Пікірлер

• 
  @shrikantu3769Күн бұрын

  I want to ask about this career , kindly provide your insta id

• 
  @AkarshPasi-l1i5 күн бұрын

  can you share PDF of this session... I was also there in the GIS for Climate Change MOOC... Somehow, I deleted that PDF. Really appreciate and its URGENT

• 
  @JosephBondinoba8 күн бұрын

  I followed the process but when I composite the bands it came as follows Red band-1 Green band-1 Blue band -1 And when I expand it still comes the same way showing all the seven bands

• 
  @spaceremotesensingandgis56267 күн бұрын

  You need to select all the band separately then it will not come

• 
  @surveynevis36459 күн бұрын

  Thank you for sharing

• 
  @mdnahidferdous626510 күн бұрын

  How could i save it for sharing with others? like mp4

• 
  @suryatoy37910 күн бұрын

  Using 3d animation tool you can do that

• 
  @mdnahidferdous62657 күн бұрын

  @@suryatoy379 i tried but i can't do that

• 
  @Daneil269010 күн бұрын

  Great video Sir. Can this simulation be used in research paper? and we can draw results?

• 
  @suryatoy37910 күн бұрын

  Yes you can but in that case use high resolution dem and include all the parameters. Then it will be a good work.

• 
  @Pariyaspalette12 күн бұрын

  Thanks for your helpful video. I am attempting supervised and object-based image classification using Arch Pro (V.3.2). Here are the steps I have followed: I acquired Sentinel-2 imagery and combined bands 2, 3, 4, and 8 (10m resolution). I performed image segmentation. I created a classification schema. I generated training samples. However, when I attempt to classify using a support vector machine classifier, I encounter the following error: ERROR 003436: No training samples found for these classes: Soil, Water, Impervious, Grass, Tress. The table was not found. [VAT_Segmented_202407110934456475089_interIndex] The table was not found. [VAT_Segmented_202407110934456475089_interIndex] Failed to execute (TrainSupportVectorMachineClassifier). Failed at Thursday, July 11, 2024 9:44:52 AM (Elapsed Time: 0.22 seconds) I have tried several times but haven't been able to identify the cause of this error. Do you know what might be causing it?

• 
  @yeseniamin10219 күн бұрын

  Interesante!

• 
  @spaceremotesensingandgis562619 күн бұрын

  Thank you very much

• 
  @prajwalparmar416825 күн бұрын

  Interesting

• 
  @tzed430726 күн бұрын

  Hi, where did you get data from?

• 
  @spaceremotesensingandgis562623 күн бұрын

  This is Landsat 8 data. I taken it from earth explorer. But you can take it from living atlas also.

• 
  @Sahil_Yeolekar27 күн бұрын

  Hi Sir, I couldn't understand how to add points on the map. I want to add a few points on the map just like yours from the attribute table, and want the camera to trace them in the animation. How can I do it?

• 
  @spaceremotesensingandgis562627 күн бұрын

  i am sending you video link check that you will get an idea. kzread.info/dash/bejne/k5yMxquOpLGWeso.html kzread.info/dash/bejne/ia5k07GtlqTecrQ.html kzread.info/dash/bejne/mn6Ko9VqpanXmLA.html kzread.info/dash/bejne/ZIF3x5SsfdPRp7A.html

• 
  @Sahil_Yeolekar26 күн бұрын

  @@spaceremotesensingandgis5626 Thank you so much

• 
  @Al_Sakib_RahmanАй бұрын

  Thank you so much sir

• 
  @spaceremotesensingandgis562627 күн бұрын

  Most welcome

• 
  @tfnbr827Ай бұрын

  Hello sir I recently watched one of your video on liss 4 data processing in arc. I am trying to analyse lulc using by liss 4 data. but it give errors after training point. Using svm. It something releted because liss 4 has only 3 bnads.

• 
  @spaceremotesensingandgis5626Ай бұрын

  just check what error is coming . Its may be some technical issue. Better contact to esri customer care they will solve the issue.

• 
  @litayortegaАй бұрын

  Hello sir, great tutorial, does sentinel2 images en .jp2 can be useful? thanks

• 
  @spaceremotesensingandgis5626Ай бұрын

  Yes it is useful for any analysis

• 
  @deepabala-uo9ykАй бұрын

  HI, What is the procedure to get the Login Credentials to download the Orbit File.

• 
  @spaceremotesensingandgis5626Ай бұрын

  This login is not working now as sentinel hub was changed. You just continue without login.

• 
  @deepabala-uo9yk18 күн бұрын

  @@spaceremotesensingandgis5626 Input Radar part is not reading my IW Manifest.safe file. I have downloaded from SAR Data from copernicus. Why it is showing error?

• 
  @deepabala-uo9ykАй бұрын

  What is the procedure to get the Login credentials to download the orbit File.

• 
  @wildlifeireland95142 ай бұрын

  what an amazing help that can actually be followed....thanks....started arcgis pro last month!

• 
  @spaceremotesensingandgis5626Ай бұрын

  Thank you very much for motivation

• 
  @adamdzuhri54282 ай бұрын

  ​​Now I'm stressing to do my thesis, I don't know how to handle all the burden. I'm truly sad what I'm facing right now

• 
  @spaceremotesensingandgis56262 ай бұрын

  Do not take any stress just try to learn and enjoy your work. I am sure you will do great job. First break your work in small parts and try to finish one by one. make a plan and Follow it.

• 
  @NadeeshaSamaranayake-rl2cf2 ай бұрын

  Hi, can i see part 2 of this video?

• 
  @spaceremotesensingandgis56262 ай бұрын

  Yes its there please check

• 
  @spaceremotesensingandgis56262 ай бұрын

  kzread.info/dash/bejne/pH9rk6aFY9i6qcY.html

• 
  @Nat-yv8iz2 ай бұрын

  Hello, Sir. So, technically, can we do it using SAR imagery? like Sentinel-1

• 
  @geovisions119162 ай бұрын

  How to convert ASTER L1T radiance to TOA/BOA?

• 
  @subhanvhora89022 ай бұрын

  I've tried many times, but the temperature readings I'm getting for the land surface are between -1 and 6 degrees Celsius. This doesn't match the usual winter temperatures in the area, which should be between 15 and 30 degrees Celsius. I'm not sure why this is happening and I've run out of ideas on how to fix it. Can you help me figure out what's going wrong? Any advice you have would be really helpful. Thanks.

• 
  @subhanvhora89022 ай бұрын

  It is level 2 data for delhi

• 
  @spaceremotesensingandgis562627 күн бұрын

  Please try with other date data on same month and check is that value is coming same. If not then there is problem with that data. validate like this way.

• 
  @SheikhAneaus3 ай бұрын

  Hi, i wanted to know on basis have you used these transformations, can you share any pdf related to that?

• 
  @geoempowerinitiative73903 ай бұрын

  Thanks for a wonderful tutorial. Tutorials like this are very scarce. However, could you please show how to acquire the data and kindly share to help us practice the workflow? Thank you!

• 
  @AhmedJama-gl2be3 ай бұрын

  THANK SIR I have noise mapping in my graduation project by using this app, kindly how I contact you

• 
  @spaceremotesensingandgis562627 күн бұрын

  How can I help you?

• 
  @mohamedabdalla6053 ай бұрын

  Failed to add data, unsupported data type. manifest.safe\Container

• 
  @mohamedabdalla6053 ай бұрын

  when im add it Its not open in arcgis pro

• 
  @spaceremotesensingandgis56263 ай бұрын

  Do you have image analyst ? select the main.safe file and try to open it will open directly. But you need to do correction.

• 
  @deepabala-uo9yk18 күн бұрын

  @@spaceremotesensingandgis5626 Yes For me also it is not opening in arcgis pro. After downloaded IW.Manifest file is not opening. I have the image analyst also

• 
  @user-ju3rs8tg5v3 ай бұрын

  Good morning, Please, how can I convert the rainfall of the year that begins from 01 January and ends in 31 December to another that begins from September 1 and ends on August 31 (agriculture (year)? I us the multidimentionnel data raster : agg_terraclimate_ppt_1958_CurrentYear_GLOBE Thanks.

• 
  @spaceremotesensingandgis56263 ай бұрын

  There is one tool multidimensional layer clip. I am requesting you please use that in arcgis pro

• 
  @wildlifeireland95143 ай бұрын

  Great....but slow down

• 
  @spaceremotesensingandgis56263 ай бұрын

  Sure will follow in future to slow down.

• 
  @pratikdesai69933 ай бұрын

  Hello sir how to contact you?

• 
  @spaceremotesensingandgis56263 ай бұрын

  This is my mail id [email protected]

• 
  @josergztech3 ай бұрын

  How could floods be mapped with deep learning , sar and arcgis?

• 
  @spaceremotesensingandgis56263 ай бұрын

  Yes its possible will come with a video soon. Thanks for mentioning.

• 
  @user-wh8qk7lq2o3 ай бұрын

  how can i get hyperion data with L1R extension i have only data with he5 and its not working with hyperion tools

• 
  @spaceremotesensingandgis56263 ай бұрын

  I already shown in this video how to download Hyperion data please check that video you will get the answer.

• 
  @prajwalparmar41683 ай бұрын

  Is we are using already available dlpk then why are we training the deep learning model in the previous step?

• 
  @suryatoy3793 ай бұрын

  Both process showing there if you want to collect training samples then you can do that too.

• 
  @burakcoskun89253 ай бұрын

  this site doesnt open. Do I need to connect from Europe?

• 
  @spaceremotesensingandgis56263 ай бұрын

  may they change it will check and let you know.

• 
  @user-xc9ti6nn7r4 ай бұрын

  Thank you

• 
  @spaceremotesensingandgis56264 ай бұрын

  You welcome

• 
  @erinchristinebell20114 ай бұрын

  Fantastic tutorial. Quite helpful. Thanks a ton. :)

• 
  @spaceremotesensingandgis56264 ай бұрын

  Thank you very much

• 
  @shailangkharsati4 ай бұрын

  Where is the atmospheric correction video ? Couldn’t find in your videos

• 
  @spaceremotesensingandgis56264 ай бұрын

  kzread.info/dash/bejne/oJaYsrmSlsvRe7Q.html

• 
  @spaceremotesensingandgis56264 ай бұрын

  kzread.info/dash/bejne/q6F5y6aLpLexg5c.html

• 
  @dev92014 ай бұрын

  is there option to download world data for LISS..?

• 
  @spaceremotesensingandgis56264 ай бұрын

  No as of now its for India only

• 
  @shriramkathar16954 ай бұрын

  Can i simpley classifiy image in two class. water and non water ? and for that how many samples we have to select . All other classess like builtup , vegetation , fallow land are to be merges in a single class ? please answer.

• 
  @spaceremotesensingandgis56264 ай бұрын

  It depends on the quality of the results. Typically, we start with 20 samples per class. If the results are not satisfactory, we can increase the number of samples accordingly

• 
  @ganeshragade44394 ай бұрын

  I want do multifeature and multiple segmentation of high spatial resolution image. Can you suggest methodology

• 
  @spaceremotesensingandgis56264 ай бұрын

  For multi-feature and multiple segmentation of high spatial resolution images, you can follow these general steps: 1. Image Preprocessing - Correct any geometric or radiometric distortions in the image. - Enhance the image quality if needed (e.g., noise reduction, sharpening). 2. Feature Selection: - Choose relevant features for segmentation, such as texture, color, and shape. - Use techniques like Principal Component Analysis (PCA) to reduce the feature space if necessary. 3. Segmentation: - Perform initial segmentation using one or more feature sets. - Consider using algorithms like K-means, Mean Shift, or Watershed for initial segmentation. 4. Merge Segmentation Results: - Combine the results of initial segmentations to create a more accurate segmentation map. - Use techniques like region merging or object-based methods. 5. Post-Processing: - Refine the segmentation results to remove small or non-relevant segments. - Smooth the boundaries of segments for better visualization. 6. Validation: - Validate the segmentation results using ground truth data or expert knowledge. - Assess the accuracy of the segmentation using metrics like IoU (Intersection over Union) or F1-score. 7. Iterative Refinement - If the results are not satisfactory, iterate through the process by adjusting parameters or adding/removing features. 8. Documentation - Document the methodology, parameters used, and results obtained for future reference. Remember, the choice of specific methods and parameters will depend on the characteristics of your image and the objectives of your segmentation task.

• 
  @josergztech4 ай бұрын

  Help, the problem i am facing is when I am doing certain processing like remove thermal noise .New layer is added in the content pane but it is not visible in the map layer.

• 
  @spaceremotesensingandgis56264 ай бұрын

  may be data issue try with some other downloaded fresh data. I hope it will be fine.

• 
  @josergztech4 ай бұрын

  @@spaceremotesensingandgis5626 The problem was solved by redownloading the data, now, could you give me advice on doing flood mapping using sar images and deep learning in arcgis??? Help

• 
  @alphaalpha84994 ай бұрын

  How mosaic layers if we have more then 1 layer

• 
  @spaceremotesensingandgis56263 ай бұрын

  You need to do histogram equalization over all data before doing mosaic

• 
  @hikikomori694 ай бұрын

  Thank you!

• 
  @spaceremotesensingandgis56264 ай бұрын

  You welcome

• 
  @user-px2of1li2z4 ай бұрын

  What software are you using other than ArcGIS Pro

• 
  @spaceremotesensingandgis56263 ай бұрын

  ArcGIS Pro, ArcMap, ArcGIs Online and ArcGIS potral, ENVI, Sarscape, QGIS , SNAP and google earth engine,

• 
  @user-po9nj3pv4r4 ай бұрын

  What is ground data? but the vedeo is okay I have liked if

• 
  @spaceremotesensingandgis56263 ай бұрын

  That was ground water temperature data

• 
  @Kiwinov4 ай бұрын

  How do I download data in bulk?

• 
  @spaceremotesensingandgis56264 ай бұрын

  I will check and let you know soon.

• 
  @santanusarkar24264 ай бұрын

  sir make a video on soil erosion in ArcGIS

• 
  @spaceremotesensingandgis56263 ай бұрын

  will do it soon

• 
  @aswin19745 ай бұрын

  Bro in my arc there is no animation option.. Please help

• 
  @spaceremotesensingandgis56265 ай бұрын

  It is there under view there is one add button when you click that you will get animation tab.

• 
  @uma91835 ай бұрын

  tree density and tree height mapping using satellite data

• 
  @spaceremotesensingandgis56265 ай бұрын

  Sure I will try to make a video on that

• 
  @anandksahu1235 ай бұрын

  Nice explanation

• 
  @spaceremotesensingandgis56265 ай бұрын

  Thanks for liking