2D LED MATRIX CD4017B+CD4022B | Led Project
Ғылым және технология
2D LED MATRIX CD4017B+CD4022B | Led Project
🔴Subscribe for more video like this: bit.ly/3021yic
2D LED MATRIX CD4017B+CD4022B | Led Project
In this project, I have made 2d LED Matrix consisting 80 Leds with 10 rows and 8 columns. The Led Matrix is controlled by ICs- CD4017(for rows) and CD4017(for columns).
CD4017 and CD4022 are johnson counter ics which requires clock pulse to switch between each Output. The clock pulse is generated by 555 timer ic using its Astable Mode.
Project Files: bit.ly/3kpiXKL
⚠️IF YOU ARE NEW TO ELECTRONICS PLEASE BE CAREFUL WITH SOLDERING IRON (IT CAN EASILY BURN YOUR SKIN) AND DO NOT START WITH ⚡HIGH VOLTAGE(AC), STICK WITH LOW VOLTAGE (BATTERIES) UNTIL YOU GAIN SOME EXPERIENCE.
🛒If you want to make this project, you can check these links:
CD4017B IC: amzn.to/2BiLMXE
CD4022B IC: amzn.to/2Dv2YdF
555 Timer IC: amzn.to/38NarQz
2-Pin Terminal Block: amzn.to/39u7PHA
Potentiometer 10k ohm: amzn.to/2B33NsS
Perfboard: amzn.to/30zh5pZ
9v battery: amzn.to/2BYUCu4
Battery connector: amzn.to/2ZlZWkf
16-pin DIP socket: amzn.to/3jn9G5H
8-pin DIP socket: amzn.to/2BjsO3a
Toggle Swtich: amzn.to/3fPqi3T
White LEDs: amzn.to/3gyqdSm
Resistor Kit: amzn.to/3knHekI
BC547 Transistor: amzn.to/3fEubrs
🛒If you want to start electronics, here are some links of basic equipments-
Soldering Kit: amzn.to/2BZ6VXj
Electronics Kit: amzn.to/2Q56AWp
🎥Video equipment:
I just use my phone mobile
✔️For more electronics projects make sure to subscribe:
bit.ly/3021yic
MUSIC CREDITS:
Track: LFZ - Popsicle [NCS Release]
Music provided by NoCopyrightSounds.
Free Download / Stream: ncs.io/PopsicleYO
MUSIC Jensation - Joystick [NCS Release]: bit.ly/2ZZzvkq
NCS: Music Without Limitations: bit.ly/33EcWEm
Music: Elektronomia - Summer Vibes
Watch: • Elektronomia - Summer ...
Stream: spoti.fi/2UfMQ29
#electronicssimplified
Пікірлер: 27
DIY Electronics Store (10+% off on all products): diy-electronics.mini.store/ [Delivery across INDIA]
God of Electronics ❤️❤️👍🏻
Time lapse sure makes it seem simpler, and faster. Has good soldering skills also.
@electronicssimplified
2 жыл бұрын
Thanks and I will keep that in mind next time.
Satisfying to watch
Awesome soldering skills
@electronicssimplified
2 жыл бұрын
Thank you
Very nice idea
Good project and good soldering🤙🏻
Bohot badiya
Very good
Good video sir
😍😲😍😲😍😍
Nice. Next idea 3D cube .
thnx im work
Hello In the circuit we set up in this way, how do we turn the leds on and off with the help of a switch?
@electronicssimplified
Жыл бұрын
Physical switch or digitally like with transistors?
Using that drill on that circuit board was risky. I cracked a few boards doing that with drill.
I don't get a Linc in the description for circuit diagram. Now what?
@electronicssimplified
2 жыл бұрын
Project Files: bit.ly/3kpiXKL
I not use 555, I like &-logic. (4011) Why alcaline, why not 2x Li-ion?
@electronicssimplified
2 жыл бұрын
Here 555 is used to generate pulse and 4011 is a 4 Nand gate ic. Yes you can use Lithium ion battery ( Min. Voltage: 4.5V and Max. Voltage: 16V)
@phitrow
2 жыл бұрын
@@electronicssimplified You can also to do 2 generator on IC CD4011. 2xCell for horizontal, and 2 cell for vertical.
Can i get diagram
@electronicssimplified
2 жыл бұрын
It's in description >> Project files
Give me circuit diagram please sir
@electronicssimplified
2 жыл бұрын
It's in description. Google drive link