop and was looking for a hinge design the laptop hinges are a smart idea I’m going to find some and use them
@yoda509 Жыл бұрын
What is name of "monitor"?
@diytech2001 Жыл бұрын
This is the name on aliexpress: 13.3 inch display capacitive touch module kit 1920x1080 IPS 2mini HDMI LCD Module Car Raspberry Pi 3 Game PS3 XBox PS4 Monitor
@admahecha Жыл бұрын
Turn the heat gun off please
@HokutoLegend Жыл бұрын
Hi man,i’m italian, I followed your video, I bought the original keyboard but I have a problem that it seems you had too, the backlight does not work ... at minute 8:52 when you turn on the pc also your keyboard does not light up, then there is a I cut in the video and at minute 8:55 you suddenly see the keyboard lit up, how did you do it? can you help me on how did you get the backlight to work? thanks a lot and sorry for my english😢
@diytech2001 Жыл бұрын
I had no issue with my keyboard. The video cut was just because i switched position of the camera. Maybe you should double check the cable. It may not be fully inserted. Hope you can find the issue.
@kaorischannel Жыл бұрын
metoo， I bought a new one try to install but it doesn't work. I'm in despair. If u have any solution please share it with me.
@kaorischannel Жыл бұрын
my keyboard 's backlight also doesn't work. it just flash a second. I've tried all drivers and make no difference
@HokutoLegend Жыл бұрын
@@kaorischannel also my keyboard lights up for a second on startup and then nothing, i reinstalled all the drivers, i reset windows 10 to factory settings, i bought two original keyboards from two different lenovo resellers because i thought the first one was defective, instead both have the same problem, we worked in a repair shop, so we are not "simple" users and we have tried them all and I can't understand where the problem is 😓😓
@kaorischannel Жыл бұрын
@@HokutoLegend hi dude，I solved half the problem. the resolution is putting the clip on the connector down (to the left).Then your wacom device is usable and keyboard will light up. But my keyboard still can't use. I'm sad. I'm doubt myself.
@Stefan.Stefanov Жыл бұрын
Using an old tablet with an HDMI port is easy to do it. But if you have no HDMI output is a lot more complicated!!!
@oleezone992 жыл бұрын
Thnaks for Your videos :)
@farhaadvelji14612 жыл бұрын
I would appreciate any help as I'm loosing my mind right now
@farhaadvelji14612 жыл бұрын
Hi. I have cracked the top screen. Would it be possible to replace it as well ?
@diytech20012 жыл бұрын
Hi, i have not replaced my screen yet. I found replacement screen on Aliexpress. You should be able to replace the screen in a similar way as the keyboard. Be very careful when inserting spudger not to touch any cables and you should be ok. Here is a link of the display i found. Hope it helps. US $50.21 | For Lenovo Yoga Book YB1-X90 YB1-X90F YB1-X90L LCD Display Digitizer Touch Screen Glass Panel Assembly For YogaBook LCD
@ernestowright40572 жыл бұрын
Se puede cambiar el disco duro por uno de mayor capacidad?
@diytech20012 жыл бұрын
Maybe it could be replaced but it is quite difficult since the emmc module is soldered to the motherboard. It may also have proprietary setup.
@abhisekbiswas61492 жыл бұрын
Please make this video in detail and with voice over.....i wanna make one....so that would be helpful
@buster63792 жыл бұрын
ƤＲＯ𝓂Ｏ𝕤ᗰ 🌷
@abbyaspe1592 жыл бұрын
Can you teach us how to repair the LCD screen? mine is gray or has signal lines 😔
@diytech20012 жыл бұрын
I have not dissasembled my screen yet (and hopefully i won't have to :D). I've done a quick search on youtube and there are a few videos about how to remove the screen. Maybe you can find the solution there. Good luck! ;)
@shanesdiy2 жыл бұрын
Very cool. Nice work.
@tutorials878187812 жыл бұрын
stunning!!
@jonaquiroz49732 жыл бұрын
Donde lo compraste
@diytech20012 жыл бұрын
I bought it from Aliexpress. Please check the comment section for more details.
@espero_dev2 жыл бұрын
Nice man I’m making a laptop from a brief case 2 latte pandas and 2 displays for the briefcases
@diytech20012 жыл бұрын
Nice! Should be a lot powerfull than my RPi laptop
@revlianatmaja2 жыл бұрын
it’s amazing !! what brand of hinges are you using?
@diytech20012 жыл бұрын
Thank you. I got those hinges from an old Dell Latitude D530. ( the one i disassembled in the All in one PC video).
@snorki53032 жыл бұрын
ciao complimenti per il progetto lo volevo fare anche io si potrebbe avere le misure 😁😁😁😁😁😁
@diytech20012 жыл бұрын
Hi, I do not have the measurements for it. This project is still ongoing and what you can see in this video is not the final product. I have done many changes to it. Hopefully I will finish it soon and post a video about it. Sadly I just did not have the time to record every step but I am making a 3D model of it and I will post a link for the model as soon as it is finished.
@techaddict55202 жыл бұрын
You should surely deserve a sub from me
@midorisellers7072 жыл бұрын
Can you tell me what temperature I should set my heat gun on? Also, is the layout the same for the Android and Windows versions?
@diytech20012 жыл бұрын
The layout is different. You should buy the appropriate model for your specific model. The heatgun should be set to max 200 degrees Celcius and slowly heat it up. A hairdryer should also be good. The most important thing is to heat it evenly arround the edges and be carefull not to insert the tool more than 5 mm. There are very sensible wires arround the edge.
@ianpollard41389 ай бұрын
I put mine on the hot bed of my 3d printer. 70 degrees C for 10 minutes works fine.
@suryacta2 жыл бұрын
Where can i buy this..?
@diytech20012 жыл бұрын
i bought it on Aliexpress. Please check the other comments for details.
@Random_44002 жыл бұрын
Mini aiwa
@NikhatKhan-dm5pj2 жыл бұрын
How much did it cost to change the keyboard
@diytech20012 жыл бұрын
It was about 50$
@faust199782 жыл бұрын
Is there any difference in keyboard, between Android or windows version?
@diytech20012 жыл бұрын
yes, the windows version has marked touchpad buttons and the android one has only touchpad. I don't know if they are compatible with each other
@elcuteone2 жыл бұрын
no they're not comparable
@MrAnhell2 жыл бұрын
Nice work!
@GodSaveTheUnitedStates2 жыл бұрын
I like that design. It's retro and at first glance looks just like an older Mac from the 90s. That Linux distro matches it perfectly. Great Job!
Пікірлер
hello brother first nice work congratulations and if I had the measurements of the project? thanks
La tengo en el 2024. La recibí por un pago y me parece súper buena
Gratulacje! Sam też lubię naprawiać mojego 300M, planuje zakup Maverika, czy silnik 2.3 jest ok.?
@@betelgeze1 The 2.3 engine is ok, it is not an impresive engine but it does the job well. Be sure to check the oil level, especially if you use high revs. I did about 35000 km with the car and did not have any issues with the engine. Fuel consumption is about 8.5 to 10l/100km.
Salut!
what material did you use as the build frame?
Hobby plastic .... it is a bit soft and spongy.
I want to make a tv box out of my samsung f62 smartphone Please help
I love it
Beautiful! Did you do any camping?
Not this time, it was a one day trip. I did go camping several times but i did not record videos. I only have a short on my channel eith my trip to Transalpina Kings Road. Hopefully this year i will get to do more camping.
Am 2.3 benzina 2005 multumit👍❤️
Am una 2.3 benzina 2005 ii super masinuta is satisfacut de ea!!
Da, intr-adevar e o masina buna si e destul de simplu de intretinut.
❤❤❤❤🎉🎉🎉хороший авто Я на своем на много жоще ездию...по полям.лесам.болотам ..все хорошо но двигатель 2.0 слабоват в крутые подьемы слабо ьянет
Great video! Would love to see more!
How did you deal with the voltage problem (Pi needs 5V while the LCD needs 12V)?
In the video I have step up and step down dc-dc converters installed. Now i also have batteries installed and i run them with a 3S charging board which outputs 12v then i have step down converter for rpi. I also have a step down for charging (charger gives 19.5v) and it converts it to 12v for 3S board.
"promo sm" 😒
Нужен редуктор LSD
Thanks
Hi thought I was the only one person holding to old tech so far I'm happy with this machine & I'm still learning how to use it it been two yr now only thing is change is USB mini to USB C if possible. But getting into the device there the risk of cracking keyboard catch-22 that for very informative video I'm only sadden even with lenovo thinkpad x1 fold it didn't have to pen on paper feature for notes & drawing of this earlier advanced machine implementation brought forward onto current models
Hello does the pen works with the replacement keyboard?
Hi, yes, it works just as the original.
i have brocken screen and body honor x9a would be good to reuse it
WOW Amazing finally I found this video. Can you explain the brand of the inverter display used and how to connect HDMI to the tablet? Thank you
Thanks for a simple and clear instruction. I will replace my cracked keypad screen.
Are you sure keeping the battery is safe ?
It is running for 3 years now... no issues so far. I checked it from time to time.
what launcher are you using ?
I believe iti is called ATV Launcher
I have the exact same crack as yours and I was wandering/worrying if it is the battery that has swollen up. Did you drop yours, or what happened?
I dropped it... my battery has not yet swolen...but i am expecting that to happen. I try to not to deplete my battery and when i don't use it, i shut it down and then hold the power button for 10 sec to completly shut it down...otherwise it drains mai battery and it heats up (i have done all bios upgrades and stuff but still drains the battery). But this habbit has kept the battery going well so far.. I still get arround 4-6 hours on battery.
I’m building a steam deck laptop and was looking for a hinge design the laptop hinges are a smart idea I’m going to find some and use them
What is name of "monitor"?
This is the name on aliexpress: 13.3 inch display capacitive touch module kit 1920x1080 IPS 2mini HDMI LCD Module Car Raspberry Pi 3 Game PS3 XBox PS4 Monitor
Turn the heat gun off please
Hi man,i’m italian, I followed your video, I bought the original keyboard but I have a problem that it seems you had too, the backlight does not work ... at minute 8:52 when you turn on the pc also your keyboard does not light up, then there is a I cut in the video and at minute 8:55 you suddenly see the keyboard lit up, how did you do it? can you help me on how did you get the backlight to work? thanks a lot and sorry for my english😢
I had no issue with my keyboard. The video cut was just because i switched position of the camera. Maybe you should double check the cable. It may not be fully inserted. Hope you can find the issue.
metoo， I bought a new one try to install but it doesn't work. I'm in despair. If u have any solution please share it with me.
my keyboard 's backlight also doesn't work. it just flash a second. I've tried all drivers and make no difference
@@kaorischannel also my keyboard lights up for a second on startup and then nothing, i reinstalled all the drivers, i reset windows 10 to factory settings, i bought two original keyboards from two different lenovo resellers because i thought the first one was defective, instead both have the same problem, we worked in a repair shop, so we are not "simple" users and we have tried them all and I can't understand where the problem is 😓😓
@@HokutoLegend hi dude，I solved half the problem. the resolution is putting the clip on the connector down (to the left).Then your wacom device is usable and keyboard will light up. But my keyboard still can't use. I'm sad. I'm doubt myself.
Using an old tablet with an HDMI port is easy to do it. But if you have no HDMI output is a lot more complicated!!!
Thnaks for Your videos :)
I would appreciate any help as I'm loosing my mind right now
Hi. I have cracked the top screen. Would it be possible to replace it as well ?
Hi, i have not replaced my screen yet. I found replacement screen on Aliexpress. You should be able to replace the screen in a similar way as the keyboard. Be very careful when inserting spudger not to touch any cables and you should be ok. Here is a link of the display i found. Hope it helps. US $50.21 | For Lenovo Yoga Book YB1-X90 YB1-X90F YB1-X90L LCD Display Digitizer Touch Screen Glass Panel Assembly For YogaBook LCD
Se puede cambiar el disco duro por uno de mayor capacidad?
Maybe it could be replaced but it is quite difficult since the emmc module is soldered to the motherboard. It may also have proprietary setup.
Please make this video in detail and with voice over.....i wanna make one....so that would be helpful
ƤＲＯ𝓂Ｏ𝕤ᗰ 🌷
Can you teach us how to repair the LCD screen? mine is gray or has signal lines 😔
I have not dissasembled my screen yet (and hopefully i won't have to :D). I've done a quick search on youtube and there are a few videos about how to remove the screen. Maybe you can find the solution there. Good luck! ;)
Very cool. Nice work.
stunning!!
Donde lo compraste
I bought it from Aliexpress. Please check the comment section for more details.
Nice man I’m making a laptop from a brief case 2 latte pandas and 2 displays for the briefcases
Nice! Should be a lot powerfull than my RPi laptop
it’s amazing !! what brand of hinges are you using?
Thank you. I got those hinges from an old Dell Latitude D530. ( the one i disassembled in the All in one PC video).
ciao complimenti per il progetto lo volevo fare anche io si potrebbe avere le misure 😁😁😁😁😁😁
Hi, I do not have the measurements for it. This project is still ongoing and what you can see in this video is not the final product. I have done many changes to it. Hopefully I will finish it soon and post a video about it. Sadly I just did not have the time to record every step but I am making a 3D model of it and I will post a link for the model as soon as it is finished.
You should surely deserve a sub from me
Can you tell me what temperature I should set my heat gun on? Also, is the layout the same for the Android and Windows versions?
The layout is different. You should buy the appropriate model for your specific model. The heatgun should be set to max 200 degrees Celcius and slowly heat it up. A hairdryer should also be good. The most important thing is to heat it evenly arround the edges and be carefull not to insert the tool more than 5 mm. There are very sensible wires arround the edge.
I put mine on the hot bed of my 3d printer. 70 degrees C for 10 minutes works fine.
Where can i buy this..?
i bought it on Aliexpress. Please check the other comments for details.
Mini aiwa
How much did it cost to change the keyboard
It was about 50$
Is there any difference in keyboard, between Android or windows version?
yes, the windows version has marked touchpad buttons and the android one has only touchpad. I don't know if they are compatible with each other
no they're not comparable
Nice work!
I like that design. It's retro and at first glance looks just like an older Mac from the 90s. That Linux distro matches it perfectly. Great Job!