I can't measure torque in ounces. My robot said that's 14 kilograms. Why do people measure torque in ounces? Because it masks how low of a KG the servo is. That's like your broadband provider measuring maximum speeds in megabits instead of megabytes, because 8 megabits is only one megabyte, so it sounds more impressive and fools newbies. Please don't list torque in ounces, nobody does that. If your servo is only 14kg but you like it, that's fine. But don't make everyone use a conversion chart just to understand what you're talking about, please. Thank you.
@raident2911 күн бұрын
hey nice vid man! i have an element enduro too but with 12.8 inches wheel base. was thinking of using the cliffhanger body. do you think it would fit? planning to trim the rear part so that the rear wheel will fit.
@archerash669513 күн бұрын
Your rig must be light.. holy shit. Mine like 7.4lbs. Lol
@archerash669513 күн бұрын
I find the Pline duals to soft.. I cant figure out why proline doesnt offer different outter foam stiffnesses and sizes.. I guess they dont want to make money.
@dhcronlineraceclubgrantour4219Ай бұрын
Love the video!
@Jb-tf4tf2 ай бұрын
Wish I could give 5 thumb up 🎉
@GREENBOY47192 ай бұрын
Hi *Read More*
@valleymade95632 ай бұрын
How long did the servo last you ?
@jamiethomas89752 ай бұрын
Whyd you go with a 13 tooth pinion gear?
@brianwinters49912 ай бұрын
Do you have a video showing the flysky gt5 install , I can't get mine to drive the motor .
@BUILTLIGHTWOUNDTIGHT3 ай бұрын
I run the stock tires and foams, and they have taken down 99% of the line's here in Idaho Falls ID. A little lead, goes a long way!!
@BUILTLIGHTWOUNDTIGHT3 ай бұрын
I am geared 22-39 running the Fusion Pro, so its pretty quick for a scale trail rig. But it is a total blast every where I drive it!
@BUILTLIGHTWOUNDTIGHT3 ай бұрын
I run lead in the front wheels, anywhere from 3oz in each. Up to 8oz in each, and for the most part, its just shy of unstoppable. Well for a scale trail truck anyway.
@BUILTLIGHTWOUNDTIGHT3 ай бұрын
Performance first and foremost for me, and the sport is a total blast!
@BackroadCrawlersRC3 ай бұрын
Sick set up! Love the beadlocks!
@Usnveteranstacker4 ай бұрын
I love the slow meticulous footage.
@NexusEradication5 ай бұрын
Fuck this, i want a full size truck like that
@rcarty4195 ай бұрын
Nice
@rcarty4195 ай бұрын
Very nice dude
@rcarty4195 ай бұрын
Nice
@user-hf8yl1wy8g5 ай бұрын
Beautiful!!
@jayprevett66576 ай бұрын
Can you leave a link for the treal parts
@johnday48838 ай бұрын
Love my trx4 sport❤😊
@Alexauscelle8 ай бұрын
Whats going on under the Body?
@gypsydanger53458 ай бұрын
where did you get body from ?
@heric.44288 ай бұрын
Great build mate,what wheels you have exactly for those Baja tires?
@AVERAGEJOERC9 ай бұрын
I have these wheels but the stock nut wont go deep enough.. is there an adapter out there or just buy 8mm unflanged nuts
@Daniyoyo11 ай бұрын
Do the sport come with a battery ? If not do they take the nimh battery that came with my slash ?
@donmurchison2558 Жыл бұрын
Cool video. I love my Capra 4ws
@tundrasr5709 Жыл бұрын
What body is that?
@slottygw2wvw842 Жыл бұрын
Why did you have to cut for the shocks to pass through? isn't there a way to avoid this?
@vbspeed7571 Жыл бұрын
I finally got some time 2 install it..on one of my bigger. Rigs...I put one in the trx4m when they 1st cam out. It's a killer system
@Friskee62 Жыл бұрын
The foams. Cut them, don't buy new ones. Cut them in an 8 pointed star shape...
@SMCracing Жыл бұрын
@3bros rc G13pro 100$ 800oz on 3s. And awesome customer service. Tom Asher runs a tight ship over at 3bros.
@Boogie_the_cat4 күн бұрын
The "S" rating of the battery does not alter the torque power or speed of a servo. The only thing that will give more or less power to a servo is the BEC of your receiver, which will be either 6v, 6.8v, 7.4v, or 8.4v 3s would be 11.2 volts, which no servo runs at. The "S" rating does not affect your BEC, which is the only way to change the voltage your servo receives. So, "800oz on 3s" does not help anyone, because your vehicle may have a high BEC of 8.4v, and someone else using the servo at 6v would get a significantly lower torque than you. Please if you want to recommend things to people, learn what actually controls the servo voltage and strength, because it's not the "S" rating of your lipo. Thank you. Maybe join a forum for better understanding of the servo voltage, BEC setting of receiver, etc...
@jaycevessier7554 Жыл бұрын
Doesn’t look like you run any weight? I’ve learned the sport loves forward weight. Completely transforms how the truck crawls
@kevingoodrich3050 Жыл бұрын
What spur and pinion are you running in the 3 gear trans?
@aloismatejka6191 Жыл бұрын
Hi there from Czech Republic. Nice video with commentary. I also happen to be thinking about a TRX4 Sport with a Knightrunner body. I plan to use the super body parts from Club5 Racing. What kind of bumpers do you have please? Thanks a lot.
@eckos2310 Жыл бұрын
Do you have a video showing on how you build this with this body?
@dirtrider88 Жыл бұрын
what about shock and link positions?
@daneflorio3338 Жыл бұрын
Hey nice video. What bumper is that you have installed? Looks like it fits nicer than the stock
@lukerecore Жыл бұрын
I'm buying this exact servo for my kraton v2 4s. And it looks like it will have plenty of power for my driving style. I'm just a basher but I don't like the s652 servos that comes with the kraton.
@ThatCrazyRCGuy67 Жыл бұрын
I got one of the 35kg amazon special ones...its a bit better then stock, and a different servo saver... The Kraton 4s v2 has terrible steering....
@DB-qm4jx Жыл бұрын
Also, I think you should get to Phoenix
@DB-qm4jx Жыл бұрын
I don’t have any experience with anything other than RTR tires. I literally just got in the mail though my Mickey Thompson, Baja X tires for my Capra and G8 compound. I was wondering if I should be regretting that and get predator. Let me ask you how come you prefer G8 over predator?
Пікірлер
I can't measure torque in ounces. My robot said that's 14 kilograms. Why do people measure torque in ounces? Because it masks how low of a KG the servo is. That's like your broadband provider measuring maximum speeds in megabits instead of megabytes, because 8 megabits is only one megabyte, so it sounds more impressive and fools newbies. Please don't list torque in ounces, nobody does that. If your servo is only 14kg but you like it, that's fine. But don't make everyone use a conversion chart just to understand what you're talking about, please. Thank you.
hey nice vid man! i have an element enduro too but with 12.8 inches wheel base. was thinking of using the cliffhanger body. do you think it would fit? planning to trim the rear part so that the rear wheel will fit.
Your rig must be light.. holy shit. Mine like 7.4lbs. Lol
I find the Pline duals to soft.. I cant figure out why proline doesnt offer different outter foam stiffnesses and sizes.. I guess they dont want to make money.
Love the video!
Wish I could give 5 thumb up 🎉
Hi *Read More*
How long did the servo last you ?
Whyd you go with a 13 tooth pinion gear?
Do you have a video showing the flysky gt5 install , I can't get mine to drive the motor .
I run the stock tires and foams, and they have taken down 99% of the line's here in Idaho Falls ID. A little lead, goes a long way!!
I am geared 22-39 running the Fusion Pro, so its pretty quick for a scale trail rig. But it is a total blast every where I drive it!
I run lead in the front wheels, anywhere from 3oz in each. Up to 8oz in each, and for the most part, its just shy of unstoppable. Well for a scale trail truck anyway.
Performance first and foremost for me, and the sport is a total blast!
Sick set up! Love the beadlocks!
I love the slow meticulous footage.
Fuck this, i want a full size truck like that
Nice
Very nice dude
Nice
Beautiful!!
Can you leave a link for the treal parts
Love my trx4 sport❤😊
Whats going on under the Body?
where did you get body from ?
Great build mate,what wheels you have exactly for those Baja tires?
I have these wheels but the stock nut wont go deep enough.. is there an adapter out there or just buy 8mm unflanged nuts
Do the sport come with a battery ? If not do they take the nimh battery that came with my slash ?
Cool video. I love my Capra 4ws
What body is that?
Why did you have to cut for the shocks to pass through? isn't there a way to avoid this?
I finally got some time 2 install it..on one of my bigger. Rigs...I put one in the trx4m when they 1st cam out. It's a killer system
The foams. Cut them, don't buy new ones. Cut them in an 8 pointed star shape...
@3bros rc G13pro 100$ 800oz on 3s. And awesome customer service. Tom Asher runs a tight ship over at 3bros.
The "S" rating of the battery does not alter the torque power or speed of a servo. The only thing that will give more or less power to a servo is the BEC of your receiver, which will be either 6v, 6.8v, 7.4v, or 8.4v 3s would be 11.2 volts, which no servo runs at. The "S" rating does not affect your BEC, which is the only way to change the voltage your servo receives. So, "800oz on 3s" does not help anyone, because your vehicle may have a high BEC of 8.4v, and someone else using the servo at 6v would get a significantly lower torque than you. Please if you want to recommend things to people, learn what actually controls the servo voltage and strength, because it's not the "S" rating of your lipo. Thank you. Maybe join a forum for better understanding of the servo voltage, BEC setting of receiver, etc...
Doesn’t look like you run any weight? I’ve learned the sport loves forward weight. Completely transforms how the truck crawls
What spur and pinion are you running in the 3 gear trans?
Hi there from Czech Republic. Nice video with commentary. I also happen to be thinking about a TRX4 Sport with a Knightrunner body. I plan to use the super body parts from Club5 Racing. What kind of bumpers do you have please? Thanks a lot.
Do you have a video showing on how you build this with this body?
what about shock and link positions?
Hey nice video. What bumper is that you have installed? Looks like it fits nicer than the stock
I'm buying this exact servo for my kraton v2 4s. And it looks like it will have plenty of power for my driving style. I'm just a basher but I don't like the s652 servos that comes with the kraton.
I got one of the 35kg amazon special ones...its a bit better then stock, and a different servo saver... The Kraton 4s v2 has terrible steering....
Also, I think you should get to Phoenix
I don’t have any experience with anything other than RTR tires. I literally just got in the mail though my Mickey Thompson, Baja X tires for my Capra and G8 compound. I was wondering if I should be regretting that and get predator. Let me ask you how come you prefer G8 over predator?
Is, This a remote toy tho??
Nice😂
Sick crawler course bro💯
Gotta love a capra, awesome rig...
hey you guys, its one eyed willy....💎
Gotta love the ruptures bro!!
Awesome rig.