Пікірлер

• 
  @nerdy3552 күн бұрын

  Great video and if I may add; If you disconnect the positive first or alone, the danger is that much of the metal around the battery (body, chassis, engine) is grounded and could be touched.

• 
  @raymonddalgardhansen99094 күн бұрын

  I am struggling to wire a speedometer from china to my zzr1100c 1991. Just cant get the rpm to work. And fuel wont work

• 
  @janhow74296 күн бұрын

  just did it took me same 5 minutes....thank you sir

• 
  @Amooger10 күн бұрын

  Sweet, thanks

• 
  @vanhoang385013 күн бұрын

  👍 TK 👍 Sir great video

• 
  @xpd44.outfitters17 күн бұрын

  Hey man! Did you end up finding a plug for the factory tachometer hole coming out the engine? Cheers

• 
  @itsthetruth813020 күн бұрын

  Thank you so much for making this video!!!! I really appreciate this! Omg so easy!!!

• 
  @alangrant527821 күн бұрын

  Oatstanding video. Thanks. I like the Jim carrey impressions.

• 
  @aquamedic885723 күн бұрын

  Looks easy but a pain in the 🍑

• 
  @Mike_Barker23 күн бұрын

  Especially when you are stuck on the side of the road with a dead Rav!

• 
  @Logistican51825 күн бұрын

  That's disheartening to learn this won't stop a hot wire. People out here prying the hood of my 96 Buick

• 
  @sued500527 күн бұрын

  Thanks!!!

• 
  @tyslink27 күн бұрын

  Just bought this same year/model off of the ole interwebs and trailered it home...pretty good condition for a 50 year old bike, but apparently it doesn't run (haven't even tried starting it yet). Hopefully it's just dirty carbs or something simple, but I am excited to hear it fire up for the first time. These old Hondas are so cool!

• 
  @spartanxxxxАй бұрын

  Worked perfectly for my 2015 RAV4! Never changed a headlight before and this was so easy! Granted, I did the driver side. Gonna hold off on the passenger side for now 😅

• 
  @tonyzitto7730Ай бұрын

  2017 is different guys, just FYI.

• 
  @lonroberts9508Ай бұрын

  Do not do not do not touch the new bulb!wear gloves

• 
  @Mike_BarkerАй бұрын

  Agreed. Touching the glass will shorten the life of the bulb.

• 
  @newares8140Ай бұрын

  Thanks for this. Going to order in your link, my local prices are above $100 for the lightbulb 💡

• 
  @TheIceMan9304Ай бұрын

  Thanks for the video, I have a 2017 and the alternator went bye bye two days ago, sourcing a replacement is almost impossible where I live, there are zero in any scrapyard or used auto parts dealer. Non oem and oem are going to take a week to get here minimum. And then I have to make sure I don't get the 4 pin like you did :(

• 
  @JavssoccerАй бұрын

  Fantastic tutorial 🎉

• 
  @RiseOfPhoenyxАй бұрын

  Definitely saw Eminem the first few seconds of the video haha

• 
  @dalecarpenter8828Ай бұрын

  calibrated knockometer ,that's sort of like and adjustable slammer !

• 
  @dalecarpenter8828Ай бұрын

  in 1984 I bought the 1974 CB 750 k for $500.00 cash ! rode it like I stole it for a few years ! my brother called me the rider in the storm ( 500 mile trips to see my kids when I was laid off in the winter ) ,I would watch the weather (satellite pictures ) wait for a hole in the weather that was moving the way I wanted to go and ride in the hole !

• 
  @callatis0627Ай бұрын

  Great video, very clear and concise. 👋

• 
  @rossp1762Ай бұрын

  Great video good work. Can you tell us and show us how you change the fuel filter? that would be great.

• 
  @redal35Ай бұрын

  Great video, very clear and concise. For anyone having trouble opening the light covers, try turning clockwise after going past the 1/8 counterclockwise mark, it usually gets it to pop out. Also, a strong piece of rope or paracord is really useful for getting additional leverage on the rotating plate, hook it around the main tab and manipulate the direction with rope.

• 
  @shoelessscottАй бұрын

  Thank you!

• 
  @Moon-magic1092 ай бұрын

  We miss you Mike..😢

• 
  @mmbengs2 ай бұрын

  Great video Mike! You saved me from chopping off my terminals👍

• 
  @davidtinoco94682 ай бұрын

  For real!!! I was so close to doing so & I'm like maybe there's a better way

• 
  @jenericjoe75652 ай бұрын

  A tl;dr guide to help those struggling in the future so they dont suffer like I did. How to change the driver side bulb: 0) You will need a small flathead screwdriver for "crowbaring" and any long, durable object; I used a 2nd bigger flathead screwdriver. If your bulb is a HALOGEN bulb like on a RAV4 2013/2014 model then DO NOT touch the bulb at any time or your body oil may cause damage to the bulb by disturbing its heat distribution when turned on; always handle the bulb by its base, 1) We need to move the windshield wiper fluid reservoir (the white hose thing with a black lid) off to the side so we can easily access the bulb cover. The reservoir is attached to the car via a black seal. This can be easily removed by using the small screwdriver BETWEEN the circle and outer ring and "crowbaring" downwards to push the circular part upwards and out. 1.5) I would HIGHLY recommend taking this black seal part OUT of the car until you have finished everything else so that you don't accidentally drop it into the engine area like I did... 2) Disconnect the exterior wire that is attached to the cover, it's fine to leave it hanging, 3) Time to remove the cover. Above the letter "O" on TOP is an arrow. If you crank your head forward enough or look from a different angle you will see along the edge of the cover there is a ball at the 10/11 o'clock position. This is where you need to rotate the triangle to. Do NOT make the mistake of overdoing this part and rotating the cover too far or it will not open. To open: you need to rotate counter-clockwise. Left hand pulls up, right hand uses the long, durable object you prepared to push downwards. Any of the tabs on the edge are fine to use as leverage points. 4) Same as the passenger side bulb change. Disconnect bulb -> replace bulb -> reconnect wire to bulb -> put on cover 5) Reverse the first few steps: replug the exterior cable -> move the reservoir back to its initial position -> put the black seal back in -> job done.

• 
  @yougetagoldstar2 ай бұрын

  You helped me changed the oil in my car... It was you.

• 
  @user-xt7sv2hi2d2 ай бұрын

  This is Excellent Video. Our Car Toyota Rav4 2014 Headlight bud burn out today. Thanks so Much for This Video and BIG Help. May God Jesus always Blessing You. Thank you!

• 
  @paulgeek2 ай бұрын

  For some reason, I cannot find a video showing HOW to remove the battery. It appears nothing is holding it in or that it has any attachment point on the new one. I can't seem to lift mine out. Obviously, I have disconnected all cables. Any help would be greatly appreciated. Thanks

• 
  @Mike_Barker2 ай бұрын

  It should just pull straight up and out.

• 
  @paulgeek2 ай бұрын

  @@Mike_BarkerMike thank you for the quick response, by the way, I did enjoy your video. That does confirm what I thought. Thank you Mine is a 76 all original in excellent shape. I found it 10 years ago stored in a warehouse for 22 years. As with most of us, it was the dream bike from high school. I am glad I learned Canadian years ago.......

• 
  @mohdibrahim13502 ай бұрын

  Thanks sir How is doing now. I could hear the cold start rattle which I have on my 17 rav4, is there any issue with that?

• 
  @roadkill81612 ай бұрын

  I just bought an aftermarket exhaust it sounded great but I immediately changed back to stock after hearing how loud it was, going to do this tomorrow hopefully I can use it without angering everyone of my neighbours lol

• 
  @bachkim44852 ай бұрын

  How to calibrate it?? Otherwise useless

• 
  @boyinabluedress3 ай бұрын

  Thank you for your help!!!

• 
  @alfypierri80223 ай бұрын

  Hi. Thanks for the video. Can you let me know when connecting the tachometer wire to the coil . What to do if i have 2 coils

• 
  @selfcaresamantha3 ай бұрын

  Great video - it took me 5.mins to do both lights.

• 
  @steveharris27683 ай бұрын

  Will this work on a 48 V set up on golf cart batteries

• 
  @luistelles87193 ай бұрын

  So im writing a book, main character is gifted a harley fatboy to fix up by his father and the kid ends up. Riding at late hours lets just say 😂 would he be able to tune the fatboy so it would be near silent? Im not too versed in mechanics and was wanting him to maybe make his bike quite but not sure if thats possible.

• 
  @Totschlagen17993 ай бұрын

  Awesome, thanks so much for the video that's to the point.

• 
  @philwarner66043 ай бұрын

  I am trying to add a digital tach to my 89 Yamaha TW200 but the coil has one positive connection from the CDI and it is grounded on the negative side. connecting the sensor wire to the positive coil wire does not make it work nor does connecting the sensor wire to one wrapped around the spark plug wire like an induction tachometer. Is there a place on the CDI unit or the stator wiring that is safe to connect the signal wire? One that will trigger the digital tachometer?

• 
  @happybakery63873 ай бұрын

  Thank you, you saved me! I could do this on my own while wearing a sundress so anyone can do it. The lid was hard but W40 worked fine and it helps I'm not weak even if I'm 50 yo and just 108 lbs. I feel so empowered thanks to you 😅

• 
  @kurtisca3 ай бұрын

  While this is a straightforward task, this video is invaluable in making this go smoothly. Thanks for sharing this.

• 
  @chuniquepaceno4703 ай бұрын

  Thanks for the tutorial, about to take my '79 750 out of winter hibernation and replacing the fork seals is on the to-do list before taking her out. You make it look easy, appreciate the show.

• 
  @jimmysapien99613 ай бұрын

  Very nice but on the car battery you could Put on a Different connector to the Disconnector- instead of using the Original round Battery connector. This way there is a Solid hold ..

• 
  @shzwon1234 ай бұрын

  I had so much difficulty getting the plastic cover out. Sprayed some WD-40 and waited a couple of minutes before trying again. I finally was able to push it 1/8 inch and pop the cover out.

• 
  @snottyvar4 ай бұрын

  I love the low budget yet functional quality vibe. I am in the middle of the same job and I'm spending a day bead blasting, polishing or painting all the parts involved. I get that other people may not have the time or have realized nature will win anyway. Fix them and ride them. Cheers

• 
  @Gruntled20014 ай бұрын

  Helped me a lot, thank you. Good call on disconnecting the oil sensor wire.

• 
  @alexfelder24 ай бұрын

  Thank you Bro I only had 23 for the bulb, and they wanted to charge me 60 bucks at the garage. Went to Walmart got the bulb and I changed it, with your help. Thanks again.

• 
  @alexfelder23 ай бұрын

  Question? I changed the bulb and it was fine then it went out. I checked and the pig tails in the cover melted and the bulb melted at the contact point what caused that?

• 
  @Mike_Barker3 ай бұрын

  That's odd... Maybe the connection not be 100%...? I've never run into that.

• 
  @Ysidoroh4 ай бұрын

  Nice. Ours didn’t have the cover on it so we were super confused from the manual.