Пікірлер

• 
  @ronnierocha98942 күн бұрын

  that brand of the heating blanket is not cheap either, I just looked it up. WG20 Insulated Band Style Gas Cylinder Warmer - Propane Heater, Fits 20, 30 & 40lb Gas Tanks, Fixed Internal Thermostat Max Temp 90 F $182.98

• 
  @GrenergyTriFuel2 сағат бұрын

  Pre-pandemic you could find them for $100-$120. Prices on these has gone up but they are still a life saver if you absolutely depend on your generator.

• 
  @ronnierocha98942 сағат бұрын

  @@GrenergyTriFuel thanks for the info, I need to get me a one or two. didn't know they make them until I watched your video. this helps a lot !, Oh I just learned that they came out with Automatic Transfer Switch for Portable Generator. This is great news for me also.

• 
  @dsb7132 күн бұрын

  thoughts on 95009? think its worth it? i need something here in houston lol.

• 
  @GrenergyTriFuel2 сағат бұрын

  You mean Predator 9500?

• 
  @cl43672 күн бұрын

  Thanks for the video and all the great info. Weird mine came apart just fine. It seamed like anaerobic sealant. Picked up the same century 039-122 regulator and load block with precimex first stage on sale for 50.00. Works like a charm.

• 
  @GrenergyTriFuel2 сағат бұрын

  Glad it helped

• 
  @VulcanMC6 күн бұрын

  Like you videos. Very informative. I have a Predator 5000 and Duromax 16000ih. Both dual fuel. Have you or plan natural gas conversion for Duromax 16000ih? Really need one and like what you did for Predator 5000. Hope you do one soon. Thanks. JH

• 
  @GrenergyTriFuel2 сағат бұрын

  I plan to build several other kits for other generators. It just depends how much time I have at the shop. At the moment I’m super swamped with work.

• 
  @yxcvmk7 күн бұрын

  From your experience, if one has the choice: Would you suggest using/converting a 2000i, or a 2200 overall?

• 
  @GrenergyTriFuel2 сағат бұрын

  They are both good, you can do either or but the EU2200i has been popular.

• 
  @yxcvmk7 күн бұрын

  How cold can it be, so that the propane still works fine? I assume at some point the evaporator would not work properly anymore, correct?

• 
  @GrenergyTriFuel2 сағат бұрын

  I would say near zero temps would be bad, but you can use a propane blanket heater.

• 
  @yxcvmk7 күн бұрын

  Is it feasible you sell on Amazon trough their shipping system? This would make it quite simple to order internationally if setup properly, or are the fees just too steep for you (and with that the price the customer would need to pay)?

• 
  @GrenergyTriFuel2 сағат бұрын

  The sellers fee would be 1/3 the cost of the product and I would have to sell it on Amazon for a lot more than my website to cover the sellers fee.

• 
  @yxcvmk7 күн бұрын

  In case one would also fir a remote shutoff circuit to the generator: Would this be OK with propane, will the delivery system (with the lack of vacuum) stop propane flow, or is it a must to turn off the propane source all the time? By the way: the kit seems great!

• 
  @GrenergyTriFuel2 сағат бұрын

  For safety it’s better to shut off the propane. For remote start you can add self priming on to the demand regulator to do so. I’ve had customers do this but I don’t sell any of those components, it’s beyond what I do.

• 
  @aziznuhu315110 күн бұрын

  Price

• 
  @GrenergyTriFuel2 сағат бұрын

  $299.99

• 
  @airborneranger-ret10 күн бұрын

  How do you check the fuel level?

• 
  @jonathonchisum60792 күн бұрын

  There is a fuel gauge on the top

• 
  @airborneranger-ret2 күн бұрын

  @@jonathonchisum6079 Thx :)

• 
  @GrenergyTriFuel2 сағат бұрын

  Yes, it has a fuel gauge

• 
  @triphan764310 күн бұрын

  You talking too much

• 
  @GrenergyTriFuel2 сағат бұрын

  And some people say I don’t make it clear enough or talk enough about their specific NG connection. Can’t make everyone happy.

• 
  @rudebox6411 күн бұрын

  Excellent video and instructions! I really like your style and honesty. I'm confident in you and the quality of your tri-fuel conversion kit. Thank you.

• 
  @GrenergyTriFuel2 сағат бұрын

  Thanks so much for your feedback!

• 
  @rudebox6411 күн бұрын

  Where is the tri-fuel system for the Predator 5000? Interested in getting one, Thanks.

• 
  @GrenergyTriFuel2 сағат бұрын

  Please check in the video description for the link.

• 
  @reddragun0911 күн бұрын

  hi, can you put a link for the video to make it 220VAC ?

• 
  @curmudgeinnak12 күн бұрын

  On the gen 2 version of this gen it has a circuit that shuts down the system so you do not drain the battery. It is nice to have that but you have to press the button on the system to wake it up to be able to start it with the remote.

• 
  @GrenergyTriFuel2 сағат бұрын

  Yup, that’s correct

• 
  @curmudgeinnakСағат бұрын

  @@GrenergyTriFuel Hope you can figure out a by pass on this.

• 
  @brianroselli22914 күн бұрын

  Basically every sports atv dirt bike has it now

• 
  @GrenergyTriFuel2 сағат бұрын

  Yes

• 
  @brianroselli22914 күн бұрын

  Home ac with today’s efficiency should run on that 5000 you would have to be careful what you would run fuel injection is more efficient? So … you could just clean the fuel injector

• 
  @GrenergyTriFuel2 сағат бұрын

  If you have a ductless AC system it is possible, but if you have a large AC whole home unit it’s going to be hard without a soft start.

• 
  @ElmoUnk195316 күн бұрын

  Excellent and informative presentation! Thank You Sir!

• 
  @GrenergyTriFuel2 сағат бұрын

  You’re very welcome!

• 
  @shaunvangestel847417 күн бұрын

  Rv

• 
  @GrenergyTriFuel2 сағат бұрын

  Yes it’s popular with RV’ers

• 
  @knowledgeispower619217 күн бұрын

  I would recommend placing the locking gas valve downstream of the main gas shut-off for the property.

• 
  @GrenergyTriFuel2 сағат бұрын

  Yes agreed

• 
  @joelvazquez700818 күн бұрын

  Ok, so what is that pipe or hose sticking out from your muffler and why did you add it and not comment?

• 
  @GrenergyTriFuel2 сағат бұрын

  That’s the exhaust extension, I’ll make those later this year.

• 
  @bigbread900000021 күн бұрын

  where can I buy just a replacement for the original regulator, as the original has failed

• 
  @GrenergyTriFuel2 сағат бұрын

  You would need to call Harbor Freight

• 
  @Pablo-cp9nc21 күн бұрын

  Andy, did you say you recommended a different heat range for LP in a different video? What’s the part number for the iridium plug recommended? Thanks for a great kit. I have two version 2’s to run in parallel during peak times.

• 
  @GrenergyTriFuel2 сағат бұрын

  Sure, for the version 1 the NGK BPR6ES with gap of .024”-.026” is recommended.

• 
  @Pablo-cp9nc21 күн бұрын

  Old version is a Hemi head, newer is not. The go-cart racers actually prefer the non-Hemi head.

• 
  @GrenergyTriFuel2 сағат бұрын

  Nice, thanks for the info

• 
  @coaterdave23 күн бұрын

  Great list and great ideas. Nothing like a problem generator when you loose power. 👍

• 
  @GrenergyTriFuel2 сағат бұрын

  Absolutely!

• 
  @bravespirit187124 күн бұрын

  Anyone know if this is a good job site generator? Like powerful enough to power an air compressor and some corded power tools?

• 
  @GrenergyTriFuel2 сағат бұрын

  I would stick with a non inverter. Air compressors are known to stress out the inverter unit and cause it to prematurely fail. Can’t expect much on a Chinese made generator.

• 
  @cl436725 күн бұрын

  Just ordered 2 generators. FedEx is great at smashing anything they touch. Both generators completely smashed. Drove to harbor freight picked one of these up. Pristine condition. I almost feel like I should drag it behind the truck to get the FedEx love marks on it.

• 
  @GrenergyTriFuel2 сағат бұрын

  Lucky these are sold in stores so you can grab a replacement. There’s tons of people saying their generators got smashed from Amazon as well.

• 
  @craigblankenship49027 күн бұрын

  Great video. I personally would not be running that break-in oil on a generator. You may destroy the engine with that stuff. Just use regular oil and after about 10-15 hrs, Change the oil and you’ll be good to go.

• 
  @GrenergyTriFuel2 сағат бұрын

  I agree, I’ve had some folks tell the they’ve used it but I don’t think it’s needed. Just normal oil for break in is fine.

• 
  @mrpaul397029 күн бұрын

  You mentioned in this video you would make a video to explain how to connect the 30A outlet to a well pump. Will you be making a video to show this process?

• 
  @dj-bn1fjАй бұрын

  I have a B&S generator an after 3 X 25.00 Amazon carburetors which was only good for one or two cycles they crapped out so finally purchased a carburetor from B&S for 119.00 buck then I had a generator that never gave me a problem. Just a note buy OEM parts for the name brand engines not the cheap crap off of Amazon or E-bay.

• 
  @GrenergyTriFuel2 сағат бұрын

  Agreed, same with OEM Honda carbs.

• 
  @basketballjones6782Ай бұрын

  So, what are the generator power ratings running on NG for the 5000 and the 3500?

• 
  @GrenergyTriFuel2 сағат бұрын

  For the Predator 5000 I was only able to get 3000 running and the same for the Predator 3500.

• 
  @Coral-reef.Ай бұрын

  Dam you killed me when you said its chinese.....i was about to buy it but i need reliability since i will be buying it got my grandparents in an emergency. Any suggestions ?

• 
  @GrenergyTriFuelАй бұрын

  There are not many choices out in the market for quality = cheap price. Your going to have to pay money for a Honda / Yamaha generator, or buy a Chinese made unit. You can't have both.

• 
  @Coral-reef.Ай бұрын

  @@GrenergyTriFuel i ended up buying a generac 3500 for $1000.

• 
  @GrenergyTriFuelАй бұрын

  Great, I also have a tri-fuel kit for this generator. Just shoot me an email for more info. [email protected]

• 
  @robgillis472Ай бұрын

  Where can I get that cord?

• 
  @GrenergyTriFuelАй бұрын

  It's custom made, you'll have to build one yourself. There are a lot of DIY videos on KZread.

• 
  @BoogyWoogyCreepАй бұрын

  We have a 3500 we use for power outages in our rural home. It's wired to a box in one bank of the box. We didn't use the microwave but it did keep the lights, internet, fridge, freezer, etc running. When the freezer kicked on, it would draw too much and knock out the power for a split second. Overall, it ran all the essentials for 3 days during a massive snowstorm in 2022. Thinking about upgrading to the 9500. It might be overkill but I'd rather have it than not.

• 
  @GrenergyTriFuelАй бұрын

  Thanks for your feedback!

• 
  @3rdcoastpescaАй бұрын

  this kit is ready?

• 
  @GrenergyTriFuelАй бұрын

  Yes, it is for sale. Please see description for more details.

• 
  @georgegould667Ай бұрын

  Don’t you need a regulator to run on natural gas ?

• 
  @GrenergyTriFuelАй бұрын

  You will need the demand regulator, but not the pressure regulator.

• 
  @lindamishalanie5593Ай бұрын

  You cannot use this for a home.

• 
  @GrenergyTriFuelАй бұрын

  Some people already do.

• 
  @bobstombaugh3393Ай бұрын

  Please buy a tripod and learn to use it instead of doing your inept one handed monkey act. Very irritating.👎🏻

• 
  @Oharsh0928Ай бұрын

  So if I wanted to run a window unit, fridge, deep freezer, some fans, and a few lights could the 5000 do it or would I need to go with the 9500?

• 
  @GrenergyTriFuelАй бұрын

  To know exactly you will need to measure everything with a watt meter and add up your usage.

• 
  @CarlosDelaoGunEngraverАй бұрын

  AWSOME PRODUCT, MY SECOND, ONE FOR MY SMALL HONDA THE OTHER FOR THIS GENERATOR, WORKS! THANKS FOR A GREAT PRODUCT

• 
  @GrenergyTriFuelАй бұрын

  Thanks for your feedback! Glad you like it!

• 
  @alexfinlayson2016Ай бұрын

  Why didn’t you hook it up and show us how it runs ?

• 
  @GrenergyTriFuelАй бұрын

  This is just mainly an install video, I rather not make the video loner than it should be.

• 
  @SillyrefrigeratorАй бұрын

  What kinda time are you getting per tank though??

• 
  @GrenergyTriFuelАй бұрын

  Roughly 15-18 hours at 25% load

• 
  @ObadiahTeleoАй бұрын

  Just set up the system. Straight forward and easy. Great tutorial. Look, I hate buying stuff when it turns out to be either not well made or just plain crap. I bought this system because you said it was made with high quality components. I'm thrilled to confirm every part I received was high quality, stuff I would have picked out myself. Very pleased with this purchase.

• 
  @GrenergyTriFuelАй бұрын

  Glad you love the kit! And thank you for the detailed feedback! Enjoy the kit for many years to come!

• 
  @reyrrzАй бұрын

  Appreciate the information.

• 
  @GrenergyTriFuelАй бұрын

  Glad it was helpful.

• 
  @LukeLookingUpАй бұрын

  If you use the propane instead of fuel will it work at 7000 ft above sea level ok?

• 
  @GrenergyTriFuelАй бұрын

  Yes, there is a fuel adjustment on the regulator assembly to easily adjust for altitude.

• 
  @HurledАй бұрын

  How do you get 240v out of the 5000? I heard you say there was a way to do this.

• 
  @GrenergyTriFuelАй бұрын

  The 240V is only good for single phase appliances which applies to some water pumps but not all. I should edit this video for clarification. Sorry about that.

• 
  @GrayBeardOverlandАй бұрын

  Holy shat! Just explain it once. If a viewer doesn't understand what you're saying, they can replay the video as many times as it takes for the info to make sense. Stay on topic and make additional videos explaining the differences between generator manufacturers and or regulator types. Link the videos and you will get more views. Or change the title of this video stating that it covers much more than Predator NG conversion. Your information is great, just not focussed.

• 
  @GrenergyTriFuelАй бұрын

  Thanks for the productive feedback, rather than belittle the whole video with no explanation. I’m not a professional video maker and it takes me hours to edit and do retakes. I would rather just focus on product building than be on KZread but my customers ask that I make videos for their questions and concerns regardless of how bad my videos come out. It’s just purely education rather than entertainment.

• 
  @muzicfinder1Ай бұрын

  What do you think about the 4500 watt, open frame inverter generator? In the market?

• 
  @GrenergyTriFuelАй бұрын

  They are all made from the same 2-3 Chinese factory, just with different colors and panels. I would buy from a brand that has good customer service. Such as Harbor Freight, Champion and Duromax.

• 
  @Cotton088Ай бұрын

  Most welding machines can be 240v. I have done a lot of stick welding with my other generator

• 
  @GrenergyTriFuelАй бұрын

  Thanks for watching

• 
  @wow1022Ай бұрын

  if you have a dual fuel generator (gas/propane), isn't there already a fitting inside the carb for the propane coming from the propane regulator that you could connect to a Y valve and tie one to the existing propane regulator and the other into the natural gas from a natural gas regulator?

• 
  @GrenergyTriFuelАй бұрын

  Then you would need to drill a hole into the generator for the fuel input going to the carb. Where my kit just plugs into the existing propane input on the front panel of the generator. No cutting, no drilling, no anything. Just plug and play.

• 
  @wow1022Ай бұрын

  ​@@GrenergyTriFuel yeah that would be preferential, but I don't like the regulator sitting on the ground on the side of the generator, so it still would take drilling into the plastic to mount it anyways, i was actually able to successfully convert my Duromax XP9000IH using the method I described, since the generator already has the fitting in the carburetor for propane there was no need to pull the air box off and install a special fitting, I haven't max load tested it yet, but I was able to successfully start and run a 4 ton Ruud unit with a soft starter on it with natural gas, the unit along with other things running in the house at the time was pulling around 4kW