Пікірлер

• 
  @chriskompara10152 ай бұрын

  I Used to Own one Myself and Loved To Ride it as much as I Could ❤!!

• 
  @davidkeeton67165 ай бұрын

  These would be great if they would just crank when you want them to. They are notorious for being finicky, hard to crank, a pain in the ass. I know, I have a Pursang.

• 
  @Freddiez435 ай бұрын

  This one sat for 5 years and started on 3rd kick. Proper maintenance and quality upgrades make a big difference. I know, I have a Sherpa T, 2 Fronteras and a Pursang.

• 
  @Workerbee-zy5nx6 ай бұрын

  Brand new, looks great. 🎉

• 
  @redtobertshateshandles9 ай бұрын

  They're simple, popular and parts are available.

• 
  @jppaine918110 ай бұрын

  I just bought a 79 Sherpa. I also have a 68 alpina and 67 metralla. Are you planning on putting the headlight and tail light back on it?

• 
  @justgjt Жыл бұрын

  Great video Fred. Thanks for taking the time and sharing.

• 
  @gdoggydog Жыл бұрын

  You should rather use equipment that is currently available to purchase.

• 
  @elobiretv Жыл бұрын

  Numbering the bolts is a waste of time, just throw them all in the holes loose and move them around until they all stick out equally and then you know they are in the correct place.

• 
  @Freddiez4310 ай бұрын

  I prefer to take a minute to number them so they all go in the right place then to put them in and then take them out until all are correct. Glad that you enjoy doing it the other way.

• 
  @rideallegretto1933 Жыл бұрын

  What jetting is used?

• 
  @Denvertubester2 жыл бұрын

  Nice tips here, thanks for the video

• 
  @ksqwerty12 жыл бұрын

  He’s so happy!

• 
  @georgelangstone6402 жыл бұрын

  Some segments in the video are stamped not adjacent to each other

• 
  @Freddiez432 жыл бұрын

  Huh?

• 
  @oregon_traveller2 жыл бұрын

  Good install and clearly loud! Did you have to drill holes through the panel to install the horns or used a bracket?

• 
  @Freddiez435 ай бұрын

  I drilled through the inner panel.

• 
  @peterkaiser57723 жыл бұрын

  Hello Fred, great Video! I've only one question, you connect the throttle Sensor at one Side of the T-piece and where ist the second point to connect?

• 
  @chriskompara10153 жыл бұрын

  I Used to Own one of these Badass Motorcycles Myself and Loved it !

• 
  @chriskompara10153 жыл бұрын

  Say Sound Off !

• 
  @chriskompara10153 жыл бұрын

  I used to own one of those Motocross Bikes Myself and I now wish I hadn’t Sold it !

• 
  @highwayman12183 жыл бұрын

  Great video. Ill be doing this soon with a valve adj. Thanks for making it, very informative. 👍

• 
  @smainbaba37733 жыл бұрын

  Thank you for your video however I have a slow motion problem and can fix it with a synchronization

• 
  @emfl44373 жыл бұрын

  This was an excellent video, great job.

• 
  @jmc104 жыл бұрын

  great video, thank you

• 
  @StevePlegge4 жыл бұрын

  Phtphtphtphtphtpht! I could do that on my FZ09. 👍 Enjoy your new toy! 👍

• 
  @Freddiez432 жыл бұрын

  You should!

• 
  @olliechristopher4674 жыл бұрын

  Thank you Fred!! I was going nuts trying to do mine this morning. For the life of me I could not get my screwdriver on the adjuster. DUHH!! Too hard with the tank bolted down. I just did my first spark plug change and buttoned everything back up. I see you lifted your tank to do the sync!! Very good!!

• 
  @jamesleitholf91194 жыл бұрын

  Thank you for taking the time to make this video, Fred. Well done!

• 
  @alanrossjohnson4 жыл бұрын

  So, how did this plow hold up after 5 years?

• 
  @Freddiez433 жыл бұрын

  Held up very well. I now have it on a larger mower.

• 
  @Freddiez435 ай бұрын

  I held up well. Later mounted it to a newer Exmark zero turn.

• 
  @anomie67884 жыл бұрын

  Did it make a difference when you backed out the screw 3/4 of a turn, did it change your idol or anything. ??

• 
  @Freddiez434 жыл бұрын

  It did not change the idle. Just seemed to have a slightly quicker throttle response off of idle.

• 
  @kentuckyjustice14084 жыл бұрын

  I saw a guy (in a video) remove his NSU bolts and replace them with Lock Tight, without removing his clutch assembly. He made a special off-set driver that fit the bolts. It was pretty cool, but I like using the wire securement method much better. You just can't beat that wire back-up.

• 
  @ckkrons23384 жыл бұрын

  Have a link to that video? I was thinking of doing it without pulling the clutch.

• 
  @JeremyThePlayer885 жыл бұрын

  You captured lots of footage here! The most noteworthy part was at 11:36 when that hawk chick was eating a large piece of a frog, then it tried swallowing it in one bite! That's pretty cool! It always makes my day seeing that!

• 
  @Freddiez434 жыл бұрын

  Glad that you enjoyed it. We are eager to see if any vome abck this year to use the nest to raise another family.

• 
  @elituko5 жыл бұрын

  I give my neighbors a dose of that music every few days on my 71 Pursang 350.

• 
  @ginabataille17965 жыл бұрын

  Kitty giving instructions to Dad.

• 
  @franstgogr3655 жыл бұрын

  nice video , l like so much this song ; and I do the same with my Yamaha xjr 1300 , regards from spain

• 
  @Freddiez434 жыл бұрын

  Thank you. I am glad that you enjoyed the video. I have 3 bikes that were made in Spain, all Bultacos.

• 
  @StevePlegge5 жыл бұрын

  Kitteh help! Almost as good as dog help.

• 
  @TheGTOsDaddy5 жыл бұрын

  Do you remember where you bought that rear fender? Thanks Dylan

• 
  @thomaspease2086 жыл бұрын

  really adorable

• 
  @blindsquirrel48826 жыл бұрын

  Hi Fred, Is it important to have the two tubes the same length, or did you just add the length of tube for the T fitting?

• 
  @douglasrhine46406 жыл бұрын

  Screws were lose for sure

• 
  @douglasrhine46406 жыл бұрын

  Nice video

• 
  @bandit4464846 жыл бұрын

  My friend made one out of air tube and a yardstick and transmission fluid to synchronize or Super Teneres. It transforms the throttle control so much better. It’s as smooth as silk now. No on offf with the throttle. What a transformation.

• 
  @Freddiez436 жыл бұрын

  Yes, that will work. The Harmonizer just makes the process easier and is more accurate.

• 
  @collinrobinson43066 жыл бұрын

  Where did you get your speedometer at !?! It's exactly what I want.

• 
  @Freddiez436 жыл бұрын

  I got the speedo from Bajadesigns.com at the same time I bought the dual sport kit from them. Looks like it went up in price a bit, as I paid about $50 and now it is $69.95. It connects to the stock odometer cable and is very accurate according to my GPS. Here is the link: www.bajadesigns.com/products/Speedometers.asp

• 
  @collinrobinson43066 жыл бұрын

  Fred Ziglar Awesome! Thanks man love your bike!

• 
  @border4116 жыл бұрын

  How many discs did you have on?

• 
  @Freddiez436 жыл бұрын

  I'm not sure, as I later replaced that with a Supertrapp IDS2 with quiet core.

• 
  @TheWrate7 жыл бұрын

  Thanks for your video. What are the velco pads side panels used for?

• 
  @Freddiez437 жыл бұрын

  I have a velcro pad on the left panel only. I velcro the controller for my heated jacket liner there.

• 
  @yasinkose7 жыл бұрын

  Hello boss. I think at first you unplug the Air pressure sensor hose. you should note it on the video that was wrong. I am right ha?

• 
  @Freddiez437 жыл бұрын

  Greetings. Did I not mention removing that hose at 4:31?

• 
  @decaptt7 жыл бұрын

  is it a must to have the T tube to connect the vacuum and sensor? cause my kit comes with two long tubes for the vacuum only... so i have to go out and buy a t tubing?

• 
  @Freddiez437 жыл бұрын

  Yes, it is a must so that the sensor is operational as normal while you are running the engine.

• 
  @decaptt7 жыл бұрын

  Fred Ziglar thx man, anyway the tubings are what size. gonna do it tmr

• 
  @jollyrgr28547 жыл бұрын

  Great job. Thanks.

• 
  @Freddiez437 жыл бұрын

  I'm glad that you found it helpful. Thanks for the feedback.

• 
  @BartSmaalders7 жыл бұрын

  That's much much clearer than the manual. Thank you!

• 
  @Freddiez437 жыл бұрын

  Hi Bart. I'm glad that you found it helpful.

• 
  @Freddiez437 жыл бұрын

  Of course that is a 12 mm wrench to loosen th tank pivot bolt. Sorry 'bout that. :-)

• 
  @manflinflaification7 жыл бұрын

  Thank you. Great video. Very clear and simple.

• 
  @ngzcaz8 жыл бұрын

  I also have a gravel/stone driveway. I raise the blade to leave about an inch of snow so my driveway doesn't end up in the yard. I'm surprised it pushes that well since I didn't notice chains on the wheel.

• 
  @Freddiez438 жыл бұрын

  One thing I did was to put about a gallon of windshield washer fluid in each tire and that helped with traction. This video was one of the first times that I used the blade and since then have raised the blade a bit, as you say.

• 
  @serguti8 жыл бұрын

  Love it!! the OEM horn is a joke.

• 
  @Freddiez438 жыл бұрын

  Thanks. I got them from Amazon and the pair was only about $20, plus a $5 relay.

• 
  @VPB19708 жыл бұрын

  Thank you for sharing you knowledge. Very informative.

• 
  @austinsillman148 жыл бұрын

  this is great thanks!