What do you think about Asus Vivobook 16X? Please reply me?
@hmoazedАй бұрын
Shapr3D doesn't support parametric modeling, that right there is a non-starter for me. Fusion 360 does, but it is clunky, buggy (I have to restart it every 20 minutes because random basic functionality just stops working, and it crashes a few times a day), and lacks some features OnShape has like using measurements as parameters, but as a startup you can use it for free (you have to apply). Then there is OnShape, another parametric CAD app, not buggy and clunky as Fusion, but holy crap, $1500 a year? They do have a program for startups though, you can apply and get OnShape Professional for free. Solidworks is another option, they also give it for free to startups (revenue less than $1M) but no MacOS support. I could run it on my Windows desktop and Remote Desktop to it from my Mac, but then I'm afraid the user experience will suffer (trackpad gestures, etc.).
@johnwebb29843 ай бұрын
Can you provide what kit you purchased to build your CNC?
@HandsonCNCАй бұрын
The CNC frame and mechanical components are an Avid CNC... The electronics weren't from a kit.. I built them out myself.
@robotadventures3 ай бұрын
its great to see a couple assembling it. TRON XY! they got so much crap on release of the X5SA. I have one myself.. since converted to a laser engraver. good luck with this monster. how will you recover the costs of prints?
@HandsonCNCАй бұрын
The electronics and controller seem to be its downfall.. and the glass wasn't flat enough to print :-/..... I am converting to klipper with a BTT Kraken control board and a very flat aluminum plate for my bed.
@rickycampbell91053 ай бұрын
Great looking machine, But every time I see it. All I can think about, Is the crazy amount print time it will take to do a full print in that thing. Not to mention, The amount of filament that will be wasted on a failed print. Really nice looking machine though.
@HandsonCNC3 ай бұрын
yah, nothing fast happens with a machine line this... One thing of note is no one runs a machine like this at .02 mm layer heights... I have nozzle sizes up to 1mm so .25 or even .5mm layer heights are reasonable. As for wasted filament 100% true... It is a risk for all large format printers I have been looking into pellet extruders which would allow using recycled plastic easier and make material a LOT cheaper..
@HandsonCNC3 ай бұрын
I really got to figure out how to know before the gopro dies... It was a stopping point for me as the next step requires multiple people.
@Listenupjd3 ай бұрын
There may be only be one watching the live, but I'm watching it after-hand so 2 is better than 1.
@HandsonCNC3 ай бұрын
sorry the stream died when the battry on the camera died..... also soo many studders will get a better way to stream for the next one..
@JustinAlexanderBell4 ай бұрын
How much was it if you don't mind?
@HandsonCNC4 ай бұрын
all in delivered, thru customs, and rigged it was about the price of a Honda CRV.... I've sense added compressed air which is about the price of a new sports bike..
@kainshaw4 ай бұрын
Intereting iPad case, can you share more info on that? thanks!
@radenco_elektronika_automatika5 ай бұрын
I have a SkyfireVMC (SVM-2V) machine with CNC4640+FCNC4M, from 2016. And the system crashed, and I reinstall the system, but I lose all the parameters. Can anyone help me get the parameters? Thank you
@HandsonCNCАй бұрын
I feel you... I converted over to Linux CNC a few years back but here are photos of my configs during that migration: drive.google.com/file/d/1Vx7JEHmholLObXwev_nHWf9iWUsEVTx2/view?usp=sharing Now keep in mind, no warranty or promise they will work for you.. They were just what my machine had when I made that change.
@mrwonk7 ай бұрын
For openly admitting to reading instructions; I'm going to have to ask you to turn in your man card.
@doug_EX8 ай бұрын
2500$ per year if you want to render. This is insane.
@Foomanlol8 ай бұрын
Lol. "That sucks, lets get you a new one" is basically the best customer service you can get dude. Perhaps you wanted to figure it why it blew, but its cheaper for them to just replace it and if it becomes a persistent problem then they will look into it more.
@wyqid9 ай бұрын
Onshape makes all your designs public domain, which means that although you cannot patent them, you can use them commercially. Regardless of the license agreement says in the previous section about non-commercial use, the later section of the same agreement states they are public domain and can be used for commercial use by anyone. Anyone includes you.
@andreasbrunnhofer9 ай бұрын
Come on, use some proper mesurements. Stupid imperial system. And its not a hsk system, its iso or bt.
@forrestmcbride190310 ай бұрын
Happy Birthday Tanya and AlysAnne! 🎉
@arthureunson363911 ай бұрын
Did you create the m6 macro in Lua? I have just moved from Mach3 to Mach4 and struggling to get the tool change working as well as it was.
@petrasvestartas4359 Жыл бұрын
Do you thing it is possible to mount Clearpath motor from the motor chassis itself? I know that there are typical 4 screws form nema23 motors, but are there any other mounting possibility outside those?
@thatgirl6671 Жыл бұрын
Thank you! I just had this problem a couple of days ago. You rock!!!
@alimjassimmahmood Жыл бұрын
Sir can I have more about this CNC
@camt1818 Жыл бұрын
Perhaps I missed it, but what acceleration do you run on the z axis? And max feed too while I'm asking (avid says "200+ ipm" so I'm sticking to 200 haha).
@shadowr2d2 Жыл бұрын
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great work 🎉. I’m new to 3D modeling myself. Looking to make my own computer 🖥️ case. That looks like a Star Wars spaceship 🚀. I will keep following you. Have a great day..
@johnross3752 Жыл бұрын
What did you use for the motion controller
@Pixelplanet5 Жыл бұрын
and here we are 3 years later, 1year+ away from production and its just gonna have one huge fucking wiper blade thats super ugly. none of the scify nonsense every Tesla channel was talking about has happened at all.
@marckart66 Жыл бұрын
My dell vostro laptop lasted 7 years. I need a laptop for offline work. This idea is great but I need to work in areas without Internet...
@gregheinrichs1419 Жыл бұрын
I could really do without the music.
@craigcorbin4098 Жыл бұрын
Opendesk's Download Page is down. Does anyone have any of the files they can share?
@JacekWyrebkiewiczAI Жыл бұрын
a wycieraczki już są 🤣😂 kzread.info/dash/bejne/enZ-pNKHkquvado.html
@phildalgleish2381 Жыл бұрын
I really like cnc informative videos... BUY... this isn't a concert... not entertainment channel ... its a technical teaching and learning vid... and I really want to like it...but I can't hear the sounds the machine is making because of the music.... Not trying to chap you or be negative, but Please make your vids with NO music to clutter up a very nice learning experience... Thank You
@nephtalisabiti1844 Жыл бұрын
hi there, Can i use this to read an input and turn on a solenoid ?
@lophole72 жыл бұрын
Very nice rig you have there. Just got my hands on one as well . Do you happen to have a setup sheet of your inverter and of mach 3? I can't seem to get the spindle to spin clockwise. Or read rpm in the spindle tab. This thing is driving me crazy!!
@Totalrandomness20112 жыл бұрын
Would this spindle work with the onefinity journeyman?
@beachboardfan95442 жыл бұрын
Hows this spindle holding up for you? I have a small bridgeport I'm looking to cnc convert and was looking at the fm30f.
@dylandesmond2 жыл бұрын
I clocked 20gb of ram on fusion 360 last night on 1 start night. I've got 128gb 3600mhz ram running at 3733mhz I'm running a 10900k at 5.4ghz on all 10 cores. In my settings in fusion I'm using all 10 cores. I've hit all 10 cores at 100% once... I'm running a water-cooled 2060 graphics card. It's running 10% higher than standard clocks... I get no issues... I've tried shadow servers. Their computers can't do my work. For simple cad I use a $150usd laptop. I'm doing cam with millions of triangles in the meshes. Their machines cannot keep up with what I do.
@geroooxgogoogogo958 Жыл бұрын
Sry man but can i ask u a question i have a laptop with a i7 11370h 16gb ram and rtx 3060 but when i try to extrude like an svg with above 300 selection fusion 360 is not responding does buying a 3000$ desktop computer while help a lot ?
@cosmos18052 жыл бұрын
Ногти постриги...
@thatonesnowboarde2 жыл бұрын
Never had a laptop last more than 2 1/2 years?? What kind of laptops are you buying?
@justinhough41922 жыл бұрын
Do you think you went too large on the Teknics?
@jonjon38292 жыл бұрын
these spindles are way overpriced
@norbertbogaj68682 жыл бұрын
Hello, do you have ant contact to Skyfire CNC?
@JbotMischief2 жыл бұрын
Hey, are you still running this machine? Still happy with the teknic servos?
@desertdweller64082 жыл бұрын
I have a Chinese 80mm water cooled spindle. It is very quiet. Would you consider this quieter than your Chinese spindle was? Was your Chinese one liquid or air cooled? Thanks.
@HandsonCNC2 жыл бұрын
Yes it is quieter than my water-cooled chinses spindle for sure..
@JohnM-sz2vh2 жыл бұрын
So if it was a good cut, you would feed it to your dog? Yikes. kzread.info/dash/bejne/ZKV72JukgLuWlcY.html 🤔
@joelstolarski22442 жыл бұрын
My Fusion 360 laptop just broke down. Shadow is now $29. 99. I'm on the hobby version of Fusion 360. Unsure how to install.
@jacobguilbert28772 жыл бұрын
Hello! Great video! I am getting my ducks in a row for an avid purchase and I would really like ATC capabilities and so far this looks like a terrific option. Question.. How does the 3hp handle spindle handle surfacing operations with a 2 1/2" surfacing bit? And full depth cuts through 3/4" plywood with something like a 3/8" end mill? I am currently running a 12hp spindle at work and now want to purchase a machine for personal use that is within my budget. I just want me make sure the 3hp can keep up with the kind of work I will be doing. Thanks in advance!
@HandsonCNC2 жыл бұрын
I think you are going to find the rigidity of the machine and the strength of your steppers are going to be a limiting factor before 3hp becomes a limiting factor... As for your two example scenario. Surfacing is more than fine.. And I have never done full depth cuts on this machine so I can't answer that...
@markfromwestcoastwoodcraft76332 жыл бұрын
Dat don suck, ok I got it
@donaldo200320032 жыл бұрын
Do you have anymore information on adding/programming the HLFS from the Clearpath Servos?
@shokk19672 жыл бұрын
Onshape is free for hobbyists. So it depends on your level really. I'm learning cad at the minute, on shape runs great on my laptop, and my tablet. I can't find another cad package that let's me practice on a computer and tablet for free.
@brockrobertson6172 жыл бұрын
I have an Avid CNC now and would love a probe like this. How is yours connected to Avids control box? I don’t see a wire anywhere coming off the probe? Thanks!
@HandsonCNC2 жыл бұрын
The probe is wireless, its got batteries in it, and then the receiver has 5v + a signal... I moved since I did this and have been in "get everything back up and running as a hobby" so I can't go check but it is pretty trivial as long as you have an open pin for a probe switch.
Пікірлер
What do you think about Asus Vivobook 16X? Please reply me?
Shapr3D doesn't support parametric modeling, that right there is a non-starter for me. Fusion 360 does, but it is clunky, buggy (I have to restart it every 20 minutes because random basic functionality just stops working, and it crashes a few times a day), and lacks some features OnShape has like using measurements as parameters, but as a startup you can use it for free (you have to apply). Then there is OnShape, another parametric CAD app, not buggy and clunky as Fusion, but holy crap, $1500 a year? They do have a program for startups though, you can apply and get OnShape Professional for free. Solidworks is another option, they also give it for free to startups (revenue less than $1M) but no MacOS support. I could run it on my Windows desktop and Remote Desktop to it from my Mac, but then I'm afraid the user experience will suffer (trackpad gestures, etc.).
Can you provide what kit you purchased to build your CNC?
The CNC frame and mechanical components are an Avid CNC... The electronics weren't from a kit.. I built them out myself.
its great to see a couple assembling it. TRON XY! they got so much crap on release of the X5SA. I have one myself.. since converted to a laser engraver. good luck with this monster. how will you recover the costs of prints?
The electronics and controller seem to be its downfall.. and the glass wasn't flat enough to print :-/..... I am converting to klipper with a BTT Kraken control board and a very flat aluminum plate for my bed.
Great looking machine, But every time I see it. All I can think about, Is the crazy amount print time it will take to do a full print in that thing. Not to mention, The amount of filament that will be wasted on a failed print. Really nice looking machine though.
yah, nothing fast happens with a machine line this... One thing of note is no one runs a machine like this at .02 mm layer heights... I have nozzle sizes up to 1mm so .25 or even .5mm layer heights are reasonable. As for wasted filament 100% true... It is a risk for all large format printers I have been looking into pellet extruders which would allow using recycled plastic easier and make material a LOT cheaper..
I really got to figure out how to know before the gopro dies... It was a stopping point for me as the next step requires multiple people.
There may be only be one watching the live, but I'm watching it after-hand so 2 is better than 1.
sorry the stream died when the battry on the camera died..... also soo many studders will get a better way to stream for the next one..
How much was it if you don't mind?
all in delivered, thru customs, and rigged it was about the price of a Honda CRV.... I've sense added compressed air which is about the price of a new sports bike..
Intereting iPad case, can you share more info on that? thanks!
I have a SkyfireVMC (SVM-2V) machine with CNC4640+FCNC4M, from 2016. And the system crashed, and I reinstall the system, but I lose all the parameters. Can anyone help me get the parameters? Thank you
I feel you... I converted over to Linux CNC a few years back but here are photos of my configs during that migration: drive.google.com/file/d/1Vx7JEHmholLObXwev_nHWf9iWUsEVTx2/view?usp=sharing Now keep in mind, no warranty or promise they will work for you.. They were just what my machine had when I made that change.
For openly admitting to reading instructions; I'm going to have to ask you to turn in your man card.
2500$ per year if you want to render. This is insane.
Lol. "That sucks, lets get you a new one" is basically the best customer service you can get dude. Perhaps you wanted to figure it why it blew, but its cheaper for them to just replace it and if it becomes a persistent problem then they will look into it more.
Onshape makes all your designs public domain, which means that although you cannot patent them, you can use them commercially. Regardless of the license agreement says in the previous section about non-commercial use, the later section of the same agreement states they are public domain and can be used for commercial use by anyone. Anyone includes you.
Come on, use some proper mesurements. Stupid imperial system. And its not a hsk system, its iso or bt.
Happy Birthday Tanya and AlysAnne! 🎉
Did you create the m6 macro in Lua? I have just moved from Mach3 to Mach4 and struggling to get the tool change working as well as it was.
Do you thing it is possible to mount Clearpath motor from the motor chassis itself? I know that there are typical 4 screws form nema23 motors, but are there any other mounting possibility outside those?
Thank you! I just had this problem a couple of days ago. You rock!!!
Sir can I have more about this CNC
Perhaps I missed it, but what acceleration do you run on the z axis? And max feed too while I'm asking (avid says "200+ ipm" so I'm sticking to 200 haha).
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great work 🎉. I’m new to 3D modeling myself. Looking to make my own computer 🖥️ case. That looks like a Star Wars spaceship 🚀. I will keep following you. Have a great day..
What did you use for the motion controller
and here we are 3 years later, 1year+ away from production and its just gonna have one huge fucking wiper blade thats super ugly. none of the scify nonsense every Tesla channel was talking about has happened at all.
My dell vostro laptop lasted 7 years. I need a laptop for offline work. This idea is great but I need to work in areas without Internet...
I could really do without the music.
Opendesk's Download Page is down. Does anyone have any of the files they can share?
a wycieraczki już są 🤣😂 kzread.info/dash/bejne/enZ-pNKHkquvado.html
I really like cnc informative videos... BUY... this isn't a concert... not entertainment channel ... its a technical teaching and learning vid... and I really want to like it...but I can't hear the sounds the machine is making because of the music.... Not trying to chap you or be negative, but Please make your vids with NO music to clutter up a very nice learning experience... Thank You
hi there, Can i use this to read an input and turn on a solenoid ?
Very nice rig you have there. Just got my hands on one as well . Do you happen to have a setup sheet of your inverter and of mach 3? I can't seem to get the spindle to spin clockwise. Or read rpm in the spindle tab. This thing is driving me crazy!!
Would this spindle work with the onefinity journeyman?
Hows this spindle holding up for you? I have a small bridgeport I'm looking to cnc convert and was looking at the fm30f.
I clocked 20gb of ram on fusion 360 last night on 1 start night. I've got 128gb 3600mhz ram running at 3733mhz I'm running a 10900k at 5.4ghz on all 10 cores. In my settings in fusion I'm using all 10 cores. I've hit all 10 cores at 100% once... I'm running a water-cooled 2060 graphics card. It's running 10% higher than standard clocks... I get no issues... I've tried shadow servers. Their computers can't do my work. For simple cad I use a $150usd laptop. I'm doing cam with millions of triangles in the meshes. Their machines cannot keep up with what I do.
Sry man but can i ask u a question i have a laptop with a i7 11370h 16gb ram and rtx 3060 but when i try to extrude like an svg with above 300 selection fusion 360 is not responding does buying a 3000$ desktop computer while help a lot ?
Ногти постриги...
Never had a laptop last more than 2 1/2 years?? What kind of laptops are you buying?
Do you think you went too large on the Teknics?
these spindles are way overpriced
Hello, do you have ant contact to Skyfire CNC?
Hey, are you still running this machine? Still happy with the teknic servos?
I have a Chinese 80mm water cooled spindle. It is very quiet. Would you consider this quieter than your Chinese spindle was? Was your Chinese one liquid or air cooled? Thanks.
Yes it is quieter than my water-cooled chinses spindle for sure..
So if it was a good cut, you would feed it to your dog? Yikes. kzread.info/dash/bejne/ZKV72JukgLuWlcY.html 🤔
My Fusion 360 laptop just broke down. Shadow is now $29. 99. I'm on the hobby version of Fusion 360. Unsure how to install.
Hello! Great video! I am getting my ducks in a row for an avid purchase and I would really like ATC capabilities and so far this looks like a terrific option. Question.. How does the 3hp handle spindle handle surfacing operations with a 2 1/2" surfacing bit? And full depth cuts through 3/4" plywood with something like a 3/8" end mill? I am currently running a 12hp spindle at work and now want to purchase a machine for personal use that is within my budget. I just want me make sure the 3hp can keep up with the kind of work I will be doing. Thanks in advance!
I think you are going to find the rigidity of the machine and the strength of your steppers are going to be a limiting factor before 3hp becomes a limiting factor... As for your two example scenario. Surfacing is more than fine.. And I have never done full depth cuts on this machine so I can't answer that...
Dat don suck, ok I got it
Do you have anymore information on adding/programming the HLFS from the Clearpath Servos?
Onshape is free for hobbyists. So it depends on your level really. I'm learning cad at the minute, on shape runs great on my laptop, and my tablet. I can't find another cad package that let's me practice on a computer and tablet for free.
I have an Avid CNC now and would love a probe like this. How is yours connected to Avids control box? I don’t see a wire anywhere coming off the probe? Thanks!
The probe is wireless, its got batteries in it, and then the receiver has 5v + a signal... I moved since I did this and have been in "get everything back up and running as a hobby" so I can't go check but it is pretty trivial as long as you have an open pin for a probe switch.
Try free cad it’s not on mobile tho