Пікірлер

• 
  @NasreenShaik123Ай бұрын

  Super cool 😎

• 
  @myshticaanimo2169Ай бұрын

  But why dont they use vaccum case?

• 
  @AyuelAyuel-jm3mwАй бұрын

  ❤❤❤❤

• 
  @111instonАй бұрын

  Best Gate

• 
  @111instonАй бұрын

  Super 😀

• 
  @28_rakaiamordittos.93Ай бұрын

  what is ic and datasheet?

• 
  @edmondhodaj5817Ай бұрын

  It makes sense once you see it

• 
  @Arlemowy3 ай бұрын

  Can I connect the OUTPUT 2 pin to something other than the coil and diode? To something that will control the connection between the battery and the coil and diode. Depending on the signal on pin 2, something will connect and disconnect the battery from the coil and diode. Will I achieve, for example, 10A with an LM2596t which has a max of 3A

• 
  @Slicudis3 ай бұрын

  This is for the people who dont know about this: This is the XNOR gate, the inverted version of the XOR (Exclusive-OR) gate. It's the combination between the XOR and NOT gate. In the normal XOR gate, if the inputs are different from each other, the output will be 1 (Example: 1 XOR 0 = 1) If all the inputs are the same value, the XOR gate will output 0. The XNOR gate does the opposite value that an XOR would do. Logic gates are commonly used in integrated circuits, like a Central Processing Unit. You can see in the video that the guy is using transistors because that's the component used to make logic gates. If you want to have a better knowledge about this, you should learn some Boolean Algebra.

• 
  @alfredjohnfajilagot41273 ай бұрын

  My ears are blessed. Thank you.

• 
  @MahendraMandavi-hx6jc4 ай бұрын

  😊료 도 있다 보니 정말 많은

• 
  @geminirocks14614 ай бұрын

  Very helpful

• 
  @vladik4ek4 ай бұрын

  СХЕМУ!

• 
  @chrisgoldbach44504 ай бұрын

  Not sure how I got here or what the hell any of that means😂😂

• 
  @KARANSHARMA-nx4eu4 ай бұрын

  crystal clear concept without theory.

• 
  @anuraggurjar91974 ай бұрын

  Thanks ❤

• 
  @user-dn5iu2ei7i5 ай бұрын

  Awesome 👍😎

• 
  @killuahateke11885 ай бұрын

  Thx for help

• 
  @amnfox5 ай бұрын

  I don't understand how 0 + 1 is 0 for 1 + 0 is 0. I would have thought the outputs would have been: 1 1 1 0

• 
  @emadamody36815 ай бұрын

  I think that outputs will be correct for OR Gate but this is NOR which I think is the opposite of OR.

• 
  @amnfox5 ай бұрын

  @@emadamody3681 thank you

• 
  @I.Y.V.5 ай бұрын

  Yes ikr because both on should be off too

• 
  @iusupremacy76336 ай бұрын

  Can u give me the tutorial how to make it?

• 
  @avishasrivastavaxi-e72557 ай бұрын

  How much ohm the resistor is?

• 
  @Imanonymous476 ай бұрын

  Bro wtf

• 
  @avishasrivastavaxi-e72556 ай бұрын

  @@Imanonymous47 what happened?

• 
  @jayantadeb98097 ай бұрын

  Did not understand anything but watch it 2-3 time because of its sound 😂

• 
  @Rizvi_ngl7 ай бұрын

  Yeah😅😂

• 
  @hingsunhome5 ай бұрын

  Explanation: If only 1 of the inputs are on, the gate doesn't give an output. Otherwise, if either none or both of the inputs are on, it gives an output.

• 
  @PankozKumarАй бұрын

  I am too😁

• 
  @afshankhan23387 ай бұрын

  Bro video of how make it😅

• 
  @Yash-bq8ui7 ай бұрын

  So this answer is the question😅

• 
  @kennnyyyyyy117 ай бұрын

  Y = ? Iska expression kya ayega

• 
  @avishasrivastavaxi-e72557 ай бұрын

  Kitne ohm ka resistor hai

• 
  @AlexPressure7778 ай бұрын

  thanks

• 
  @Nightmare123478 ай бұрын

  Hlo can 200V resistor be used?????

• 
  @alang.20547 ай бұрын

  What do you mean by 200V resistor? If you meant ohms, that wouldn't make much sense

• 
  @niqilos8 ай бұрын

  What does XNOR mean? i have forgotten

• 
  @WoofOfficial5 ай бұрын

  Exclusive Nor

• 
  @niqilos5 ай бұрын

  ​@@WoofOfficial.. Thanks

• 
  @fortune39118 ай бұрын

  Thank you very much

• 
  @sochshorts65058 ай бұрын

  Hello bhai I want full video on this circuit

• 
  @omarfarukmonster34599 ай бұрын

  WTF is that?

• 
  @AlpitGadhave9 ай бұрын

  Can you please tell which did you use in this project

• 
  @vinamramishra71579 ай бұрын

  really cool!

• 
  @RanjitDas-xo2bo9 ай бұрын

  Nice👍

• 
  @Hobidevrem10 ай бұрын

  thanks dude. I tried a lot but I couldn't do it, I watched a lot of videos. I was able to do it thanks to your video 🙏

• 
  @user-nf2hs7be1d10 ай бұрын

  don't understand😢😢

• 
  @Shywolf211 ай бұрын

  I view the OR gate as a joint node for two inputs.

• 
  @tipping_down11 ай бұрын

  Please explain more about the circuit making in logic gates. Your videos are easy to understand those terrifying concepts

• 
  @a21123 Жыл бұрын

  nice dude. ve been searching for these type of example for a while thanks

• 
  @zeeshan2134 Жыл бұрын

  Sparking between two points but many time of use relay high current passing points and carbon layer produce. Question is how clean the black carbon points and use the long time.

• 
  @electronicssimplified Жыл бұрын

  Cleaning carbon from contacts is just a temporary solution to get the relay working. If possible, replace the relay with appropriate current rating otherwise use high sandpaper to clean the contacts.

• 
  @Pfannenstiel1987 Жыл бұрын

  What is the difference between this XOR gate and an OR gate?

• 
  @electronicssimplified Жыл бұрын

  OR is true if at least one of the operands is true. XOR is true if exactly one of the operands is true.

• 
  @kokluceersin8211 Жыл бұрын

  Hello In the circuit we set up in this way, how do we turn the leds on and off with the help of a switch?

• 
  @electronicssimplified Жыл бұрын

  Physical switch or digitally like with transistors?

• 
  @ramboroblox5367 Жыл бұрын

  NOT where ?

• 
  @Gamingshowge4by Жыл бұрын

  Can I use 860 resistor?

• 
  @satwikmeshram3605 Жыл бұрын

  Thank you

• 
  @satwikmeshram3605 Жыл бұрын

  Nice 😌 yaar 😊😊☺️😊

• 
  @mlee6050 Жыл бұрын

  Thought I ask here quickly, is there a gate so if appliance 1 is activate it disables appliance 2 but possible at house power level (in UK so 240v)

• 
  @electronicssimplified Жыл бұрын

  You can use 2-way switch for this application. Connect one appliance to L1 terminal of switch and other on L2 terminal. But one of the appliance will always remain on. If thats what you want.

• 
  @mlee6050 Жыл бұрын

  @@electronicssimplified I was more wondering if automatic way so if use one it disable other to not put too many amps on fuse, like one being a bidet and other being air con as they be on 13amp so if bidet used it stops Aircon from running/powered

• 
  @electronicssimplified Жыл бұрын

  @mlee6050 i don't know if there is such device available in the market. But if I had to make a mechanism that you want, I would use a microcontrollers such as Arduino which will sense when one appliance is turns on using a current sensor and automatically turns off another using power relay.

• 
  @wecantrybetterdpokusajmobo7892 Жыл бұрын

  Awesome video, very well explained. I spent 2 and a half days, building that kind of circuit, and not any schematics doesn`t worked for me (because of that I had a different relay, with different pinout) until I watched Yours video, and after a few hours I made it and it works exactly as it should be. Thank You very much, You are my new friend :D

• 
  @electronicssimplified Жыл бұрын

  Glad, i was able to help.

• 
  @electronicssimplified Жыл бұрын

  DIY Electronics Store (10+% off on all products): diy-electronics.mini.store/ [Delivery across INDIA]

• 
  @ebyelektronik8080 Жыл бұрын

  111