Ive got an '85 GS300L, fun small cc bike. Gotta figure out where to get vacuum for the petcock, currently only runs on the prime setting.
@l3arrett8212 күн бұрын
that little sht is slicker than snot on my knob
@williamerwin610012 күн бұрын
I hope mine is just as simple. Rode one day… no fuel pump the next day
@johnwahlers336315 күн бұрын
Great video buddy!!! All but the shower of tools!! Lol
@josephblake559516 күн бұрын
need more steps you just show the part and take it off not every hose needed shitty tutorial
@fallentrinity487516 күн бұрын
I don't know if you will respond to this because its an old video but I have a 1998 Yamaha xv250 and I'm having trouble getting the bike to start I was wondering if you would be willing to help me out ?
@donmiles336118 күн бұрын
What fluid do you have in the ultrasonic cleaner? Is it just water as well??
@jameshorton765121 күн бұрын
How did you connect the pig tail?
@bsr560923 күн бұрын
What is this water you use for clean ? its tenner ?
@youngyeller24 күн бұрын
i would be proud of it too. the red and black and whitewalls look good.
@tomkeubler572329 күн бұрын
I have a 96 600 dual carb I ripped everything off of the vacuums all that homemade velocity stacks on it cuz the other ones are too tall but it won't run unless I put a screen with a piece of foam in there
@MrBlack-wt5erАй бұрын
Maybe color mark the hoses with nail polish and color mark where the hoses will go back
@01cissyАй бұрын
You guys rocked it. I had to subscribe. I know about the cold hands thing as well. Happy to see a shop as messy as mine. BBgun,Spokane Wa.
@raybrensike42Ай бұрын
So how does having the pleats of the filter open to the rain and bugs work out? Any problems?
@chukm9622Ай бұрын
I can get mine to run on, on for a minute or two but then it slowly dies. Can run on prime no problem, but it will leak gas like no other. Can run on on but will slowly overflow on fuel.. any tips? I'm wondering if it's a vaccum issue, but i have recently replaced the petcock, thinking the original was bad. Possibly flooding the carbs?
@Kenneth_McGrewАй бұрын
yeah but what does it look like after a few months on the road...
@azureazurakai2534Ай бұрын
Question sir, did you change your cable kit to make it fit on the riser. Thanks in advance.
@laurenanderson7823Ай бұрын
mine will make the sound like it's trying to start, when i push the button, but, like, it doesn't ignite or something. i'm thinking it's a battery connectivity issue. but, all of this is new to me.
@laurenanderson7823Ай бұрын
i have a 2007 125 that won't start
@garethlipyeart6520Ай бұрын
leave the throttle alone all you will do is flood it
@atomicdmt87632 ай бұрын
@7min! leaking fluid from the resevoir....no rags...........not good on the paint.
@Berengier8172 ай бұрын
I just got mine a few weeks ago and soon as i saw it, i knew i wanted to customize it. Beautiful video
@kenbugher15902 ай бұрын
I would have actually glued the whole surface top and the backing of the vinyl push it in place smoothed it out then brought it around after dried and stapled
@deangilles7182 ай бұрын
Do us a favor and find out who worked on them carbs (floats were brand new with no gas stain) so none of the people that see this video use him! lol Doesn't matter what you do to them carbs they will not operate correctly without the air box installed on the bike. Constance Velocity (CV) carburetors need back pressure to be balanced. With out the airbox there will always be a flat spot in your acceleration, always! The air pressure on the inward set will be lower the the outer two carbs and it will only get worse the faster you go, there is no way around it!
@Bearedmoonmonster2 ай бұрын
Wow your awesome, I have a 2002 vstar 1100 when I put the key in turn signal and horn work when I try to start it no power I hope this my issue because when I turn the kill switch on then press it to ignite it’s not no noise no nothing but the horn and turn signal work. I replaced the relay, changed oil and filter, i have the battery charging now o yea one question, what will make the battery go dead? 🤔
@Matt-dg6ue2 ай бұрын
Thank you for this video. Where does the hose that comes off the breather box go?
@elmert842 ай бұрын
I wonder what the towing capacity is with that hitch
@Nunya3692 ай бұрын
Did it crack after hitting ramps, kerbs etc?
@freddymoberg2502 ай бұрын
Nice video! 👍🏻
@jimmyredd52292 ай бұрын
Where you get that air box replacement I can't find one
@jesusrios96302 ай бұрын
do you have to extend the hoses?
@elvism6842 ай бұрын
Those mud flaps have a gap because your truck doesn't have fender flares(trim) on it and you bought the mud flaps for trucks that do.
@WowItzAkina2 ай бұрын
Leave it to the old heads to teach the new guys like me how shits done😂
@MrDaryca2 ай бұрын
I need your old handlebar 🙂
@josephdavis17972 ай бұрын
Wow!! That was pretty good it had you for a while but you got it working thanks for sharing 👍
@haydnthompson89262 ай бұрын
I got the same bike and it was my first bike, got it running and running pretty good! Mine is all stock minus some blinkers and straight pipes i put on it. I have that similar issue where the clutch is way out but ive adjusted it as far as i could and its barely good enough, i put new clutch discs in it and i have a brand new carb on the way aswell as a stage 1 jet kit to get her singing good. I dont ride it enought because i have newer faster bikes but i almost want to upgrade the sprokets but i can get to 80 just barely which i think is fine i jist use it to put around. Love your bike! They may not have alot of power or speed but man are they fun even for experienced riders lile us. Keep up the info amd videos!
@4player-tl1ix2 ай бұрын
I'm thinking of putting a short screw nail in the handle of a Cold steel pole axe, will the wood split?
@xaviermunguia092 ай бұрын
What’s the link to buy it ? My friends buddy stalls and the carb was al ready cleaned do you think this can help? Thank you.
@silversurvivor3 ай бұрын
With all due respect they're still white on the red frame and the one side of the white is thinner then the side that is facing the motorcycle. I feel like it might have been better if you used a brush instead of the spray so you could get a better detail. Just my opinion and I don't want to sound negative because it does look okay and it's a great concept good job.
@josephdavis17973 ай бұрын
It's looks like the fuel relay did the trick, was not the solenoid
@rionshadows3 ай бұрын
How tall are you? How do you find the wind noise with that height of wind screen?
@JD-gm5ol3 ай бұрын
Have not found any video on this! Does the winch plate actually work After installed Or is it just for looks?
@anselames87213 ай бұрын
Very helpful. Thanks dude!
@choppergirl3 ай бұрын
Front tire probably flexes more
@BeckVMH3 ай бұрын
March 2024, apparently no longer available on Amazon. Just FYI the circular vents on the 2014 (like yours) do not accommodate the other type vent mounts due to the mount’s attachment support not extending far enough back over the large vent flaps, max extension is about 7/8” into the vent.
@danielbanks35893 ай бұрын
Where did you get the seat?
@steevenknox42663 ай бұрын
Man that looks great,I'm going to paint my wheels red and black and do the white walls just like this😍
@edwinramos46694 ай бұрын
Looks good I have a question when you change the sprockets to change the gear change is there anything else that has to be done or adjusted to the bike or does changing the sprockets fix automatically and done
@craventheboom3 ай бұрын
Swap sprockets and make sure you have a new chain with the right amount links and your good to go.
Пікірлер
Ive got an '85 GS300L, fun small cc bike. Gotta figure out where to get vacuum for the petcock, currently only runs on the prime setting.
that little sht is slicker than snot on my knob
I hope mine is just as simple. Rode one day… no fuel pump the next day
Great video buddy!!! All but the shower of tools!! Lol
need more steps you just show the part and take it off not every hose needed shitty tutorial
I don't know if you will respond to this because its an old video but I have a 1998 Yamaha xv250 and I'm having trouble getting the bike to start I was wondering if you would be willing to help me out ?
What fluid do you have in the ultrasonic cleaner? Is it just water as well??
How did you connect the pig tail?
What is this water you use for clean ? its tenner ?
i would be proud of it too. the red and black and whitewalls look good.
I have a 96 600 dual carb I ripped everything off of the vacuums all that homemade velocity stacks on it cuz the other ones are too tall but it won't run unless I put a screen with a piece of foam in there
Maybe color mark the hoses with nail polish and color mark where the hoses will go back
You guys rocked it. I had to subscribe. I know about the cold hands thing as well. Happy to see a shop as messy as mine. BBgun,Spokane Wa.
So how does having the pleats of the filter open to the rain and bugs work out? Any problems?
I can get mine to run on, on for a minute or two but then it slowly dies. Can run on prime no problem, but it will leak gas like no other. Can run on on but will slowly overflow on fuel.. any tips? I'm wondering if it's a vaccum issue, but i have recently replaced the petcock, thinking the original was bad. Possibly flooding the carbs?
yeah but what does it look like after a few months on the road...
Question sir, did you change your cable kit to make it fit on the riser. Thanks in advance.
mine will make the sound like it's trying to start, when i push the button, but, like, it doesn't ignite or something. i'm thinking it's a battery connectivity issue. but, all of this is new to me.
i have a 2007 125 that won't start
leave the throttle alone all you will do is flood it
@7min! leaking fluid from the resevoir....no rags...........not good on the paint.
I just got mine a few weeks ago and soon as i saw it, i knew i wanted to customize it. Beautiful video
I would have actually glued the whole surface top and the backing of the vinyl push it in place smoothed it out then brought it around after dried and stapled
Do us a favor and find out who worked on them carbs (floats were brand new with no gas stain) so none of the people that see this video use him! lol Doesn't matter what you do to them carbs they will not operate correctly without the air box installed on the bike. Constance Velocity (CV) carburetors need back pressure to be balanced. With out the airbox there will always be a flat spot in your acceleration, always! The air pressure on the inward set will be lower the the outer two carbs and it will only get worse the faster you go, there is no way around it!
Wow your awesome, I have a 2002 vstar 1100 when I put the key in turn signal and horn work when I try to start it no power I hope this my issue because when I turn the kill switch on then press it to ignite it’s not no noise no nothing but the horn and turn signal work. I replaced the relay, changed oil and filter, i have the battery charging now o yea one question, what will make the battery go dead? 🤔
Thank you for this video. Where does the hose that comes off the breather box go?
I wonder what the towing capacity is with that hitch
Did it crack after hitting ramps, kerbs etc?
Nice video! 👍🏻
Where you get that air box replacement I can't find one
do you have to extend the hoses?
Those mud flaps have a gap because your truck doesn't have fender flares(trim) on it and you bought the mud flaps for trucks that do.
Leave it to the old heads to teach the new guys like me how shits done😂
I need your old handlebar 🙂
Wow!! That was pretty good it had you for a while but you got it working thanks for sharing 👍
I got the same bike and it was my first bike, got it running and running pretty good! Mine is all stock minus some blinkers and straight pipes i put on it. I have that similar issue where the clutch is way out but ive adjusted it as far as i could and its barely good enough, i put new clutch discs in it and i have a brand new carb on the way aswell as a stage 1 jet kit to get her singing good. I dont ride it enought because i have newer faster bikes but i almost want to upgrade the sprokets but i can get to 80 just barely which i think is fine i jist use it to put around. Love your bike! They may not have alot of power or speed but man are they fun even for experienced riders lile us. Keep up the info amd videos!
I'm thinking of putting a short screw nail in the handle of a Cold steel pole axe, will the wood split?
What’s the link to buy it ? My friends buddy stalls and the carb was al ready cleaned do you think this can help? Thank you.
With all due respect they're still white on the red frame and the one side of the white is thinner then the side that is facing the motorcycle. I feel like it might have been better if you used a brush instead of the spray so you could get a better detail. Just my opinion and I don't want to sound negative because it does look okay and it's a great concept good job.
It's looks like the fuel relay did the trick, was not the solenoid
How tall are you? How do you find the wind noise with that height of wind screen?
Have not found any video on this! Does the winch plate actually work After installed Or is it just for looks?
Very helpful. Thanks dude!
Front tire probably flexes more
March 2024, apparently no longer available on Amazon. Just FYI the circular vents on the 2014 (like yours) do not accommodate the other type vent mounts due to the mount’s attachment support not extending far enough back over the large vent flaps, max extension is about 7/8” into the vent.
Where did you get the seat?
Man that looks great,I'm going to paint my wheels red and black and do the white walls just like this😍
Looks good I have a question when you change the sprockets to change the gear change is there anything else that has to be done or adjusted to the bike or does changing the sprockets fix automatically and done
Swap sprockets and make sure you have a new chain with the right amount links and your good to go.
Great show Thanks
Would that seat fit for a 2003 night train also?